Sap HA installation with Sybase Ase 15.7 (Clustered Environment)

Dear Guru's,
I need advice and suggestions on installation for Sap HA systems on production servers with sybase .
System Specs:
OS:Windows 2008 R2
Database :Sybase ASE 15.7
EHP6
I have referred the note 1650511 and getting started with Sybase Database but its just basic info .I need to know how the clustering will be done with Sybase Ase 15.7 and is it possible??
Appreciate your suggestions

Hi Asim,
1. Datafiles & log files assignment while installation According to the HW partition size for production servers we have assigned 3 data files of 250 gb each in different drives on a server
The existing export we are trying to take is from development system where we have upgraded the stack and compo.nents to latest level so we are planning to take the export copy of for database instance and
the database itself is Syabse Ase 15.7.And at this phase screen according to the screen by default the system ask to assign 102 gb for datafiles and log files 1gb Minimum , so in that case can we no t
assign more log file size .However we have not started the installation and we will expereince the same as we have done on Develeopment and quality system which is central sap system and we need to confirm we if can do for production HA system installation
Yes, you may assign more space in advance to datafiles and log file. What the screen shows is the minimum required space to successfully complete the import.
2.On the other hand , If we are doing fresh HA installation ,it will ask for 90 GB datafile and 10 G by default to assign and in this how we going to assign and split in 3 different drives which is of 150 GB
each.
Your Development system has been patched to latest level. Hence there is change in database size in development as compared to fresh HA setup where no patches have been applied. You may add 3 datafiles in each of these drives and assign the size which you prefer. Ensure its more than 10GB.
3.Getting confused in assigning the CI DI ,ERS ,ASCS on node 1 and node 2.
You may follow this simple approach
Node 1: DB + ERS + CI
Node 2: ASCS + DI
4.Is it good decision to do fresh HA installation on production server and lateron upgrade the stack level or does it matter if do system copy as it will save the time .
There is no issue in going with system copy approach as it will save time. If you are not comfortable with system copy method and do not have good command on DB, I shall suggest you to go with fresh installation and then apply patches. This way you are sure there is no junk coming to your production . In system copy , In case your source system has some junk data, the same might get transferred to production.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

SAP DBA Cockpit for Sybase ASE/IQ/RS

SAP has adjusted the lately cockpit to work with Sybase ASE (IQ?/RS?).
Is there a trial version available for inspection? Will the cockpit be distributed like SC/SCC to the customers in the long run?
Those responsible for the distribution, I'd appreciate your comment on this.
Thank you.
Andrew

Hi Mandla.
Please have a look at:
Installation & Upgrade -> Browse our Download Catalog -> SAP Development Projects -> Sybase ASE 15.7 TestDrive
Regards,
Jan

Problem in SAP Server installation with Oracle DB

Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.G

Hello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer

CMP with Sybase ASE failing.

