SAP Groupware Connector for Novell GroupWise

Hi all,
I have a task that "investigate SAP CRM and Novell GroupWise integration". I wanna ask you that:
Can SAP CRM synchronizes with groupwise?
do we have a SAP Groupware Connector for Novell GroupWise?
Regards,
Chuong Hoang

Hi,
sorry for my slowly respond.
according to information shared from help.sap.com. I know that:
"SAP provides two SAP Groupware Connectors, one for MS Exchange Server and the other for Lotus Domino Server."
"The SAP Groupware connector consists of:
      _ SAP Groupware connector.
      _ SAP Groupware connector proxy."
in case that I need a connection between SAP CRM and Novell GroupWise, what will I can do???
     1. Do I need to develop my own SAP Groupware connector, which consists of 2 listed things above?
     2. Is it possible to do that?
Please help me answer these questions.
Regards,
Chuong Hoang

Similar Messages

SAP CRM Groupware Connector for Exchange on 64 Bit platform

Hi All,
We have successfully installed SAP CRM 5.0 on Windows 2003 x64 Server R2 SP2.
OS, Database and SAP Kernel are all 64 Bit enabled.
Now we are trying to install SAP CRM Groupware Connector on the same server.
But we encounter problems with SAP Groupware Connector 2.1 for MS Exchange installer (setup.exe), which stops with the following error:
Required Software missing:
- MS SOAP Toolkit
Installation cannot be continued !
But SOAP Toolkit 3.0 definitely is installed.
Obviously the Groupware Connector is still 32 Bit.
It is the only available download in SAP Marketplace i could find.
The CD is located in the same area where the CRM installation CDs can be downloaded.
SAP does not differ between 32 Bit and 64 Bit versions.
I'm wondering if it is possible, to run a 32 Bit Groupware Connector in a 64 Bit environment.
Does anybody have experience with such a configuration ?
Or is there a 64 Bit enabled version available for download ? Where can i find this version ?
Thank you in advance.

I got an answer from SAP Support:
SAP still recommends to use 32-bit system OS in order to avoid any future confusions.
So we have to install another 32 Bit Server only for the Groupware Connector.
Thx for your interest.

SAP Groupware Connector 5.0 Installation - Connect MS Exchange 2010

I try to install the SAP Groupware Connector 5.0 to connect a MS Exchange 2010 Server.
My host computer has an MS Windows Server 2008 operation system.
After starting the setup.exe and fill in the entries Exchange Server, Mailbox, User, Domain, Password I Get an error message:
"Validation of connection to Exchange Server failed"
"CDO library is not available."
"[0x80040154] Class not registered"
I am the opinion that I don't need a CDO, because I am useing a MS Exchange 2010 Server ....
Can somebody help me?!
Thanks

Hi Chrisitan,
Perhpas I wan'st clear in my previous reply. You cannot connect Groupware connector 5.0 to MS Exchange 2010 Server.
I've just checked, and found that exchange 2007 is now supported, but not 2010.Further information is available from the following link:
[http://help.sap.com/saphelp_crm70/helpdata/en/44/559f3699d908fae10000000a422035/frameset.htm]
Sorry I can't give a different answer....
Brian.

SAP DMS CONNECTOR FOR KM

Hi,
We have deployed "Business Package for DMS Connector for KM (BP DMS CONNECTOR KM 1.0 )" on EP environment.
The following business Package applied on EP.
BP for DMS Connector KM 1.0 (BPDMSCONN00_0-20000787.sca)
We are getting the Role "pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase"
on the EP. We have added this Document Manager Role to the user and getting the "Document Explorer" tab/Workset on the EP header.
But we are getting the following error on clicking on this workset
"Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer
Component Name : com.sap.km.cm.navigation
com/sapportals/wcm/util/pcr/PortalComponentRequestCache.
Exception id: 04:58_12/07/07_0008_11485350
See the details for the exception ID in the log file"
Do we have to Install the following SAP DMS Connector apart from the Business Package already Installed?
Navigation: Installations and Upgrades
Installations and Upgrades> Supplementary Components for Cross Industry Solutions> Life-Cycle Data Management> SAP DMS CONNECTOR FOR KM> SAP DMS CONNECTOR FOR KM 60.1
The File details are as follows
SAP DMS CONNECTOR FOR KM 60.1.1 (com.sap.pct.plm.dms.dms_km_connector.epa, DMSRepositoryConnector.par and ReadMe_Notes_785193_824325.txt)
Pls let me know how we can get DMS iViews on EP ?
Pls guide me on this.
Thanks and warm regards
Purnendu

