SAP HANA Model validation error - Index out of range

Hi,
Creating a simple Attribute View using the SYSTEM user.
1. Log on with SYSTEM
2. CREATE SCHEMA EFASHION
3. CREATE THE TABLES UNDER EFASHION
4. LOAD DATA INTO TABLES
5. GRANT SELECT ON SCHEMA EFASHION TO _SYS_REPO WITH GRANT OPTION
Whilst activating/validating the Attribute View, face the following error:
Repository: Activation failed for atleast one object; atleast one runtime reported an error during activation. Please see CheckResults for details
Repository: Encountered an error in repository run time extension : Index $IDX$out of range [$BEG$, $END$]
Please help me to resolve this issue.
Thanks & Regards,
Ramana.

Hi,
I too have the exact same issue and error.
The tables are created under the efashion schema using the SYSTEM user. The tables are created as "column" tables.
Regards,
Asif.

Similar Messages

PI 7.31 (single stack) posting to RFC configuration gives this error: om.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system extern ...

Getting cryptic error while trying to post to a custom RFC from PI 7.31 single stack.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system <extern>|pidevhost)
Does anyone recognize this error and/or know of detailed instructions for registering custom RFCs in PI 7.31. I could possibly have configured the target wrong but no error says so.
This is a File-->PI-->RFC scenario. The file processing is super simple and a configuration I have used successfully before. I would assume I'd get a different error if it couldn't parse the file.
Jody

Not shure if you already did but try getting some details with XPI Inspector. Also increasing log level for this category might help. You also may wanna check authorization (even if this should show with a different error text) in ECC using ST01.
My guts feeling is that there is something wrong with payload / signature of RFC.
Cheers
Jens

Error when Hana cube are imported in SAP Hana models management

Hello
I trying to import 2 or more cubes in the module SAP Hana models management and i cannot do it, the message error says that a model exists with the same name but the name of my model is different. I checked my Info.xml and the tag of name is different. How can i import more than one model in this module?
Thank you.

Hi San Xu,
I am working with SAP 9.0 PL:10 hot fix1 and i can´t see which is the IA tag or you refered B1AVersions tag, this is the code for my info.xml
<?xml version="1.0" encoding="utf-8" ?>
- <HANAModelPackageForB1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" defaultLanguage="English">
<Name>Cubo circulo bizarro</Name>
<Author>Agasys S.A. de C.V.</Author>
<ModelVersion>1.1</ModelVersion>
- <HANAVersions>
<Version />
</HANAVersions>
- <B1Versions>
<Version />
</B1Versions>
- <B1AVersions>
<Version />
</B1AVersions>
<Description />
- <Metadata>
<CreatedAt>03/06/2014 01:47:11 p.m.</CreatedAt>
<ChangedAt>03/06/2014 01:47:11 p.m.</ChangedAt>
<ChangedBy />
</Metadata>
- <ModelList>
<Model name="SYS_AT_PCLIENTES" type="AttributeView" />
<Model name="SYS_AT_PDEVOLUCIONES" type="AttributeView" />
<Model name="SYS_AT_PSUCURSALES" type="AttributeView" />
<Model name="SYS_AT_PTRANSACCIONES" type="AttributeView" />
<Model name="SYS_CA_PCIRCULOBIZARRO" type="CalculationView" menu="SYS_CA_PCIRCULOBIZARRO" />
</ModelList>
</HANAModelPackageForB1>
Thanks

Array index out of range error in PCR!

Hi All,
I am trying to test the PCR forms in MSS in portal.
When I click the "Edit Form" button in step 2, I am getting the following error.
"java.lang.ArrayIndexOutOfBoundsException: Array index out of range: -1"
I tried all the forms(Change Emp Group/SubGroup, Change Emp Sub Area,...).
I am getting the same error.
What could be the reason for this error?
How do I resolve it?
Thanks
Sundar

Hi Siva,
I am getting below error code.
It looks like what you said.
java.lang.ArrayIndexOutOfBoundsException
     at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10210)
     at com.sap.aii.proxy.framework.core.JcoBaseTypeData.setElementValue(JcoBaseTypeData.java:828)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.setAttributeValueAsBoolean(DynamicRFCModelClass.java:527)
     at com.sap.pcui_gp.isr.isrprocessevent.model.Isr_Get_Form_Url_Input.setI_Append_Cache_Info(Isr_Get_Form_Url_Input.java:162)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1029)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
Thanks
Sundar

