SAP GRC 5.3 - Standard Text files for RAR - Are they complete

Dear All,
Whether the standard text file SoD rule set provided by SAP covers all the standard SAP transaction codes which are available in ECC6.0 and other systems as well.
Because we found that there are some t-codes which are not form part of Standard SoD Rule set say eg., MIGO_TR - Transfer posting, ME11, ME58 - Create PO, CKME - Release planned prices etc.,. like this there are some standard t-codes which are not part of the functions in standard rule set
We have a challenge from the client that Standard rule set provided by SAP might have covered all the standard t-codes for SoD rule set and it has to be only customized to the extent of Custom t-codes (Y & Z T-codes).
Is this correct? How frequently the text files are updated. I remember the last release of text files is along with 5.3 version and there is no change from then onwards i.e. increasing t-codes in functions or increase in risks.
Please advise.
Thanks in Advance,
Best Regards,
Srihari.K

Sri,
From SAP: u201CThe SAP ruleset will never be 100% complete as the definition of "complete" is unique for each company. SAP goal is to ensure that the rules we provide are accurate and address the major segregation of duties concerns.u201D
A clear point that reflects that, it is that you will have to do the exercise to identify, analyze and include every Z (custom) transactions used by your customer within the standard SoD Matrix that SAP provides.
SAP provides updates for the Rule Set every Quarter.
To get the latest SoD Matrix and key information regarding this topic please refer to SAP Notes:
986996
1326497
Hope it helps. Regards,
Imanol

Similar Messages

Error while uploading standard text files for the Global rule set

Hi all,
As part of Post Installation Activities we have uploaded standard text files for business process, functions, risks and rule set obtained with the installable Software.
While uploading the text files we have uploaded the Basis Functions Authorizations first and then R/3 text files.
When we checked no actions are appearing in the rule architect under respective functions except for the BASIS Module.
Is this because we have uploaded the Basis functions before the R/3 text files?If yes, how to replace the Basis with the R/3 ones.
We tried to replace the Basis function authorizations by re-uploading the R/3 text files again but we got the below error message u201CORA-00001:unique constraint (SAPSR3DB.SYS_C004479) violatedu201D
Can somebody please help in this regard how to get the standard rule set in our system?
Thanks and Best Regards,
Srihari.K

Hi Sri,
you should upload first the static text files and the authorization objects first and then the GRC standard rule set files following the instructions of the SAP Configuration Guide available in Service Market Place under http://service.sap.com/instguides .
The GRC standard rule set contains files named Basis_functions_action.txt and R3_function_action.txt. The first one contains ONLY function definitions in terms of transcation codes for basis only, whereas the second one contains functions definition for basis AND ERP modules. The same holds for the *_function_permission.txt files. There are also function definition files for other SAP solutions such as APO, CRM, HR etc.
You can open a customer message and request a deletion script for the rule sets files you have uploaded already. After their application of this script all rule set data will be deleted from your database. If you have uploaded static text and authorization files correctly, you can then upload the GRC standard rule set files as needed again.
best regards,
Frank

Is SAP capable of sending a TEXT file in different modes like DOS ?

Is SAP capable of sending a TEXT file (.txt) in different modes like DOS ?

Yes SAP is capable to send .txt file in different mode.
For this you have to maintain the setting of Code page and encoding. There so may types of encoding (UTF-8, UTF-8 without BOM, UTF-16 etc) supported by SAP. You can check them from SAP logon pad.
If you are creating the file on application server then you can also mentioned encoding statement in OPEN DATASET statements.
For more details check open dataset statement.

SoD Risk Summary and Rule Text Files for CC 5.1

Hi,
Could anyone share with me where could I find the SoD Risk Summary and Rule Text Files for CC 5.1? I have looked into SAP Marketplace but I was not able to find such information. In the installation files we downloaded, these files are not included either
Thanks in advance. Regards,
Imanol

Hi,
These rules were available on the market place for CC 40: they were included in the support package 1 or 2.
For CC 51, we had the same issue as you: we did not find the rules on the market place. Apparently, they are not.
My customer had to send a OSS message to SAP in order to receive the rules (.txt files).
Regards,
Nicolas.

Error while importing a text file for a list of values

Hi Experts,
While importing a text file for a list of values in designer, I am getting error message as below:
"Invalid setting in Excel key of the Engines section of the Windows Registry. (3433)".
I am using BO XI R3. Universe Designer version : 12.1.0.882
Any suggestion ?
Regards

plzzzzzzzzzzzzzzzzz.............sme1 help me out

Symbols do not flow into InDesign from standard text file

Within our application, we have the option to type in symbols within a text editor. Symbols include the copyright, registered, and trademark symbols. We then take the text that is typed in and merge the text to a standard text file, then place that file within InDesign CS3. At one think those symbol flowed in perfectly, but recently those symbols do not flow into InDesign on their own. What could be causing this problem.
Any body have any thoughts?
Thanks,
Brian

