SAP GUI 7.20 PL6 still has wrong input cursor position on Win7 note:1563650

Hi Experts,
we started testing the SAP GUI 7.20 PL6 yesterday and sadly found out that on our Win7(x64) machines one issue that was supposed to be fixed is still present. The Issue is described in Note 1563650:
If you try to position the input cursor within a Dynpro field with a mouse click, you will almost always set it to a wrong position (one character too far left), when the SAP GUI runs on Windows 7.
The solution is supposed to be PL6.
We experience this issue especially on numerical fileds.
Is anyone else experiencing this issue with PL6 & Win7?
Thanks in Advance

Hello Jacob,
I have had no reports that the issue persisted after patch 6 was installed.
Does a clean reinstall of the SAPGui help?
An installation check 'nwcheckworkstation' from the command line will advise if there are any install errors.

Similar Messages

SqlDeveloper 4.1 still has wrong sync package&body suggestion

SqlDeveloper 4.1 still has wrong sync package&body suggestion

as in SqlDeveloper 4.1EA2 has wrong sync package&body suggestion

I updated my Apple ID but my I Cloud account still has my old ID and I can not figure out how to update it

I updated my Apple ID but my I Cloud account still has my old ID and I can not figure out how to update it

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

HT5312 I changed my email address and apple is ok wih it but iCloud still has my old email address and is not recognising either my original password or my new password. How can I get my iCloud account email address corrected and also get my new password

Hi
I changed email addresses but iCloud sill has my previous address registered. It also is not recognising either my original password or my new password. How can I get my new email address into the iCloud system, and also lodge a new password with them?
I'm using an ipad and all else is ok but not icloud.

Welcome to the Apple community Ross.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

HT5616 how do i change my apple id on my iphone. I have changed it on my account but the phone still has the old id and therefore will not allow me to doadload any apps

How do I change my Apple ID on my iphone? I had to change my email address but haven't been able to successfully on the my phone and not it will not allow me to download apps because the id is the old one

settings - app/itune store - apple id - log out and log back in with your new id.
NOTE: apps are tied to the apple id that was used to purchase it.

SAP GUI Java 7.10 rev 5: Copy cells content from ALV does not work (OSX)

Hi all,
I'm trying rev 5 for OSX. ALV aesthetics is really great but: copy cells content is not possible anymore.
Nothing happens with command+C.
I cannot copy anymore just a part of the cell content.
Trying all possible key combinations, something is copied with Ctrl+C. When I paste it, the pasted content is something like this:
(0100),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (0000012338),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1)
where "0000012338" is the content I wanted to copy.
Any suggestion?
Thanks,
Lorenzo

Hello Lorenzo,
thanks for the feedback. We are working on it and if all goes well, a solution will be provided with 7.10 rev 6.
Best regards
Rolf-Martin

Error messages Sap gui 7.1 pl 6 and 7 + guixt

Hello,
We have a problem with SAP GUI 7.10 PL 6 and 7 in combination with GUIXT 2008-Q2-1. When the user is starting a transaction that is combined with GUIXT, they are getting mostly three error messages:
Message 1:
"Not enough memory - please increase virtual memory (get memory:length=25728 file=C:\Source\grilb\..\grlib\smtable.cpp line=13)"
Message 2:
"Not enough memory for internal table (table name=cntl occu=32 leng=804)"
Message 3:
"PRD: maximum work process hold time execeeded"
The problems occur since patch level 6. We tried somes solutions:
Solution 1:
Install the newest version of GUIXT, no results.
Solution 2:
Upgrade SAP GUI with patch level 7, no results.
Solution 3:
Uninstall SAP GUI 7.1 PL 7 and reinstall an older version of SAP GUI 7.1 PL3, the problem is solved.
Can someone tell me what these error messages mean and if there has been a bug in SAP GUI 7.10 patch level 6 and 7?
Thanks,
Alex

Hi Matthew,
I do not know whether A. De Cesare and Steve Wojnicki still see this issue in their installations. In my comment above I suggested to use a higher SAP GUI patch level (PL8 or above).
We (Synactive) could not yet find out what is causing this problem; a couple of installations reported it in the past. What we found out is that
- the error occurs with SAP GUI 7.10 PL6 and PL7, but never occured in earlier patch levels or in later patch levels
- it occurs on certain PCs only, but we do not know what differentiates those PCs from others that run the same application+scripts without problems
Gerhard