When using the DMS Connector with EP7 please see to implament Note 1143726 - DMS-KM Connector Repository fails to start

Exchange groupware connector cannot read public folder

Hi,
we're installing the Groupware Connector for Exchange (2003) on a Win2003 SP1 server. The installation is simple, but when starting the service, the following error occurs:
[26/Apr/2006:11:33:52 +0200] WARNING - - - - - "[WRN:1010] Invalid default target folder for contacts: [email protected] does not specify public folder
. Please verify 'replica.contacts.default-target' option in config.xml." Source: Common\GroupWare.cpp:199
I tried installing and starting the connector on both the exchange server and a seperate server, but in both a cases the message appears.
The public folder exists (called "contacts"), has an email address: [email protected] and we can sent emails to it and they arrive in the contacts folder. As far as I know we executed all the steps in the installation guide (permissions etc) but for some reason the connector cannot see the public folder.
Any ideas?
I've read the two notes: 908577 and 908571
Much obliged
Marcel Rabe

Hi,
Once again very sorry for such a delayed reponse ... i don't know how did i missed your response ... anyway
You can find version of Connector 2.1.053 after you install it on a system and right click on the connectorsvc.exe and go to the version tab, find the version of the GWC.
What ever versions you have mentioned i.e., 2.1.036 and 2.1.037 are versions of Install package of GWC (which is a common for both exchange gwc and lotus gwc ).
If you still have some problems with it then revert back to me via e-mail so that i won't miss your response.
regards,
Gokul
[email protected]

Groupware connector installation

Hi ,
I need to install the groupware connector for the CRM system. I would like to confirm wether we need to install the groupware connector in the host where CRM is running or in the exchange server ?
Did anyone installed this already ? please suggest me.
Thanks
Raj

Hi Manoj,
I have gone through the help documents and for installing i am following the documents which is menitoned in the thread
CRM 2007 groupware integration
As per my understanding the groupware connector should install in Exchange server ( acts as groupware server) and we need to configure the conenction to CRM server through http protocol.
Please correct me if i am wrong.
Whose responsibilty to do the customizing configuration for groupware adapter in the CRM system ? CRM consultant or BASIS consultant. Please suggest me .
Thanks
Raj

What port is used by Groupware connector to communicate with SAP CRM?

Hi!
I've been trying to find what port is used by groupware connector when it is communicating with SAP CRM, but all I've found is that is uses SOAP over HTTP.
Our security team only wants to open the relevant port and I haven't found the port....
Does anybody know what port is used?
Thanks!
rollo

What gives you an impression that a seperate program is called to write file at OS level.....it could be the program running behind the F110.....try checking the same...and look for GUI_DOWNLOAD in the program.

Why the groupware connector need Read/Write access for all mailboxes?

Hi,
Does anybody know the technical side of how the Groupware connector creates activities,tasks and contacts?
I know it's not sending them with SMTP, it's work with DCOM,
is it creates it directly in the recipient mailbox!?, and thats why it needs write access?
kind regards,
Pavel, sheynkman.

Hi,
Thanks for the information but i already red this note and the .doc files,
it still not answering WHY you need this permission? to answer this question you need to know the technical side,an answers to question like how the GW put the contacts or the activities in the user's inbox(using DCOM)?
Think about that:
If i have BP's that is not part of my organization, no way somebody will give me administrate permissions on his mailbox.
So if this is really true SAP Didn't think that through.