You can get these three (serif) characters in Symbol with
<0xF6D9><0xF6DA><0xF6DB>. Your three characters come in pink (which
means they don't exist in the font). It could be that they used to work
because you had a different Symbol font loaded. I always seem to have at
least three Symbol fonts (T1, TT, OT) going, even though I try to only
have one.
But why bother with the font change? These characters are ANSI: © ALT
0169, ® ALT 0174, ALT 0153. You should be able to see them in your
text editor and in just about every decent text font.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

How to prepare the Format of Flat file(Excel or Text file) for sales order

Hi All,
My requirement is to prepare the Flat File formats(Excel or Text file) for sales order Conversion using BAPI by COB.
Needed Sample Excel or Text flat file .
Thanks for all.
Regards,
Chowdary
Moderator message : Search for available information. Thread locked.
Your similiar question [Flat files formats|Flat files formats] has been already locked for similiar reason. Read forum rules before posting.
Edited by: Vinod Kumar on Jul 8, 2011 9:36 AM

Hi,
You can use something like this:
switch(cell.getCellType()) {
case Cell.CELL_TYPE_STRING:
    System.out.println(cell.getRichStringCellValue().getString());
    break;
case Cell.CELL_TYPE_NUMERIC:
    if(DateUtil.isCellDateFormatted(cell)) {
      System.out.println(cell.getDateCellValue());
    else {
      System.out.println(cell.getNumericCellValue());
    break;
    case Cell.CELL_TYPE_BOOLEAN:
      System.out.println(cell.getBooleanCellValue());
      break;
    case Cell.CELL_TYPE_FORMULA:
      System.out.println(cell.getCellFormula());
      break;
    default:
      System.out.println();
Hope it helps,
Daniel

Error - Server file should not be empty- while uploading Text files in RAR

Hi,
We are uploading SU24 text files but we are getting the error "Server file should not be empty" while uploading the Description files in RAR 5.3
We followed the same naming covention and also used UTF-8 format for the text files. We placed the file in our Desktop as well and tried uploading into RAR - but still the same error is being thrown?
Are we missing something here?
Thanks and Best Regards,
Srihari.K

Hi and thanks to the answers so far.
I forgot to mention some points :
- I'm using forground import
- we are trying to use RAR to run risk analysis on non-sap systems as well as SAP (single or cross-systems).
So the file I'm trying to upload does not come from a SAP backen, but was created from scratch.
However the data in the files are coherent (and I compared with a SAP extraction, the format is the same)
here is a sample of the file I try to upload : (an that is actually what I'm trying to import as a test file)
sap_auth.txt:
OEITIAC     GTIAC     SEL     1
OEITIAC     GTIAC     MOD     1
OEITIAC     GTIAC     INS     1
OEITIAC     GTIAC     SUP     1
each element (ACT/PRM/FLD/VAL) is defined in the sap_desc.txt file that I loaded first (without error).
note that each column is separated by a single TAB (with an empty column at the end of each line).
each line is terminated by a CR/LF
I tried UTF-8 with and W/O BOM
Regards,

How to change standard PCA hierarchy for Controlling Area?

Dear all,
I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
=====================================
Standard hierarchy CIS for COAr 0700 already contains profit center(s)
Message no. KM160
Diagnosis
You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
=====================================
How can I change it?

I will clarify the business requirements behind this request.
We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Narahari,
Yes, we have tables for SAP BPC EPM comments and it is stored in backend BW.
Please follow the below steps to see it -
1. Go to RSA1 and find the infoprovider name for the application/cube that contains the comments For example, the infoprovider name is /CPMB/VZIKG4O
2. Then Go to SE16 and enter the comment table name. The comment tables are generated tables. You can determine there name by using the following rules:
a. The table name always starts with '/1CPMB/'
b. The rest of the name is derived from the infoprovider name - it is the first two characters after the second '/' + the fourth, fifth and sixth characters + CMT (for comments) or CMTA (for archived comments). In my case the comments table name would be "/1CPMB/VZKG4CMT" and the archived comments table would be "/1CPMB/VZKG4CMTA".
3. Hit 'F7' or click the table contents button.
4. Enter the criteria for the comments you wish to export.
Hope this helps.

No Authorization To Upload Text file for a Variable

Hi Experts,
I am trying to upload a text file from Multiple Selection screen of a Query in Business Explorer and it gives the error message of 'No Upload Authorization'
An additional Information: I could able to Upload the text file when we were in SP17. Its recently upgraded to SP 21. Does this Upgradation of service pack has any Impact on this??
An idea about this error, PLEASE ?
Many Thanks in Advance.
Cheers,
Krishna

