SAP GUI 620 connectivity issue

Hi,
I am using SAP .NET connector 2.0.1 on windows XP machine from last 6 months. However, before a couple of days back, by machine got formatted and I had to install all the softwares again. Now when I try to connect to my SAP server using SAP GUI 620 logon pad, it says "Connection timed out". This connection gets established from various windows 2000/2003 machines but not on XP machines. Is there some special setting which needs to be done in order to use SAP GUI 620 on win XP? If not, then what could be the potential solution?

Hi,
To my understanding you have to upgrade your Microsoft Excel verion to 2007. SAP GUI may not work either for 2003 and 2010. Please ask your IT team to upgrade your Excel version to 2007.
Regards,
Vishnu.

Similar Messages

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

Errors with SAP GUI 7.10 issues with IE 7.0? and most curr patches?

We are attempting to patch our SAP GUI 7.0 with the most recent GUI patches
GUI patch 12
BW patch 500
BI patch 900
we are applying these patches to correct the following
>preview and printing of blank pages with web browser(ie 6.0)
>german lang. toolbar appearing
>missing active components when using analyzer (BW 3x)
>BI rspc error 'x dump'
these issues above have been corrected, however we are now having issues with this GUI and IE 7.0 , printing errors
As anyone had these same issues above, and could you recommend on what patch combination (if any) have corrected them
We have worked on this project for the last few months, to get the correct combination of patches that would not break anything else installed. But, now we are finding that we may have issues with IE 7,0 and the SAP GUI with the above patches.
Please advise
Maria

what happens on the desktops with IE 7.0 is that it looses printing capabilities.

SAP GUI 7.10 - Issue reading files from Solution Manager

Hi everyone,
We have just installed SAP GUI 7.10 on our PC and have tried to open documents from Solution Manager.
On both Display and Change mode we are getting "The document cannot be displayed" (SOLAR_DOC021)
Can you suggest anything regarding the source of the problem? Any quick resolution?
Thank you
Corinne

Found it myself. Tricky indeed.
http://service.sap.com/patches
- Search for Support Packages and Patches
- Enter Search Term "SAP GUI"
- Select SAP GUI FOR WINDOWS
- Select SAP GUI FOR WINDOWS 7.10 CORE
- Select SAP GUI FOR WINDOWS 7.10 CORE, on the next page also
- Select Win 32
- Arrive at avail. downloads
Regards,
Nathan

SAP Content Server Connectivity issue

Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep.    ZDMS
Description     ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no.     0046   Content Server version 4.6
HTTP server     192.168.30.12(where the content server is installed)
Port Number     1090                        SSL Port Number
HTTP Script     ContentServer/ContentServer.dll
Phys. path      D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
Basis

Hi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK"

SAP CAL HANA - Connectivity issues

I deployed SAP HANA on AWS through SAP CAL.
I can connect to the HTTP interface and the HDB through the command line.
hdbsql=> \c -i 00 -u system
Password:
Connected to HDB@vhcalhdbdb:30015
hdbsql HDB=>
But if I try to connect to port 30015 remotely I just timeout. I have the 30015 open to the world in the AWS security group.
Is there a daemon that runs on the server that accepts remote connections or do I have a AWS network issue I need to investigate?

Hi Joseph,
Most probably you are behind a corporate firewall that does not allow you to connect to port 30015. Could you try to connect from another network?
Best regards,
Stanimir

SAP GUI logon connection error: WSAECONNREFUSED

Dear Experts,
I have installed SAP 4.7, after connecting the console(SAPMMC), when trying to logging to SAP Logon, an error appears which states:
partner not reached( host: XXX.XXX.XXX.XX, service sapdp00)
WSAECONNREFUSED: Connection refused
Can anyone help me to resolve this error.
If this is not the right forum then pls guide me to the concerned to post my question.
Thanks with lots of expectations.
Praveen.

I see that you already duplicated your message on the SAP ON UNIX forum. That was the right place to post.
Please close this post here as it it not at the right place.

SAP GUI 602 logon error

Dear Experts:
we are having SAP GUI logon problem as follow:
SAP GUI 620
partner not reached (host prd.uaes.com, service sapdp03)
time     Wed Nov 26 15:56:03 2008
componet   NI (Network interface)
Release     620
version 36
Module ninti.c
Line 881
Method    NiPConnect
Return Code -10
System Call connect
Error No 10055
Error Text WSAENOBUFS: No buffer space available
Counter 1
does anybody have idea about above error?
thank you.
regards, Mao

Hello Sergo Beradze,
yes. the SAP system in prd.uaes.com host is 32bit server. we install SAP R3 4.6c sr2 version with it.
most of time the SAP PC user can connect to SAP smoothly. but sometimes some part of sap users will get the above error message which I have posted.
regards, Mao

