SAP GUI 602 logon error

Dear Experts:
we are having SAP GUI logon problem as follow:
SAP GUI 620
partner not reached (host prd.uaes.com, service sapdp03)
time     Wed Nov 26 15:56:03 2008
componet   NI (Network interface)
Release     620
version 36
Module ninti.c
Line 881
Method    NiPConnect
Return Code -10
System Call connect
Error No 10055
Error Text WSAENOBUFS: No buffer space available
Counter 1
does anybody have idea about above error?
thank you.
regards, Mao

Hello Sergo Beradze,
yes. the SAP system in prd.uaes.com host is 32bit server. we install SAP R3 4.6c sr2 version with it.
most of time the SAP PC user can connect to SAP smoothly. but sometimes some part of sap users will get the above error message which I have posted.
regards, Mao

Similar Messages

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

SAP GUI 620 connectivity issue

Hi,
I am using SAP .NET connector 2.0.1 on windows XP machine from last 6 months. However, before a couple of days back, by machine got formatted and I had to install all the softwares again. Now when I try to connect to my SAP server using SAP GUI 620 logon pad, it says "Connection timed out". This connection gets established from various windows 2000/2003 machines but not on XP machines. Is there some special setting which needs to be done in order to use SAP GUI 620 on win XP? If not, then what could be the potential solution?

Hi,
To my understanding you have to upgrade your Microsoft Excel verion to 2007. SAP GUI may not work either for 2003 and 2010. Please ask your IT team to upgrade your Excel version to 2007.
Regards,
Vishnu.

SAP Gui Logon Error - 0942

Hi,
We done system copy from SAP ECC6 windows to unix environment.It sucessfully installed.
while we logon(SAPGUI) the Unix system Error message Occurs "SQL Error 942 When
accessing program SAPM".
Kindly advice to us.
regards
senthil

> No problem in System copy method. I login to my unix system(root user) i sucessfully started database & cI.
> by using commands lsnrctl start & startsap sap. Server works fine.My problem is SAP GUI Login only
The SAPGUI Logon problem is a symptom of the problem. The system doesn'T find a specific table it looks for. Even if the system is up and running this doesn't mean anything. You can't logon since a program can't be loaded because the table is not existing.
Check your dev_w* traces, I'm sure you find a LOT of errors.
Markus

SAP GUI logon error

HI Friends,
I installed SAP Gui in my system, I had issues and I downloaded again and installed when I tried to connect I am getting an error as " Could not initialize Context Management Library".
I tried the steps given OSS note 561557 and still getting the same issue. Then Uninstall and installed again. Still trying to fix the same issue.
Any suggestions Please
Thanks - Swarna

Hi Swarna,
Try this option.
In your system > goto > Control Panel > Double click on SAP Configuration icon > Select - User Accessibility mode.
http://forums.sdn.sap.com/thread.jspa?threadID=2137296
Br,
Venky

SAP GUI (SAP LOGON 620).Problem connecting to R/3

Hi I Installed SAP 4.7 successfully.I could see SAP R3 Management console started properly.After Installing SAP GUI,I tried to connect from SAP Logon.I get an error ,A box opens
Which has title 'Syntax Errors'
and fields in the box are,
Syntax error in program -
in include                      -
in line                           -
Last changed by           -
Author                         -
Any help on this would be greatly appreciated.I tried to google but could not find any reasonable answer.
I also tried to connect to R/3 from other box but the same result
Thanks in advance
Durga

