Sap gui on windows terminal server

Hi,
are there best practices to install sap gui 7.30 on a Windows terminal Server 2008 r2?
Regards
Zulma

hi Zulma,
Please follow the step by step guide.
SAP GUI 7.30
Example
How To Install SAP GUI 7.30 on Windows 8
SAP GUI for Java 7.30 Release Notes
Regards,
Jamil

Similar Messages

Tips to install Sap Gui On Windows Terminal Server 2003

Does anybody know any method to install SapGui on Windows Terminal Server 2003 to share it to many users ?
The problem is: when I try to install Sap Gui 6.40 via Control Panel-Add/Remove Programs it tells me that I must change the mode with "change user /install". I dont know the reason why it reports me that if I do it via Control Panel. And if I do that and then I launch the installation again it reports me the warning again.
What should I do ?
Thanks in advance for your help.

We have SAP R3 4.6C.
We want to optimize the bandwidth in a 802.11b radio. Because of that we dont want to run any application in the hand-held.
We'll intend to launch a remote desktop on a dozen hand-helds connecting the Windows 2003 Terminal Services server. In this server we could run SAP GUI, WebSapconsole or the browser.
Its important to note that the hand-held computers must only show the designed windows (sized to 16x20), removing title bars, transaction bar, menu bars, tool bars, status bars, etc. For this purpouse I think we can use WebSapconsole.
With this method we have noticed that when a error or warning is displayed it hides some part of the screen instead of presenting in the status bar.
I hope you all your doubts are clear now, if not just tell me.
Thank you.
PS. Sorry for my english.

Install SAP GUI 7.20 on Windows terminal server

Hi,
I would like to install SAP GUI 7.20 on a Windows Terminal Server and configure it so that all users on the terminal server share a common configuration. As the installation is now all users have to define the systems in GUI the first time they start it, but I would like to do this globally. Is this possible?
Best regards,
Thor-Egil

> estimated 20 or more users who will be using the WTS to do their specific transaction. How much ram do we need to put in the WTS to handle 20 or more users?
This depends on what the users will do on that system. I suggest you contact the hardware vendor for a sizing of the machine.
> and follow up question, do you recommend using terminal servers?
It's an easy way to centralize the administration, you have got only one SAPGui installation.
Markus

Installing SBO 2007A PL47 for use on Windows Terminal Server 2008

SAP has announced it supports Windows Server 2008 32 bit. Does this mean it will also support Windows Terminal Server 2008 32 bit for hosted clients? Any input will be appreciated

Hi,
There is annoucment only of Windows Server 2008. You can check the status on service Market place under Supported platforms.
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Under Product Availablity
Regards
Vikas
SAP Business One FOrums Team
Edited by: Vikas Rastogi on Mar 12, 2009 10:22 PM

Is BPC 7.0 compatible with Windows Terminal Server 2008?

Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
-Brian

B1 pelo WTS (Windows Terminal Server)

Boa tarde a todos...
Estou com um problema aqui na empresa que trabalho, foi implantado o B1 na unidade central e agora estamos implantando na filial de Porto Alegre....
Os usuarios de Porto Alegre irão acessar a base de dados que fica na central em São Paulo via WTS (Windows Terminal Server )...
Acontece que estamos enfrentando um grande problema com velocidade, visto que o acesso de Porto Alegre ficou extremamente lento.
Alguem ja passou por uma situação parecida?
Saberiam como melhorar essa questão da velocidade?
Ou alguma outra sugestão para essa implantação?
Edited by: Rui Pereira on Aug 6, 2008 1:54 PM
Edited by: Rui Pereira on Aug 27, 2008 5:02 PM

Oi
Não existe uma forma de alterar o SAP B1 para melhorar limitações de conetividade remota.
O WTS possui os seus próprios requisitos mínimos de comunicação e consoante o tamanho dos documentos e a quantidade de usuários conetados a performance vai ser mais reduzida.
Caso a rede seja utilizada para outras atividades, como armazenamento de arquivos (Word, Excel, etc...) isso irá afetar ainda mais a performance da comunicação remota.
Normalmente os valores recomendos são:
Windows Terminal Services .
-Bandwidth per user = 20 - 40 Kb
-Memory per user = 50 - 70 MB
Nota: Estes valores são meramente indicativos e a documentação mais recente da Microsoft deve ser consultada relativamente a largura de banda recomendada tal como referido na nota SAP 675004.
Paulo Calado
SAP Business One Forums Team

Windows Terminal Server Std 2008

Does SAP BPC 7.5 NW support Windows Terminal Server Std 2008?