NWBC Side Panel and SAP GUI Scripting

Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Some of our users are getting pop up messages that say "The scripting support is not installed"... interestingly they don't actually appear to be opening a side panel when they get this message.
I noticed that these users don't actually have SAP GUI scripting installed at all, so not that it is just not enabled, it is not installed in these cases. So does the above section from the help documentation mean that SAP GUI scripting must be installed on the client PC but it does not actually have to be enabled?
That's how I am currently reading it... but perhaps someone can clarify for me, or someone else has had a similar experience.
Thanks,
Simon

Hi Simon,
As written in the documentation you quoted:
Simon Kemp wrote:
Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Meaning: SAP GUI Scripting need to be installed on the client PC, although it is not required to activate it:
Regards,
Claudia

SAP GUI for JAVA - Search Help ALV display

I need to be able to display search helps in the ALV grid format or the ' Dialog Modal ' option as seen on the <b>Settings for all F4 helps</b> tab under the personalize option for search helps.
Currently when I am using a Macintosh machine the system ignores the system setting and my personal settings and displays all search results in an ABAP List format. Unfortunately the ABAP list format does not work correctly when used to input a field on another ABAP list report.
This behaviour can be found on the Mozilla Firefox browser when SAP GUI for HTML and the SAP GUI for JAVA.
Your help will be greatly appreciated.

Hi Rolf-Martin,
Thank you for your detailed explanation on how the ALV grid control is implemented for the SAP GUI for Java. This has been pretty insightful. The good news is that I finally figured out a solution to my problem. You see I inherited an old custom program where an ABAP list is used as an interactive data capture screen with input fields. Well a couple of fields had search helps. The program has worked fine with the regular SAP GUI until a MAC OS user tried to use it with the SAP GUI for Java. Whenever they selected a line from the search help it would bring back the entire onto their input screen.
A sample of the code:
form search_help.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            TABNAME     = 'EKPO'
            FIELDNAME   = 'MATNR'
            SEARCHHELP                = 'ZMAT1_A'
            SHLPPARAM                 = 'MATNR'
       TABLES
            RETURN_TAB       = RET_TABLE.
IF NOT RET_TABLE-FIELDVAL IS INITIAL.
   LINXX-XMATNR = RET_TABLE-FIELDVAL.
   MODIFY CURRENT LINE FIELD VALUE XMATNR FROM LINXX-XMATNR. " ****
ENDIF.
SET CURSOR 9 SY-CUROW.   " ********
endform.
The problem was being caused by the fact that the search help ABAP list was overriding the sy-XXXX values for the current line contents, index, pageno, cursor row for the calling ABAP list. So when a user selected a row from the search help this would now become the current context and be transferred back to the calling program.
The fix was pretty simple; all I had to do was save the current line context and the context prior to calling the search help. After the search help was run I would then replace the current line with the saved one in my local variable. I hope this makes sense. We now have a couple of happy MAC OS users.
Once again I thank you for your patience and support in this matter.
Have a great day,
Edwin.

Interactive SAP GUI Application - Publish-Subscribe Model

Customers want to pay for such interactive applications: SAP GUI subscribes to external events, provides visual feedback for these events, and popups other screens related to events. And all this without user action (almost:).
From my preliminary investigations, SAP implements https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/04291088-0901-0010-ebab-ccfd2c848355">web [original link is broken] [original link is broken] but this is a reference to the standards only without any clues how this is related to SAP GUI applications. What techniques has been really and successfully used?
Sharing your experience writing interactive application will be greatly appreciated.

