SAP GUI 7.20 patch 2 and Telephony Issues

Our Call Centers are forced to delete phone numbers via t-code SPHB SAPphone: System Administration and then re-add them using tcode FPHA.  This is the only way to re-enable the phone Pop-Up and the new SAP GUI 7.20 patch 2 is installed.  I am looking for a fix but can't find anyting.

We finally came up with a work around as follows:
The issue with the SAPPhone on Windows 7 is a u201Csecurityu201D issue having UAC enabled. Windows 7 would not let SAP u201CAddu201D the SAPPhone registry key under HKLM\Software\SAP. This resulted in SAP saving the registry entries in the User section of the registry. No problem for the first/setup user but forced each additional  user to re-run the setup.
We included a utility u201Cregini.exeu201D and a configuration file  u201Csapphone.iniu201D  to grant Local Administrators full rights to the SAPPhone registry key structure. This will allow the keys to be created in the common section of the registry available to all users on the workstation.
We have a Customer Message open on this as well.  Microsoft does not recommend deactiviating UAC so once again Microsoft and SAP are not the same sheet of music.  We hope SAP will come out with a long term solution other than deactivationg UAC.

Similar Messages

  • SAP GUI 7.10 patch 16 and Windows 7 Home Premium

    Hi,
    I've been searching and I can't get to any clear conclusion. Is it not possible to connect to an SAP system if you use Windows 7 Home Premium?
    Is there any work around?
    Cheers,
    JS

    Hello,
    please look at the sap note #66971 !
    Windows 7 32bit (only "Professional", "Ultimate" and "Enterprise"
    editions).
    Windows 7 64bit edition on x64 (AMD) and Intel EM64T (only
    "Professional", "Ultimate" and "Enterprise" editions).
    Thats all !
    Best Regards, Sven

  • Error messages Sap gui 7.1 pl 6 and 7 + guixt

    Hello,
    We have a problem with SAP GUI 7.10 PL 6 and 7 in combination with GUIXT  2008-Q2-1. When the user is starting a transaction that is combined with GUIXT, they are getting mostly three error messages:
    Message 1:
    "Not enough memory - please increase virtual memory (get memory:length=25728 file=C:\Source\grilb\..\grlib\smtable.cpp line=13)"
    Message 2:
    "Not enough memory for internal table (table name=cntl occu=32 leng=804)"
    Message 3:
    "PRD: maximum work process hold time execeeded"
    The problems occur  since patch level 6. We tried somes solutions:
    Solution 1:
    Install the newest  version of GUIXT, no results.
    Solution 2:
    Upgrade SAP GUI with patch level  7, no results.
    Solution 3:
    Uninstall SAP GUI 7.1 PL 7 and reinstall  an older version of  SAP GUI 7.1 PL3, the problem is solved.  
    Can someone tell me what these error messages mean and if there has been a bug in SAP GUI 7.10 patch level 6 and 7?
    Thanks,
    Alex

    Hi Matthew,
    I do not know whether A. De Cesare and Steve Wojnicki still see this issue in their installations. In my comment above I suggested to use a higher SAP GUI patch level (PL8 or above).
    We (Synactive) could not yet find out what is causing this problem; a couple of installations reported it in the past. What we found out is that
      - the error occurs with SAP GUI 7.10 PL6 and PL7, but never occured in earlier patch levels or in later patch levels
      - it occurs on certain PCs only, but we do not know what differentiates those PCs from others that run the same application+scripts without problems
    Gerhard

  • SAP GUI 7.10  patch level 3 installation issuee

    Dear All,
    I  tied to install SAP GUI 7.10 patch level 3  in windows 2000 OS
    Please help me in Installing the SAP GUI 7.10 in windows
    Thanks

    Hi,
    Pls check service.sap.com/sapgui
    Eddy
    PS. Reward useful answers and earn points yourself

  • SAP GUI 7.20 for Windows and problem with Screen Painter

    Hello,
    I just installed the SAP GUI 7.20 for Windows and it looks good.
    But when when I start the Screen Painter for a dynpro I get the following message:
    Graphical Layout Editor not available. Continue with alphanumeric editor.
    And: EU_SCRP_WN32 Connection broken  '..' / CPIC
    The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
    Any idea?
    Regards,
    Ole.