Hi,
I'm using CMP against Sybase ASE. I lookup the
CMP from a servlet and do a create. It fails..
I've included the exception in the post..
any clues.
thanks
hima
SEVERE: EJB5029: Exception getting ejb context : [java.lang.RuntimeException: Un
able to create referenceorg.omg.CORBA.OBJ_ADAPTER:   vmcid: SUN minor code: 10
15 completed: No]
SEVERE: IOP5012: Some runtime exception ocurred in IIOP: [javax.ejb.EJBException
: nested exception is: java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No]
SEVERE: IOP5013: Unable to create reference: [org.omg.CORBA.OBJ_ADAPTER:   vmcid
: SUN minor code: 1015 completed: No]
: nested exception is: java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No]
SEVERE: IOP5013: Unable to create reference: [org.omg.CORBA.OBJ_ADAPTER:   vmcid
: SUN minor code: 1015 completed: No]
SEVERE: EJB5029: Exception getting ejb context : [java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER:   vmcid: SUN minor code: 10
15 completed: No]
WARNING: CORE3283: stderr: javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmci
d: SUN minor code: 1015 completed: No
WARNING: CORE3283: stderr: java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No
---------------------------------------------Exception stack trace --------
WARNING: CORE3283: stderr: at com.sun.enterprise.iiop.POAProtocolMgr.createReference(Unknown Source)
WARNING: CORE3283: stderr: at com.sun.ejb.containers.EntityContainer.internalGetEJBObject(Unknown Source)
WARNING: CORE3283: stderr: at com.sun.ejb.containers.EntityContainer.postCreate(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.nr.NRMessageBean_613168445_ConcreteImpl_LocalHomeImpl.create(NRMessageBean_613168445_ConcreteImpl_LocalHomeImp
l.java:79)
WARNING: CORE3283: stderr: at com.sybase.bis.nr.NRLocalUtil.storeMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.extensions.production.NrHandlerImpl.storeInNR(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMsh.sendMe
ssage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMshLocalBe
an.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMshLocalBe
an_EJBLocalObjectImpl.sendMessage(SenderMshLocalBean_EJBLocalObjectImpl.java:34)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderHandlerImp
l.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.messaging.SendMessag
ing.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.sybm.messaging.ProviderCon
nectionImpl.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.sybm.messaging.ProviderCon
nectionImpl.call(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.sioux.sample.ebXMLSample.handl
eUserMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.sioux.sample.ebXMLSample.doGet
(Unknown Source)
WARNING: CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpSe
rvlet.java:740)
WARNING: CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpSe
rvlet.java:853)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.invokeServletService(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.access$000(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
$1.run(Unknown Source)
WARNING: CORE3283: stderr: at java.security.AccessController.doPrivileged(N
ative Method)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.invoke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.inv
oke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardContextValve
.invoke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.inv
oke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardHostValve.in
voke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.inv
oke(Unknown Source)
WARNING: CORE3283: stderr: at com.iplanet.ias.web.connector.nsapi.NSAPIProc
essor.process(Unknown Source)
WARNING: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.service(Unkn
own Source)
WARNING: CORE3283: stderr: javax.ejb.EJBException: nested exception is: java.lan
g.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmci
d: SUN minor code: 1015 completed: No
WARNING: CORE3283: stderr: at com.sun.ejb.containers.EntityContainer.intern
alGetEJBObject(Unknown Source)
WARNING: CORE3283: stderr: at com.sun.ejb.containers.EntityContainer.postCr
eate(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.nr.NRMessageBean_613168445_Con
creteImpl_LocalHomeImpl.create(NRMessageBean_613168445_ConcreteImpl_LocalHomeImp
l.java:79)
WARNING: CORE3283: stderr: at com.sybase.bis.nr.NRLocalUtil.storeMessage(Un
known Source)
WARNING: CORE3283: stderr: at com.sybase.bis.extensions.production.NrHandle
rImpl.storeInNR(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMsh.sendMe
ssage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMshLocalBe
an.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderMshLocalBe
an_EJBLocalObjectImpl.sendMessage(SenderMshLocalBean_EJBLocalObjectImpl.java:34)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.msh.SenderHandlerImp
l.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.ebxml.messaging.SendMessag
ing.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.sybm.messaging.ProviderCon
nectionImpl.sendMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.trp.sybm.messaging.ProviderCon
nectionImpl.call(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.sioux.sample.ebXMLSample.handl
eUserMessage(Unknown Source)
WARNING: CORE3283: stderr: at com.sybase.bis.sioux.sample.ebXMLSample.doGet
(Unknown Source)
WARNING: CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpSe
rvlet.java:740)
WARNING: CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpSe
rvlet.java:853)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.invokeServletService(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.access$000(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
$1.run(Unknown Source)
WARNING: CORE3283: stderr: at java.security.AccessController.doPrivileged(N
ative Method)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve
.invoke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.inv
oke(Unknown Source)
WARNING: CORE3283: stderr: at org.apache.catalina.core.StandardContextValve

Hi
Thanks for the information.
I debugged the problem a little more.
Looks like this is what's happening. If you look
at the stack trace, one of the functions on the stack
is "internalGetEJBObject". What I've here is a ejb-local-ref.
Looking at the source code for EntityContainer,
shouldn'nt it be doing a
"internalgetEJBLocalObject" or something like that.
This is a bean with both remote and local interfaces.
Just to verify, I removed the remote interfaces from
the bean and it works fine. Looks like a bug to me
when lookup occurs using a ejb-local-ref on a bean
with both remote and local interfaces. Sample
is just a local bean.
Please let me know if you need more information
thanks
hima