Groupware Connector 5.0 for Exchange server 2010

Hello All,
We are looking for some documentation on CRM groupware integration with Exchange server 2010.
Groupware Connector 5.0
SAP just release note 1595564 to update the groupware connector to work
with Exchange 2010. Are there updated Groupware Connector Installation
and Adminisration guides for the new Connector 5.0?
We would appreciate if someone could add more information on how we can integrate both.
Thanks in Advance!

Dear Kiran,
Check note 1642681 very help full.
regard ,
vijay.

JCO Timeout for SAP Business Connector 4.7

Environment :
Windows 2000, SAP Business Connector (BC) 4.7
General Description :
SAP BC is used to invoke BAPI's in the SAP R/3 system.
Issue :
Some BAPI's are taking some time to return response depending on user load. Need to provide a timeout for RFC calls invoked by SAP BC using JCO.
Following is the entry in the rfc trace log file when BC starts up ...
000000 -
2005-05-12 11:07:20 EDT
000001 [B2B-SAP.0011.0001] [JNI-LAYER] RFC.nativeSetTraceLevel()                with rc = RFC_OK   leave, [SUCCESS]
000002 [B2B-SAP.0002.0022] Log level set to 10
000003 [B2B-SAP.0002.0025] Registered SAP package trace with core trace
000004 [B2B-SAP.0002.0014] Starting SAP services
000005 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.setProperty(jco.jdsr.comp_name, SAP BC server0023 5555)
000006 [B2B-SAP.0003.0001] Loading native libraries
000007 [B2B-SAP.0003.0002] JCO version: 2.1.4 (2004-10-20) sapjcorfc 2.1.4 (2004-10-20)
000008 [B2B-SAP.0003.0004] jRFCLibrary info: 2.1.4 (2004-10-20)(C:\sapbc47\Server\packages\SAP\code\libs\sapjcorfc.dll)
000009 [B2B-SAP.0003.0003] RfcLibrary version:
This RFC library belongs to the SAP R/3 Release *** 640,0,41 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
00000A [B2B-SAP.0011.0001] MiddlewareRFC.setProperty(jco.middleware.wait_for_request_time, 1)
00000B [B2B-SAP.0002.0016] Loaded SAP server configurations
00000C [B2B-SAP.0002.0015] SAP services started
00000D [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
00000E [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setTrace(true), current state false
00000F [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
000010 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setMaxWaitTime(30000)
000011 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setConnectionTimeout(600000)
000012 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setTimeoutCheckPeriod(30000) on pool SERVER-300&USER_RFC&300&EN
000013 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.PoolManager.addPool:
      name = SERVER-300&USER_RFC&300&EN,
      connection = USER_RFC|300|EN|AS=[11.12.7.296|00|]G0|,
      pool_size = 10,
      max_wait_time = 30000,
      pooled_connection_timeout = 600000,
      timeout_check_period = 30000
000014 [B2B-SAP.0005.0003] Pool changed: SERVER-300&USER_RFC&300&EN containing 0 connection(s)
007E72 [B2B-SAP.0006.0001] Executing invoke for ZBAPI_TEST_Service on SERVER-300
007E73 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.execute (ZBAPI_TEST_Service) on handle [2]
Questions :
   1) Is there a SAP BC configuration parameter for RFC execution timeout ??
   2) Any other way of enforcing the RFC time out ??
   3) If there is a way to set timeout on JCO.Client.execute method ??
I really appreciate your help !!

I have tried changes the connection timeout value but if doesnot affect the time RFC. Following is from SAP BC adapter guide ..
Delay (minutes) until an unused connection to a SAP
System is timed out (default: 5)
I think I need similar setting as that for RFC connection !!

LDAP connector for Customer masters With SAP..........