Problem opening Crystal Report from SAP GUI through VPN

Hi Everyone,
I am facing an issue with opening the crystal report from SAP BW Role menu(SAP GUI). The issue is only with the BW Users who are connecting to the Client systems through VPN. All the settings are done perfectly in the Transaction /CRYSTAL/RPTADMIN and SICF for the CE_URL.
For those who are in the client network it works fine. Please see the URLs generated in both the cases,below.
From Client N/W
[http://sapbobj:8080/SAP/jsp/Action_Dispatch/dispatch.jsp?sap_client=100&cmsname=sapbobj:6400&language=EN&sap_sysid=D40&bw_id=4HUFYJ3XBZ7QLP5HIDYPR7PR6&sap-client=100&actionName=SAP_CrystalReport_View&appKind=InfoView&service=%2FInfoViewApp%2Fcommon%2FappService.do&loc=&initialFolderId=null]
Through VPN
[http://sapbwd.abc.com:8100/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4HUPI3I78CG4S4EDH7XSDP736&sap_sysid=(sysid)&sap_client=100&language=EN&sap-client=100]
where "sapbobj" is the BOBJ system and "sapbwd" is the SAP BW Dev box.
For me it seems to be something related to the N/W. Please provide me your valuable inputs to solve this issue.
Thanks in Advance,
Koka M
Edited by: Madan Koka on May 19, 2010 5:18 PM

Hi,
I'm also facing the same issue. when try to open my report the URL doesn;t taking "bw_id".
It is blank for all transported reports.
Any advice..
Thanks,
Jothi

Using the HTML SAP GUI inside the Enterprise Portal?

Hello everyone
In our company we plan to set up the SAP Enterprise Portal (NetWeaver 7.0). The first application we want to provide inside the portal is the SAP GUI that connects to our SAP ERP 2005 system via single sign on. Therefor two different approaches exist:
1: Using the standard SAP GUI inside a portal iView. In this case every client pc needs the SAP GUI installed.
2: Using the HTML SAP GUI. In this case we have to set up the integrated ITS in our SAP ERP system.
Now I have some questions about the second approach. Is the functionality of the HTML GUI equal to the functionality of the standard GUI? If not, what are the restrictions? How high is the additional load on the network and SAP ERP system caused by the HTML GUI? Would you recommend this approach for a system with more than thousand SAP users?

Hi Marc,
At least if you consider using webgui, you should test the transactions properly as there are some issues for example with scandinavian characters and lines visible in lists of search helps.
Also you might want to consider the limitations of the screen resolutions and space which the portal framwork already takes from the gui. This of course is a topic for both HTML/SAP GUI's.
Kind regards,
Ville

SAP Gui 7.10 setup question

Hi All
I am a complete newbie to SAP so please bear with me..
We connect to our SAP server in one of our offices in Holland and for our Windows XP systems use SAP GUI 620. However we now have a few Windows 7 systems around and the 620 installer does not work with 7 therefore I downloaded a new version of the SAP GUI - 710.
When I try and set it up though I can not proceed till I have entered a System ID, the Next button is greyed out. Previously we did not have to enter this. I notice if I enter something like U9C as in the help file we can connect fine, but I dont want to screw anything up by just entering anything, therefore what entry should I use or can I bypass it?
Any help appreciated guys
Andy

you can copy files SAP*.INI from C:\windows (from an existing WniXP machine) to your Windows 7.
Read SAP note 1031740 to know where to copy these files.

C++ Debug Assertion Failed! - when printing with LOCL method G and GUI 620

Hi all
I've just raised an OSS message with SAP but don't think they'll help as the GUI version is no longer supported... if anyone else has come across this though and has any suggestions that would be great...
Thanks
Ross
Hi
We recently upgraded a few users to the 720 SAP GUI and had issues with LOCL printing, as we were still using the older "F: Printing on Front End computer" method of printing. As per SAP Note "Note 821519 - Front-end printing with control technology" the solution is to use method "G: Front end printing with Control Tech".
However, we now get an issue with SOME users who are running the SAP GUI 620 patch 57. When they try and print to LOCL they get a pop up dialog box error:
"Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
File: fputs.c
Line: 48
Expressiom: steam != NULL"
I appreciate that this old GUI is no longer supported BUT the SAP note states that 620 patch 56 is the minimum level for method "G" to work - and previous testing showed that it DID work ok. It seems only some of the 620 patch 57 users are affected - just wondering if you can advise why and if there is a 'quick fix' for this, perhaps an updated fputs.c file or something?
The issue is that we literally have thousands of users on this version and cannot roll out 720 quickly enough & without some additional testing/costs etc. We have a 710 patch 18 version we can roll out but this can cause IE8 issues... neither do we wish to revert to control method "F" as this will then 'break' printing for those users.
We have created a LOCL_OLD printer with method "F" but some users (for various reasons, including hard coded printers in bespoke transactions) cannot select this and have to use LOCL...
If you are aware of the C++ debug assertion error and have any possible solutions that would be much appreciated.
Many thanks
Ross