You can deploy both Applications and Packages using the Application Catalog.
Just make sure to target a user collection.
Deploy to users as "Avaliable" and it will show up in the Application Catalog.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

'Idoc has wrong status'

Hi SDN,
Good morning to all of you. I came infrom of you with a small quaery related to IDOC. My query is sales order is going to be created via IDOCs (Which came from XI) through FM IDOC_INPUT_ORDERS. While creating the SO we are generating the mails to users if any errors will be encountered, but here every thing is working fine and some times it is generating mail with the message 'Idoc has wrong status' for successful also. Not for all only for few sucessfull SO's it is generating mail. Please suggest me any configuration i need to check or any thing else. Please suggest me....Appriciate your valuable suggestions......Waiting for your valuable reposnse.....
Regards,
Kumar

Hi Santosh,
Thanks for your immediate response. It is giving me status 53.
Regards,
Kumar

BW Bex Browser in SAP GUI for JAVA 6.40 R2.2 for Linux Desktops

Hello,
I am using SAP GUI for JAVA v 6.40 R2.2 on a Linux desktop. But during the installation it doesn't ask for BW Bex installation option (as in SAP GUI for Windows). Is it the case that BW Bex is not supported in Linux Environment? If it is then kindly suggest some way to install the same.
Regards,
Yashodhan

Hi Yashodhan,
the Business Explorer does not exist in the Linux environment.
Best regards,
Christian

HT2204 I have changed my email address which i have successfully done on my laptop, however when I connect my iphone it still has my old email address and of will not acceprt either my old password or new password.Do I have to unistall itunes and reinstal

I have changed my email address which I sucesfully did on my laptop,however when I connect my iphone it still has my old email address and will not accept either my old or new password.Do I have to uninstall and reinstall again.Please help.Any suggestions.Regards Mark

Settings > Store > Sign out.
Sign in with the new credentials.

SAP GUI 710 installation with BW 3.5 addon - BW Browser has disappeared

Dear all,
I hope someone can help with a BW 3.50 add-on problem following SAP GUI patching.
I'm doing a local installation of SAP GUI 710 Compilation 3.
I have selected the following three options:
1. SAP GUI for Windows 7.10 (Compilation 3)
2. BW 3.50 Add-On for SAP GUI 7.10
3. Business Explorer
(We require both BW add-ons for version reasons.)
Following this I have applied the SAP GUI Level 13 Patch (gui710_13-10002995.exe).
Up to this point, everything works as expected and I can still see the BW Browser at Start --> Programs --> Business Explorer --> Business Explorer (SAP BW 3.x) --> Browser (SAP BW 3.x)
However, when I apply the BW 3.50 Add-On Level 6 Patch (bw350gui710_6-10004473.exe) the Browser disappears from the menu and I can't locate it anywhere. A reboot wasn't required although I did this anyway with no visible effect.
I did try uninstalling everything and attempted the same process, but with SAP GUI Patch Level 12, and combinations with BW 3.50 Add-On Patch Level 4 but with the same result.
Has anyone else come across this issue, or know what has happened?
Thanks.

We have a similar setup, utilizing all 3 as you do.
Since we are currently at Browser patch 4, eventually headed to patch 6, I threw your situation into our VM enviroment and tested the installation of Browser patch 6. Interesting enough, a clean install of Windows XP, Office 2003, and then GUI 7.10 with patch 13 and Browser 3.5 sp4 works as normal. Once I applied SP6 for the Browser, I still have the icon under the Start menu but the wdbbapp.exe is gone.
Thanks to the VM test enviroment, I was able to recreate the scenario in a few moments and this time prior to installing the patch 6 for the Browser, I set it up to catch all the changes the SAP installer makes when applying sp6.
The installation performed the following activity:
13 files added
4 files deleted
141 files updated
363 registry entries added
522 registry entries deleted
129 registry entries updated
Of the 4 files deleted, one of them is the BEx Browser (wdbbapp.exe) - which is why my shortcut won't work
Of the 13 added, none of them are the file being replaced.
Of the 141 modified, none are this file either.
I am still going through the log but have not seen anywhere it will make a difference if the file is not there.
Again, I am not saying there is a problem, perhaps they changed the way it is accessed, I am not fully up on the process of the BEx Browser. SAP may have something mentioned about it on their GUI/BEx site or a note, this is just my preliminary findings.
Regards,
Zecher

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

I have same question

SAP GUI 7.20 PL6 still has wrong input cursor position on Win7 note:1563650

Similar Messages

Maybe you are looking for