SAP GUI 7.20 exit unexpectedly with Internet Explorer 9 RC

The SAPGUI 7.20 patch level 4 exits unexpectedly without reporting errors since I installed Internet Explorer 9 RC.
This seems to happen in forms with ALV lists? For example, using the transaction SM04
Tested on two computers both with windows 7 64bit
IE9RC removing all comes back to work.
Someone confirm the same problem?
Edited by: Alessandro Brunello on Feb 11, 2011 5:46 PM

SAP GUI 7.20 Patch Level 5
At me there is nothing o.k.
Already the same problem. Which Release Level of Internet Explorer 9 RC do you have ?
Does it come with the standard update for Microsoft Software ?
Only classic theme is working.
I have to say, that I have german versions installed.
Regards
Rainer
Edited by: Rainer Hopfensitz on Mar 16, 2011 11:26 AM

Similar Messages

Gui 7.0 windows xp, problem with Internet Explorer 6.0

Hello Gurus,
I am installing SAP GUI 7.00, on all the windows XP machines, of our SAP users. All the machines where GUI 7.00 is installed, are facing the problem with Internet Explorer. When we click on IE we don't get error but the requested URL do not show anything. Our version of Internet exploerer is 6.0.
Gurus, need your help on this..
Thanks and Regards,
Rahul

hi ,
thanks for letting me know my error. I will raise this problem in the correct forum
Thanks
Rahul

Is SAP BW compatible with Internet Explorer 8.0 , windows 7?

Hi,
I need to know if our SAP BW system is compatible with Internet Explorer 8.0 , windows 7 and office 2010.
Which SP we need to install?
Our system is:
SAP BW 7 (SAP NetWeaver BI 7.0)
Support package SAPKW70022
thanks in advance
Fede

Hello,
you can check note 1425805, the supported front-ends are listed there. (The answer is yes, to all 3 products you mentioned). Please note that only the 32-bit version of office is supported.
Best regards,
Ralf

Cannot print due to error message--printer working with Internet Explorer--How do I correct?

Last week printer worked fine with Firefox.
This week a message comes back "an error occurred while printing".
Printer works fine with Internet Explorer.

To test how Firefox runs "uncustomized" on your system, could you do a two-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
You'll click the Create Profile button. I recommend using the default location suggested (i.e., just ignore the option to choose a different folder). Then start Firefox in the new profile you created.
Can you print?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Authentication issues on Windows 7 with Internet Explorer 8 (Crystal 2008)

Hi,
We are in the process of migrating from Windows XP to Windows 7 (with Internet Explorer 8).
I have noticed that a web application which depends on Crystal 2008 is behaving differently in the new environment. For example, when I try to load a report I get this error:
Access to report file denied. Another program may be using it.
I know that this error can be caused by a permissions problem on the Windows temp folder, and I know there are various ways of pinpointing the exact permissions problem and various ways of resolving if that's the case. The fix that worked for us in Windows XP does not seem to work in Windows 7. My gut feeling is that IE is passing credential in some way differently from how it did before.
Since many aspects of security are so different in Windows 7 compared with XP, I was hoping to find some general guidelines from SAP/Crystal re: how to deploy or configure the client/server in this environment.
Are there any general guidelines available?
Thank you for any help... shannon

Hi Shannon,
Not really, CR assumes it can access all of it's dependencies so it is a permission issue. Other than the usual config issues with IIS, full access to the emp folder, full permissions on the Viewer folder, setting the framework in App pool correctly, etc.
Do you have Service Pack 3 installed for Cr 2008 and the latest Fix Pack 3.5?
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip ( requires uninstall first - keycode is required )
Incremental for SP2 - https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Fix Pack: https://smpdl.sap-ag.de/~sapidp/012002523100006341722011E/cr2008fp35.exe
References for WEB app's:
[Crystal Report Viewers in Visual Studio .NET u2013 Toolbar Images|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a]
This one could be a great reference also:
[Deploying Crystal Reports 10 .NET Applications|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/30c6d7c6-7164-2b10-90b8-d6020b116f4d]
You could also use Process Monitor from Microsoft and scan the log file for Access Denied on the IIS Process.
And also search [Microsoft's Forums|http://social.msdn.microsoft.com/Search/en-US?query=iis%207%20configuration%20and%20security&Refinement=123&ac=3] on how to:
Thank you
Don

E-commerce with Internet Explorer 7.0

Hi All,
Is SAP E-Commerce application compatable with internet explorer 7.0.
As making changes in UI (style sheet ) there is lot of change in IE6 to IE7.
Please advice.
Thanks,
Devender

We are running SAP CRM 4.0
ISA_B2B (internet sale application)
ICSS_B2C (internet customer self service B2C)
ICSS_B2C (internet customer self service B2B)
EP6 (Enterprise Portal 6.0)
We find it very difficult to maintain support for all browsers.
We do try to ensure that our e-commerce apps work correctly in the top 3 browsers.
Browser support is going to get more and more difficulty with the release of Google Chrome and IE8.
I would recommend keeping any UI changes/updates in SAP e-commerce web apps to a minimum.