SAP BO Installation with Oracle Database

Hello all,
My client uses SAP R/3 with Oracle database. Now we have to install Business Objects on another machine.
I've read the documentation on Installing Procedures but there are some questions still not clarified.
1. Do I have to install Oracle in the new machine?
2. If not, can I connect BOBJ to the database of the SAP R/3 Server?
3. If I want to have three systems (Like in R/3, Productive, Tests and Development) do I have to install BOBJ in different machines?
Thanks in advance,
Regards

1. you dont have to insall Oracle database at the BO machine side, you just need any database to hold the BO repository.
2. you cant connect directly using BO, only Crystal reports can connect directly to R3 database, you need to have a BW in between.
extract your data into the BW, and let BO connect to BW using the BO integration kit for SAP solutions.
3. no you dont have to have 3 different machines, using one BO machine you connect to them all, but you may need build a BO environment, (Development, Production servers)
good luck

SAP Adapter Best Practice Question for Deployment to Clustered Environment

I have a best practices question on the iway Adapters around deployment into a clustered environment.
According to the documentation, you are supposed to run the installer on both nodes in the cluster but configure on just the first node. See below:
Install Oracle Application Adapters 11g Release 1 (11.1.1.3.0) on both machines.
Configure a J2CA configuration as a database repository on the first machine.
Perform the required changes to the ra.xml and weblogic-ra.xml files before deployment.
This makes sense to me because once you deploy the adapter rar in the next step it the appropriate rar will get staged and deployed on both nodes in the cluster.
What is the best practice for the 3rdParty adapter directory on the second node? The installer lays it down with the adapter rar and all. Since we only configure the adapter on node 1, the directory on node 2 will remain with the default installation files/values not the configured ones. Is it best practice to copy node 1's 3rdParty directory to node 2 once configured? If we leave node 2 with the default files/values, I suspect this will lead to confusion to someone later on who is troubleshooting because it will appear it was never configured correctly.
What do folks typically do in this situation? Obviously everything works to leave it as is, but it seems strange to have the two nodes differ.

What is the version of operating system. If you are any OS version lower than Windows 2012 then you need to add one more voter for quorum.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

SAP fresh installation with Oracle 11.2

Dear all,
Do you know if it's already possible to install a new SAP system with Oracle 11.2.
I'm trying to install Solution Manager 7.0 ehp1 with Oracle 11.2.
The problem is that SAPINST does not give me the possibility to choose oracle version 11.2. Only 10.2 is possible. (I patched SAPINST to the last version)
If I select 10.2 SAPINST gives an error "The DB Home folder I:\oracle\PSM\112 has not the correct DB Server version 102. Select a different DB Home folder or install the correct database server software."
Could anyone help me?
Thanks in advance.
Best Regards,
Olivier

Hello,
New installations of systems running with Oracle 11.2 are planned to be certified by early Q4 2010.
For key information on the status of Oracle 11.2 database, read SAP Notes 1398634 and 1434131.
Thanks & regards,
Sagar

SAP first installation with Oracle 11g

Hi,
do you know for SAP first install is now supported Oracle 11.2.0.2 or only installing first 10.2.0.5 and upgrade to 11.2.0.2 ?
Thank you!

Hi, direct installation of 11.2 is possible for SAP products based on SAP NetWeaver 04 (Web AS 6.40) / SAP NetWeaver 7.00 & SAP NetWeaver 7.01 (Check also here: SAP on Oracle)

SAP HA Installation - Windows 2012 with Sybase

Dear All,
I have just started the SAP HA Installation with Sybase Database on Sybase, but I am facing an issue in the First Cluster node installation.
First Cluster Node( Last error reported by the step: Windows system error message: 5942. Message: 'The resource failed to come online due to the failure of one or more provider resources. '.). You can now:
Cluster Even Logs -
Cluster network name resource 'SAP SBP NetName' failed to create its associated computer object in domain '***-co.com' during: Resource online.
The text for the associated error code is: Access is denied.
Please work with your domain administrator to ensure that:
- The cluster identity '***-PRD$' has Create Computer Objects permissions. By default all computer objects are created in the same container as the cluster identity '***-PRD$'.
- The quota for computer objects has not been reached.
- If there is an existing computer object, verify the Cluster Identity '***-PRD$' has 'Full Control' permission to that computer object using the Active Directory Users and Computers tool.

