SAP GUI gets closed when executing the transactions SE38 and SE80

Hi SAP Gurus,
I am new to this forum and SAP too. I am part of BASIS.
This issue is regarding transactions SE38 and SE80. The system gets closed when trying to open the transactions SE38 and SE80.
I checked the authorizations, it is fine. The copy user works well.
Then found that it may be regarding SAP GUI.
For solution, referred: https://scn.sap.com/thread/2099868
Steps:
      Uninstall the sapgui
      Manualluy delete the folders related to them like
         X:\users\YourID\Documents\SAP
         X:\users\YourID\AppData\Local\SAP
         X:\users\YourID\AppData\Roaming\SAP\Common
      Re-install using the latest patch available
Even after doing this the issue still persists.
Over here one thing is clear that it is not regarding authorization and all because the copy user works fine. For the system, administrator credentials are working well but only the person's user ID faces this issue.
Someone please help me out in this regard.
Thanks in advance.

Hi Shiva,
Which GUI Version you are using...Please use latest 7.3 Version to avoid any issues related to GUI logon....
Can you clarify these doubts...
1. Are you able to use remaining Tcodes except SE38 and SE80..?
2. Are you getting any error before close the session?
3. If particular user id is facing this issue, then use that credentials and try to check from your end whether you are able to open that tcodes or not..
Regards
Santosh K

Similar Messages

Error when executing the transaction SXMB_IFR (PI 7.00)

Hello All,
When I am executing the transaction SXMB_IFR I am getting the following message in the bottom.
The message is "Enterprise Services Builder address not maintained" and nothing is opened, I mean I am in the initial screen only.
And when I tried to check ditectly using URL "http://<hostname>:<port>/rwb/index.jsp" and tried to click on " Component Monitoring " it is giving the error "java.lang.NullPointerException" .
And when I tried to click on "Performance Monitoring" it is giving the error as follows
"5 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered - Attempt to create JCo connection object failed for domain null - Integration Server unable to specify a JCo client - No component names available from Integration Server - "
Can any body tell me how to correct this error.
Thanks,
Sekhar.

Hi Sekhar,
Have you tried SLDCHECK
All the service User/Password are maintained in exchange
profile(not advisable to change though)
http://<hostname>:5<sys_number>00/exchangeProfile
If ur changing it u might need restart of Web AS.
Run transaction SLDCHECK and see if ur getting any errors.
also check this link for sldcheck
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Connection to SLD does not work
Connection to SLD does not work
/thread/202496 [original link is broken]
Please go through the following link:
Problem with SLD connection
Problem with SLD connection
Also,
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Step 41 "configuring system landscape directory" runs forever during instal
It was solved with OSS note 764176.
Please read OSS note carefully.
connection to SLD failed
Reward points if this helps
Regards
Pragathi.

Crystal reports and SAP BI--------BAPI error when executing the report

Hi All,
I am getting a problem accessing the data from the SAP BI system into the crystal reports.I created a report in CR2008 on a query built in SAP BI.When I execute this query,I am getting the following error.
Database Connection Error:'BAPI Error #:0
Error Occured when starting the parser:timeout during allocate / CPIC-CALL:'ThSAPCMRCV"
CAN ANYBODY HELP ME OUT Please.
Thanks,
Kumar
Edited by: Madan Koka on Dec 15, 2008 5:47 PM

Hi,
I have the same problem. I can create report in Crystal Reports on a query but can`t get data from BW.
Thx in advance for help
Jacek

I am getting error when running the transaction F110

HI friends,
i am using the F110 transaction for transfering the cheque and EFT .
after entering the values in parameter, additionla log and print/data medium.
when i press the staus button then it gives the message as"Parameters entered"
then when i press the "printout " button and checked the box as "Start immediatly"
but it gives the message as "Payment proposal has been released on 16.10.2007 10.15.30 sec
can anybody help me.......
reward points are there for every answer
Regards
Raja.

hi reddy,
go top Check register in FCHN and check where that the check number has been created with that amount.
If not go to SE38 and enter the RFFOUS_C and press execute it and enter the Payyng company code and Identification and enter all the required info and then again execute it
Then u can see with the Check print out.
Hope this helps u and let me know.
Assign the points if helpfull
Ranjit

Background Job get Cancelled when executing the report. Reason?

Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Viji

hi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen

Vaue of sy-tcode when executing the report program in the background

Hello All,
To test and find out the value of sy-tcode when the report program is exectued in the background. I have done the below steps.
1. created a report program with the code given below.
Select option was just defiend to get the selection screen. it is of no use.
Select-options: s_name for sy-uname.
Write:/ sy-uname,sy-tcode.
2. then I created a transaction for the program to identify whether the value of sy-tcode explicitly.
3. Then I launched the transaction and in the selection screen of the program I selected the option of executing the program in the backgroung and i process the job immediately.
4 . In the spool I am able to see the correct sy-uname value but not the sy-tcode.
Where as if i am executing it in the foregroung it is giving the correct value of sy-uname and sy-tcode.
Can anybody provide me the reason as to why this is happening . that is in the backgound mode the value of sy-tcode is getting cleared.
Thanks,
Mohit

Hello,
As they say it is an SAP standard behavior, you can "hardcode" the transaction itself into the ABAP code...
ie:
if sy-batch eq 'X' "->IT MEANS THAT IT IS A BACKGROUND JOB.
w_tcode = 'Z*****'.
else.
endif.
bYE!!
Gabriel P.-

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Error while executing the transaction QC22 (Quality Certificate for Batch)

Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra Chauhan

Hi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

My Whole appication gets closed when i exit from Document Window

I have a MDI Application.
I have several document windows opened inside that document window.
Now in one document window i goes in enter query mode. Queries a record. Now when i closes that document my whole application gets closed. In contrary, If i am creating a new record in that window, saves that record or say do not save but quit the document window then my only that document window gets closed. Not the whole application..
Can u Please Help

You have to sign into this discussion site with your Apple ID in order to participate. Do you sign in when you are trying to view your responses?
You should still be able ro read the response, even if not signed in, but you can't respond if not signed in.
Are you trying to do this with your iPad connected to your PC by any chance? Do I even understand your question correctly?

Urgent! I get value when executing query of VO in page, but null in plsql.