How did i know the version of Jiniator with Internet Explorer

Hello,
I want to know if a version of Jinitiator is installed with a dynamic page executed with Internet Explorer.
I want a page to help users for install a new version of Jinitiator
Regards

No you're question wasn't to vague, I was able to get the basic idea of what you were asking.
As for an automatic way to convert bat scripts to shell scripts, I won;t say there isn't something out there, out there is a big place, but I doubt it. As I wrote the differences between the systems make a direct conversion difficult.
On OS X you have two choices for scripting, shell scripts and Applescripts. Shell scripts are your basic Unix command files, are created in a text editor and run from the Terminal command line.
Applescripts are created with the Applescript editor, have a tighter link with OS X, and are run from the GUI.
(all of that is very basic and there are exceptions to what I wrote but that is the intro version)
If you have a script from Windows that did something that you would like to have done on OS X you can transfer the what but not the how. That is you can do the same thing (automate backups in this case) but how you go about that will be different.
If you;re intereested in learning scripting on OS X (either shell or Applescript) this could be a good project to start with. You know what you want you just have to figure out how to do it in OS X now. If this is the case I'd suggest you start a new thread in the Mac OS X Technologies group. That is where scripting is usually discussed.
good luck
regards

When I try to open a bookmark I get a box that says "what should firefox do with this file?" When I try to change the "open with Internet Explorer" I can't find firefox ? Last week this bookmark worked fine.

When I open a bookmark a box pops up that says "What should firefox do with this file? "open with Internet Explorer? When I browse I can't find firefox to change to. Last week this book mark worked perfectly.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Portal content is not displayed with Internet Explorer

Hi colleagues,
We configured our SAP portal for anonymous user access. The first time this anonymous user accesses the portal, the content of the first page in the navigation is displayed correctly in the content area. However, if after that the user selects another page in the navigation (or even the same first page), the navigation is performed (i.e. corresponding node in the navigation is selected), but no content is displayed in the content area - just a blank page.
This problem happens only with the anonymous user (if using other users it works fine) and only if using Internet Explorer. I found a SAP note - 872618 (Internet Explorer May Appear to Stop Responding), describing a similar problem with Internet Explorer, but the offered patch by Microsoft is for older versions of Internet Explorer only (6.0 SP1) and is not applicable for my version of IE, which is 7.0. The content is displayed correctly with Mozilla and also with IE, but with the other, non-anonymous users.
Portal version is 7.0 SP12.
Do you have an idea what could cause this problem?
Many thanks,
Georgi

Hi,
<i>The content is displayed correctly with Mozilla and also with IE, but with the other, non-anonymous users.</i>
I didn't understand if with other browsers it is working or not...
In case the iViews are presenting KM content please check the restrictions section <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/cd/1aad4abcb98c4597f9e395a6b62f43/frameset.htm">here</a>
Rgds,
Roy

Unable to read web mail with talktalk but can with internet explorer

I updated to fire fox 4 and since I am unable to read my web mail from my talk talk account. When I try to get into my inbox it tells me I have undefined new mail. I can access my email with internet explorer but not firefox.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Why does my Web Handler work with Internet Explorer, but not with Firefox

I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
var WebHandler = "Example.xml"
tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
/GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
that returns the XML that it is supposed to.
I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
Thank you, Robert.

Problem solved. The issue: Content Type was not correct.
Visual Studio creates the web handler with dummy code like this: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
context.Response.ContentType = "text/plain"
context.Response.Write("Hello World")
End Sub
I wrote a database query that set a string variable to the XML I wanted: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim Outstring as string
' my logic to fill Outstring with XML
context.Response.ContentType = "text/plain"
context.Response.Write(Outstring)
End Sub
This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
context.Response.ContentType = "text/plain"
should be
context.Response.ContentType = "text/xml"
It now works with IE, FF, and Chrome, and presumably all others.

How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?

Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16

ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely.

Youtube not running in firefox, but works with internet explorer

when i open you tube in Firefox, it does not run the videos. however the same runs good with internet explorer. a few weeks back the videos were running quite good with Firefox also.

Hi,
You can try to '''Clear Now''' the '''Cache''', '''Cookies''', and '''Site Preferences''' in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History] as well as '''Delete all''' in the Windows '''Control Panel''' > '''Flash Player''' > '''Storage''' tab.
If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related files in all the different configuration areas/modules of the security software. Instead create new allow/trusted rules for Firefox + its related processes. Even otherwise the security software may also ask again when Firefox is started and you can try to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

Adobe reader x does not work while in firefox but works with internet explorer

while in firefox 6.0 i cannot open pdf files with adobe reader x. how do configure firefox correctly as i have no problem with internet explorer opening pdf files? os is win7 ultimate.

See [https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Adobe FlashPlayer paired with Internet Explorer 8 shows Plug-In version Not Installed?

Active X version is 11.7.700.202 I am being told that for a new program (Remedy) we are going to be using that the Plug-In version needs installed or the web-based application will not work. Is there any way to install the Plug-In version in addition to the Active X Version when paired with Internet Explorer?

You can download the plugin installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...).

SAP GUI 7.20 exit unexpectedly with Internet Explorer 9 RC

Similar Messages

Maybe you are looking for