Dear All,
I have just started the SAP HA Installation with Sybase Database on Sybase, but I am facing an issue in the First Cluster node installation.
First Cluster Node( Last error reported by the step: Windows system error message: 5942. Message: 'The resource failed to come online due to the failure of one or more provider resources. '.). You can now:
Cluster Even Logs -
Cluster network name resource 'SAP SBP NetName' failed to create its associated computer object in domain '***-co.com' during: Resource online.
The text for the associated error code is: Access is denied.
Please work with your domain administrator to ensure that:
- The cluster identity '***-PRD$' has Create Computer Objects permissions. By default all computer objects are created in the same container as the cluster identity '***-PRD$'.
- The quota for computer objects has not been reached.
- If there is an existing computer object, verify the Cluster Identity '***-PRD$' has 'Full Control' permission to that computer object using the Active Directory Users and Computers tool.

An error occurred while installation of ERP 6.0 Ehp 6.0 on Sybase ASE 15.7.0.

Hi All
I am installing SAP IDES Ehp 6 on SYBASE_ASE_15.7.0.50 and facing an error as follows:
An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Sybase ASE > Central System > Central System( Last error reported by the step: Assertion failed: File C:\SAP ECC 6.0 Ehp 7.0\Sybase ASE 15.7.0.050 RDBMS\Sybase ASE 15.7.0.050 RDBMS Windows Server on x64 64bit\SYBASE_ASE_15.7.0.50_RDBMS_for_BS_\SYBASE_WINDOWS_X86_64\dbsrvresp.txt is missing on the RDBMS media). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP6/AS-ABAP/SYB/CENTRAL/.
Would you help me please

please download correct software.
Installations and Upgrades - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP6 FOR SAP ERP 6.0" SAP EHP3 FOR SAP NETWEAVER 7.0" SOFTWARE PROVISIONING MGR 1.0
SOFTWARE PROVISIONING MANAGER
INSTALLATION, COPY, AND TRANSFORMATION OF SAP ABAP AND JAVA SYSTEMS
General Information
Software Provisioning Manager 1.0 SP04 supports:
With SWPM10SPxx_PL.SAR:
Products based on SAP NetWeaver 7.1x
SAP NetWeaver Composition Environment 7.1x
SAP NetWeaver Composition Environment 7.2
Products based on SAP NetWeaver 7.3x
Products based on SAP NetWeaver 7.4
With 70SWPM10SPxx_PL.SAR:
SAP NetWeaver 7.0, including Enhancement Package 1, 2, 3
SAP Business Suite 7i 2011, 2010, 7 SR1, 2005 SR3 based on SAP NetWeaver 7.0, including Enhancement Package 1, 2, and 3
SAP Solution Manager 7.0 including EHP1 SR1
SAP Solution Manager 7.1 SR1
Thanks
Siva

SAP EHP6 Installation Steps with Oracle RAC

Dear Experts,
i am looking for step by step guide for SAP ehp6 installation with Oracle RAC. if anyone can help please guide me with the steps or share if any document available
Thanks

Hi Wali,
You can follow below documentation to perform your installation on Oracle RAC.
http://scn.sap.com/docs/DOC-8835
This document is very useful for planning the installation and executing the same
Some other useful documents
Installation of SAP on RAC with Oracle ASM
SAP note which needs to be referred for installation
Note 527843 - Oracle RAC support in the SAP environment
Hope this helps.
Regards,
Deepak Kori

Unable to install Client Tools for Sybase ASE 15.7 on Windows Server 2012 64-Bit

Hello Folks,
I just downloaded the client tools package from https://support.sap.com/swdc --> Installation and Upgrades --> A-Z list --> SAP ADAPTIVE SERVER ENTERPRISE --> SYBASE ASE 15.7 --> Installation --> Microsoft Windows --> 51044415.zip
I'm trying to install the client tools for a newly provisioned Windows 2012 64-Bit machine. After unzipping the folder and running autorun, the installation does not proceed. When I go to pcclient64 and run either setup.exe or setupConsole.exe, I get the error "This Application has Unexpectedly Quit, Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)". I stumbled across various posts on the forum, and it appears that the installer is not certified for Windows Server 2012. I tried using the compatibility mode for Windows 7, and it proceeds further and launches the SAP GUI; however, it closes afterwards.
Any suggestions would be greatly appreciated. Thanks in advance.