Mantosh,
I dont see any user defined on my logon pad.All I see Proerties,Groups,Server,New,Delete.
Manas,
Still no luck.I changed as adviced by bu still I get 'Sytax Errors' window.
Here is my SAPLogon pad after the changes you suggested.
[Configuration]
SessManNewKey=4
[MSWinPos]
NormX=38
NormY=71
[Router]
Item1=
Item2=
[Router2]
Item1=
Item2=
[RouterChoice]
Item1=0
Item2=0
[Server]
Item1=10.10.10.12
Item2=SR1
[Database]
Item1=00
Item2=
[System]
Item1=3
Item2=3
[Description]
Item1=sap 4.7d
Item2=SAP 4.7E
[Address]
Item1=
Item2=
[MSSysName]
Item1=SR1
Item2=
[MSSrvName]
Item1=
Item2=
[MSSrvPort]
Item1=sapmsSR1
Item2=
[SessManKey]
Item1=3
Item2=2
[SncName]
Item1=
Item2=
[SncChoice]
Item1=0
Item2=0
[Codepage]
Item1=1100
Item2=1100
[CodepageIndex]
Item1=-1
Item2=-1
[Origin]
Item1=USEREDIT
Item2=USEREDIT
[LowSpeedConnection]
Item1=1
Item2=0

SAP Gui Logon - application server shutdown

Hi!
I'have installed SAP Netweaver 7.0 Abap TRIAL on my Windows XP Service Pack 3.
After lunching NSP-->Start Application Server, all is ok.
But when i try to Logon with Sap Gui 7.10, i get this error :
application server shutdown
Component DPTM
Release 710
Version 10
Return Code -17
Counter 1
Could you please help me?
Thanks a lot!

Hi!
MaxDB seems to start correctly :
http://www.fabiocavallo.it/sap/maxdb.jpg
...here comes dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 22 19:58:50 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c 237]
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
[dbcon.c 4726]
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 3376
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3376) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu May 22 19:58:51 2008
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06420040, size: 4205552)
M DpShMCreate: allocated sys_adm at 06420040
M DpShMCreate: allocated wp_adm at 06421A28
M DpShMCreate: allocated tm_adm_list at 064232E0
M DpShMCreate: allocated tm_adm at 06423310
M DpShMCreate: allocated wp_ca_adm at 067935A0
M DpShMCreate: allocated appc_ca_adm at 06793A50
M DpShMCreate: allocated comm_adm at 06793F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06814DB0
M DpShMCreate: allocated gw_adm at 06814DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06814E20
M DpShMCreate: allocated wall_adm at 06814E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PCFABIO
M
M Thu May 22 19:58:52 2008
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c 237]
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
[dbcon.c 4726]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PCFABIO_NSP_00 on host PCFABIO (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 22 19:58:52 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3376) [dpnttool.c 327]
Thanks again, Sergo!
Regards.
Fabio

SAP license key error: no valid license found: cannot log into SAP GUI

I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP. Well, later I tried to log in again and was locked out. After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now.
I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error. I put a trace on it and appears it cannot read license file key. I also tried to install another temp license, but that failed since no other previous valid license was found. At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how. SAP has not provided a solution yet.
I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
Has anyone else run into this issue?

Yes, I wish it were that simple, but I cannot even bring up the logon screen. SAP GUI returns a message, resource temporarily unavailable. I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found. I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well.
For NW2004s, is it even possible to install a digital license using cmd prompt?
Ben

SAP GUI and Win 7 error when attaching a document

I searched Google multiple times for an answer but didn't find one, so I'd like to bring it up in this forum.
I start by saying that mine is a large corporation with centralized application, Windows and security configuration, so I have very little manuvering as far as changing settings.
The problem we run into is as follows:
some users who use a particular (Quality Assurance) module of SAP need to regularly attach documents (typically PDF format) in SAP. The typical size of an attachment is between 3-7 MB.
Those documents are store on a network file share remote to the site. The network latency between the site and the file share location is approx. 6ms (not huge by any means). Users are running Win 7 Enterprise SP1.
Randomly, the attachment download fails in SAP and they have to exit and log back in to SAP to resume. The attachment may fail2-3 times, and then succeed or fail permanently.
Copying the file to a local drive (C:) and then attaching it in SAP always works.
The users report that this was not an issue when they were using WinXP SP3 a few months back.
Again, the problem is random in that it cannot be recreated at will but happens often enough to be more than just an inconvenience.
the Windows event log logs the following message when the attach process fails and SAP freezes:
The program saplogon.exe version 7300.1.2.1080 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: a7c
Start Time: 01cf38c9a86d55ac
Termination Time: 16
Application Path: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
Report Id: 139b5ba9-a4bd-11e3-8b65-d8d3857a05c5
I'd appreciate any input that would help resolve this issue.
Steve

