SAP GRC AC with SAP IdM and without SAP Idm

Hello,
Could anyone provide me what are the advantages implementing SAP IdM with SAP AC suite?
Can I use SAP GRC User Provisioning tool with SAP HCM position based concept?
Thanks in advance.
-Harry

Hi ,
In GRC 10 there is no concept of web services . GRC 10 uses native SQL query for calling risk analysis which mean no need to configure web service in GRC 10
Thanks & Regards
Asheesh

Similar Messages

  • SAP GRC for Enterprise Architecture - Synergies and Gaps

    Hi to all the Experts out there , I am a Freshie, Just Certified in TERP10 (Business Process Integration(, am doing Masters at Brunel University and the Dissertation topic I am working on is "SAP GRC for Enterprise Architecture - Synergies and Gaps ", and it involves unbiased exploration of SAP Solution for Governance Risk and Compliance for Enterprise Architecture, I request you all to contribute any related Information and or documentation for "SAP GRC" which can help me establish synergies for an Enterprise Architects perspective and gaps if any found.

    Hi
    You can find the basic documentation and whitepapers on GRC @
    http://www.sap.com/solutions/sapbusinessobjects/large/governance-risk-compliance/index.epx
    Which may help you in your study.
    Regards
    Swarna

  • Material cost estimate with quantity structure and without quantity structu

    What is the difference between material cost estiame with quantity strucutre and without quantiry structure?

    For the quantity structure pl read the following link
    http://help.sap.com/erp2005_ehp_02/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
    For without quantity stucture
    http://help.sap.com/erp2005_ehp_02/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm

  • Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal?

    Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution

    Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
    Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
    http://www.apple.com/batteries/iphone.html

  • Is it possible to integrate LSO 600 with an external system without SAP PI?

    Hi,
    as asked in the title, i am wondering if it is possible to integrate LSO 600 with an external (non-SAP) system without using SAP PI/XI. The external system is a middleware application which can handle RFC functions, IDocs besides the usual web service communications.
    However, i don't know how LSO and SAP PI are integrated so i wonder if their interfaces are such that instead of SAP PI another middleware could be used.

    Web Services are used. If you were to implement the services in your 3rd party middleware and configure SAP to call it, I suppose it is possible. The external course catalog can be used for CourseEnrollment and LearningProgress. See the application help for details. Don't expect to receive support from SAP with such a setup however.

  • SAP GRC integration with Oracle IDAM.

    We are looking to implement SAP-ISU and have a proposal to implement a SAP solution which integrates Oracle IDAM (for user provisioning) and SAP GRC. Does anyone have experience of pros/cons, possible pitfalls of this integration.
    In addition, there is some debate over whether GRC is actually an unnecessary duplication in this circumstance, as there is a view that Oracle IDAM has the ability to deal with all the role management that GRC will be doing. Would appreciate any views?

    Hi Alessandro,
    thank you very much for your responce. But as per oracle integration docuemnt we are using stadard SAP web services for this integration peice.
    GRAC_LOOKUP_WS for Lookup
    GRAC_RISK_ANALYSIS_WOUT_NO_WS for Risk analysis with out Request.
    Please suggest..

  • Dependencies between the SAP R/3 Plug-In (PI) and the SAP Basis Plug-In (PI

    Hi All,
    SAP declare:
    "SAP R/3 Plug-In Support Package 10 for SAP R/3 Plug-In 2004.1 (scheduled for delivery in November 2005) will require SAP Basis Plug-In 2005.1"
    I have an R/3 4.6c with PI 2004.1 and a BW 3.0B with PI_BASIS 2003.1.
    <b>Why using a mistake combination I work right?
    Are there some restriction using this combination?</b>
    Regards
    Davide Ivanov
    [email protected]

    Within SAP R/3 Enterprise, the SAP Basis Plug-In is a prerequisite for the SAP R/3 Plug-In, and both components always have to have the same release level, e.g. PI 2004_1 and PI_Basis 2004_1. When planning an upgrade for the SAP R/3 Plug-In within SAP R/3 Enterprise, you have to upgrade the SAP Basis Plug-In as well. As of SAP Basis Plug-In 2005.1, the releases will no longer need to correspond. However, the SAP R/3 Plug-In Support Package for  PI 2004.1, which contains new interfaces, will still require a specific SAP Basis Plug-In. SAP R/3 Plug-In Support Package 10 for SAP R/3 Plug-In 2004.1 requires SAP Basis Plug-In 2005.1. ...
    REFERENCE FROM SERVICE.SAP.COM
    ASSIGN POINTS IF IT HELPS