> I appreciate that this old GUI is no longer supported BUT the SAP note states that 620 patch 56 is the minimum level for method "G" to work - and previous testing showed that it DID work ok. It seems only some of the 620 patch 57 users are affected - just wondering if you can advise why and if there is a 'quick fix' for this, perhaps an updated fputs.c file or something?
fputs.c is a source file that is used to compile the GUI. The assertion is thrown because an expected condition is not met. So even if you would take out the assertion, there's no guarantee it'll work because "something" on the operating system is not right.
I suggest you compare installed software and windows hotfixes on the affected PCs vs. those who don't show this error. The error may also be that after the installation of the SAPGUI another software product was installed that replaced certain DLLs that are also used by the SAPGUI.
Markus

Bandwidth required with new SAP GUi

Hey all,
I am trying to find out what is the bandwidth required for each user for each session for SAP GUI 7.0. With the old SAP GUI 620, we had 3 KB per user per session required.
Thanks in advance.
Laura

Hi Laura,
there shouldn't be very much difference. The [Sizing Guide "Front-End network requirements for SAP Business Solutions"|http://service.sap.com/~sapidb/011000358700003943521999E] doesn't mention any version dependent values.
Regards,
Peter

NW2004s ABAP Trial Version - using 2 SAP-GUI'S

hi there,
i just download the big files for nw2004s abap trial version. it includes sap gui 6.40, and i have the following problem:
we have sap r/3 4.6c now and on every client (also on mine) we have sap-gui 620 installed.
for 4.6c i still have to use sapgui 620 as i want to be on the same level then all the other users.
can i use BOTH sap-guis on ONE pc ?
regards, Martin

I do understand, and my answer comes from my culture at my company. Sorry for that. All of our users are on sapgui 6.20(not sure about patch level), I always have the latest SAPgui version/patch level, at this point 6.40 sp 22. I have not seen a gui problem in some time with the users on 6.20, but when I did, you could usually tell that it is a gui problem by the behavior and/or ABAP short dump.
I understand your feeling about being on the same level of your users, so I won't suggest that you install the 6.40 version. So, that said, you will not be able to use the NW2004s system on your machine with your SAPgui 6.20 version. And I believe that you can not have more than one instance of sapgui. When you install sapgui 6.40 it will uninstall all previous version of the gui.
Regards,
Rich Heilman

SAP GUI (SAP LOGON 620).Problem connecting to R/3

Hi I Installed SAP 4.7 successfully.I could see SAP R3 Management console started properly.After Installing SAP GUI,I tried to connect from SAP Logon.I get an error ,A box opens
Which has title 'Syntax Errors'
and fields in the box are,
Syntax error in program -
in include                      -
in line                           -
Last changed by           -
Author                         -
Any help on this would be greatly appreciated.I tried to google but could not find any reasonable answer.
I also tried to connect to R/3 from other box but the same result
Thanks in advance
Durga

Mantosh,
I dont see any user defined on my logon pad.All I see Proerties,Groups,Server,New,Delete.
Manas,
Still no luck.I changed as adviced by bu still I get 'Sytax Errors' window.
Here is my SAPLogon pad after the changes you suggested.
[Configuration]
SessManNewKey=4
[MSWinPos]
NormX=38
NormY=71
[Router]
Item1=
Item2=
[Router2]
Item1=
Item2=
[RouterChoice]
Item1=0
Item2=0
[Server]
Item1=10.10.10.12
Item2=SR1
[Database]
Item1=00
Item2=
[System]
Item1=3
Item2=3
[Description]
Item1=sap 4.7d
Item2=SAP 4.7E
[Address]
Item1=
Item2=
[MSSysName]
Item1=SR1
Item2=
[MSSrvName]
Item1=
Item2=
[MSSrvPort]
Item1=sapmsSR1
Item2=
[SessManKey]
Item1=3
Item2=2
[SncName]
Item1=
Item2=
[SncChoice]
Item1=0
Item2=0
[Codepage]
Item1=1100
Item2=1100
[CodepageIndex]
Item1=-1
Item2=-1
[Origin]
Item1=USEREDIT
Item2=USEREDIT
[LowSpeedConnection]
Item1=1
Item2=0

SAP GUI 620 connectivity issue

Similar Messages

Maybe you are looking for