SAP GUI 7.20 Patch 9 Update failed

Hello,
I have patched my Intallation Server with Sap GUI 7.20 Patchlevel 9.4, but the automatic workstation updater fails on the local workstation. Every time when I start SAP GUI it will be updatet ("an update is avaliable on the installation source...")
In the log-file (NwSapSetup.log) is one error:
10:44:28 NwSapsAtlC 1        |-----SAP Automatic Workstation Update --> Installed
10:44:28 NwSapsAtlC 1        |---     |---SAPSetup Automatic Workstation Update Service --> Installed
10:44:28 NwSapsAtlC 1E Fixing the inconsitent state by removing the older version from the database.
10:44:28 NwSapsAtlC 1
How can I fix this problem?
Thanks.
Dirk

Hello Jude,
thanks for your answer, but it dosn't work.
I have patchd the install server with:
- SAPSETUP90P1SP00_3-20008539.exe
- SAPSETUP90P2SP00_3-20008539.exe
- gui720_10-10007878.exe
The problem is the same, tha automatic WS updater means every time he has an new update, but he can't install it.
I create an Error-report Link:[https://service.sap.com/sap/support/message/D/002007974700000562722012]
Dirk

Similar Messages

SAP GUI 7.20 patch 2 and Telephony Issues

Our Call Centers are forced to delete phone numbers via t-code SPHB SAPphone: System Administration and then re-add them using tcode FPHA. This is the only way to re-enable the phone Pop-Up and the new SAP GUI 7.20 patch 2 is installed. I am looking for a fix but can't find anyting.

We finally came up with a work around as follows:
The issue with the SAPPhone on Windows 7 is a u201Csecurityu201D issue having UAC enabled. Windows 7 would not let SAP u201CAddu201D the SAPPhone registry key under HKLM\Software\SAP. This resulted in SAP saving the registry entries in the User section of the registry. No problem for the first/setup user but forced each additional user to re-run the setup.
We included a utility u201Cregini.exeu201D and a configuration file u201Csapphone.iniu201D to grant Local Administrators full rights to the SAPPhone registry key structure. This will allow the keys to be created in the common section of the registry available to all users on the workstation.
We have a Customer Message open on this as well. Microsoft does not recommend deactiviating UAC so once again Microsoft and SAP are not the same sheet of music. We hope SAP will come out with a long term solution other than deactivationg UAC.

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

SAP GUI 7.10 patch level 3 installation issuee

Dear All,
I tied to install SAP GUI 7.10 patch level 3 in windows 2000 OS
Please help me in Installing the SAP GUI 7.10 in windows
Thanks

Hi,
Pls check service.sap.com/sapgui
Eddy
PS. Reward useful answers and earn points yourself

Some patches update fail

Hi All
my customer scan one workstation ,and deliver 6 patches to this client. but he find only 5/6 patches update fine. I check the setting of the ZPM Bundle, all patches were set "continue on failure"....why the patch update fail (it is unpatched on this workstation),and whether the Bundle will auto re-send the patch again or not ?
wyldkao

wyld,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

RRI Jump Works with SAP GUI 7.20 Patch 3 but not with Patch 4

Hi,
I have an a RRI jump to an R/3 transaction working when executed via 7.20 GUI for Windows - Patch 3. However, the same jump does not work when executing with an updated GUI to patch level 4. There is no error message, nothing happens. I tried recreating the RRI with the new GUI patch and it didn't solve the problem.
I saw a couple of OSS Notes taking about enhanced security for patch 4, i.e. 1526048 & 1397000). Is this related?
Has anyone else had a similar issue?
Thanks,
Sheila

Hi Martin,
where did you get this info? Any official SAP note available? Do you encounter similar problems?
We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

SAP GUI 7.20 patch rollback

Hello all,
We are in the process of implementing SAP GUI 7.20 globally using Installation Servers.
I just wanted to pose a "what if" question...
Is there a way to roll back your SAP GUI's to a prior patch if SAP releases a GUI patch that causes major issues in our environment?
Ex: We are on patch 6, we update to patch 7 and there is a critical issue that was missed in QA, which breaks our production end users.
Can I simply apply the previous patch over the new one on the IS server? Or would I be at the mercy of OSS Messages and waiting for SAP to release a hot fix?
Thanks.