  • Purchase Requisition with mat-nr and without mat-nr

    Hi,
    if I create a Purchase Requisition with a material number it will be transfered into the EPRTRANS,
    but if I create a Purchase Requisition without a materialnumber (only with account assignment)
    then it will be not transfered into EPRTRANS .
    Do you have an idea why this strange behaivour happens.
    Maybe there must be made some changes in Function Module BBP_EPRTRANS_MAINTAIN ?
    Regards
    ilhan

    in order to perform a Purchase Requisition-Upload from R/3 Backend system into another system there
    are several steps necessary.
    When I am creating a Purchase Requisition at the Backend regarding a valid material-number,
    the Purchase Requisition will be automatically inserted into the table EPRTRANS.
    But not in case of if you create a Purchase Requisition without a Material-Numnber.
    e.g. Purchase Requisition with free text and account assignment.
    Function Module BBP_EPRTRANS_MAINTAIN is reposible for transfering of Purchase Requisition
    into table EPRTRANS.
    I need these PR in the EPRTRANS in order to perform the report BBP_EXTREQ_TRANSFER finally.
    It trnasfers all Purchase Requisition from EPRTTANS to the external system.
    I hope it clarifys some of the confusion .
    regds
    ertas

  • SAP WAS 6.4 Sneak preview and MINI SAP on Single System?

    Is it possible to install SAP WAS 6.4 sneak preview and SAP MiniSAP on a Single System?
    thanks,
    regards,
    cg

    The WAS 6.40 CeBIT 2004 distribution is said to deliver both ABAP and J2EE stack.
    ftp://ftp.sap.com/pub/linuxlab/test_drive/
    I consider this as a Mini-WAS system.
    I have not tried it yet since my CD's have not arrived yet.

  • Route with weight group and without weight group

    Hello All
    I have created two  same routes  as per user requirement one with weight group and other is without weight group.once the delvery is created the route is picked up.But how do i know whether this route is with weight group or without weight group.
    Could you please clarify so that i can proceed for testing.
    Regards
    T.Srikanth

    Dear Srikanth,
    Try this
    Go to SE16 enter LIKP table then execute here you enter your delivery number then go to menu>Settings>Format list-->Clik on Choose fields here you deselect all the fields you select
    VBELN  - Delivery
    GRULG - Weight group
    PERFK - Route then execute now you can get the details about the delivery number , weight group and Route.
    If system displays only Delivery and Route you can understand there is no involvement of weight group in the route determination.
    If the system displays Delivery,weight group and route then you can understand that thre is weight group involvement in the route determination.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Nov 5, 2008 6:51 AM

  • Support for Desktop Sharing with Jabber Windows and without CSF

    Hi,
    is there a official Cisco say, that Desktop Sharing with Jabber is only supported with the Desktop Softphone mode (CSF-Device)?
    Somebody has a link? Or is it supported with the normal deskphone? Which version of jabber and CUP&IM?

    Hi
    I can confirm that Cisco Jabber 10.5 supports desktop sharing with both CSF and Desktop mode. It also supports Conference desktop sharing, and desktop sharing through regular chat (No active call)
    We are running CUCM 9.1 and IM/Presence 9.1, so  our platform is not the newest.  
    You will need the new media driver as well, Cisco Media Services Interface 4.1.2.8049. 
    Here is a link to Cisco's release document for 10.5
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/10_5/rn/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5_chapter_00.html

  • 3 sap(integrate legacy with XI - Inbound and outbound proxy

    We are planning to  have 3 sap (SRM,BI  and CRM) systems  to integrate with legacy systems . All the systems have inbound  as well as outbound proxy calls. I have few questions:
    1.What are the different steps to be configured to make this scenario work  with one XI instance .
    Does any one have this kind of scenario.
    I know we can do it without proxy calls .
    Awarded for appropriate solution.
    Thanks,
    Satya.

    ECC < -
    >
    SRM     <-->      XI    <--
    >     Legacy
                            --        >
    BI <-
    This is my scenario. The communication with all SAP Systems  using proxy . Where do u specify in the Inbound that it should go to the Respective system. At SXMBP_ADM level or configuration level in (IR&ID) . Can u please send me the exact details ?
    Let me know if you have this kind of scenario?
    Thanks,
    Satya.

  • SAP SRM Prod with Oracle DB and AIX 5.3 Performance Issue.