Besides updating the patch level, the other thing you can try to get more information is turn on or increase the level of tracing within the SAPGUI. You can do this on the workstation in SAP Logon by clicking the little button at the upper left of the window title bar, then in the drop-down choose Options. In the new window that opens go to the Traces folder and have a look through the three different kinds of traces you can turn on. Probably you should turn on SAP Logon Traces to the "Errors" level, and same for SAP GUI Traces (to Level 1: Errors), and under Session Traces pick the options that make sense to you (perhaps "Access Control", "Office Integration", and/or "Security"? You might need to experiment with different options to get the right combination that doesn't overload the trace file with noise; you may not need a Session Trace at all if the error trace on the other two options reveal what's wrong).
You can see under Session Traces what folder the trace files will go to, and open the folder from there. By default it will be C:\Users\<username>\AppData\Local\SAP\SAP GUI\Traces.
Best regards,
Matt

SAP GUI Error - (GSS-APP DLL) on Windows Vista!

Hi All
I am getting an error when setting up SAP GUI version 710 on Windows Vista.
When I try to set up an snc logon i get the following message:
Unable to load the GSS-API DLL named 'sncgss32.dll'
On Windows XP we have a GSSAPI32.DLL in the C drive and all is ok?
Any ideas
Thanks
Phil

The following is working on Vista at a major client in DK. It is important to know wether you use a 32bit or 64bit Operating System. This example is with 32bit system.
Create a uservariable in MS Vista called SNC_LIB. Value is <drive>:\<path>\gsskrb5.dll
example: SNC_LIB=c:\windows\system32\gsskrb5.dll
the file gsskrb5.dll should ofcourse be placed in the folder specified above. You can download the file from microsoft or from SAP (I think it can be found in a note)
The you setup your SAP environment to handle SSO with the same file in the serversetup - i recommend only to use the gsskrb5.dl file. Verify that the setup is correct on the server. If it is correct the SNC tab will exist on transaction SU01 and when you enter the correct value in the "SNC name" field the should pop up a green checkmark..
In the gui on the specific system you should enter the following value in the Secure Network setting "SAPService<system id>@<domain>".
It should work without problem.. If you have an older version of SAP you should perhaps try out the GSSNTLM.DLL file instead of GSSKRB5.DLL. That can sometimes help if it does not work.
Best regards
Klaus van Berkel

Error "Please use the Latest SAP GUI version" in service admin

Hello everyone,
I have successfully installed ITS 6.20 & We are using ECC 6.0, But when I try to logon to the Admin service. I gives an error message saying "Please use the Latest SAP GUI version".Please help me solve this problem.
Regards
Subramanya

Hi,
several instances of ITS 6.20 have to be mapped either to
a) different TCP/IP ports or
b) if the same TCP/IP port should be used they have to have an individual hostname.
These settings have to be defined correctly in ItsRegistryWGATE.xml.
Please have a look at this thread for further information:
Re: How to register agates with the ADMIN instance
You could also search within this forum for the keyword "ItsRegistryWGATE.xml" or do a SAP Notes search to get more information.
Also please read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/211cc811f21a74e10000000a1553f6/frameset.htm">ITS Administrator's Guide</a>
Best regards
Henning

Error: Can't load libJPlatin.so -(JNI Library)in SAP GUI for java 7.0 -AIX

Hi,
I am getting error in SAP GUI for java 7.0 -AIX
Error: Can't load libJPlatin.so -(JNI Library)
I ran command as
./guistart /H/localhost/S/sapdbIND
I gave 777 permission to corressponding library.