MP Error: StringIndexOutOfBoundsException: String index out of range: -1

Hi All,
We are using PI 7.1 EHP1, Where in we would like to see the capabilty of User-Module for Conversion of IDoc Messages Between Flat and XML Formats. Gone thru the blog (/people/sap.user72/blog/2005/07/04/get-into-the-zone - Part 2) and maintained the necessary NWA configurations and maintained the necessary module parameters (SAPRelease, SourceJRA, TargetDestination) in Sender File Adapter.
Now the file is not been picked by file adapter upon checking the Comm Channel Monitoring below error:
MP: exception caught with cause java.lang.StringIndexOutOfBoundsException: String index out of range -1
Any help would be highly appreciated.
Thanks in advance

Hi Ramani,
I hope you must have found a solution on this, if not then kindly consider changing your source files, as this error corresponds to only one thing: i.e. DATA Issue. You need to correct the data which you providing to the module for conversion.
I faced this problem and corrected it by just correcting my test file.
Regards,
Nipun Shedhani

HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7

All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
    // Declare members:
    private String companyId;
    private String userName;
    private String password;
    private String developerKey;
    private Date   effDt;
    private String greaterThanEffDt;
    private String lessThanEffDt;
    // Declare constants:
    final static private String breakLine = "+---------------------------------------------------------------------------+";
    final static private String format    = "yyyy-mm-dd";
    private enum ReqId {
        PrimaryReq(25),
        PrimaryReqCEO(26),
        EmCarePrimary(27),
        RTI(28),
        EmCareClinical(29);
        private int reqId;
        private ReqId() {
        private ReqId(int value) {
            reqId = value;
        public int getReqId() {
            return reqId;
    // Getters and Setters:
    protected String getCompanyId() {
       return this.companyId;
    protected void setCompanyId(String value) {
       this.companyId = value;
    protected String getUserName() {
       return this.userName;
    protected void setUserName(String value) {
       this.userName = value;
    protected String getPassword() {
       return this.password;
    protected void setPassword(String value) {
       this.password = value;
    protected String getDeveloperKey() {
       return this.developerKey;
    protected void setDeveloperKey(String value) {
       this.developerKey = value;
    protected Date getEffDt() {
        return this.effDt;
    protected void setEffDt(Date value) {
        this.effDt = value;
    protected String getGreaterThanEffDt() {
       return this.greaterThanEffDt;
    protected void setGreaterThanEffDt(String value) {
       this.greaterThanEffDt = value;
    protected String getLessThanEffDt() {
       return this.lessThanEffDt;
    protected void setLessThanEffDt(String value) {
       this.lessThanEffDt = value;
    public void runProgram()
        SFAPIService mySFAPIService;
        String CompletionText = "";
        String effDtStr2 = null;
    /* Code your program logic here.
    * Use getJDBCConnection method to get the connection object for any
    * JDBC operations.
    * Use CpContext provided commit,rollback methods to commit/rollback
    * data base transactions.
    * Don't forget to release the connection before returning from this
    * method.
    /* Call setCompletion method to set the request completion status and
    * completion text.
    * Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
    * ReqCompletion.ERROR.
    * Use Completion text message of length 240 characters. If it is more
    * than 240 then full string will appear in log file and truncated 240
    * characters will be used as request completion text.
    try
        ServiceFactory factory = ServiceFactory.newInstance();
        mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
        SFAPI api = mySFAPIService.getSFAPI();
       /// SFAPI api = new SFAPI();
        //Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
        //requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
        System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
        System.out.println("End Point   => " + mySFAPIService.getServiceName().toString());
        System.out.println(breakLine);
        // Authentication: Login to SFAPI:
        SFCredential credential = new SFCredential();
        // Fake credentials being passed in for this post:
        credential.setCompanyId("XXX");
        credential.setUsername("XXX");
        credential.setPassword("XXX");
        credential.setDeveloperKey("XXX");
        HTTPConnection httpsConnection = null;
        OracleSSLCredential _credential = new OracleSSLCredential();
        _credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
        /*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
        System.setProperty("javax.net.ssl.trustStorePassword","changeit");
        System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
        // SFParameter: Define a generic SFParameter List. This is a necessary parameter
        // to invoking calls in SFAPI:
         /*System.setProperty("javax.net.ssl.keyStore",
         "file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
         System.setProperty("javax.net.ssl.keyStorePassword","welcome");         */
        /* System.setProperty("oracle.net.wallet_location",
                      "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2)                     */
        File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
        boolean exists = kstore.exists();
        if (!exists) {
            System.out.println("Keystore does not exist");
        else {
            System.out.println("Keystore does exist");
        System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
        System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
        //System.setProperty("proxySet", "false");
        //System.setProperty("http.proxyHost", "127.0.0.1");
        //System.setProperty("http.proxyPort", "8080");
        System.out.println(kstore.getAbsolutePath());
        List<SFParameter> lst = new ArrayList<SFParameter>();
        SFParameter param = new SFParameter();
        param.setName("");
        param.setValue("");
        lst.add(param);
        SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
        Login login = new Login();
        try {
            login.setCredential(credential);
            System.out.println("1");
            login.setParam(sfParam);
            System.out.println("2");
            LoginResponse loginResponse = new LoginResponse();
            LoginResult loginResult = new LoginResult();
            try {
                 loginResponse = api.login(login);
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("3");
            try {
                 loginResult = loginResponse.getResult();
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("4");
            IsValidSession vs = new IsValidSession();
            IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
            System.out.println("5");
            if (isValidSessionResponse.isResult()) {
                 System.out.println("Session is valid");
                 System.out.println("Result => " + loginResult.getSessionId());
                 System.out.println(breakLine);
                Logout logout = new Logout();
                LogoutResponse logoutResponse = api.logout(logout);
                if (logoutResponse.isResult()) {
                     System.out.println("Logout of SFAPI Successful");
                else {
                    System.out.println("Logout of SFAPI Unsuccessful");
            else {
                 System.out.println("Session is invalid");
                List<Error> errors = new ArrayList<Error>();
                for (int i = 0; i < loginResult.getError().length; i++) {
                    errors.add(loginResult.getError()[i]);
                for (int i = 0; i < errors.size(); i++) {
                     System.out.println("Error Indice   => " + i);
                     System.out.println("Error Code:    => " + errors.get(i).getErrorCode());
                     System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
                     System.out.println(breakLine);
                } // end for loop of SFObject errors
            } // end InvalidSession
        catch (Exception e)
             System.out.println("Session Credential Exception");
             System.out.println("Exception => " + e.getMessage());
             System.out.println(breakLine);
    catch (Exception e)
        System.out.println("Parameter List Exception");
        System.out.println("Exception => " + e.getMessage());
        System.out.println(breakLine);
    }   // end runProgram
    // Constructor:
    public SFAPITest() {
    } // end constructor
    public static void main (String args[]) {
        try
            SFAPITest test = new SFAPITest();
            test.runProgram();
        catch (Exception e) {
            System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
    HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.