    Hi Basis Gurus,
    Today my SAP PRD system all of a sudden was running slow and users had difficulties executing TCodes as it took minutes before the screen appeared.My system is SAP SRM 4.00, Oracle Release 11.2.0.1.0 and AIX 5.3.
    From Basis point of view , we noticed that all the work process were hanged due to RFCs' occupying it.Couldnt investigate further on the system as we needed to restart asap because users needed to log on. A quick check on SICK shows no errors.What we managed to find out is that we needed to check this parameter below and set it accordingly:-
    rdisp/rfc_min_wait_dia_wp:-
    Definition
    Number of work processes kept free for other users.
    Use
    This parameter is used to reserve a number of dialog work processes for dialog mode. It prevents parallel RFCs from occupying all the processes.
    The parameter rdisp/wp_no_dia specifies the absolute number of dialog work processes.                               
    Unit: number of dialog work processes
    Default value: 1
    Example
    If 10 dialog work processes are configured for the instance (rdisp/wp_no_dia = 10) and the parameter rdisp/rfc_min_wait_dia_wp  = 3 is set, parallel RFCs can occupy a maximun of 7 dialog work processes. Three dialog work processes always remain free for dialog mode.
    There are 20 DIA processes in our system, perhaps reserving a minimum of about 5 work processes for DIA users will be useful via the parameter.
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    When we went for a restart of the system we encountered another issue. Steps to the issue are as below:-
    1) Did a proper shutdown of Oracle and SAP.
    2) When we start using startsap script, it doesn't start DB so we started DB manually but listener was having problem
        so we stopped all.
    3) We also did a cleanipc, it too throws below error:-
    sidadm> cleanipc <systemno> remove
                   exec(): 0509-036 Cannot load program cleanipc because of the following errors:
                   0509-130 Symbol resolution failed for cleanipc because:
                   0509-136   Symbol memmove (number 106) is not exported from
                   dependent module /usr/sap/sid/SYS/exe/run/libsapu16.so.
                   0509-192 Examine .loader section symbols with the
                   'dump -Tv' command.
    4) Also the Listener file has no contents,it's null file.
    5) This is another error :-
        exec(): 0509-036 Cannot load program /oracle/sid/112_64/bin/tnslsnr because of the following errors:
        0509-150   Dependent module /oracle/sid/112_64/lib/libttsh11.so could not be loaded.
        0509-101   The module has too many section headers
        or the file is damaged
    The libttsh11.so file was empty dated 25th timestamp as below in PRD:-
    -rw-rr    1 sid   dba               0 Nov 25 07:12 libttsh11.so
    Further checking has let me to understand this is an Oracle Bug from this link:-
    http://gavinsoorma.com/2009/12/11-1-0-6-clusterware-upgrade-to-11-1-0-7/
    This Oracle bug only happens in an Upgrade time and how could this happen to my Production system during a restart process.
    Also this system was restarted during the last weekend's maintainance window and it came up with no issues.
    6) We copied over the libttsh11.so from our QA environment to PRD and did a Startup:-
    -rwxr-x---    1 sid   dba        65967496 Nov 25 07:40 libttsh11.so (This is the copied over file from QA)
    7) After Startup everything has been in order till now.
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before. Hope all the Gurus here could shed some light into my 2 questions as I am looking for positive answers.
    Thank you.
    Regards,
    John

    Hi,
    Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version  for SAP solutions. Many of your problem will get resolved with it.
    Question 1:
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
    Generate EarlyWatch report for more detailed view
    Question 2:
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
    The libttsh11.so library cannot be found in the related directory.
    Cause
    The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
    Such a configuration will cause, installation, relinking and other unexpected problems.
    Solution
    Disable the CIO option on the filesystem.
    References
    NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
    Hope this helps.
    Regards,
    Deepak Kori

  • 2 Different SAP systems one with only WM and other no WM system

    Hi All,
      We are having trouble to implement 2 different SAP systems. In one SAP system only MM & IM will be there. The other SAP system only WM system will be there.
                In the SAP system with only MM / IM system all the materials will be valuated where as the SAP system with only WM system, there won't be any valuations. It just serves as a 3PL warehouse for the first SAP system which has only IM environment.  Both are acting as a different companies.
    We planned to interface all the PO, Inbound Deliveries and also the Sales order and deliveries to WM SAP system and develop a custom program to do PGR / PGI in WM system and then transmit the PGR / PGI details to the SAP system (which has only MM / IM environment). The WM system also uses the RF guns. But not so sure whether this can help.
    Can you please help me how to configure the WM system. I will be very grateful for your help.
    Regards,
    Vansh

    Hello,
    there is a standard SAP solution: [Decentralized Warehouse Management (LE-IDW) |http://help.sap.com/saphelp_erp60_sp/helpdata/en/51/803c35975f0054e10000009b38f839/content.htm]
    for your scenario.
    Andrzej

  • Using my macbook alternately with cinema display and without makes all my screens shift and change in size ?!

    After I disconnect from the cinema display and than a few minutes later open up the macbook without the display connected, things are fine. But re-connecting to the display, all the screens are moved and/or changed in size. Anybody any ideas ?

    I'm currently sitting in my office using my MBP and looking at a 24" Samsung display. At home I replaced my 4 year old iMac with a 2 year old 13" MBP which is connected to a similar display. That should be tell you all you need to know! 

Maybe you are looking for