Hi Panagiotis,
Have a look into the Portal Desktop link below.
http://help.sap.com/saphelp_nw70/helpdata/EN/ac/dc4f3eeb684212e10000000a11405a/frameset.htm
Somewhere mid section, you will find Portal Favourites (http://help.sap.com/saphelp_nw70/helpdata/EN/3a/d609e5803111d5992f00508b6b8b11/frameset.htm).
Make sure that Knowledge Management is installed on your system and that you have activated the Add to Portal Favorites property (this entry is displayed in the options menu of your page title bar).
http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/a30a48887d4cb690b4f1754f651ba1/frameset.htm
If all above if set, then checkout the needed activities within the Portal Favourite iview setting.
http://help.sap.com/saphelp_nw70/helpdata/EN/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
Checkout on both the page title bar Options menu and the context menu of the Detailed Navigation iView display an Add to Portal Favorites item, allowing users to store links to favorites (thats where I believe your missing permission).
The Portal Favorites iView is part of the Knowledge Management installation and is integrated into the portal. Thus if the above steps are done and the settings activated, then your standard user should not see error in the Portal Favourites with the role that you have already assigned to the user.
Also look into Standard User (eu_role), which basic functionality (portal personalization iViews) for the core portal platform and default content for the Knowledge Management and Collaboration capabilities of SAP NetWeaver. By default, the Everyone group in the portal is assigned to this role.
http://help.sap.com/saphelp_nw70/helpdata/EN/47/f0f7415e639c39e10000000a155106/frameset.htm
Hope that helps.
Ray

Standard text entry for Service line items using BDC

Hi,
I want to enter standard texts for service line items of RFQ created using BDC, if it is a line item i can pass RFQ_number+line_item number as TDNAME in SAVE_TEXT function module, but for Service line item what value we need to pass in TDNAME.
Is there anyway we can capture the package number in BDC of ME41?
Regards
Bala Krishna

.

Extracting number from text files for variable

Hello again,
I have several different types of text files all with the line
# NPTS=32768 DT=0.005
somewhere in the file. The numerical values are different for each file and I need to pull them out to assign as a variable for a program I am running.
How can I search a file and pull out each of these two numbers?
Thank you

Procyon's sed script assumes that the NPTS number and the DT number will both always have a period in them. In the original, the NPTS number doesn't have a period, and I don't know whether the DT number may lack a period.
You could try this instead (replacing the 's~....~p' part of Procyon's script):
's~# NPTS=\([0-9.]*\) *DT=\([0-9.]*\)~\1,\2~p'
That may let in stuff you want to exclude, for instance, it would let in:
NPTS=0.0.0.0.0 DT=1.1.1.1.1
and:
NPTS=....... DT=
and so on. But it's a tradeoff: if you know your data doesn't include anything like that, you can go with a simpler sed script. If you need to be fussier about what you're matching, then your sed script will need to be more complex.
EDIT: What I said in first paragraph is wrong. I overlooked the '*' after the '\.' in Procyon's script. What he's got will permit but not require a period. My final point still applies, though, to both of our suggestions. His script and my script would both match the second of my bad cases.
Last edited by Profjim (2008-09-17 21:31:34)

Pre-tagging text files for FrameMaker 11

In older versions of FrameMaker I used to be able to pre-tag a text/data file using @tag name=[paratext] at the beginning of a paragraph so that when the file was imported to a FrameMaker template, the specified tag would be applied automatically and I didn't have to apply the tags manually. This doesn't seem to work any more, but I can't believe this feature is no longer available. How do I do the same thing for FrameMaker 11 please?

The include statement at the top of an MML file is optional, but handy if you do a lot of MML work and always use the same styles. For occasional work or document with a "novelty" style-set, it's enough to put a <!DefineTag> slug at the top of the MML source for each style. Just remember to start the file with <MML> – the FM import scrutinises the file rather than relying on the extension – and to save it as ANSII. Oh, and I've noticed/learnt that if you don't leave a blank line between each tagged paragraph in the input, FM adds a space at the end of the paragraph. (showing my age – I've been sternly warned against increasing file-size with this sort of thing)
I use MML a lot, for cleaning up – erm – enthusiastically formatted or completely unformatted .doc files, and apart from missing support for tables I find it a valuable blade on my FM Swiss Army knife <g> Minimal work with a text editor can convert an MML file into tagged text suitable for InDesign. Haven't had the occasion to experiment with IDD to MML, but who knows … that might work too.
Just for completeness, a small example:
<MML>
<!DefineTag :h2>
<!DefineTag :p>
<!DefineTag :ul>
<!DefineTag :ul_2>
<:h2>System requirements – disk space
<:p>A minimum of 1Gb free disk space is recommended.
<:ul>around 250 MB for Java
<:ul>around 12 MB for a fresh Tomcat Server installation
<:ul>around 23 MB for KEY LOADING SERVER files
<:ul>additional space for
<:ul_2>Tomcat Server working files
<:ul_2>KEY LOADING reports
<:ul_2>log files (space depends on the trace level and clean up policies adopted)

Want to save text file for quarterly challan

Hello,
I have saved my quarterly challan through PC00_M40_CMAP, now i am trying to retrive file in text file, so tell me how to retrive file, where it exactly saved.

Hello,
After doing the mapping you need to run PC00_M40_F24Q , there you will get the option for downloading.
Best Regards,
Deepak.

SAP GRC 5.3 - Standard Text files for RAR - Are they complete

Similar Messages

Maybe you are looking for