SAP GUI 6.40 and 7.10 differences

Hi,
Could any give me the what are the difference between SAP GUI 6.40 and 7.10. what all the features and advantages in both.
Thanks in advance
Regards
Rajeshwar

Hi,
You can start having a look to these links
/people/bv.pillai/blog/2007/02/07/sapgui-for-windows-710-core-released
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03eb03a-54f7-2a10-dca8-b4ca21364d38
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90cac823-55f7-2a10-88b6-fbf065c4c71b
best regards

Similar Messages

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

SAP GUI 7.0 and RRMX

I am using BI NW04s and using RRMX via the SAP GUI 7.0.
My problem is that BEx will not start.
SP13 is meant to fix the problem and there is a note (1018928) that details how to fix it for other SPs....however this does not seem to work.
Any ideas?
Thanks
Patrick

To solve this problem go to Analyzer 7.0 --> choose option --> global settings --> and mark the option: Launch SAP BW 3.x verion of Bex Analyzer from SAP Gui (RRMX).
And start the Analyzer 7.0 again.
Cheers,
Hassan

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

SAP GUI 720 shortcuts and history

Hi guys!
decided to upgrade install server to SAP GUI720 .
I upgrade new install server to patch level 8.
When i have patch level 0 SAP GUI after installing always create shortcut on users desktop.
after updating (patch level 8) the shortcut no longer creates.
After install hsitory file default creates in C:\
All users don't have permissions on write in partition C:\ .
Because of this SAP history is not saved.
Everybody knows how solve problem with shortcut after install and adjust the path to the *.mdb file ? When the SAP GUI is installing on the workstation, the path to the *.mdb file are written automatically.
Thanks

I try install SAP GUI with admin and users rights in both cases shortcut not installed on desktop.
OC Windows XP
In logs 14:18:36 NwSapSetup 1   Return-Code: 0
1E or 2E not see
may be a registry key that is responsible for the shortcut and it is not written correctly?
in install log, its not errors?
14:09:19 NwSapsAtlC 1        |-----SAP GUI Suite -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP GUI -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP Logon Pad -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP Logon -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Tweak-GUI -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP GUI Scripting -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---GUI XT -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Shortcut to SAPlpd -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Unicode RFC Libraries -- Dirty! --
14:09:19 NwSapsAtlC 1        |-----R/3 Add-On -- Dirty! --

New patches for SAP GUI 6.40 and the Screenreader Extension

Hi,
patch 10 for SAP GUI 6.40 and version 8 of the screenreader extension have been published on service.sap.com and ftp.sap.com.
Best regards,
Christian

Hi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian

BW 3.5 frontend with SAP GUI 6.20 and 6.40 on BI 7.0

Hi,
My question was raised after I read the BIFAQ, where it is stated:
Which BW 3.5 front-end versions can I use on top of NetWeaver BI 2004s?
You can use SAP GUI 6.20 with the latest BW 3.5 front-end patch to work with an SAP NetWeaver 2004s System (only BW 3.5 front-end functionality).
You can also use SAP GUI 6.40 Comp 4 or higher and BW 3.5 front-end ('BW Add-in') (only BW 3.5 front-end functionality).
SAP NetWeaver 2004s BI front-end is installed separately ('BI Add-in' on the installation CD).

Question:
Is the BW 3.5 frontend (with GUI 6.20) identical to the BW 3.5 frontend add-on (with GUI 6.40)?
Thxs.
LauQ

Hi,
I think they are identical, the very difference is between 3.5 tools and NW2004s tools.
regards
Michele

SAP GUI 7.10 and ICH

Hi all,
Has anyone worked on SCM 5.0 - ICH using SAP GUI 7.10?
With old version of SAP GUI, I am able to access the transactions of ICH, where as when I upgrade it t0 7.10, those transactions does not work. It says ".exe not found, use windows search to look for the file".
The Transaction code that I am trying to access is : /SCA/ICH
Path: SAP Menu --> Inventory Colloboration hub --> ICH
Best Regards
Raghu Kishore

Hi Raghu,
A patch is supplied on the service market place.
The URL of the service market place is:
http://service.sap.com/patches
The patch can be found in the GUI 7.10 directory. The patch number is >= 1.
Information on downloading and applying the patch can be found in note 96885.
For information about the expected release date of the patch please view note 578944.
Regards,
Ganesh
Please update the points if the problem is solved.

