SAP generated Emails to workflow adminitrator: Changing the text
Hello all.
We have configured the 'Event Queus Administration' to send an email to the Workflow Administration if there is an Even Linkage error. My question is does anyone know where SAP sources the mail content from. I need to change the body text so that it is more user friendly to the end user.
Many Thanks
Paul Swinnerton.
Thanks for your reply.
My workflow is not generating the email. It is SAP standard to send an email if an event linkage error is caught by the "Event Queue Administarion' tool. I just want to know where SAP gets the text that is contained in the body of the email. I'm guessing it may be stored in a table somewhere or there is a specific task with placeholders embedded into the task description. Am bleeding profusely after repeatedly hitting my head agianst the wall with this one.
Many Thanks
Paul
Similar Messages
-
How to change the text mail of Workflow Notification?
Hi all,
I would like to change the text mail of workflow notification. I took a look at the Help Sap and saw how to customize the text mail notification. Unfortunately, I could not found the text for workflow Notification at notificationTexts_<language>.properties.
Is possible to change the text mail of Workflow Notification?
Thanks in advanced,
Alcides FlachHi Alcides,
Please refer to the following link.
https://www.sdn.sap.com/irj/sdn/thread?threadID=40700
Rajiv -
How do I change the text on a label for a SAP delivered WD view
Hi,
I need to change the text that is being displayed for a label in a SAP delivered WD ABAP View. When I look at the properties for this label, the Text property is currently empty, so I assume that the text that is being displayed in the view is coming from the dictionary. I was hoping to change the text of the label via the Enhancement Framework. I created an OTR entry, then went into SE80 for the WD Component, I navigated to the view in question, I pressed the Enhance button and entered $OTR:<package>/<alias name> in the text property for the label. Finally I saved and activated and was prompted to create an Enhancement Implementation, which I did and I selected it. Everything seems to be fine (no errors or warnings). I then ran the WD application. My change was not there. I then went back into SE80 for the WD Component that I created the enhancement. I navigated to the View and looked in the text property of the label and saw that my change was not there. I repeated this process several times and each time when I added the OTR entry to the text property of the label, it saves and activates without issue (in enhancement mode), but when I run the WD App the change does not show up and when I go back to the WD View, my change to the text property is gone. I know that if I really wanted to I could register the object and add the OTR entry to the text attribute of the label, but I am trying to perform this change using a modification free enhancement. Can this be done via an Enhancement, or do I have to register the object and make my change using a modification?Hi Gregg,
excellent question. I had the same problem as well before.
What I have learned is that you cannot change a UI Element via Enhancements.
You can add new UI Elements (e.g. new label) or remove existing elements, but you cannot change them (except the layout properties (e.g. colspan) maybe).
The only possibilities I see is
1. Remove the existing label, and add a new label with your desired text
2. Do it as a modification
3. Do it as a configuration (This means you go to the webdynpro application in SE80, right click and select "Create/Change Configuration)
4. Do it as customizing (This means you add the URL parameter sap-config-mode=X to the URL, navigate to the label, right click on it, and select "Change Settings for Current Configuration").
The disadvatages of 3) and 4) are
- texts in configurations and customizing are not translatable (as far as I know)
- if you have multiple configurations, you have to change the label multiple times
Hope this helps a bit,
Daniel -
RSS Feed from rss generator's new app has changed the feed. Now the description of apps is not showing. the rest is the same. Anyone has an idea why ? and how do I get the description? if I fetch it from itunes pages would that be considered violation of apple's terms and conditions? Please help
See this post.
tt2 -
Changing the text of Text field in standard SAP transaction.
Hi expert,
I have a requirement in which i have to change the text of Text field in standard SAP transaction.
Is it possible? If so, how?
Any pointers will be highly appreciated.Hi,
I think you want to change the field label of the text field.
For ex in tcode MM01, you can change the field label of Material text field.
The description of the field label comes from the data element it is associated with. To change the text of the field label, you have to change the field label of the data element.
But it will effect all the fields associated with this data element.
To change the field label of the data element go to tcode CMOD. Then click on GOTO->TEXT ELEMENTS->KEYWORDS->CHANGE.
Then enter the data element which is to be changed. In the next screen, change the field label and save it.
Regards,
Vinod -
HT6170 i cant enter that email how do you change the rescue email
i cant enter that email how do you change the rescue email
Hi Raven ...
Help here > Manage your Apple ID primary, rescue, alternate, and notification email addresses -
Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid
Hey Lukas Schmid,
The following resource may provide more help in troubleshooting Mail for OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
For more information, you can also visit http://www.apple.com/support/mail/
Thanks,
Matt M. -
How to change the text in a browser title bar?
I'm new at flash and I'm finding most things obvious, but
this is one I just can't figure out!
How the dickens do you change the text that shows in, say, an
Internet Explorer window?
Is it by filename? Mine, the index page, currently shows as
the exciting and unprofessional "index"
I've taken over the work from someone else who I'm not able
to contact (I know, that NEVER happens /sarcasm) so I'd appreciate
any help I can get.
Thanks.
Nickandsoitgoes,
> When publishing the flash file, there is an option to
export
> the HTML document along with the flash file.
Yes.
> I see no way to edit the HTML itself. How can I edit the
> HTML template that's published?
Depending on where you specify that file's location (which
you can also
set for the SWF itself), you navigate to that folder, then
edit the
resultant HTML file in whatever text editor you please, from
Notepad/TextMate to Dreamweaver.