It's on AIX.
I am getting error as below:
^C# ./sapgui /H/punlparidm06 /S/sapdbIND
ERROR #############################
07.03. 12:48:37.619 ERROR: Attempt to load shared library /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so failed.
07.03. 12:48:37.619 ERROR: The library file exists, so either the program
07.03. 12:48:37.619 ERROR: don't has the privileges to access the library
07.03. 12:48:37.619 ERROR: or the library is not loadable by the shared object loader
07.03. 12:48:37.619 ERROR: Technical information:
07.03. 12:48:37.619 ERROR: Error location: GuiJniLoader.loadPlatinLibrary()
07.03. 12:48:37.619 ERROR: Error message : /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so: load ENOEXEC on shared library(s) /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so
ERROR #############################
java.lang.UnsatisfiedLinkError: /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so: load ENOEXEC on shared library(s) /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so
 at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:2144)
 at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1973)
 at java.lang.Runtime.load0(Runtime.java:773)
 at java.lang.System.load(System.java:887)
 at com.sap.platin.r3.util.GuiJniLoader.loadPlatinLibrary(GuiJniLoader.java:114)
 at com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:24)
 at com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:289)
 at com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:316)
 at com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:860)
 at com.sap.platin.base.logon.GuiImpl.evalCommandLine(GuiImpl.java:275)
 at com.sap.platin.base.logon.GuiImpl.<init>(GuiImpl.java:44)
 at com.sap.platin.base.logon.GuiImpl.main(GuiImpl.java:447)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.micro.Microkernel.invokeMainMethod(Microkernel.java:1670)
 at com.sap.platin.micro.Microkernel.startApplication(Microkernel.java:1750)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.Gui.main(Gui.java:65)
java.lang.Exception: JniAgiLibAdaptor.<init>: Cannot load JNI library
 at com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:25)
 at com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:289)
 at com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:316)
 at com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:860)
 at com.sap.platin.base.logon.GuiImpl.evalCommandLine(GuiImpl.java:275)
 at com.sap.platin.base.logon.GuiImpl.<init>(GuiImpl.java:44)
 at com.sap.platin.base.logon.GuiImpl.main(GuiImpl.java:447)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.micro.Microkernel.invokeMainMethod(Microkernel.java:1670)
 at com.sap.platin.micro.Microkernel.startApplication(Microkernel.java:1750)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.Gui.main(Gui.java:65)
ERROR #############################
07.03. 12:51:52.173 ERROR: GuiConnection: Connect failed
07.03. 12:51:52.173 ERROR: JniAgiLibAdaptor.<init>: Cannot load JNI library
ERROR #############################

Username and password issue in SAP GUI logon-Please help

Hello,
Usually I download the tx.sap file from my work system it downloads and opens the main screen directly.( password is disabled for us). Now when I connect from home(home system through VPN) ,i can download tx.sap file from my company's SAP web portal ,but when I open the same through SAP GUI on my system it pops up a password screen- the issue is my employee ID is already populated in the username tab, but when I provide my domain password (i tried all my passwords),it throws an error -you do not require a password, now when i try without a password it shows fill in all required entry fields. Please assist.

If you enter just the username, the network is not sure which "AD Domain" to contact tp authenticate you as a user. So you need to specify the domain name in any of the below 2 formats. Give it a try.
Format 1 - [email protected]
Format 2 - DOMAIN\UserName
Hope this helps.

Client ID range for SAP GUI logon?

Hi,
Does anyone know what is the range of client IDs allowed for SAP GUI logon? I am assuming it to be 000-999. Is that correct?
Any help will be greatly appreciated.
Thanks,
Venkat

Hi venkata,
As Cherry mentioned above you can choose any client with exception of 000 SAP AG, 001 Auslieferungsmandant R11 and 066 Early Watch, you can use the rest 997 clients to setup your system.
Hope this help!
Juan

How can i find SAP Gui logon pad version

how can i find SAP Gui logon pad version ?

Hi,
That's easy. At the top of the logon, you see a title bar with a general version indication. At the most left of it, you'll see an icon. Click on that and choose about SAP logon and you'll get detailed info.
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

SAP GUI 602 logon error

Similar Messages

Maybe you are looking for