SAP GUI cannot start browser (Unable to start HTML browser) ?

Hi,
Please advise me what i need to do, because suddenly i can't call the browser from SAP GUI,
like transaction SXMB_IFR, CHECKSLD etc.
Thank you and Best Regards
Fernand

check if host file entry has been maintained
An entry into the host file is needed specifying the server details.
The host file is usually found under the path C:WINNTsystem32driversetc or C:WINDOWSsystem32driversetc. This file contains the mappings of IP addresses to host names
For more,
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]

Similar Messages

SAP Server Cannot Start - Cannot login to server

Hi gurus, I was doing patching for ABAB and BASIS then suddenly the server stops. All the work process is in Run status. I unable to connect to the server using GUI. Then instance in MMC DISP+WORK.exe changed to yellow color. It says the Running but not connected to message server.
1. I checked the Dev_Ms in the developer trace.
[Thr 4616] *** ERROR => MsSCheckConnections: no response from client C1 (BFSAP4_EC4_00) after 300 secs received [msxxserv.c 3179]
[Thr 4616] *** ERROR => MsSCheckConnections: disconnect now [192.168.0.142] [msxxserv.c 3183]
2. Then i changed a diffrent kernel version but still the same problem. I restarted the Saposcol and other services. Then i restarted the instance in MMC but still the same error message.
What should i do to resolve this problem . Please help. I need your assistance. Thank you in advance for you help.

Hi Guru, I've attached the Dev_W7.
trc file: "dev_w7", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Sep 23 15:03:00 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\EC4\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'E:\usr\sap\EC4\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'E:\usr\sap\EC4\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.211)
B New connection 0 created
M sysno 00
M sid EC4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 10456
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 10456) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Sep 23 15:03:01 2009
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F2F0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000F2F0050
M DpShMCreate: allocated wp_adm at 000000000F2F2270
M DpShMCreate: allocated tm_adm_list at 000000000F2F96D0
M DpShMCreate: allocated tm_adm at 000000000F2F9730
M DpShMCreate: allocated wp_ca_adm at 000000000F89CFB0
M DpShMCreate: allocated appc_ca_adm at 000000000F8A2DB0
M DpShMCreate: allocated comm_adm at 000000000F8A4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F92B980
M DpShMCreate: allocated gw_adm at 000000000F92BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F92BA30
M DpShMCreate: allocated wall_adm at 000000000F92BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 7 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host BFSAP4
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.211 (Make PL 0.221)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.211) MVCC support for MaxDB (note 1332203)
C (0.204) Sapinst on windows/maxdb stop with error (note 1323436)
C (0.202) NUMC conversion corrected (note 1288313)
C (0.189) Default value for max. input variables is 2000 (note 655018)
C (0.189) Profile parameter to define max. input variables (note 655018)
C (0.188) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.188) Input parameters for SQL statements increased (note 655018)
C (0.184) Create index serial for MaxDB 7.6 (note 1267841)
C (0.184) More trace in case of packed to string conversion error (note 1262799)
C (0.182) R3trans export aborts with signal 6 (note 1262245)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 011-123-196-300
C SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Wed Sep 23 15:03:02 2009
C Attach to SAP DB : Kernel 7.7.06 Build 007-123-197-046
C Database release is SAP DB 7.7.06.007
C INFO : Database 'EC4' instance is running on 'BFSAP4'
C DB max. input host variables : 2000
C DB uses MVCC support : 0
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPEC4'
C Command info enabled
C Now I'm connected to SAP DB
C 00: BFSAP4-EC4, since=20090923150301, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20090923 150301 BFSAP4
C INFO : SAP RELEASE (DB) = 700
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,*.png

Sap upgrade --cannot start shadow instance

我在升级过程中选择了downtime-minimized，
在步骤START_SHDI_FIRST，时需要启动shadow instance，但是起不来。我尝试停止original instance后 shadow instance就能起来了。但是我看文档说如果选择了downtime-minimized，shadow instance和original instance可以并行。

Hi all
I have solved my issue :
I'm stup...id but the parameter rdisp/bufrefmode was not set correctly according to the upgrade guide.
Make sure that parameter rdisp/bufrefmode has one of the following values
in the DEFAULT.PFL profile of directory \usr\sap\<SAPSID>\sys\profile:
Value Meaning
sendon,exeauto Your SAP system (<SAPSID>) has multiple instances.
sendoff,exeauto Your SAP system (<SAPSID>) has only one instance.
Thanks to all
Yacine

I cannot start RSA1 anymore

The following error message is coming up:
Entry in inbound table already exists
Message no. E0 412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/T90CLNT090/LS//RSSEND//// (T90CLNT090 = our BW system)
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile.
Execute function
I checked TA WE20 and found that NO partner profile for the BW system (Myself connection)
Can create a partner profile for BW system:
Partner No. : T90CLNT090
Partner Type: LS
Type: US(user)
Agent: PROGRAMMER
I can save it, but if I start RSA1 the above mentioned error message is coming up again and
the partner profile in WE20 has dissapeared!