The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two.

Getting error: RC-50004 String index out of range when running adclonectx.pl

Hi,
I'm trying to clone a RAC database on the same host. I'm using the MOS note:
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone ( Doc ID 559518.1 )
I run the command from Step 5.1.3:
perl adclonectx.pl ......
But getting error:
"RC-50004: Error occurred in CloneContext:
String index out of range: 38
ERROR: context creation not completed successfully."
From the Clone Context logfile:
PROMPT :
Number of DATA_TOP's on the Target System [3]
ANSWER :
1
PROMPT :
Target System DATA_TOP Directory 1
ANSWER :
+DATA/prod/datafile
ASM Path, not Validating: +DATA/prod/datafile
Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: 38
         at java.lang.String.substring(String.java:1765)
         at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6681)
         at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1114)
         at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
         at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5260)
RC-50004: Error occurred in CloneContext:
String index out of range: 38
Context file creation not succesful
And workaround/solution will be much appreciated. Thanks very much.

FYI, I'm cloning on the same host as target. This is 2 node EBS RAC setup.
PATH is OLD source for contextfile.xml
Latest clone patches applied.
Here is the complete output from the log file...
[oracle@PPDBS11 bin]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin/CloneContext_0908210110.log
Using admin directory: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin
#------Log File time stamp: 0908210110------------
# $Header: CloneContext.java 120.92.12010000.26 2013/05/06 12:02:01 mmanku ship $
# Running on          - ppdbs11
# Source Host         - null
# Domain Name         - <xxxx.yyyy.zz>
# Context Location    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/PREPROD1_ppdbs11.xml
# Context Type        - null
# Context Template    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/template/adxdbctx.tmp
# Clone Stage Area    - null
# Pairs File          - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
# Destination Context - null
# Validation          - false
# Platform Migration - false
# no prompt           - false
Variables extracted from pairsfile: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
****************************************************/n
   s_undo_tablespace = APPS_UNDOTS1
   s_dbClusterInst = 2
   s_db_oh = /u01/app/oracle/product/11.2.0/dbhome_1
**************************************************** PROMPT :
Target System Hostname (virtual or normal) [ppdbs11]
ANSWER :
ppdbs11 PROMPT :
It is recommended that your inputs are validated by the program.
However you might choose not to validate them under following circumstances:           -If cloning a context on source system for a remote system.
         -If cloning a context on a machine where the ports are taken and
          you do not want to shutdown the services at this point.
         -If cloning a context but the database it needs to connect is not available. Do you want the inputs to be validated (y/n) [n] ?
ANSWER :
n PROMPT :
Target Instance is RAC (y/n) [y]
ANSWER :
y PROMPT :
Target System Database Name
ANSWER :
PROD PROMPT :
     Host name [ppdbs11]
ANSWER :
ppdbfmisscan PROMPT :
     Virtual Host name [null]
ANSWER :
ppdbs11-vip PROMPT :
     Instance number [1]
ANSWER :
1 PROMPT :
     Private interconnect name [ppdbs11]
ANSWER :
ppdbs11-priv PROMPT :
Target System Base Directory
ANSWER :
/u01/app/oracle PROMPT :
Oracle OS User [oracle]
ANSWER :
oracle PROMPT :
Oracle OS Group [oinstall]
ANSWER :
oinstall PROMPT :
Target System utl_file_dir Directory List
ANSWER :
/usr/tmp/PROD PROMPT :
Number of DATA_TOP's on the Target System [3]
ANSWER :
1 PROMPT :
Target System DATA_TOP Directory 1
ANSWER :
+DATA/prod/datafile
ASM Path, not Validating: +DATA/prod/datafile
Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: 38
         at java.lang.String.substring(String.java:1765)
         at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6687)
         at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1120)
         at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
         at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5266) RC-50004: Error occurred in CloneContext:
String index out of range: 38
Context file creation not succesful

