SAP GUI 7.20 Patch 4 server

Before opening a note to SAP I am going to post this issue here, I built a SAP GUI Server 7.20 from the latest CD and upgraded it patch level 4, and I have also created a package with certain components installed that we use.
http://i965.photobucket.com/albums/ae131/dendkmac/Work%20related/SAP_Install_Error_1.png

Hello Dennis
which OS do you use on the frontend where the sapgui should install?
A requirement is not fullfilled. Please check if all requirements are fulfilled on this frontend PC.
Normaly only the DOT NET 2.0 is a requirement for our sapadmin tioll and for the BEX.
Please check this notes
#1425805
#147519
But i think it is better, you open OSS message in Bc-FES-INS and tell me the message number.
Then i can see the log files.
best regards
Sven

Similar Messages

SAP GUI 7.20 patch version 4 error: runtime error

Hi Experts,
My developement getting error while running\opeing crystal reports
the error is
Microsoft Visual C++ Runtime Error
Runtime Error !
program M:\spvgui8...
R6030 - CRT not intialized
let me know if any patch is required to opening the crystal report
Edited by: vasu k on May 16, 2011 1:53 PM

Hai,
Please move the thread to SAP GUI forum under Application server.
You will get some expert advise under SAP GUI forum dedicated for SAP GUI related issues.
Thanks.
Regards,
Yoganand.V

SAP GUI 7.20 patch 2 and Telephony Issues

Our Call Centers are forced to delete phone numbers via t-code SPHB SAPphone: System Administration and then re-add them using tcode FPHA. This is the only way to re-enable the phone Pop-Up and the new SAP GUI 7.20 patch 2 is installed. I am looking for a fix but can't find anyting.

We finally came up with a work around as follows:
The issue with the SAPPhone on Windows 7 is a u201Csecurityu201D issue having UAC enabled. Windows 7 would not let SAP u201CAddu201D the SAPPhone registry key under HKLM\Software\SAP. This resulted in SAP saving the registry entries in the User section of the registry. No problem for the first/setup user but forced each additional user to re-run the setup.
We included a utility u201Cregini.exeu201D and a configuration file u201Csapphone.iniu201D to grant Local Administrators full rights to the SAPPhone registry key structure. This will allow the keys to be created in the common section of the registry available to all users on the workstation.
We have a Customer Message open on this as well. Microsoft does not recommend deactiviating UAC so once again Microsoft and SAP are not the same sheet of music. We hope SAP will come out with a long term solution other than deactivationg UAC.

SAP GUI 7.10 patch level 3 installation issuee

Dear All,
I tied to install SAP GUI 7.10 patch level 3 in windows 2000 OS
Please help me in Installing the SAP GUI 7.10 in windows
Thanks

Hi,
Pls check service.sap.com/sapgui
Eddy
PS. Reward useful answers and earn points yourself

SAP GUI 7.20 patch rollback

Hello all,
We are in the process of implementing SAP GUI 7.20 globally using Installation Servers.
I just wanted to pose a "what if" question...
Is there a way to roll back your SAP GUI's to a prior patch if SAP releases a GUI patch that causes major issues in our environment?
Ex: We are on patch 6, we update to patch 7 and there is a critical issue that was missed in QA, which breaks our production end users.
Can I simply apply the previous patch over the new one on the IS server? Or would I be at the mercy of OSS Messages and waiting for SAP to release a hot fix?
Thanks.

Hello Ben
no, that is not possible. The Patch scenario will compare the file versions during the
update. Only higher versions will copied to the client. A lower version does not copied
to the client.
It is only possible, that you deinstall the Sapgui with command line
nwsapsetup /uninstall /all /nodlg
Then you can install the Sapgui again, with the patchlevel you want.
Best Regards
Sven

SAP GUI 7.20 Patch 9 Update failed

Hello,
I have patched my Intallation Server with Sap GUI 7.20 Patchlevel 9.4, but the automatic workstation updater fails on the local workstation. Every time when I start SAP GUI it will be updatet ("an update is avaliable on the installation source...")
In the log-file (NwSapSetup.log) is one error:
10:44:28 NwSapsAtlC 1        |-----SAP Automatic Workstation Update --> Installed
10:44:28 NwSapsAtlC 1        |---     |---SAPSetup Automatic Workstation Update Service --> Installed
10:44:28 NwSapsAtlC 1E Fixing the inconsitent state by removing the older version from the database.
10:44:28 NwSapsAtlC 1
How can I fix this problem?
Thanks.
Dirk