According to 75 NW data course it is stated:
- Windows 2008 server standard edition for development and test systems
- enterprise or data center edition is required for production
grtz
Dries

Can't install LabVIEW Run-Time Engine 6.1 on Windows Terminal Server

With my system admin, we tried to install the LabVIEW Run-Time Engine 6.1 on our Windows Terminal Server NT4. And we get an error all the time:
-install using the plugin
-install using LVRTE.exe
-install after rebooting the server
But I remember that we could install the Run-Time Engine 6.0 on another Windows Terminal Server NT4.
Is there any compatibility issues with the new Run-Time Engine 6.1 ??
Thanks for your help
Cyrille

Cyrille,
What is the error that you get when trying to install the run-time engine?
Are you installing it from the LabVIEW CD, or did you download it from the web site?
To further troubleshoot this problem, it would be best if you send us an email to [email protected] and send the above information.
Also, try running the installer from the command prompt window, and use the following syntax:
setup.exe/l*v
This will save the error log to the file you specify. Send us also this file to help us troubleshoot.
Thanks
Zvezdana S.
National Instruments

Installing SAP GUI on windows using Bootcamp on (MACBook)

HI SDN,
I am looking forward to buy MACBook.
Please provide your suggestions on installing SAP GUI on windows using Bootcamp on MACBook?
Are they any issues installing SAP GUI on Mac machine on Windows
OS?
Running Bex Queries, any excel integration issues while running BEx reports on Mac machine with windows Bootcamp?
I really appreciate if you can forward any related information .
Thanks
(Full points will be awarded for helpfull answers)

Hi,
[SAP Mac Users Forum|iPhone & iPad Application Development; is right place for this question

Cannot quit Visual FoxPro (Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1)

Hi everybody:
This is not the typical question about this error, because the problem here is not about how to quit (CLEAR EVENTS then QUIT). The really and weird problem is that our application do no execute the error trapping routines (Try/Catch and ON ERROR) and tries
to directly Quit.
I have never seen something like this before, error trapping routines not executed.
I try to explain the problem better:
- The user click on the Citrix icon of our App
- Citrix shows the executed processes (establishing connection, applying user config, loading profile, etc)
- The Application (VFP 9 SP2) is started and in any moment, while loading, occurs an error that is not handled by error handlers, and it executes a "kind" of a Quit command, that we detect because have a ON SHUTDOWN to catch it, then the App shut
down and the user must click the Citrix icon and start all over again, up to 7 times, when the App really load and work.
- I think that it is useful to make clear that no QUIT command is really causing this, just the behaviour of the QUIT when an error occurs, but just while loading. If the App get completely loeaded, then everything works as expected
Infraestructure:
- Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1
- There are up to 50 concurrent users max in every virtualized server
- More than 10 GB of free disk space / Up to 4 GB ram
- RAM Memory is never used to the max
- CPU (Intel Xeon) is never used to the max (up to 90% in some cases)
- Data (DBFs for temporal work) ar on local drive, not over network (to avoid network known problems with smb2-3)
- There are connection to a Oracle 11 database for permanently storing the data
About the errors:
- They are not always the same or in the same place. In example, in one execution could fail the query of SET("Printer",2), in other execution could fail a SET PROCEDURE TO xxx ADDITIVE (sometimes already loaded), in other could fail a "DO
WHILE .T." in a init event.... completely crazy, and in all cases the errors are not thrown, not a single error code, the App just try to quit, as if ALT+F4 where pressed.
- All this does not happen allways to everyone, but happens many times in the day to many many users as to be worried
- The same user can have this error many times a day, but not allways
- Some of the problems started when migrating to Windows Terminal Server 2008, but didn't notice nothing special in the beginning, but a year later (last 2014) problems tend to go worse
Tried solutions:
- For the "SET PROCEDURE TO xxx ADDITIVE" error, a "IF xxx $ SET('PROCEDURE')" check was added
- The "SET('Printer',2)" check was moved out of initialization code, so it executes when user want to print the first time. In this case was neccesary to talk with IT guys to map a default printer after the App runs, and not in background, as it
was.
- Other checks and modifications was made to minimize posibility of errors
- Adding a timeout of 5 secs in the start of the program, to force a wait
- Restart of virtual servers (not the phisical) every 3 weeks
What I suspect:
- Some Microsoft optimization (memory?, process execution?) in WTS-2008 may interfere?
- Some VMWare memory management may interfere with WTS-2008?
- Some Citrix management may interfere with both?
- Server degradation because of day to day use
Results until now:
- Apparently, adding the timeout to force 5 secs delay and the restart of the server have made a notable enhancement in App start and running
with far fewer
errors
Has
this happened to anyone?
Thanks! o_O
Fernando D. Bozzo / Madrid (Spain)