If you're asking how to edit the template Flash uses to
generate this
file, you can find that (at least, on Windows) at this
location:
C:\Program Files\Adobe\Adobe Flash CS4\en\First Run\HTML\
Be warned, however, that these template files, though
HTML-based, are
heavily programmed with JavaScript and a number of custom
tokens that get
populated by Flash when it goes through the publish process.
For example,
in the Default.htmll file inside this folder, you'll see a
<title> tag whose
content reads "$TI" (without quotes). Think of that as a
varible. That
gets populated with the the name you've given the FLA file,
simply because
$TI arbitrarily refers to the file name in this scenario. You
can change
this if you like, but if you do, make sure to safe it as a
new file (or at
least back up the original templates that ship with Flash).
> Does that make a bit more sense? :)
Only if I've properly understood your question! If I still
haven't,
please try again. :)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870> -
How to change the text of label dynamically
Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak. -
How to change the text of the standard ALV button?
Hallo everybody,
WebDynpro ALV has its own buttons e.g. Export, Is it possible to change the text "Export" as own text 'SaveInExcel' ?
Many thanks,
MeerAnswer to this question:
Wenn der Typ des Oberflächenelements in der Toolbar oder seine Beschriftung vom Standard abweichen sollen, lassen Sie zwar die ALV-Standardfunktion zu, blenden jedoch das zugehörige Oberflächenelement aus. Stattdessen erzeugen Sie eine selbstdefinierte Funktion und weisen ihr die gewünschte ALV-Standardfunktion zu.
Folgende Oberflächenelemente für ALV-Standardfunktionen können Sie auf diese Weise ersetzen:
● Dropdown-Listbox Senden sowie die einzelnen Einträge der Dropdown-Listbox
● Dropdown-Listbox Anzeigen als sowie die einzelnen Einträge der Dropdown-Listbox
● Drucktasten Zeile einfügen, Zeile anhängen und Zeile löschen
● Drucktaste Prüfen
● Drucktaste Rückgängig
● Drucktasten Excel und Druckversion
● Drucktaste Filter sowie die Einzelfunktionen Filter definieren und Filter löschen
● Drucktaste Einstellungen sowie die Einzelfunktionen Dialogfenster Einstellungen öffnen und Dialogfenster Einstellungen schließen
● Dropdown-Listbox Sichten
Um einer selbstdefinierten Funktion eine ALV-Standardfunktion zuzuweisen, verwenden Sie Methoden der Klasse CL_SALV_WD_FUNCTION.
sap help -
How to change the text under RECORD WORKING TIME IN ESS.
Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy -
How do change the text color in the variable screen ?
Hi Experts ,
I would like to know about , How do change the text color in the variable screen ?
Using web templates (Analytical) can get the output. It has the variable screen contains 6 fields (Company code, Country , Region , COB, Plant and Purchasing Group). I want to make RED color text on Plant. Please help me .
Thank you ,
Prasad.Hi,
I am looking for nearly the same. What I have found is that it seems to manipulate the SAP theme that is used in standard when template is executed in the portal. Just display the source code of the HTML and there you will see the included SAP theme (normally SAP_TRADESHOW). Then you have to go to the SAP portal and change this stuff. But for that you have to know where to find it and what impact this change has.
I am not pretty sure if this is the right way. But as I want to change the standard layout of a whole template to a customer specific layout I think there is no other way in BI7.0.
Regards,
Peter -
Can we change the text in PanelCollection -- default toolbarItemDisplay ?
Hi ,
In the Panel Collection, we have a table inside. The panel collection provides the default icons like a search button and a Detach button.
By default the text in Detach button is appearing as "Maximise" always. Even when the screen is maximised the text is the same.
I want to change the text to "Minimise" when the screen is maximised. Is this possible?
Thanks
Dinesh
Edited by: 845905 on May 4, 2011 12:13 AME-mails generated with that function module are created in plain text format. The font that would appear when reading the e-mail would be dependt on the user's setting for the e-mail application (e.g. Outlook).
To my knowledge, the font cannot be affected during it's creation.
Hope this sheds some light on your issue.
-Mark -
How to change the text in the legend of a graph programmat​ically in labview
I have many graphs in one plot and want to show the legend the name of the graph (i.e. the filename). How do I change the text in the legend programmatically?
Create a property node for your graph. Use the property node "Active Plot" to define which plot (or line) you want to rename. Then write the new legend label to the property node "Plot.Name". See attached.
Tim
Attachments:
legend.vi 12 KB
Maybe you are looking for
-
I have loads of music both purchased and loaded from my CDs stored in itunes on my PC Im running Windows XP, the music is also on my ipod Nano. How do I get the library complete onto my ipad and iphone. I have also purchased Cloud storage with Know
-
Addition of Start & end date fields in the View 'My team's open leads' .
Dear all, I want to add Lead Sart date & Expected End date in the personalize list of view 'My team's open Leads' in the Overview page of Lead management I tried it by changing the field name in PDVField as
-
Data source and infocube in BC
Hi all, I have some basic questions related to BC, How to identify the IC for the given Data source?/How to identify the Data source for the given IC? Can we assign more than one data source to one info cube?
-
Why does my iPod not change to Landscape view
My iPod Touch will not display in the landscape mode in most applications. When displaying photos it will switch to the Landscape mode, but will not in Calendar, Notes, and other apps. Is there a setting I have set improperly?
-
Computer does not start up when connected to My Book 4TB
When I connect MY Book (4TB) to my computer before turning it on, my computer does not start up. I only get a black screen. If I disconnect the My Book and then first start up my computer, I am able to plug in My Book and read all the files, backup