SAP GUI call from Web Dynpro Abap

Hi all,
I heard about the possibility to call the SAP GUI directly from my Web Dynpro Abap Application, so that the GUI is integrated in my web browser. But i could not find any information about that.
Maybe you can help me.
Thanks,
Johannes

Hi Johannes,
Its not possible to directly call your R/3 GUI from your WDA. You can try the "Screen Design Time Conversion" tool in SAP. You can go through this [link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/frameset.htm] for further details regarding it.
But please also pay heed to Thomas's advise in [here|Is there a converter for classic dynpros?;.
Regards,
Uday

Similar Messages

SAP GUI screens in Web dynpro ABAP

Is there an easy way to convert SAPU GUI screns like VA01 into webdynpro screens like the old way of doing with ITS?
I don't want to use the SAP portal. I just want to use Webdynpro ABAP only. Please share your thoughts.
Thanks

ITS is the only tool with automatic translation of SAPGUI screens. Even if we autoconverted to Web Dynpro, you would end up with a Web Dynpro Screen that pretty much looks and feels like the old SAPGUI screen. There is a screen conversion wizard in Web Dynpro, but it isn't really recommended. It only does partial conversion, the screen designs aren't optimal (hence the WDA that looks like a dynpro) and the code of the component is messy. You really need to redesign from scratch to take advantage of the features of Web Dynpro.

Calling adobe form from Web Dynpro ABAP

Hi Friends,
This is the following error, which i got when i tested my application. Calling adobe form from Web Dynpro ABAP.
WebDynpro Exception: ADS: Request start time: Tue Nov 16 14:00:22 YEKT
2010(200,101).
Can some one tell me how to solve this....
Regards
Sankar

Hi,
Please refer to this same link in forum
WebDynpro Exception: ADS: Request start time, start Interactive Form
WebDynpro Exception: ADS: Request start time
Thanks
Pradeep

Call SAP GUI actions from Web UI

We have upgraded our CRM system from 4.0 to 7.0. In CRM 4.0 we have some complex actions used in service order. We would really like to be able to reuse those SAP GUI actions from Web UI service order since it would require a lot of work to rewrite them in BSP.. Is it possible to call a SAP GUI action from Web UI? How do we do this?
Regards Andreas
Edited by: Andreas on Jan 17, 2011 1:58 PM

That was very helpful information. I can now see the available actions. The problem now is that one of the SAP GUI actions is using dialog program technique, like CALL SCREEN 9001... Is there a way to handle this also from Web UI or is it impossible?
Thanks and regards
Andreas

Portal dynamic iView from Web Dynpro ABAP?

I wish to use a "Dynamic iView" from a Web Dynpro ABAP application, but it appears the API is only available in Web Dynpro Java. Can this feature be used from Web Dynpro ABAP, or can this be accomplished in another way?
Scenario: I have two iViews on a page, one Web Dynpro ABAP and another iView whose source I want to change dynamically based on something a user clicks in the Web Dynpro ABAP.
Dynamic iView:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/a72c155df77038e10000000a422035/frameset.htm

So you are suggesting the WDA fires an event to a new WDJ that we would need to create that would in turn use the Dynamic iView service mentioned in that help document?

How to call an web dynpro abap application with an particular theme

Dear friends,
i have created one web dynpro abap application. i created one theme XYZ in portal with required font size. when i applied this theme on portal all web dynpro application use this theme.
i want to use current theme for one application not for all.
is it poosible to call an web dynpro abap appl with the particular theme where as others should not be temper with this theme.
please guide me by some useful steps.
regards
sunil

Sunil,
Check if this helps.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7015b1f9-535c-2910-c8b7-e681fe75aaf8?QuickLink=index&overridelayout=true
Cheers!
Sandeep Tudumu

Pass Parameters to an external appl when launched from web dynpro ABAP .

I want to Pass Paramaters to an external application when launced from Web dynpro ABAP . I have successfully launched an .exe file ( Notepad / eViewHSEditor ) from Web dynpro using the logic from Standard WD_TEST_APPL_ACFEXECUTE component But I am unable to Pass paramters to the .exe file .
example :- I would like to pass parameters text1 text2 in the arugement list and I expect it opens an untitled notepad and in the file it will have parameters text1 text2 . But it is behaving in a different way . Below are the detailed steps of what I have done .
The steps that I followed :-
1) Right now I have created the white list Configuration for Notepad.exe
2) I have created 1 and 2 postions both of type string and permission Legal .
3) The Paramter Value is * for both 1 and 2 .
4) I activated the whitelist and it generated an .XML file
5)
          application = 'C:
WINDOWS
system32
notepad.exe'.
          argument = 'text1 text2' .
          co_element :- I am reading the element from the conrtext .
      co_element = wd_context->get_lead_selection( ).
      co_element_stru-attribute_name = 'ERROR'.
      co_element_stru-element = co_element.
      wd_this->acf_method_handler->if_wd_acfexecute~execute( application = application
                                                             argumentlist = argument
                                                             errorinformation = co_element_stru ).
when i execute the application , it is trying to launch a notepad with file 'text1 text2.txt' and it doesn't have one , it is asking do you want to create . If You yes, it will open notepad with name 'text1 text2.txt' . If you Pass abcd in the arugement list , if the file with name abcd.txt exists , it opens the notepad with that file name .

