SAP Global Rollouts

I was hoping to get some industry advice.
I have a client who is working on a Global SAP Roll out and I was hoping to find out what interest there is from industry professionals working as SAP Functional Consultants, Project Managers and Management Consultants to work on Global SAP Programmes.
Are SAP Professionals interested in this type of project?
*Closed as breaches the rules of engagement for SAP forums.*
Edited by: Jason Boggans on Apr 4, 2011 10:07 PM

hi
These are the key factors need to be considered .
1.General configuration has been done for all the plants which you are rolling out.
2.Master data has to be prepared for the each individual plants.
3.If there are some specific requirements for any plant that you need to configure seperatly.
4.Make sure that all the master data preparation follow the parent plants which you are already implemented.
5.Contact the user for the related plants is there any specific requirement to be considered.
6.Configuration issues in the sence its depending on the requirement of the business.If it is already configured its ok other wise we need to configure based on the requirement.
Hope that above points are helpfull.
Regards
Suman Kumar

Similar Messages

HI all ,i am involving into sap hcm om,pa global rollout project for 6 countries.

om pa global rollout project for 6 countries, i have 6 company codes. how can i maintain number ranges for om objects with 6 company codes.
company code1     : om object number ranges from 1 to 10
company code2     : om object number ranges from 11 to 20
company code3     : om object number ranges from 21 to30
co code 4               : om object number ranges from 31 to 40
co code 5               : om object number ranges from 41 to 50
co code6                : om object number ranges from 51 to 60
how can i do this configuration.can you plz help me?

Hi Anand,
Standard SAP doesn't allow to differentiate between organizational numbers at company codes level. I think you would need to build user exit for the same.
SPRO> Personnel Management > Organizational Management > Basic Settings > Maintain Number Ranges > Customer Enhancement (User Exit): Individual Number Assignment
I hope this information helps.
Thanks and regards,
Vivek Barnwal

Query on Global Rollout Landscape Strategy

Dear All,
I need some information about Global Rollout.I am working in SAP BASIS.I need to finalize the system landscape.The query is,what would be our approach to implement the global template using solution manager:
1. Separate Implementation at two different sites(Location1 and Location2) with two sets of servers (DEV,QAS & PRD) with common solution manager between both the location where the solution manager will be working as a common server between (DEV1 & DEV2,QAS1 & QAS2,PRD1 & PRD2 respectively),so that the global template package can be transported from Location1 to Location2 by using Solution Manager.
So Total no of servers will be 7 (two sets of DEV,QAS,PRD & 1 solution manager).
2. Implementation with only one set of server (DEV,QAS,PRD) and solution manager at Location1. And only one Production server at Location2 so that the developed global template is common between both the location by solution manager.After developing local components at different clients (for different locations) at DEV,testing at QAS and transporting to PRD1,the global template is transported to PRD2.
So Total no of servers will be only 5 ( one set of DEV,QAS & 2 PRD,one solution manager)
Please guide.I need your help so that can finalize this asap.
Waiting for your reply,
Thanks & Regards,
Sandipan

Hi Sandipan,
Always a pleasure to hear Global Rollout use
First, I will comment on the number of Solution Manager instances.
If there is no particular need for two separate instances of Solution Manager and the different Geographies/ Businesses involved are happy to share 'content' from same Solution Manager instance, you just need one Solution Manager.
With Global Template Rollout based out of one Solution Manager instance, things can be a lot more simpler. For example,
- you don't have to think about 'transporting' templates from source SolMan instance to target SolMan instance to provide periodic updates; they become available 'perpetually' for all Implementation Projects within the single instance
- you don't have to activate 'Change Requests' to capture the structure and content assignments in the project. Often, people find this to be very time consuming
Please go through SAP Note 603336, if you haven't done already. This is very important to read.
As regards the number of DEV, QAS, PRD you must have for Satellite Systems, it's entirely dependent on the way your programme requirements are. I would believe PRD to one, though the other boxes in between could vary as per needs.
As for SolMan, you need to have just one instance running to cover Template Project and all Rollouts based on that.
Best regards,
Srini

AMS landscape, SAP global tables blocking

Hi all,
we are planning quite few SAP sequential rollouts. It seems that additional AMS system (for bug fixing only) is necessary. So eventually we will have 2 different development systems: Dev for projects and AMS for bug fixing. It is so that this approach requires more discipline of work. Some customizing/development activities should be blocked in Dev but not in AMS and vice versa. The question is u2013 have you ever met such an solution to block all the SAP global tables on a certain SAP system? (to prevent people from modifying it in parallel on both Dev and AMS).
Thank you in advance.
Regards
TT

Hi
It's possible.
2 options
a. You may separate the users and with authorizations using roles/profiles
b. You can lock the system using both SCC4 (client specific) & SE06 (Global Object level)
Regards
Sekhar

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

No rfc destination is defined in SAP Global Trade Services

when doing MB1C transaction the above mentioned error is displayed(errror: No rfc destination is defined in SAP Global Trade
Services ).doing MB1C transaction through movement type 561 the system is accepted,but through MT 501 when we are doing
the process, the system will generate the aove mentioned error.pls give the correct solution.
regards
Maran

Re: Getting dump MESSAGE_TYPE_X while posting in MIGO

No RFC destination is defined for SAP Global Trade Services

Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59 Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
Ramji

Hi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji

GTS200 - Configuration of SAP Global Trade Services

FYI...
GTS200 schedules are not out yet, they expect to have some in fall 2008.
http://www.sap.com/usa/services/education/usacourse.epx?context=%5b%5b%7cGTS200%7c%7c1%7c072%7cUS%5d%5d%7c
The 1-888-777-1727 number is currently taking details of interested people.

