SAP GUI and Win 7 error when attaching a document

I searched Google multiple times for an answer but didn't find one, so I'd like to bring it up in this forum.
I start by saying that mine is a large corporation with centralized application, Windows and security configuration, so I have very little manuvering as far as changing settings.
The problem we run into is as follows:
some users who use a particular (Quality Assurance) module of SAP need to regularly attach documents (typically PDF format) in SAP. The typical size of an attachment is between 3-7 MB.
Those documents are store on a network file share remote to the site. The network latency between the site and the file share location is approx. 6ms (not huge by any means). Users are running Win 7 Enterprise SP1.
Randomly, the attachment download fails in SAP and they have to exit and log back in to SAP to resume. The attachment may fail2-3 times, and then succeed or fail permanently.
Copying the file to a local drive (C:) and then attaching it in SAP always works.
The users report that this was not an issue when they were using WinXP SP3 a few months back.
Again, the problem is random in that it cannot be recreated at will but happens often enough to be more than just an inconvenience.
the Windows event log logs the following message when the attach process fails and SAP freezes:
The program saplogon.exe version 7300.1.2.1080 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: a7c
Start Time: 01cf38c9a86d55ac
Termination Time: 16
Application Path: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
Report Id: 139b5ba9-a4bd-11e3-8b65-d8d3857a05c5
I'd appreciate any input that would help resolve this issue.
Steve

Besides updating the patch level, the other thing you can try to get more information is turn on or increase the level of tracing within the SAPGUI. You can do this on the workstation in SAP Logon by clicking the little button at the upper left of the window title bar, then in the drop-down choose Options. In the new window that opens go to the Traces folder and have a look through the three different kinds of traces you can turn on. Probably you should turn on SAP Logon Traces to the "Errors" level, and same for SAP GUI Traces (to Level 1: Errors), and under Session Traces pick the options that make sense to you (perhaps "Access Control", "Office Integration", and/or "Security"? You might need to experiment with different options to get the right combination that doesn't overload the trace file with noise; you may not need a Session Trace at all if the error trace on the other two options reveal what's wrong).
You can see under Session Traces what folder the trace files will go to, and open the folder from there. By default it will be C:\Users\<username>\AppData\Local\SAP\SAP GUI\Traces.
Best regards,
Matt

Similar Messages

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. Any thoughts?

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. How can I access these files?

I have exactly the same problem. The interesting thing is that the file opens when I attach it to an email and open it out of the email. I already saw the advice you provided in similar post from Aug last year and checked the security settings of the file and the folder. But according to that I have all rights.
My OS is Windows 7 Enterprise.

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word"

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme to resolve
this issue.

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

How to hide display details in sap gui and create ad-hoc request in UWL?

Hi,
how to hide display "details in sap gui" and "create ad-hoc request" in UWL?
Please telme the step-by-step procedure to hide "details in sap gui" and "create ad-hoc request".
Thanks,
Rashmi

Hi,
Thanks for the information. It was very helpfull.
Can you please tellme where can we fine UWL iView? I tried to find this out in two ways.
1) Portal Content -> Content Provided by SAP -> End User Content -> Standard Portal Users -> Views -> com.sap.coll.iviews -> Universal Worklist (finally i got this iView). Here i dint find any property called "List of UWL Actions to exclude". In the link which you had given, its written that we can modify the iView and add the name of the actions under the Actions to exclude from the UWL property.
Which iView do we need to modify and where can i find that property?
2) I downloaded the xml file and then tried to find this property "List of UWL Actions to exclude" or " Actions to exclude from the UW". But i couldnt find both the properties in xml file.
Thanks,
Rashmi

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

Error when open fdf document from Safari

Reproduced on
* Adobe reader 9.1.0
* Acrobat Pro 8.1.3
NOT reproduced with Acrobat Pro 8.0.0( withou updates )
have simple fdf document for example in root of disk c:
=============
%FDF-1.2
1 0 obj
<<
/FDF
<<
/F (1.pdf)
/JavaScript
<<
/After 2 0 R
>>
>>
>>
endobj
2 0 obj
<<
>>
stream
endstream
endobj
trailer
<<
/Root 1 0 R
>>
%%EOF
================
when open it with IE or FF, al works fine. but when try to open in safari messagebox shown
"There was an error when open this document. This file cannot be found."

minified version of not worked fdf
%FDF-1.2
1 0 obj
<<
/FDF <</F (pdf.pdf) >>
>>
endobj
trailer
<<
/Root 1 0 R
>>
%%EOF