Hi,
Check below link:
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/cannot-start-rsa1-after-system-copy-846680
Thanks
Sunny

SAP GUI 730 PL8 Installation Problems

Hi all!
We are facing a problem with the following software product:
Information NwSapSetupAdmin.exe:
SAP GUI for Windows 7.30 (Compilation 3)
Component ID: 1460620d-c8bc-44c2-86ec-e632e0986b01
Version: 27625
Latest Patch Level: 8
SAP Automatic Workstation Update
Component ID: 40d11884-3906-4e67-8a96-91035ca09814
Version: 900.42
Latest Patch Level: 45 Version 9.0.45.0
Information SAP Logon:
Release: 730 Final Release
Dateiversion: 7300.3.8.1084
Build: 1478436
Patch-Level: 8
Within the SAP GUI Installation (NwSapSetup.log) the following error occurs:
16:25:13 NwSapsAtlC 1 Executing script action...
16:25:13 NwSapsAtlC 1 Script-action: Checking reboot condition.
16:25:13 NwSapsAtlC 1 Script-action: NwEngine.Context.Reboot = 1
16:25:13 NwSapsAtlC 1E Microsoft VBScript runtime error: Error message: Unknown error 0x800A01B6. Error code 0x800a01b6.
 Object doesn't support this property or method: 'NwEngine.Context.Args' (Line 4, Col. 5)
 The setup script contains the error listed above. Please contact your system administrator and provide this information, for example by sending him a screenshot of this message box (Press Alt+PrtScrn to create the screenshot and copy it to the clipboard).
16:25:13 NwSapsAtlC 1E Failed to run script:
 ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
 1: NwEngine.Context.Log.Write "Script-action: Checking reboot condition."
 2: NwEngine.Context.Log.Write "Script-action: NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 3: If NwEngine.Context.Reboot = 1 Then
 4: If NwEngine.Context.Args("SuppressReboot") <> "" Then
 5: NwEngine.Context.Reboot = 0 'Setting Flag for no Reboot
 6: NwEngine.Context.Log.WriteWarning "Script-action: Reboot suppressed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 7: ElseIf NwEngine.Context.Args("DelayReboot") <> "" Then
 8: NwEngine.Context.Reboot = 1 'Setting Flag for delayed Reboot
 9: NwEngine.Context.Log.WriteWarning "Script-action: Reboot delayed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 10: Else
 11: NwEngine.Context.Reboot = 2 'Setting Flag for immediate Reboot
 12: NwEngine.Context.Log.Write "Script-action: Enforce immediate reboot."
 13: End If
 14: End If
 ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
 Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E Failed to parse script. Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E While processing Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}' 1 error(s) have been registered.
16:25:13 NwSapsAtlC 1 CompAct.:Installed Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}'
With this the NwSapSetup.log ends with:
16:26:23 NwSapSetup 1 Return-Code: 145
In the next logical step within our environment a uninstallation of the SAP GUI gets started:
 Commandline:
'"C:\Program Files (x86)\SAP\SapSetup\Setup\NWSapSetup.exe" /Silent /Uninstall /Package=PEACY'
This operation gets done with:
12:35:47 NwSapSetup 1 Return-Code: 0
After that the installation of the SAP GUI gets started again with:
 Commandline: '"C:\peacy.sys\source\SAPGUI730PL8\source\setup\NwSapSetup.exe" /noDLG /norestart /Package=PEACY'
Now the Installation gets done with:
12:52:12 NwSapSetup 1 Return-Code: 0
Every first installation of SAP GUI 7.30 PL8 is affected. This is a cross-platform issue (Windows 7 and Windows 8.1). If there was our older package version (SAP GUI 7.30 PL4) installed, the installation of SAP GUI 7.30 PL8 gets done without problems.
Every new client with the SAP GUI 7.30 PL8 assigned or the re-installation of it, and every first installation of the package on a client without SAP GUI leads to the mentioned issue - package gets installed with the mentioned error, afterwards the uninstallation gets started by our environment and finally the installation gets done with the second try. This is not a practicable method for our support staff.
Are there any hints how to resolve this issue. (A upgrade to the newest patch level of SAP GUI is not a practicable solution)
Thanks in advance!
Best regards
Christian