You try to open notepad from your PC with the same command, you will the same result.
start->run->notepad "test1 test2". You get the popup saying that "test1 test2" file is not existing. You can google it to find a way to pass the text while opening notepad and try to fit that in your WebDynpro argument. I doubt if it is possible though.

How to View Smartforms or SAP Script Forms in Web Dynpro ABAP

Do anyone have idea of how to View Smartforms or SAP Script Forms in Web Dynpro ABAP?
Please let me know. Thanks

Hi Sameeksha,
You can display an smartform in WDA as an pdf file. Try go through this [article |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785]where Nanda does explain about the same.
Regards,
Uday

How can I call a java object from Web dynpro ABAP application?

I made Web dynpro ABAP application and posted it to SAP EP.
For certain business purpose, we need to call external 3rd party java object using 3rd party's java api in Web dynpro application.
Is there anybody who experienced this kind of java interface issue?
I know Web dynpro Java environment can fully support this kind of requirement. but regarding Web dynpro ABAP, I couldn't find any clue for this.
Any comment or suggestion would be greatly appreciated.
Thanks,
Raymond, ABAP Consultant

if you have jco configured, then you can make calls to java api from ABAP .
check out this weblog.
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Raja

Adobe Reader error with SAP interactive form in Web dynpro ABAP

Hi,
We are having a strange intermittent problem with Adobe Reader. When we try to open PDF files from SAP Frontend we get an error pop-up. The pop-up does not have any text. The title of the pop-up has "Adobe Reader". There is a blue question mark and an OK button. The form is inserted into Web Dynpro ABAP page. This web dynpro application is executed in SAP GUI by this program:
REPORT TEST1 MESSAGE-ID SWDP_RUNTIME.
start-of-selection.
CALL FUNCTION 'WDY_EXECUTE_IN_PLACE'
    EXPORTING
     PROTOCOL               = 'HTTPS'       " HTTP | HTTPS
    INTERNALMODE           = 'X'    "SPACE - browser is started
    PARAMETERS             =
      APPLICATION            = 'Z_FORM'
     CONTAINER_NAME         = 'TEST'
    EXCEPTIONS
      INVALID_APPLICATION    = 1
      BROWSER_NOT_STARTED    = 2
      OTHERS                 = 3.
IF sy-subrc EQ 1.
    MESSAGE a400.
ELSEIF sy-subrc = 2.
    MESSAGE a401.
ELSEIF sy-subrc = 3.
    MESSAGE a667.
ENDIF.
Adobe Reader version is 9.1.2
Is there any solution for this?
Many thanks for answer.

Jiri,
The reason why I thought downgrading would help is because Reader 9 and above is probably not fully supported by SAP yet.
You can maybe open an OSS and see if Adobe 9 is fully supported or not.
Chintan

Adding attachments to workflow from Web Dynpro ABAP Application program.

Hi,
workflow is supposed to start by a Web Dynpro ABAP Application.
The user can attach files to it.
A superior is supposed to review the files and either approve or reject the request.
I tried the following in Web Ddynpro ABAP:
CALL FUNCTION 'EWW_WORKFLOW_START'
EXPORTING
X_TASK = 'WS90000074'
IMPORTING
Y_WORKFLOW_ID = lv_WF_ID
TABLES
X_CONTAINER = lv_IT_CONTAINER
EXCEPTIONS
then followed by:
CALL FUNCTION 'SAP_WAPI_ATTACHMENT_ADD'
EXPORTING
WORKITEM_ID = lv_wf_id
ATT_HEADER = lv_swr_att_header
ATT_BIN = Item_FILENAMEATTACHED
DOCUMENT_OWNER = SY-UNAME
LANGUAGE = SY-LANGU
IMPORTING
ATT_ID = lv_swr_att_id
The Workflow has only one user decision step and one notification Step.
In the user decision step, there is a binding from ATTACHOBJECTS to the task.
But, in the log, you can see the attachment in the Workflow Container of the workflow instance, but you don't see it in the task (neither Inbox nor UWL)
I have checked the binding it is correct. I am getting the attachment in workflow container in '_attach_objects' element. but this attachment has to go to the user decision step, so I am binding the '_attach_objects' of workflow container to '_attach_objects' of user decision step. But the attachment was not going to user decision step.
Could you please let me know where am i doing wrong?
Thanks,
V.Nagaraju

@Ruslim Chang
Sorry to point out but the FM will return the Workitem ID only so there is no problem with the LV_WF_ID variable.
@vundralla nagaraju
Instead of making binding between attachobjects make binding between
WiGroup_ID <---- attachobjects
and then on the next step you try to make biniding in the user decision step by using WiGroup_ID.I think it should work.