Hello Ben
no, that is not possible. The Patch scenario will compare the file versions during the
update. Only higher versions will copied to the client. A lower version does not copied
to the client.
It is only possible, that you deinstall the Sapgui with command line
nwsapsetup /uninstall /all /nodlg
Then you can install the Sapgui again, with the patchlevel you want.
Best Regards
Sven

Problem in Installing SAP GUI 6.2 Patch 57

Hi friends,
Currently we have SAP GUI 6.2 version for Windows with Patch level 32. We need to update with Patch level 57. But, we are ending with an error saying SAP GUI front end needs to be installed. Could anyone please help in resolving this problem?
Thanks,
Sharmila

Hi,
We didn't apply SAP setup patch 12 which is a pre-requisite for applying patch level 57. Now it is working fine. Anyway, thank you for your guidance.
Thanks,
Sharmila

How do I check if I need SAP GUI 7.10 Patch-Level 7?

Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HY

Thanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
Dirko

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

SAP GUI 7.20 Patch 4 server

Before opening a note to SAP I am going to post this issue here, I built a SAP GUI Server 7.20 from the latest CD and upgraded it patch level 4, and I have also created a package with certain components installed that we use.
http://i965.photobucket.com/albums/ae131/dendkmac/Work%20related/SAP_Install_Error_1.png

Hello Dennis
which OS do you use on the frontend where the sapgui should install?
A requirement is not fullfilled. Please check if all requirements are fulfilled on this frontend PC.
Normaly only the DOT NET 2.0 is a requirement for our sapadmin tioll and for the BEX.
Please check this notes
#1425805
#147519
But i think it is better, you open OSS message in Bc-FES-INS and tell me the message number.
Then i can see the log files.
best regards
Sven

SAP GUI 7.20 Patch 5 / 6 Problem

Dear all,
I installed the GUI 7.20 Patch 5 several weeks ago, since then the Transaction DB13 doesnt show the Planning calender.
It says "Determining version data" in the lower left corner and nothing else happens. With the help of SM04 I can cancel the transaction.
After the installation of Patch 6 the Transaction DB13 worked for one time. Since then it shows the same text "Determining version data".
My PC is running Windows 7 SP1, the Internetexplorer 9 is installed. Our SAP System ist a ERP 6 ABAP System with EHP4 installed.
Any idea?
Best Regards
Peter

Hallo Sven,
many thanks for your reply.
I can confirm that the RTM Version 9.0.8112.16421 is installed.
Regards
Peter

SAP GUI 7.20 patch version 4 error: runtime error

Hi Experts,
My developement getting error while running\opeing crystal reports
the error is
Microsoft Visual C++ Runtime Error
Runtime Error !
program M:\spvgui8...
R6030 - CRT not intialized
let me know if any patch is required to opening the crystal report
Edited by: vasu k on May 16, 2011 1:53 PM

Hai,
Please move the thread to SAP GUI forum under Application server.
You will get some expert advise under SAP GUI forum dedicated for SAP GUI related issues.
Thanks.
Regards,
Yoganand.V

Problemin installing SAP GUI 7.10 Patch level 11

Hi,
I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
front end components on windows vista but it giving the problem .
Plzz provide me guidelines tosolve this problem.

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

Cannot open cmc sap authentication - role and alias update failing

I have two business objects environments. For two of them I am failing to login to a specific part of CMC.
I want to go to Authentication tab, SAP authentication. The page is not opening.
I have on both environments 500.000 + Failed jobs. (settings - view global system metrics).
I have the feeling my CRYSTAL user account's password has expired and the 500k+ failed schedules are due to the scheduled update of roles and aliases which is failing.
Can anybody tell me how to cleanup these 500k events, and hopefully being able to access my sap authentication again (and update the password for crystal user? They cannot be deleted from instance manager.
Any help is appreciated. Thanks!

Dear Seb. I tried. No result. Let me share some screenshots to desribe my issue.
what did I also try: redeploying BOE webapplication. Without success.
My question is: how do I remove these failed instances from the system? Because I think that is a start of the solution.
.. the admintoos entry (from upgrade management tool) was still increasing... It runs awfully long.

SAP GUI 7.20 Patch 9 Update failed

Similar Messages

Maybe you are looking for