Hello Christian,
For older releases of the SAP GUI client a good approach is to create package for uninstalling old SAP GUI. Depending on the state of the old SAP GUI's you're upgrading those may not be "clean" enough to warrant upgrading in place.
The older GUI's have component's no longer provided with the newer releases so most recommendations are to uninstall completely an do a fresh installation.
I credit Matt Fraser for this information and suggest reading his documentation. The last 4 articles are germane to you're situation. I hope this helps you.
http://scn.sap.com/thread/3620515
http://scn.sap.com/docs/DOC-55477
http://scn.sap.com/docs/DOC-55574
http://scn.sap.com/docs/DOC-55575
http://scn.sap.com/docs/DOC-55633
http://scn.sap.com/docs/DOC-55634
http://scn.sap.com/docs/DOC-55674
Cheers,
Dan Mead

Open URL from SAP GUI

Hi,
I create Business Contacts with BAPI_BCONTACT_CREATEFROMDATA from an external application.
Is it possible to add a URL to this contact, that can be opened from the SAP GUI?
Our customer uses the native windows sap gui. The browser should open and load the
URL if you click on the it.
Any hints how this could be done?
 Thomas

Hi,
Here is a demo.
 CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
 document = 'http://www.sap.com'
 operation = 'OPEN'
EXCEPTIONS
 cntl_error = 1
 error_no_gui = 2
 bad_parameter = 3
 file_not_found = 4
 path_not_found = 5
 file_extension_unknown = 6
 error_execute_failed = 7
 synchronous_failed = 8
 not_supported_by_gui = 9
 others = 10
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
hope this helps u.,
Thanks & Regards,
Sukai

After restart system, cannot start sap (and connect via GUI)

We have installed Solution Manager 7.1 on linux64.
After the accident, and reboot the system , stops producing startsap. On the advice of specialists took over running the "startsap <virtualhost>"
At the command prompt , startsap_DVEBMGS00.log startsap.trc and indicated that the launch was successful .
However, neither in the list of processes to be seen dispatcher, or SAP GUI can not connect to the system.
In addition, there is an assumption that just does not start JAVA Instance.
In this regard, there are a number of questions for the esteemed colleagues :
1. on how the logs directory from which you can learn this starts the ABAP and JAVA stacks ?
2 . As can be verified directly from the server ( what commands ) kaktivnost / no system activity ?
3 . Which log files do I need to provide here , you so that you could possibly help me?

Hi Michael,
You need to check the below things
1. Run R3trans -d to check whether sap can connect to DB or not.(it will create the trans.log file)
 If return code is 0012 , then
 There is some problem with Database
Else return code 0000
 There is some problem with SAP.
2. Now go to the directory /usr/sap/<SID>/DVEBMGS<XX>/work
 and check the log files
 1. dev_w0
 2. dev_disp
 3. dev_ms
 4. stderr<x> logs which alos content important system
Above logs are for ABAP system analysis.
For Java
3. std_server<x>.out
4. dev_server<x>
5. dev_dispatcher
Also check the default tarce and application log as well for java
With Regards
Ashutosh Chaturvedi

Starting SAP GUI via Active X

HI,
I'm trying to find an example of starting the SAP GUI via ActiveX / OCX. I'd like the same functionality as provided by the Enterprise Portal but within a normal HTML page. I'd be interested in the HTML code as well as details regarding the passing of transaction code, etc.
Thanks.
Dick

Unfortuantely, the Current User registry key cannot be updated via SMS. From what I've seen& tested the registry settings can be pushed via a login GPO or login script, but due to our environment including contactors and consultants I still cannot get a high coverage rate.
If i do find a magic bullet - I'll report it here.
In the meantime, perhaps a SAP developer would bring this capability to the Installation Server - it allows us to tune & tweak the packages already. <hint hint> - Xmas is coming!
Kurt

Cannot Start Prepare from Upgrade Assistant GUI

Guys,
We have completed test,DEV upgrade using Upgrade assistant GUI but now during Production upgrade we cannot start Prepare using GUI but we can run from SCROLL Mode.
I am able to open assistant GUI and enter username and password then next screen comes up. Then when I try to open Administration --> Start Prepare it does nothing even connect to SAPup does nothing. Then I need cancel GUI using task manager.
Please help Urgent
Thanks
Santosh