Hi Experts ,
Our requirement is we have certain applications which are integrated
with SAP Portal.
For these applications Data sources are maintained in two different
LDAPS.
One LDAP (enterprise directory) is for USER data and the other LDAP for
Customer data(in this senario customer data is nothing but business
partner role oragnization).
MY task is to build an interface for Customer data with LDAP sync.
So here the question is, Can we use SAP standard LDAP connectors to
make connectivity to the enterprise directory(LDAP)and push business
partners data from CRM to the enterprise directory.
In Standard SAP system which are standard LDAP connectors support
this functionality?
Please advice me and also let me know if we have any SAP notes for this
senario.
Best Regards
Prasad

Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
In the wiki you can find
You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
But that path does not exist in SAP download software page.
Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
Could you please provide some more information on the topic?
Thanks a lot.
Neil

Creating a WEB Service for SAP enterprise connector

Hi,
I am using the SAP enterprise connector plugin for Netweaver 04.
It generated me all the classes that I need for the BAPI.
It also generated me a Proxy class.
I want to create a service.
This is what I've done :
1) create a portal service.
2) create a methode in the service :
public Bapi_Companycode_Getdetail_Output execute_BAPI_COMPANYCODE_GETDETAIL(
Bapi_Companycode_Getdetail_Input arg1)
try {
return new MyProxy_PortType().bapi_Companycode_Getdetail (arg1);
} catch (Exception e) {
return null;
3) after I created a web service from the portal service.
Is it the right way ?
Thanks a lot.

Hi Marcin and everyone,
Thanks for the precious explanations.
I created a client and I have an exception.
1) I made a portal service from wsdl - client side.
2) I created a DynPage.
3) Here is the code :
IMyBAPI4Service client = (IMyBAPI4Service) PortalRuntime.getRuntimeResources().getService(
IMyBAPI4Service.KEY);
IMyBAPI4Service securedClient = (IMyBAPI4Service) client.getSecurisedServiceConnection(                 request.getUser());
//this is null.
if (securedClient.getURLEndPoint().getURL() == null) {
securedClient.setURLEndPoint(new URLEndpoint("http://<server>:<port>/irj/servlet/prt/soap/com.sap.portal.prt.soap.MyBAPI4Service?style=doc_lit"));
Bapi_Companycode_Getdetail_Input importParams =     new Bapi_Companycode_Getdetail_Input();
importParams.setCompanycodeid("0500");
Bapi_Companycode_Getdetail_Output exportParams = null;
securedClient.execute_BAPI_COMPANYCODE_GETDETAIL(importParams);
Do I have to use a secured client ? What is it ?
The exception is :
Problem at execution: SOAP Fault Error (java.lang.NoClassDefFoundError) : java.lang.NoClassDefFoundError
Thanks Marcin....
Message was edited by: David Fryda

Any supports for SAP Business connector

Hello!
Has anyone knowledge in following areas:
- Has the SAP Business connector still any supports?
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
- Which support package stack and which kernel version are mandatory for Source Release 4.6c?
Thank you!
regards
Axel

Hi,
Fisrt of all pls don't cross post the same question(s) over different forums.
The BC is still part of NW04s:
http://help.sap.com/saphelp_nw70/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
You don't specfy what you want to do with Notes, so here are some links:
http://help.sap.com/saphelp_nw70/helpdata/en/28/b7341c0f3e7a4494227dfaa130e520/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/e0/1059d2674d9f43907169400ac6618a/frameset.htm
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
Deadline: June 15th

SAP connector for CAD Integration with Unigraphics (NX)

Hi Experts,
Could you please guide me on where can I download CAD Integration connector for Unigraphics (NX).
Thanks in advance.
Kind regards,
Neil

Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
In the wiki you can find
You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
But that path does not exist in SAP download software page.
Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
Could you please provide some more information on the topic?
Thanks a lot.
Neil

Trillium Data quality connector for SAP

hi
this is my first time in this forum, so if this is not the correct area to post this, mods please move the appropriate area.
as the subject mentions, i just want to know if anyone have any business documents regarding this data quality connector for SAP. any kind of documentation will be helpfull. thanks

Please check the newly created MDM Data Enrichment page on SDN. It provides useful information: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/60368290-4d9e-2910-1480-bb55167ee3c3. [original link is broken]
Regards,
Markus

SAP Groupware Connector for Novell GroupWise

Similar Messages

Maybe you are looking for