Uninstall of SAP GUI 7.2 and Patch 4

Hi,
I have installed SAPGUI 7.2 and applied patch 4..
I was able to uninstall SAP GUI 7.2 through however, the PATCH still exists in the add remove section in the control panel ... I can not see any option to uninstall all gui components completely ..
Does anyone have a way to do this ???
Thanks

Hello Fahed
the best way:
use command line on the affected client:
nwsapsetup /uninstall /all /nodlg
It is documented in the Frontend Installation Guide which is available in the
DOCU folder on your Sapgui Source Cd.
Best Regards
Sven

SAP GUI 7.20 and Animated Messages in Status Bar

Hello Experts,
Is there a way to disable "animated" display of messages in status bar when Signature Design is active? Currently messages are scrolled from left to right and then fade in. (Please note that this is a different from "Animated Focus" or "Animation" feature and only unique to Signature Design Theme). It would be nice to disable the animation so messages are immediately displayed without disabling Signature Design. I have asked this question in the past and there was basically no way to accomplish this. Is there any hope that this would be included in future patches for SAP GUI 7.20?
Thank you!
Abdul

Daniel,
Have you had any luck with this issue? We recently installed SAP GUI 7.20 patch 2 and are having similar issues. While working in t-code SWDD, "Workflow Builder", I am automatically logged out of SAP and the LOGON pad also closes out and I forced to sign back in. This is happening when I drag and drop an event into a step and enter in information that should normally prompt a warning/error message after hitting the "Enter" key.
Thanks in advance.
Edited by: Michael Kostek on Oct 7, 2010 9:11 AM

Need SAP GUI for Mac and process of how to install and configure

Hi Experts,
     I need SAP GUI for Mac. Also please explain the process of how to install, how to configure etc? Please help me.

You can download the SAP Presentation DVD that will have the SAPGUI Java version for OS X. After you install, just run the app from the Application Folder.
For config there are a few options:
1. To connect to a DI directly. After starting the app, click new and under the "Advanced" tab use the following string:
   conn=/H/(hostname)/S/(port / 3200 for instance ID 00)
2. To connect to a login group. After starting the app, open the "Preferences" / Configuration / Messageservers, you need to set a path to a file that has the message servers in the following string
(SID) :     /M/(hostname)/S/(message server port)
Then click "New" and on the first tab you can choose a system and login group.
Hope this helps.
Thank
matt

SAP GUI 7.20 and DHTML Editing Component v6.02.002

Hello There!
We have SAP GUI 7.20 installed part of our workstation build. It installs DHTML Editing Component v6.02.001.
We have some other Business applications in our environment which upgrades DHTML version on the build, i.e. v6.02.002.
Question is whether SAP GUI 7.20 work with latest version of DHTMl Editing COmponent v6.02.002? If it doesn't work with latest version then what is the impact on SAP fucntionality for not having DHTML v6.02.001 on the machine?
We have a deadlock situation in our environment now. Thank you very much for your time on this.
Thanks,
Param

Hallo Christian,
Please see note 1587566 where it states:
When uninstalling with the command line options "/uninstall /all", the event
scripts of installed packages, which are defined to run on uninstall, are now
executed.
Recommend to update your installation server to the latest nwsapsetup patches referenced in the attached note http://service.sap.com/sap/support/notes/1587566
Best Regards,
Jude

SAP Gui 7.10 and Excel 2007 view..

We are still having problems after installing patch 1 to SAP Gui 7.10. (we are using Office 2007)
Patch 1 solved problem "export to excel", but we are still having problem with Microsoft Excel View. It opens Excel "viever" with no data...
Best regards
Peter Frederiksen, Lejerbo

Hi,
I think it's best to open a msg at service.sap.com for your problem.
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?

SAP MDM DISPLAY FIELD AND UNIQUE FIELD DIFFERENCE

Hi All
I am new in MDM, can any body please help me understand...
What is the difference between display field and unique field?
Besides to consider one field to be a key in a lookup table, how should we declare that field in the table, as a display field or as an unique field?
It would be helpful if someone kindly explain this to me.
Thanks in advance.
Santanu Ghosh

Hi Santanu,
To explain you the difference in Display field and Unique filed as in MDM in a prescise manner:
Display field:
Every field you create under your main table ie Product atbel will be a displayed field in MDM data manger irrespective of you making it as display or not in Console.
It means two things
1) That this field will be visible in MDM data manger.
2) This field will be visible in Import Manager for Mapping.
But in case of lookup field you need to make the fields as dispaly or not,if you wish to see them in import manger.
If you do not make the fields in a lookup table as dsipaly then even though you can see them in MDM data manger you will not be able to see them in Import amnger as a result not be able to map them.
Unique Field:
When you make any field as unique it maens taht MDM will not allow you to add two values under this field with the same value.
Eg:You acnnot add two materials with material no 100.
Hope it helped
Kindly reward points if found useful
Thanks
Simona

SAP GUI 7.20 - sapmsg.ini and saproute.ini location

I have installed SAP GUI 7.20 and I moved the saplogon.ini to a folder different from C:\WINDWOS, but message server and SAProuter are still pointing to C:\WINDOWS\SAPMSG.INI and C:\WINDWOS\SAPROUTE.INI.
I don't like these files on WINDOWS, How can I move them to another location and SAP GUI still can read them?
Many Thanks in advance,
Fernando.

Hello Fernando,
please see note 38119.
Regards,
Martin

SAP GUI 6.40 and 7.10 differences

Similar Messages

Maybe you are looking for