Hi, gentlemen,
Please help me with this issue.
1,My VO query sql is like this:
SELECT acra.receipt_number as receipt_number,
al_a.meaning as receipt_type, acra.currency_code as currency_code,
acrha_a.amount as receipt_amount,
acra.receipt_date as receipt_date,
acrha_b.gl_date as gl_date,
arm.NAME as payment_method,
acra.doc_sequence_value as doc_sequence_value,
al_b.meaning as status,
acrha_a.acctd_amount as acctd_amount,
rcta.trx_number as trx_number,
rc.customer_name as customer_name,
rc.customer_number as customer_number,
rc.jgzz_fiscal_code as taxpayer_id,
rsu.location as customer_site,
acra.customer_receipt_reference as customer_ref,
acra.comments as comments,
acra.cash_receipt_id as cash_receipt_id
FROM ar_receivable_applications_all araa,
ar_cash_receipts_all acra,
ar_lookups al_a,
ar_cash_receipt_history_all acrha_a,
ar_cash_receipt_history_all acrha_b,
ar_receipt_methods arm,
ar_lookups al_b,
ra_customer_trx_all rcta,
(SELECT hca.cust_account_id customer_id,
hca.org_id org_id,
hp.party_name customer_name,
hca.account_number customer_number,
hp.jgzz_fiscal_code
FROM hz_cust_accounts_all hca, hz_parties hp
WHERE hp.party_id = hca.party_id) rc,
(SELECT site_use_id site_use_id,
org_id org_id,
cust_acct_site_id address_id,
location location
FROM hz_cust_site_uses_all) rsu
WHERE araa.receivable_application_id = :1
and acra.cash_receipt_id = araa.cash_receipt_id
and al_a.lookup_type(+) = 'PAYMENT_CATEGORY_TYPE'
AND al_a.lookup_code(+) = acra.TYPE
AND acrha_a.cash_receipt_id = acra.cash_receipt_id
AND acrha_a.current_record_flag = nvl('Y', acra.receipt_number)
AND acrha_a.org_id = acra.org_id
AND acrha_b.cash_receipt_id = acra.cash_receipt_id
AND acrha_b.first_posted_record_flag(+) = 'Y'
AND arm.receipt_method_id = acra.receipt_method_id
AND al_b.lookup_type(+) = 'RECEIPT_CREATION_STATUS'
AND al_b.lookup_code(+) = acra.status
AND rcta.customer_trx_id(+) = acra.receivables_trx_id
AND rcta.org_id(+) = acra.org_id
AND rc.customer_id(+) = acra.pay_from_customer
AND rc.org_id(+) = acra.org_id
AND rsu.site_use_id(+) = acra.customer_site_use_id
AND rsu.org_id(+) = acra.org_id
2, I add the init func in VOImpl which is like this:
the receiptApplicationId is 136877.
public void initQuery(Number receiptApplicationId)
setWhereClauseParams(null); // always reset
setWhereClauseParam(0, receiptApplicationId);
executeQuery();
When executing the page, its value shows to be "現預金".
And I used String receipt_type = (String)oaRow.getAttribute("ReceiptType"); in AMImpl, its value is "現預金".
But when I execute above sql in pl/sql developer, its value is null.
I am really confused with this.
How could I get the whole running sql statement, and know why my issue is like this? It's very urgent, Thanks!

This Query is Org Specific.(As this query using Ord_id attribute to fetch out row.)
you need to set org_id at PLSQL Developer or Toad Level.
Thanks, Avaneesh

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

Performance Problem when executing the report for the first time.

Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.

Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran.

HT4191 I have Notes that transferred to email when I set up a new email acct. They no longer appear in Notes. I can only access them in the email acct. How do I get them out of the email acct and back to the Notes app?

I have Notes that transferred to an Email acct when I set up the acct. The Notes no longer appear in the Notes app only in the Email acct. How do I get them out of the Email acct and back to Notes? I stopped at an Apple store and they told me to copy them from the email back to Notes. But when I was in the email acct, I could not find a way to copy them. Shouldn't Notes remain in Notes unless I specifically send them somewhere else?

Go into Settings > Mail, Contacts, Calendars, select that email account on the right-hand side of the screen and turn Notes 'on' for it - they should then appear in the Notes app instead of as an email folder in the Mail app (they will still be linked to that email account, so you may need to tap the 'Accounts' button at at the top left of the list of notes)

After a trip to Brazil, the App Store apparently thinks my iPad 2 is still there. When I try to download an app, I get a message that I can't get that app from the Brazilian store and have to switch to the U.S. store. The general settings are correct.

After a trip to Brazil, the App Store apparently thinks my iPad 2 is still there. When I try to download an app, I get a message that I can't get that app from the Brazilian store and have to switch to the U.S. store. The general settings are correct. I apparently need to switch locations manually, specifically for the App Store. Help?

Open the App Store app, go to the Featured pane, swipe to the bottom, tap your Apple ID and sign out. Tap again and sign back in. The App Store will automatically change to the store from which your account is authorized to make purchases.

Error When Opening the Transactions/Transactions Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Transactions/Transactions Window
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
ORA-06512: at "APPS.ARP_STANDARD", line 2912
ORA-06512: at "APPS.ARP_GLOBAL", line 282
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502
Can any body help about the error
Thanks in advance.

Did you go through the below notes:
Note:125204.1, Note:153207.1 and Note:191306.1.

SAP GUI gets closed when executing the transactions SE38 and SE80

Similar Messages

Maybe you are looking for