How to open print dialog from web dynpro abap application

Hi experts,
I have a web dynpro application with several views and onone of the view there is a button that should open print dialog with printers list and all other options (standard print dialog we see in windows). I did reserach on SDN and came to now that this is a limitation of web dynpro abap. I did find some code also but unfortunately our current version of ABAP(7.0) do not support the code I found. I am not able to find any proper solution for this. Could someone please let me know how I can open a print dialog by clicking on a button in web dynpro abap? Any sample code or any information would be greatky appreciated.
Thanks.
Mithun

Hi Mithun,
Have you check this?
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/f8/872806981d4411b5ce51a00207ed31/content.htm
and also go through..
How to print in a web dynpro application
Print button
Cheers,
Kris.

How to call t-code from web dynpro ABAP application

Dear Gurus,
I am new to ABAP web dynpros. I have to add a button and have to call a SAP standard t-code if user clicks on this button? How to accomplish this task? Any help or example would be appreciated.
Thanks,
GSM

Hi GSM,
You have to create a SAP transaction iView in your Portal, then obtain its URL in your webdynpro and call WDPortalNavigation.absolute() method.
Below are the same steps in more detail:
1) Create a SAP Transaction iView or an Internet Application Component iView (whichever you find convenient). While creating you can select whether you want to use SAP GUI for windows or SAP GUI for HTML. For the latter(GUI for HTML) ensure that your ITS is working fine and configured while creating the system in EP.
2) Open the properties of the SAP transaction iView created. In the OK code field you can give the ok code value just as you give in SAP R/3 in case you want to navigate to the second screen of SAP R/3 when you pass values from WebDynpro.
Example for the above would be say Transaction "VA03" for displaying Sales order. Suppose from Webdynpro i want to pass a parameter called "Order number" and when i click a button it should pass the order number to R/3 and skip the first screen required for inputting the sales order numbe.
It should directly go to the main display of sales order for that ordernumber.
3) Create your WebDynpro component and deploy it on the server. In your WebDynpro use the WDPortalNavigation.absolute() method and give the url of the SAP Transaction iView created as a parameter and also the required parameters that you would like to pass from WebDynpro.
4) Create a SAP WebDynpro iView in the Portal.
5) Now run the Component. It should open up your SAP Transaction iview.
Regards,
Uday

Unable to perform Calculations on Excel exported from Web Dynpro ABAP

Hi Gurus,
I have a custom functionality "Export to Excel" internal table data on my web dynpro application. I dint go with standard ALV feature because it doesnot give flexibility to add colours to excel sheet and add multiple tabs and so i had to write XML ABAP coding in the web dynpro application to achieve this. While passing the internal table data into cells, i created cells with string data type and hence all the fields in the excel are now in char type. Users are unable to perform any calculations because of this issue, i tried to format the cells but it doesnot work. Please help me.
Regards,
Pravs.

Hi,
Just do the following in excel before downloading and check whether it works.
Tools->Options->International tab.
In that mention decimal separator as ,(comma).
Thousand separator as .(dot).
Uncheck use system separators.

Problem in response of a webservice when called from web dynpro

My web dynpro application is communiting with XI using a webservice..
its working fine and giving me a PAYLOAD in response as give below
SyncId>911</SyncId>
<SyncInstanceId>910</SyncInstanceId>
<SourceSystem xsi:type="ns1:/wsdl:definitions/wsdl:types/xsd:schema/xsd:complexType/xsd:sequence/xsd:element[4]/xsd:simpleType">EI6400</SourceSystem>
<Direction>1</Direction>
<ResourceMaster>false</ResourceMaster>
</ns1:InspireCancelRequest>
here xsd:type of SourceSystem is string.. and for others it is integer and boolean..
i dont want <SourceSystem xsi:type="ns1:/wsdl:definitions/wsdl:types/xsd:schema/xsd:complexType/xsd:sequence/xsd:element[4]/xsd:simpleType">EI6400</SourceSystem>
this information into payload..
why this is happening only about string type? and not for others..

Hi Snehal,
u can check here ,if it help
<a href="/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1:///people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
<a href="/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2:///people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
regards
Sumit

SAP GUI call from Web Dynpro Abap

Similar Messages

Maybe you are looking for