    Hello,
    I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
    And now I will update the Screen Painter with the information from the OSS-Note!
    Thank's for your help!
    Regards,
    Ole.

  • RRI Jump Works with SAP GUI 7.20 Patch 3 but not with Patch 4

    Hi,
    I have an a RRI  jump to an R/3 transaction working when executed via  7.20 GUI for Windows - Patch 3.  However, the same jump does not work when executing with an updated GUI to patch level 4.  There is no error message, nothing happens.  I tried recreating the RRI with the new GUI patch and it didn't solve the problem.
    I saw a couple of OSS Notes taking about enhanced security for patch 4, i.e. 1526048 & 1397000).  Is this related?
    Has anyone else had a similar issue?
    Thanks,
    Sheila

    Hi Martin,
    where did you get this info? Any official SAP note available? Do you encounter similar problems?
    We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
    I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

  • Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

    Hi all,
    I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success.  The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly.  The new functionality in Bex Analyzer do not respond when clicking on the icons.
    Thanks,
    Dirko

    Hello
    please download the compialtion 3 cd of sapgui 710.
    http://service.sap.com/installations
    Entry by Application Group
    SAP Frontend Components
      SAP GUI FOR WINDOWS
       SAP GUI FOR WINDOWS 7.10 CORE
        Installation
    Compilation 3 cd is delivered with the sapgui patch level 11!
    Also the sapgui patche you can find in
    http://service.sap.com/patches
    Best Regards
    Sven

  • SAP GUI 7.20 patch rollback

    Hello all,
    We are in the process of implementing SAP GUI 7.20 globally using Installation Servers.
    I just wanted to pose a "what if" question...
    Is there a way to roll back your SAP GUI's to a prior patch if SAP releases a GUI patch that causes major issues in our environment?
    Ex: We are on patch 6, we update to patch 7 and there is a critical issue that was missed in QA, which breaks our production end users.
    Can I simply apply the previous patch over the new one on the IS server?  Or would I be at the mercy of OSS Messages and waiting for SAP to release a hot fix?
    Thanks.

    Hello Ben
    no, that is not possible. The Patch scenario will compare the file versions during the
    update. Only higher versions will copied to the client. A lower version does not copied
    to the client.
    It is only possible, that you deinstall the Sapgui with command line
    nwsapsetup /uninstall /all /nodlg
    Then you can install the Sapgui again, with the patchlevel you want.
    Best Regards
    Sven

  • SAP GUI 7.20 Patch 4 server

    Before opening a note to SAP I am going to post this issue here, I built a SAP GUI Server 7.20 from the latest CD and upgraded it patch level 4,  and I have also created a package with certain components installed that we use.
    http://i965.photobucket.com/albums/ae131/dendkmac/Work%20related/SAP_Install_Error_1.png

    Hello Dennis
    which OS do you use on the frontend where the sapgui should install?
    A requirement is not fullfilled. Please check if all requirements are fulfilled on this frontend PC.
    Normaly only the DOT NET 2.0  is a requirement for our sapadmin tioll and for the BEX.
    Please check this notes
    #1425805
    #147519
    But i think it is better, you open OSS message in Bc-FES-INS and tell me the message number.
    Then i can see the log files.
    best regards
    Sven

  • SAP GUI 7.20 Patch 5 / 6 Problem

    Dear all,
    I installed the GUI 7.20 Patch 5 several weeks ago, since then the Transaction DB13 doesnt show the Planning calender.
    It says "Determining version data" in the lower left corner and nothing else happens. With the help of SM04 I can cancel the transaction.
    After the installation of Patch 6 the Transaction DB13 worked for one time. Since then it shows the same text "Determining version data".
    My PC is running Windows 7 SP1, the Internetexplorer 9 is installed. Our SAP System ist a ERP 6 ABAP  System with EHP4 installed.
    Any idea?
    Best Regards
    Peter

    Hallo Sven,
    many thanks for your reply.
    I can confirm that the RTM Version 9.0.8112.16421 is installed.
    Regards
    Peter