Hi,
51044415 is a PC-Client 15.7 refresh.
You are using a version that was not certified with Windows 2012. Get the most current version PC-Client 15.7 SP130 or SDK 15.7 SP130 or SP132.
If your looking for PC-Client5.7 SP130 look for EBF23439
We didn't get certified with Windows 2012 until SDK 15.7 ESD#6 even with that I reported a few minor issues.
You need the following on the machine before the installation.
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2005 Redistributable Package (x86) (or dsedit and ocscfg will not work)
Microsoft Visual C++ 2005 Redistributable Package (x64) (or dsedit and ocscfg will not work)
Thanks,
Dawn Kim

DBA Cockpit Sybase ASE - Access Plan not displayed

Hello,
We are running SAP ECC 740 on Sybase ASE 15.7, I'd previously used DBA Cockpit to view access plans for queries prior to our ECC upgrade. Since upgrading to 740 DBA Cockpit has had a facelift, and now I can't see an Access Plan when I try clicking "Show Plan" on the cached statements or when I try clicking EXPLAIN in ST05 - I just get a red cross (see attached image).
Does anyone have any ideas about how to view the access plan? If I try a Runtime Explain I get a blue spinning half-a-loop and it just sits spinning and never displays anything.
Thanks, Chris

Hi,
I am running java 8 update 4 i.e. java 1.8! so I would suggest as per stefan also upgrade yoru java version.
Advanced settings on java control panel:
Debugging                              - not selected
Java console                         -hide console selected
Default Java for browsers          -InternetExplorer
Shortcut creation                    -Prompt user if hinted
JNLP File/Mime Association     -Prompt user
Application Installation               -install if hinted
Secure Execution Environment    -all select but (Show site certificate from server even when listed)
Mixed code sanbox vs trusted    -Enable (show warning if needed)
Perform signed code certificate revocation checks on - All certificates in chain of trust
Checked for signed code certificate revocation using - Both CRLs and OCSP
Perform TLS certificate revocation checks on - all certificates in chain of trust
Checked for TLS certificate revocation using - Both CRLs and OCSP
Advanced security settings: all select but (Use SSL 2.0 compatible ClientHello format)
Miscellaneous                               - nothing selected
Kind Regards,
Johan

Sybase ASE & BODS connectivity issue

Datastore creation give server not found error with Sybase ASE.
Unable to create a data store when use Sybase ASE database Tried different combination of DB Server name like server name, server name + port number, IP, & IP + port number. It giving me same error all the time..
Tested connection is ODBC it work fine but same config from same server it gives me following error....
Can you help us my your valuable comment on this issue..
WARNING: Cannot establish database connection.
'Sybase connection error: <Sybase CS Library message number
<101188867> Serevity <5>: Message Text is ct_connect():
directory service layer: internal directory control layer error:
Requested server name not found>' <BODI-1111341)
Do you want to save this datastore anyway?
Thanks

The following is the result of quite a bit of trial-and-error on a contract in Miami a couple of months ago.
If you don't already have it, you need to obtain and install Sybase's "PC Client," aka "Adaptive Server Enterprise PC Client". In my case, I used ver. 15.7. This software gets installed on the DS job servers. You may want it on your local workstation, too, to be able to roam around in the ASE's data.
In Data Services, I assume you've created a datastore using DS's native ASE driver. (I.e., don't use ODBC.)
Find and run the "Open Client Directory Service Editor," one of a slew of gizmos which comes w/ the PC Client.
Pick "Interfaces Driver" (likely the only thing you can pick). You'll get a blank, intimidating-looking "DSEDIT1" window.
Right-click in the "Server" pane on the left and select "Add...".
For the "Server Name," I think it's likely safest & sanest to just use the host name of the server, and suggest you use that.
Then, you'll have the server you added, on the left, and a grid of attribute-and-value pairs on the right. Modify the Server Address, and you'll get a "Network Address Attribute" window. Click "Add". Select "TCP" as the protocol, and enter the address in the format "hostname, port", as in this example:
asehost1.somecompany.com, 10100
ASE listens on port 10100 by default, I think, but your system may be elsewhere. For me, the DS datastore then worked just fine.
Good luck!

Sap HA installation with Sybase Ase 15.7 (Clustered Environment)

Similar Messages

Maybe you are looking for