Error when attaching checklist reference to cProject structure

Hi,
I have created a checklist template for cProjects. When attaching the checklist reference to a cProject project I am able to select the checklist, but when pressing the continue button, I get an error message:
The following error text was processed in the system: Invalid parameters were transferred when calling.
The termination type was: RABAX_STATE
When checking the runtime error in ST22 the Exeption is CX_DPR_FATAL_ERROR.
The ABAP call stack was:
Method: CHECK_TEMPLATE_FOR_REFERENCING of program CL_DPR_CHECKLIST_T============CP
Method: DO_ACTION_SET_REF_CHECKLIST of program CL_DPR_API_CHECKLIST_R========CP
Method: DO_ACTION of program CL_DPR_API_CHECKLIST_R========CP
Method: IF_DPR_PROVIDER_ACTION~DO_ACTION of program CL_DPR_API_APPLICATION_OBJECT=CP
Method: DO_ACTION of program CL_DPR_API_BUSINESS_OBJECT====CP
Method: IF_DPR_PROVIDER_ACTION~DO_ACTION of program CL_DPR_API_BUSINESS_OBJECT====CP
Method: IF_DPR_CORE_SERVICE_PROVIDER~DO_ACTION of program CL_DPR_API_CPROJECTS_CSP======CP
Method: IF_DPR_CORE_SERVICE_ACCESSOR~DO_ACTION of program CL_DPR_API_CORE_SERVICE_MNGR==CP
Method: REPORT_ACTIONS of program CL_DPR_UI_CHANGE_MANAGER======CP
Method: REPORT_ACTION of program CL_DPR_UI_LOG_DETAIL==========CP
What could cause this problem? I have checked the SAP notes related to this. There seem to be some problems with summary tasks (note 1014441) and roles (notes 1023248, 878905), but my error messages seem to be different.
Iu2019m using SAP RPM 4.5 (CPR xRPM 450_700: Support package 0009)
Any help appreciated

Did you replicate the datasource ?

Problem with Interaction between SAP GUI and BSP Applications

Hi Folks,
I am new to BSP and am trying to create a program to created a BSP within the SAP GUI. This is my program, I have tried to find as to what error have I made but I am not able to find out.
I can only find a button post document in the output, but I am not able to trigger any event. Please let me know as to what is the error.

REPORT zbsp_iact_gui.
SET SCREEN 100.
*       CLASS cl_my_html_yiewer DEFINITION
CLASS cl_my_html_viewer DEFINITION INHERITING FROM cl_gui_html_viewer.
PUBLIC SECTION.
    METHODS: constructor IMPORTING parent TYPE REF TO cl_gui_container.
    METHODS: on_sapevent FOR EVENT sapevent OF cl_gui_html_viewer IMPORTING action postdata.
ENDCLASS.                    "cl_my_html_viewer DEFINITION
*       CLASS cl_my_html_viewer IMPLEMENTATION
CLASS cl_my_html_viewer IMPLEMENTATION.
METHOD constructor.
    super->constructor( parent = parent ).
    DATA: event_tab TYPE cntl_simple_events,
          event TYPE cntl_simple_event.
    event-eventid = me->m_id_sapevent.
    event-appl_event = 'X'.
    APPEND event TO event_tab.
    call method html_control->set_registered_events
        exporting
           events = event_tab.
    SET HANDLER me->on_sapevent FOR me.
ENDMETHOD.                    "constructor
METHOD on_sapevent.
    BREAK-POINT.
    IF action CS 'COUNTER'.
      DATA: counter TYPE string.
      READ TABLE postdata INDEX 1 INTO counter.
      SPLIT counter AT '=' INTO counter counter.
      MESSAGE counter TYPE 'I'.
    ENDIF .
ENDMETHOD.                    "on_sapevent
ENDCLASS.                    "cl_my_html_viewer IMPLEMENTATION
DATA: html_viewer TYPE REF TO cl_my_html_viewer,
      html_container TYPE REF TO cl_gui_custom_container,
      fcode LIKE sy-ucomm.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'TESTHTM1'.
IF html_viewer IS INITIAL.
    CREATE OBJECT html_container
      EXPORTING
        container_name = 'HTML'.
    CREATE OBJECT html_viewer
      EXPORTING
        parent = html_container.
    DATA: url TYPE string, urlc(2048) TYPE c.
    cl_bsp_runtime=>construct_bsp_url(
    EXPORTING in_application = 'ZBSP_IACT_GUI'
    in_page = 'Start.htm'
    IMPORTING out_abs_url = url ).
    urlc = url. " type conversion STRING to C
    CONCATENATE urlc '?SAP-CLIENT=650' INTO urlc.
    html_viewer->show_url( url = urlc ).
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE fcode.
    WHEN OTHERS.
      CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Edited by: Nonconformist Pagal on May 12, 2009 1:42 PM
Edited for formatting by: Durairaj Athavan Raja on May 14, 2009 9:50 AM