Hello Jude,
thanks for your answer, but it dosn't work.
I have patchd the install server with:
- SAPSETUP90P1SP00_3-20008539.exe
- SAPSETUP90P2SP00_3-20008539.exe
- gui720_10-10007878.exe
The problem is the same, tha automatic WS updater means every time he has an new update, but he can't install it.
I create an Error-report Link:[https://service.sap.com/sap/support/message/D/002007974700000562722012]
Dirk

RRI Jump Works with SAP GUI 7.20 Patch 3 but not with Patch 4

Hi,
I have an a RRI jump to an R/3 transaction working when executed via 7.20 GUI for Windows - Patch 3. However, the same jump does not work when executing with an updated GUI to patch level 4. There is no error message, nothing happens. I tried recreating the RRI with the new GUI patch and it didn't solve the problem.
I saw a couple of OSS Notes taking about enhanced security for patch 4, i.e. 1526048 & 1397000). Is this related?
Has anyone else had a similar issue?
Thanks,
Sheila

Hi Martin,
where did you get this info? Any official SAP note available? Do you encounter similar problems?
We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

How do I check if I need SAP GUI 7.10 Patch-Level 7?

Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HY

Thanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
Dirko

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

Problem in Installing SAP GUI 6.2 Patch 57

Hi friends,
Currently we have SAP GUI 6.2 version for Windows with Patch level 32. We need to update with Patch level 57. But, we are ending with an error saying SAP GUI front end needs to be installed. Could anyone please help in resolving this problem?
Thanks,
Sharmila

Hi,
We didn't apply SAP setup patch 12 which is a pre-requisite for applying patch level 57. Now it is working fine. Anyway, thank you for your guidance.
Thanks,
Sharmila

SAP GUI 7.20 Patch 5 / 6 Problem

Dear all,
I installed the GUI 7.20 Patch 5 several weeks ago, since then the Transaction DB13 doesnt show the Planning calender.
It says "Determining version data" in the lower left corner and nothing else happens. With the help of SM04 I can cancel the transaction.
After the installation of Patch 6 the Transaction DB13 worked for one time. Since then it shows the same text "Determining version data".
My PC is running Windows 7 SP1, the Internetexplorer 9 is installed. Our SAP System ist a ERP 6 ABAP System with EHP4 installed.
Any idea?
Best Regards
Peter

Hallo Sven,
many thanks for your reply.
I can confirm that the RTM Version 9.0.8112.16421 is installed.
Regards
Peter

Problemin installing SAP GUI 7.10 Patch level 11

Hi,
I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
front end components on windows vista but it giving the problem .
Plzz provide me guidelines tosolve this problem.

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

Sap gui on windows terminal server

Hi,
are there best practices to install sap gui 7.30 on a Windows terminal Server 2008 r2?
Regards
Zulma

hi Zulma,
Please follow the step by step guide.
SAP GUI 7.30
Example
How To Install SAP GUI 7.30 on Windows 8
SAP GUI for Java 7.30 Release Notes
Regards,
Jamil

Tips to install Sap Gui On Windows Terminal Server 2003

Does anybody know any method to install SapGui on Windows Terminal Server 2003 to share it to many users ?
The problem is: when I try to install Sap Gui 6.40 via Control Panel-Add/Remove Programs it tells me that I must change the mode with "change user /install". I dont know the reason why it reports me that if I do it via Control Panel. And if I do that and then I launch the installation again it reports me the warning again.
What should I do ?
Thanks in advance for your help.

We have SAP R3 4.6C.
We want to optimize the bandwidth in a 802.11b radio. Because of that we dont want to run any application in the hand-held.
We'll intend to launch a remote desktop on a dozen hand-helds connecting the Windows 2003 Terminal Services server. In this server we could run SAP GUI, WebSapconsole or the browser.
Its important to note that the hand-held computers must only show the designed windows (sized to 16x20), removing title bars, transaction bar, menu bars, tool bars, status bars, etc. For this purpouse I think we can use WebSapconsole.
With this method we have noticed that when a error or warning is displayed it hides some part of the screen instead of presenting in the status bar.
I hope you all your doubts are clear now, if not just tell me.
Thank you.
PS. Sorry for my english.

SAP GUI 7.10 patch 16 and Windows 7 Home Premium

Hi,
I've been searching and I can't get to any clear conclusion. Is it not possible to connect to an SAP system if you use Windows 7 Home Premium?
Is there any work around?
Cheers,
JS

Hello,
please look at the sap note #66971 !
Windows 7 32bit (only "Professional", "Ultimate" and "Enterprise"
editions).
Windows 7 64bit edition on x64 (AMD) and Intel EM64T (only
"Professional", "Ultimate" and "Enterprise" editions).
Thats all !
Best Regards, Sven

SAP GUI 7.20 Patch 4 server

Similar Messages

Maybe you are looking for