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

SAP Global Roll out-MM/WM

hi all.,
1. Working on a SAP Global Roll out project, can anyway educate me on the Pitfalls to avoid specifically in MM and WM configuration.
2. Also what are the areas to concentrate during configuration for Global Roll-out.
I have listed out a few points which i think is relevant, if there are others to be considered, do let me know.
a. Currency conversion between the different countries.
b. Time zone during Period/ Month closing
Much appreciated for your response/s.
Mahesh

Hi, Yogesh
I am sorry, I am not specifically aware of Thailand. While search in SDN, one thread was partially addressing the Thailand related need. But it is not giving much information. You may have a look at the link which I went through
Re: Country specific add ons to ECC 5.0
Regards,
Jagadeesh

BW global rollout

Dear friends,
We are going for BW global rollout and I am facing some problems because of new customizations done in R3 system like for eg : In R3 system they are changing the costcenter from may onwards and in BW the same will reflect in BW but the problem is when they want to get the report from BW for the previous period/year the cost center should reflect the new cost centers but not the old one.
Please suggest me what could be the best solution.
Thanks

Hi,
Defining Costcenter as a navigational attribute will take care of your needs. Also take a look at the links in the thread below for modelling scenarios :
Data Modelling/BW Data Architect
Cheers,
Kedar

Contacting SAP Global Support

Kind of a silly question, but has anybody evercontacted SAP Global support? I am tryimng to find out how to contact Global support. Thorugh a support callI placed earlier, I was told to contact Global support to schedule a webex session, but I can not find where or how to contact them. Could someone assist me here .. With the changes in the websites lately, I haven't figired out where everything was moved to !!!
Thanks in advance!!
Dana

From this link, you can login with your 'S' number and use the Support > Contact Support link and look for the information on your message using the message number or Call them.
https://websmp106.sap-ag.de/smb/sbo/support

Delete Global Rollout Templates

Hi there,
after creating a global rollout template (with a couple scenarios in it) we transported it to another solution manager. Due to the fact that we don't need them anymore, we also don't want these scenarios to appear in the project scope tab for new projects.
Does anybody know how to delete such templates, or at least hide them?
Thx a lot in advance
Arthur

Hi Arthur,
Where do you want to delete/hide them - in the target SolMan system, I suppose ?!
Did you try the following approach:
(1) Go to Template Tab of the project
(2) Select the Tempate row concerned
(3) Go to the toggle button below to change it from 'Public' (Green) to 'Private' (Red).
Did you try to rollback the transport ? Not sure if it'll work; I haven't had to do this so far.
Best regards,
Srini

How to use the fixed exchange rate 1009 (global rollout subsidiaries)?

Hi Experts,
I am doing currency conversion.My requirement is i need to take fixed exchange rate type of 1009.
I am handling 16 different types of currencies that to be converted into US$.
Can anyone help me out how to use the exchange rate(1009) and do the currency conversion?
Thanks in advance
Ganesh

Hi,
Look here for currency conversion:
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=currency+conversion&adv=false&sortby=cm_rnd_rankvalue
Cheers!
Amit

While creating order and in MB1C, I am getting the error "No RFC destination is defined for SAP Global Trade Services"

Hi Experts,
I am getting the above error, while saving the order, and in MB1C. I am trying it in IDES, Even ,while transferring Customer and material, i am getting the same error.I checked feeder, GTS systems logical systems, both the systems are remotely logging on, but still i am getting the issue. Please help me with your suggestions.
Thnks,
Koti

Hi Koti,
Well, something must have changed, so just follow the same steps as for the original set-up:
Define & assign Logical System
Define destination for RFC calls (SM59)
Assign destination for RFC Method Calls (BD97)
Define ALE Distribution Model (BD64)
Test with Function Module /SAPSLL/CD_ALE_RECEIVER_GET_R3
Regards,
Dave

BC Sets for Global Rollout

All-
I need some information / lessons learned on cataloging BC sets on the Configuration Tab for a Template Project. If you have used this functionality (i.e. recorded the config values, packaged them up in SOLAR02, and executed them for subsequent projects) I'd like to know.
What were the implications? Was it worth it?

Bump. Anyone?

SAP Global Rollouts

Similar Messages

Maybe you are looking for