Error when attaching workflows to Sharepoint 2010 lists

Hi,
I am getting an error when trying to attach an approval workflow to any SharePoint 2010 list on my development server. From the below error in the log I remember that I got this
same error in Sharepoint 2007 MOSS. It occurs because I have underscores in the server name. I know that I can get around this by either changing the server name or using alternative access mappings to access the server without the underscores. Does anyone
know of a way to fix this so that the srever name can have underscores which I believe are viable characters in a server name.
System.ArgumentNullException: Value cannot be null. Parameter name: g at System.Guid..ctor(String g) at Microsoft.Office.Workflow.WrkAssocPage.AssociationOnLoad(EventArgs
ea) at Microsoft.Office.Workflow.CstWrkflIPPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) b06aa203-3cbe-4180-806a-4ed994fbbee9

I think you are referring to the following KB about special characters.
http://support.microsoft.com/kb/905231
This is not the reason we are experiencing the workflow problem though. It is related to Internet Explorer security which changed.
Issues after you install updates to Internet Explorer or Windows
http://support.microsoft.com/kb/325192
"Cookies on ASP pages are blocked if the server name contains characters that are not supported by Domain Name System (DNS). For example, you cannot use underscore characters (_) in the server name. This behavior is by design."
Resolutions include:
Removing underscore from server name
Use Alternate Access Mappings
Extend and map using a web application that uses a URL path that does not use the servername
Decrease the security level in IE on the Security tab (not recommended)
Uncomment a line in the web.config which is commented by default (not recommended)
<add name="Session" type="System.Web.SessionState.SessionStateModule" />
Hope this makes the issue more clear. I have updated the SharePoint KB to point to the Internet Explorer KB so people will be aware that the IE change does affect SharePoint behavior. This is not a SharePoint issue however.
Fred Ellis - MSFT

Sap mii JRA proxy error when calling a BAPI

Hi everyone,
I am trying to connect SAP Netweaver (MII JAVA Stack only) to ECC via JRA. Everything was right (deployment and configuration) but when developers try to call a BAPI the following error appears:
JRAProxy error. Entry not found.
Could you please help on that.
Thanks in advance.

Hi Herman
I am also facing same issue if you have resolved above issue please reply me regarding same.
Regards,
Manoj Bilthare

SAP GUI 602 logon error

Dear Experts:
we are having SAP GUI logon problem as follow:
SAP GUI 620
partner not reached (host prd.uaes.com, service sapdp03)
time     Wed Nov 26 15:56:03 2008
componet   NI (Network interface)
Release     620
version 36
Module ninti.c
Line 881
Method    NiPConnect
Return Code -10
System Call connect
Error No 10055
Error Text WSAENOBUFS: No buffer space available
Counter 1
does anybody have idea about above error?
thank you.
regards, Mao

Hello Sergo Beradze,
yes. the SAP system in prd.uaes.com host is 32bit server. we install SAP R3 4.6c sr2 version with it.
most of time the SAP PC user can connect to SAP smoothly. but sometimes some part of sap users will get the above error message which I have posted.
regards, Mao

SAP GUI and Java reqs

I am putting together some documentation for the Java requirements for SAP applications on RHEL5 for customers.
Can someone sanity check this for me please?
The SAP GUI requires at least Java 1.5 to run, so a customer should install the Java 1.6.0_16 version from Sun.
1.Download the Sun JRE from http://www.java.com/en/download/manual.jsp.
2.Install the Sun JRE.
3.Set the PATH variable so that the Sun JRE is the default version of Java. You can verify this with the java u2013version command.
4.Install PlatinGUILNX_9.JAR from SAP to install the SAP GUI.
The SAP engine on the other hand requires version 1.42 JDK. Moreover, the only JDK supported for 64-bit Linux is the IBM version.
1. RHEL 5.4 and newer ships with the right IBM JDK so install the IBM JDK. By default, it will install in /opt, so we show the path for the IBM JDK as /opt/IBMJava2‑amd64‑142 in our instructions.
2.SAP NetWeaver 7.0 requires strong encryption. You need to obtain and install the Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files for the IBM JDK you are using beforehand starting the installation. Register to download the JCE files at https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk and download the ZIP file from https://www14.software.ibm.com/webapp/iwm/web/reg/pick.do?source=jcesdk&lang=en_US.
2.The file you download is named unrestricted.zip. Copy the file named unrestricted.zip to /opt/IBMJava2‑amd64‑142/jre/lib/security directory.
Do not unzip the file. Instead, copy the archive.

