SAP GUI for HTTML??

Hello All,
There is a dump when I am trying to execute a Finance Custom Development excel Upload program - Transaction code: ZFI_GL_UPL in EP 7.0 Portal on F4 help for file path in selection screen.. Runtime error u2018JAVABEANNOTSUPPORTEDu2019.
If I am executing same transaction code in SAP GUI it is working fine.We are using ECC 6.0..
Whether I need to activate any service in ICF??Whether SAP Gui for HTML supports the above??

Prachi,
As suggested in earlier post, have you checked Support Package level of SAP_BASIS component in your system. It should be in patch level 17 to avoid all program errors retaed to HTML GUI. If it is same or above and still you are facing the same problem then you can confirm the SAP GUI version at your end and its patch level.
Regards
Kedar

Similar Messages

Unable to Print Purchase order automatically using SAP GUI for JAVA

Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertz

hi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

ANN: SAP GUI for Java 7.10 available for download

Hi all,
SAP GUI for Java 7.10 is now available at http://service.sap.com/sapgui-java.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/710.
New platforms:
- JSE 6: See System Requirements of platforms for details. Also, usage of JRE 1.4.2 is no longer supported.
- Microsoft Windows Vista (Business and Ultimate editions)
- Mac OS X 10.5 (once the test on the final build of "Leopard" has been successfully completed, see <a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> for latest news)
- HP-UX 11.31
New features:
- Input History: Text previously entered in an entry field is available in a dropdown listbox when the same entry field is reaccessed.
- The installer now can be launched directly from a write-protected directory and the installation process completes considerably faster.
- The Preference Dialog has been redesigned.
- Dynpro Splitter: The feature to display two subscreens divided by a horizontal or vertical splitter has been implemented.
<a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> lists the supported platforms and will include latest news on support for Mac OS X 10.5 (Leopard).
Best regards
Rolf-Martin

Hello Mac users,
ANN: SAP GUI for Java 7.10 rev 1 available for download officially supports Leopard.
Best regards
Rolf-Martin

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

ANN: SAP GUI for Java 7.00 rev 5 available for download

Hi all,
SAP GUI for Java 7.00 rev 5 is now available at http://service.sap.com/sapgui-java.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/700r5.
This revision solves issues in the dropdown listbox, grid and table control. Also an issue with FileDownload is fixed. For more information, please refer to the release notes.
<a href="https://service.sap.com/sap/support/notes/954572">Note 954572</a> lists the supported platforms.
Best regards
Rolf-Martin

hi Mr.Rolf-Martin,
this is kumar writing in regards with the sap gui for java 7.00 rev 4.....i found ur link very helpful ....thanks for the link...and i have a problem in creating a new connectioin ....i have gone thru some of the forum replies and pdf's ....but i could not set up the new connection ....
can u plz help me in creating a new connection .....
the rev4.jar file was successfully installed.....
and whats are the next steps .....
any help appriciated thanks
regards
kumar

Connect to SAP R/3 using SAP GUI for HTML through saprouter

Hello,
I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string, but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
Thanks in advance.

thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

Commenting a Line in ABAP Editor when using SAP GUI for java

Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.

Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Report painter report in portal - Excel output in SAP GUI for HTML

Dear sirs,
I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
thank you for your time and effort,
regards Otto

Hi Otto,
You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
Regards,
Eli

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Change standard SAP GUI for HTML theme to portal theme

Dear Experts,
I have created transaction code for SAP GUI HTML for a custom report program developed in SE38.
We have created a URL iView in Websphere enterprise portal. The Transaction executing well and there are no issues.
But the SAP GUI HTML uses SAP Standard theme. I wanted to change the input field background color which is similar to our portal theme.
Please let me know , how to change the theme of the standard SAP GUI for HTML.
Thanks in advance.
any solution will be greatly appreciated.
Best regards,
Prabhu

Hi Sushil,
Could you please elaborate in detail with steps.
Thanks for your help .. Greatly appreciated...
Best regards,
Prabhu

Store Business Document via SAP GUI for HTML

We are trying to use SAP GUI for HTML via UWL in Portal to deliver Workflow. When we try to attach files for the "Store Business Document" step, it gives an informational message "Store business document Access via 'NULL' object reference not possible" but the documents themselves never get attached. We are on ECC 6.0 and Portal 7.0. Any help is greatly appreciated.
Thanks!
- Rao

I've found a working solution a minute ago: See SAP Note: 510007
Best regards
Danny

SAP GUI for Java 7.00 rev 4 - bug in ABAP download

When I try to download ABAP source code or when I use "Edit Locally" in SE38 (the easiest way how to write/edit programs with a comfortable editor), ABAP source is downloaded to my computer with trailing 0x00 bytes. It has small side-effect in Local Editing: new code with this block is uploaded into SAP and syntax check of such program fails.
Using 7.00 rev 3 works fine.
Has anybody idea how to eliminate this bug?
Wishlist, but to another forum: It will be really nice to assign hot-key to this menu item in SE38.
Thank you,
Pavel

Hello Pavel,
thanks for bringing this to our attention.
This is a bug in SAP GUI for Java 7.00 rev 4 and we will fix this in the next revision.
Regarding the hot-key for the "Edit Locally" menu item, I suggest to give this feedback officially using <a href="http://service.sap.com/message">message wizard</a> on component BC-DWB-TOO.
Best regards
Rolf-Martin

SAP GUI for Java in portal

Hi,
I have installed SAP GUI for Java as written here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_fes/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303334393332%7d
I got a message that the instalation was succesfull. But after clicking the iview with the transaction the iview freezes and the transaction is not displyed. Any ideas where could be the problem?
Thanks and regards
Ivo

hi Ivo Kostelecky,
for SAP GUI
you fill the properties ...
Description -
Aplication Server -
here u give the url
SYSID -
here u give the system id
System Number -
00 System Number
SAPsystem----- here u fill the System

SAP GUI for HTTML??

Similar Messages

Maybe you are looking for