I never had this type of problems, but somewhat similar start up problems. I'd say it indicates resource problems. Low RAM can cause many unpredictable things. In my case loading much data at the begin of an application caused out of memory errors, which
were reported and logged normally, though.
I made a small tool using Windows API functions GetPerformanceInfo and GetProcessMemoryInfo, you'll find declaration and usage like usual at the News2News site. It's a bit lengthy and cluttered, but pretty much what you find there anyway, so I'll not post
my utility code.
I could quite clearly see how many users degraded available memory per session and at some time no further instance of the application was possible on the server. In my case RDP was used to start the app, Citrix will be quite the same, in the end the application
runs on some server and users see the remote running application.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

SAP GUI for Windows

I am trying to have SAP UWL Tasks open in the SAP GUI for Windows instead of the SAP GUI for HTML. I have created new folders "Customization"->"Universal Worklist" and created delta linked copies of all the iViews found in "Portal Users"->"Standard Portal Users"->"Universal Worklist".
Then I went to the System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Optional Universal Worklist Service Configuration and changed the "Path to the UWL iViews to the pcd location of the new folder (portal_content/com.myl.custom/com.myl.uwl).
Then I opened the UWL - Launch SAP Transaction iView (my delta linked copy) and changed the SAP GUI Type to "SAP GUI for Windows".
I thought this was all I needed to do but when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all. Any help is appriciated and rewarded.
Edited by: TA on Oct 1, 2008 6:03 PM
I just noticed that the XML content for the configuration has the SAPIACLauncher as the handler instead of the SAPTransactionLauncher...
So Now I have created a new configuration with each transaction is set similar to this:
<ItemType name="uwl.task.webflow.TS20000194.RS4" connector="WebFlowConnector" defaultView="webflowView" defaultAction="launchSAPAction" executionMode="pessimistic">
      <ItemTypeCriteria systemId="RS4" externalType="TS20000194" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchSAPAction" userDecision="no" handler="SAPTransactionLauncher">
          <Properties>
          <Property name="GuiType" value="WinGUI"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
However - when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all. Any help is appriciated and rewarded.

TA,
try to clear cache under
System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Cache Administration Page
Thanks
Bala Duvvuri

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

Swing app in JDK6 continues to rendering slow in Windows Terminal Server

Hi,
Because Swing apps create interfaces internally and not using default OS APIs,
when running into a Windows Terminal Server client, there is no way to optimize
rendering. Windows Terminal Server and Linux FreeNX use a mechanism to send
to client only commands to render the windows. But, because the way Swing works,
not totally integrated to OS APIs, it's not possible for terminal servers to do this,
and these servers render Swing like images, something like VNC do, very slower than.
I have tested native apps and AWT apps, and the difference is very significant,
something like 50-70% faster.
Is there some project in Swing APIs or java.net open-sources to better this?

We are also seeing this issue with a Compiere implementation. With 10 distributed sites across the US, our client wanted to use Windows Terminal Services to simplify the client desktop management of the Swing application.
But performance is terrible...and screen painting issues a real problem. We are also on JDK5 still, so I'm discouraged to see that JDK6 doesn't appear to offer much improvement?
Is there any project afoot to address this issue for installations using terminal services?
Thanks,
Peter

Transaction IView -- SAP GUI for Windows

Hi,
I have created a transaction iview -- sap gui for windows in my portal.
Even thought i logoff from my portal, sap gui session that is opened is not closed.
Can any one please suggest me a way to stop sap gui session also when i logoff from my portal.
Regards,
Nidhideep.

Very difficult. The SAPGUI window doesn't know anything about being launched by the portal.
You could try launching inside the portal content area.
Also, what is the problem with having the SAPGUI still open?
Cheers

Hide back option from sap gui for windows in transaction iview

Dear experts,
sir i m using sap gui for windows in transaction iview in the enterprise portal is there any process to hide the back option or hide command window(in which we write transaction) from the transations iview from the portal not from the registry please help sir............

Hello,
We have faced the same problem and after two days investigating we think it is imposible to hide back button, toolbar ... via wingui (sapgui for windows).
So, be careful with the end user that has access to this iview/role, because he will see the transaction menu also.
I hope this clarify you a bit more.
have a nice day.

Sap gui on windows terminal server

Similar Messages

Maybe you are looking for