Hi ,
1.Once you run /<DVD mount directory>/PREPARE , choose method EXIT (default value)
2.Start the UA server ( use nohup to run UA server in background to avoid the uncessary termination , for example, network errors etc., )
3. a) Starting with browser ,
http://<host name>:4239 ( use full qualified hostname)
b) copy the uagui.jar file from directory
<upgrade directory>/ua on this host to any local directory.(local system - windows) and run
java -cp <UaGuiDir>\uagui.jar UaGui
4.If system is Unix , try
java -cp <upgrade directory>/ua/uagui.jar UaGui

Cannot start BSP application from browser

hi all
Cannot start standard BSP application TUTORIAL_1 through web browser. When i test TUTORIAL_1 , a seprate browser window opens which asks for login credientals but no contents are displayed.
i checked SICF service and they are active ,also i set parameter icm\server_port_0 and icm\host_name_full
Still i m getting a ABAP DUMP "CX_BSP_HOST_NOT_QUALIFIED" and no contents displayed in browser
Can you anyone please help me urgently?
Regards
Ujval

> What do you say ?
That a little bit of work is still required here. As you write that you don't want to restart application server, and this is only a test server, let me make a suggestion.
Do NOT change anything on the WebAS server.
Step 1: Find you hosts file (on my machine it is c:\winnt\system32\drivers\etc\hosts) and add the following line into this file.
1.2.3.4 myWebAS.domain.ext myWebAS
The name is not important, but must be a string you will remember. The 1.2.3.4 is the IP address of your WebAS. Please write in the correct value instead of my example value!
Step 2: Start you BSP application as usual. When the popup comes for your password, press cancel. You will now see in the top of the browser some URL of the form: http://myWebAS:port/sap/... The :port is only there if you are not using the default port 80. Now manually change the URL by adding the domain you configured previously. It should now be: http://myWebAS.domain.ext:port/sap/... Press ENTER to load this URL.
This way you are using a FQDN, and the browser is able to resolve this pseudo name onto the correct IP address. The WebAS/BSP will be happy with this.
Not the most satisfactory solution, but it should get you at least on the road.
++bcm

Problem with starting Crystal Report document from SAP Gui

Dear all,
in Crystal Reports I created my first report (based on a BW query), which is executed successfully, when I run it directly from CR or from Infoview. The report is stored directly in BW and has been published successfulyl to BOE.
If I try to run it native from the SAP Gui, the following steps happen:
Internet Explorer is started with the following link:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4I4B2HQG8KK2ICFPONVIG5D9Q&sap_sysid=(sysid)&sap_client=010&language=EN&sap-client=010
this link is transcoded to the following:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a//MONHAMBO020.world.mon:8080%2fSAP%2fviewreport.csp(Q&sap_sysid=BWP&sap_client=010&language=EN&sap-client=010&sap-language=EN&cmsname=MONHAMBO020.world.mon
(I already entered /CRYSTAL/CL_BW_HTTP_HANDLER handler in the ce_url service)
and afterwards I get an error 404 -> corresponding service not available
which is obvious, as a service =ce_protcl is not existing at alkl.
If I then execute my CR document again from SAPGui (without closing the IE), the standard BOE login page for the infoview is displayed, but I get an error:
Account information not recognized: The credentials passed to secSAPR3 [] are invalid. Use the following format: sid~clnt/user
I can logon with my BW credentials, and afterwards I can see my CR document.
Any idea, what went wrong?
Thanks,
Andreas

Dear Ingo,
the basic installation of all BOE components was done by the SAP installation service and I checked several times your blog(s) and the corresponding parts on the BOE server and in BW. From my point of view we did all necessary configuration steps on BOE and BW (/CRYSTAL/RPTADMIN) which are necessary to setup the BOE software and the connections.
I checked again the HTTP handler and it still says: /CRYSTAL/CL_BW_HTTP_HANDLER
I stopped and restarted the service, but with no effect at all -> I do not think that I need a restart of the server, right?
My user is as well existing on the BOE server and I can logon to the BOE with my SAP credentials.
I guess as well that the key to the success is the HTTP handler. The first link I provided is the link that is shown in IE, before I logged on to the BW server and I think this is correct, as the transcodification is done after(!) I logged on to the BW server.
A part of the transcodification is as well working, as I can see the replacement of my ce_server, sysid, etc. But it seems to me that the first part of the string is crap:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a
Any further ideas?
Thanks and best regards,
Andreas