  • SAP GUI 7.10 overwrites SAP GUI 6.40 once installed and any problem

    Hi,
    Currently I am using SAP GUI 6.40 for my SAP logon,
    but if I install the Internet explorer 7.0 then in SAP transactions F1 help information will not support for this and information on the screen will be blank.
    As per my understanding if we use SAP GUI 6.40 we cann't use the Internet explorer version 7.0. I heard by using SAP GUI 7.10 we can use the Internet Explorer 7.0 with out any problem to F1 help in SAP transactions.
    I have got the path to download the SAP GUI 7.10. If I install will it automatically upgrades the older version, and no more we can use SAP GUI 6.40.Because I am functional consultant I don't know deep about that. So if any problem occurs during the Installation of SAP GUI 7.10 then my SAP log on will be  in problem and cann't use the same SAP GUI 6.40.
    Please share your information on this.How I can go about that without any problem to my SAP activities upon installation. Is there Basis consultant is required for this.
    rgds
    Swamy

    Hi Swamy G S. I'm just install the SAP GUI 6.40 on my test PC -->
    MAIN MODULE INFORMATION:
       Name............: saplogon.exe
       Description.....: SAP Logon для Windows
       Product version.: 640 Final Release
       File version....: 6405.5.26.1027
       Build number....: 917864
    The OS is XP SP2.  The IE 7.0 build 7.0.5730.11
    And the help F1 works fine.
       Try to patch the SAP GUI 640 at least to 26 PL.
    Regadrs.

  • Bug fix for SAP GUI for Windows 6.40 and MS Internet Explorer 7.00

    With upgrading your MS Internet Explorer to release 7.00 and running SAP GUI for Windows 6.40 the GUI controls based on HTML might work no longer properly. To fix this bug it is neseccary to patch your SAP GUI to patchlevel 23.  Download the https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/00ebf59c-4c84-2910-dea9-a40963adc659 [original link is broken] [original link is broken] and run the exe-file on the machine where the SAP GUI for Windows 6.40 is installed.

    Unfortenately it still doesn't work properly with this patch. Using Tx sbwp, se80 or pftc you have still the same GUI control problems.
    regards,
    christian

  • Problemin installing SAP GUI 7.10 Patch level 11

    Hi,
    I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
    patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
    front end components on windows vista but it giving the problem .
    Plzz provide me guidelines tosolve this problem.

    Hello
    please download the compialtion 3 cd of sapgui 710.
    http://service.sap.com/installations
    Entry by Application Group
    SAP Frontend Components
      SAP GUI FOR WINDOWS
       SAP GUI FOR WINDOWS 7.10 CORE
        Installation
    Compilation 3 cd is delivered with the sapgui patch level 11!
    Also the sapgui patche you can find in
    http://service.sap.com/patches
    Best Regards
    Sven

  • How do I check if I need SAP GUI 7.10 Patch-Level 7?

    Hi,
    I have installed SAP GUI 7.10 client.
    After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
    This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
    My version for the SAPGUI installer is 2008.0.0.187
    From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
    Does anyone know if my SAPGUI would require Patch-Level 7?
    Thanks.
    HY

    Thanks for replying.
    This is my SAP logon info, do it looks alright?
    Release: 710 Final Release
    File Name: saplogon.exe
    File Version 7100.1.0.1027
    Build: 0
    Patch Level: 0
    These are my installed component. Could it be that none of the below components need to be patched?
    1. SAP GUI Suite
    2. R/3 Add-on
    3. General Add-on
    4. Legacy Components
    5. CRM Add-on
    Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

  • Problem in Installing SAP GUI 6.2 Patch 57

    Hi friends,
         Currently we have SAP GUI 6.2 version for Windows with Patch level 32. We need to update with Patch level 57. But, we are ending with an error saying SAP GUI front end needs to be installed. Could anyone please help in resolving this problem?
    Thanks,
    Sharmila

    Hi,
    We didn't apply SAP setup patch 12 which is a pre-requisite for applying patch level 57. Now it is working fine. Anyway, thank you for your guidance.
    Thanks,
    Sharmila

Maybe you are looking for