Hi,
That's a good documentation, but what do you mean with
4.Install PlatinGUILNX_9.JAR from SAP to install the SAP GUI.
You should post where to download that file, some days ago I downloaded a new version of SAPGui for Java ( 720 ), I don't know what version of SAPGui for Java is PlatinGUILNX_9 or where can I download that version, I downloaded my SAPGui for Java from:
ftp://ftp.sap.com/pub/sapgui/java/
You can see different versions and releases... 720.

[adobe 11.0.09 | windows XP] error when open pdf document and persistent error message even if adobe is closed

Hi
I encounter a problem on a windows XP laptop using acrobat 11.0.09.
When i try to open a .pdf document i get an windows error message.
The document open well else, but i get persistent windows error message then, and i get them even if i close this document.
When i look application event i have this :
Nom de l’application défaillante acrord32.exe, version : 11.0.9.29, horodatage : 0xsyntpfcs.dll
Nom du module défaillant : 7.5.19.5, version : 00001599, horodatage : "a long string"
Code d’exception : 0x%7
Décalage d’erreur : 0x%8
ID du processus défaillant : 0x%9
Heure de début de l’application défaillante : 0x%10
Chemin d’accès de l’application défaillante : %11
Chemin d’accès du module défaillant: %12
ID de rapport : %13
I try to uninstall / reinstall acrobat without change, this error message still stay when i open a pdf document.
cordialy

Hi ,
I solve my problem :
1- chkdsk /f to test the disk => nothing particular
2- I use defraggler to defrag the harddrive ( was very fragmented)
I thing this two step doesn't change anything.
3- then i use Adobe Reader Acrobat Cleaner Tool and restart laptop
4- Reinstall Adobe Reader.
5- I just let reader11.0 folder in c:\program files\Adobe and delete other old reader folder.
6- did same in c:\documents and settings\%username%\application data\adobe\acrobat\
seems to work know
will survey to be sure and back to confirm
thank

Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.

Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit

Html snippets and unknown error when publishing - the mystery deepens

Can anyone make sense of this?
I have been using iWeb for a year or so. Personal site with added extra goodies like widgets using iweb more.
Upgraded to iWeb 08 with a few formatting problems (which I chose to ignore for now) - after version 2.01 I replaced my iweb more extras with the new html snippet thingy and everything was fine - although I still didn't get around to sorting the formatting issues.
Now we are at 2.02 I decided to use one of the new themes and so I created a new page using golden rod and merrily cut and paste from the existing page. I was loathe to delete the old page until I knew the new one was fine - my plan was then to do a bit of page renaming and voila a newly themed home page. Anyway what I got was;
Unknown error - when the new page was being created.
Ok - deleted the offending page - site now publishes fine -so we know this isn't .mac.
Now I decided to build the new page a bit at a time to see what was causing the problem.
It turns out to be a html snippet (which works fine on my home page still);
div style="text-align:center"
a href="http://outcampaign.org/"
img border="0" alt="image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122"/
/a
(I have broken the tags by removing the 's so you can see the text itself)
When I added this to an HTML snippet the unknown error returned.
Now I have deleted it and I still get the unknown error for that page.
So this is definitely an iWeb problem and not a .mac problem.
Any ideas?
Home page;
http://web.mac.com/theedonfamily/Site/Home.html

why do you use the snippet to actually add the thing? you can just place the image directly into iweb and then activate it as a link. (there are some errors in the script as well!)
if you want to use the snippet way, then id just change the code a bit:
+⊗p style="text-align: center;"⊗+
+⊗a href="http://outcampaign.org/"⊗+
+⊗img style="border: none;" alt="Image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122" /⊗+
⊗/a⊗
⊗/p⊗
replace every ⊗ with either < or >.
max

SAP GUI and Win 7 error when attaching a document

Similar Messages

Maybe you are looking for