Error in starting SAP GUI as part of an Java RFC call from a PC

Hi,
We are on the 4.6C version of SAP and have the latest basis kernel patches that allow an RFC connection to start the SAP GUI. The program that I am running externally is java using the 3.0.1 JCo. The OS of the PC I am using is Windows XP. The SAPGUI version is 7.10 patch level 11.
The program seems to be working properly as the command prompt window goes grey as if there is another window being opened but then I get back this error message and I do not see the GUI.
The message I am getting back is:
Exception in thread "main" com.sap.conn.jco.JCoException:(136) JCO_ERROR_ILLEGAL_STATE:Launching SAP GUI failed, though it was requested(error message:Communication with SAPGUI timed out)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.startSAPGui(MiddlewareJavaRfc.java:1853)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1285)
at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:661)
at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:103)
at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:171)
at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:44)
at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:160)
at com.sap.conn.jco.rt.RfcDestination.initializ(RfcDestination.java:766)
at com.sap.conn.jco.rt.RfcDestination.getSystemID(RfcDestination.java:794)
at com.sap.conn.jco.rt.RepositoryManager.getRepository(RepositoryManager.java:32)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:865)
at GISToSAPWO_Test.get_wo_call(GISToSAPWo.java:91)
at GISToSAPWO_Test.main(GISToSAPWO_Test.java:206)
I have been all over trying to find the solution to this and have come up empty. Any help will be greatly appreciated. If this is the wrong forum for this please let me know and I will re-post.
Thank you in advance for any information you can pass on about the issue,
Mark

Hi Greetson,
Thank you in advance for your response. It is greatly appreciated.
1) In a way yes. I am using the connection setting USE_SAPGUI = 1. This is suppose to start the GUI prior to starting the RFC's program run. If this is not correct please let me know.
2) The code is part of the JCo and the RFC library from what I have read. If this is not correct please let me know.
3) I am only testing from my PC at this moment. I have re-installed my SAP GUI and am now at patch level 13 on 7.10.
4) The application passes in the connection information which includes username and password along with the parameters for the RFC call. I would like the SAP GUI to open without the user having to re-enter his/her username and password. I thought that once the RFC is called using the dialog users credentials that the GUI would then open using the connection. I have used the java pooled connection method and it still does not open the GUI.
5) The purpose is to pass Equipment objects, Functional Location objects and Leak Id objects to an RFC to open a list screen from IW39, List Maintenance Order transaction, for display of each at one pass, as well as open Excel with data from classification for the Leak Id's.
Hope this sheds some light on the problem I am having. Please let me know if more information is needed.
Best regards,
Mark

Stop and start the system via the SAP GUI

........ although I don't know the answer!
We have SAP running on an iSeries/DB2 format.
And we of course have stopped and started our SAP systems many times before via an iSeries screen.
One thing we have never had to do, is stop and start the system via the SAP GUI.
Is this possible? If so, how is it done?
Surprisingly difficult to find a solution online.
Edited by: Juan Reyes on Aug 10, 2010 11:10 AM

Paui,
You can also do a soft shutdown, which waits till the active users/sessions are logged out (Draing out the sesstions) and no more new users are allowed to login during that time.
Goto SM51, select the instace/server you want to stop then menu --> Goto --> Server Name --> Administration --> Shut Down Server (soft).
Here you can also select a hard shutdown if the situation demands by following the same menu path.
Even though your question is answered but I still wanted to update you the options to select.
-Mahesh

Cannot start SAP B1 DI Proxy Service

Hi,
After i restart my machine, my SAP B1 DI Proxy Service cannot start.
Even i go to services.msc to start this DI Proxy Service manually, a message appear as per below :
" The SAP Business One DI Proxy Service service on local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs"
Please advice how to start this DI Proxy Service ?
Thanks a lot.
Regards
Sam

You do not have to re-install everything. It's enough to run the integration package from your installation media and it will perform an repair.
You might need to re-activate the mobile package if you are using that one after the repair is finished.
Br
Anders

SAP NetWeaver 7.0 ABAP Trial Version Issues - cannot start NSP from MMC.

I am trying to install the the SAP NetWeaver 7.0 ABAP Trial Version on Windows XP Professional. The installation ended without errors but now I can not start the NSP instance from MMC. The message server and dispatcher processes both start but message server stop after a few seconds. The dispatcher also stops after sometime. Appreciate any inputs on this. Thanks a lot.................

I was getting similar kind of issue while installing SAP ABAP trail version. After going through documents I found if there will be any SAP installation on that system earlier it will not install SAP ABAP. I format my system, install ABAP server, Install SAP GUI in order. Now it is working fine.
If you do not want to format your system then remove all entry from registry or use virtual PC. I prefer ro use Virtual PC.
Thanks,
Prakash

SAP GUI cannot start browser (Unable to start HTML browser) ?

Similar Messages

Maybe you are looking for