Repost: Oracle VM Manager (IndexError: list index out of range) error

The Oracle VM Manager software will not import a server side created VM for management purposes. It is giving an index-out-of-range error when trying to retrieve the Memory Size from the jumpbox.xen file (I created a symbolic link to this file called vm.cfg).
Here is the log for the index-out-of-range error:
ovs_root.log
"2008-08-20 02:03:26" INFO=> utl_list_dir: directory('/OVS/running_pool') => pro
jectweb/,infinesse-web/
"2008-08-20 02:03:26" INFO=> list_dir: directory('/OVS/running_pool') => project
web/,infinesse-web/
"2008-08-20 02:03:26" INFO=> utl_get_vm_size: vm('/OVS/running_pool/infinesse-we
b') => 12020
"2008-08-20 02:03:26" INFO=> get_vm_size:vm('/OVS/running_pool/infinesse-web') =
success:size=12020"2008-08-20 02:03:26" ERROR=> xen_get_memory:vm('/OVS/running_pool/infinesse-web
')=><IndexError: list index out of range>
"2008-08-20 02:03:26" INFO=> get_vm_memory: vm('/OVS/running_pool/infinesse-web'
) scope=cfg rs=failed:<IndexError: list index out of range>
and my vm.cfg file:
# -- mode: python; --
# This JumpBox requires Hardware Support otherwise known as Xen's HVM mode.
# To test your Xen installation if it supports this mode, issue the following
# command:
# sudo xm info | grep xen_caps
# it should return a capabilities line like:
# xen_caps : xen-3.0-x86_32 hvm-3.0-x86_32
# as long as there is an hvm entry as shown above it should work.
## If starting Xen fails you may need to set a custom path
## for your kernel or device model files. Uncommant the following
## variables and put in the appropriate paths
## Uncomment and set your custom hvm loader path here
# hvm_path = ""
## Uncomment and set your custom device model loader path here
# devmodel_path = ""
# You will probably want to uncomment the following VNC variables so you
# can see the JumpBox console over VNC. Make sure to set the vncpassword to
# something unique. Also, if you run multiple JumpBoxes on the same host, you
# may want to leave vncdisplay unset and use the domid for the display numbers
#vnc=1 # enable VNC library for graphics, default = 1
#vnclisten="0.0.0.0" # address that should be listened on for the VNC server if vnc is set.
#vncdisplay=1 # set VNC display number, default = domid
#vncconsole=1 # enable spawning vncviewer for domain's console
#vncpasswd='password' # set password for domain's VNC console
memory = '256'
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
########### You shouldn't have to edit anything below here ##############
import os
import sys
# Assemble the basepath
file = os.getcwd() + '/' + sys.argv[2]
basepath = os.path.dirname(os.path.abspath(file))
datatarball = basepath + '/disks/data/data.xen.tgz'
builder = "hvm"
hvmfiles = [
'/usr/lib/xen/boot/hvmloader',
'/usr/lib/xen-ioemu-3.0/boot/hvmloader'
devfiles = [
'/usr/lib/xen/bin/qemu-dm',
'/usr/lib/xen-ioemu-3.0/bin/qemu-dm'
# Check to see if the user has assigned custom HVM or device_model paths
try:
hvmfiles.insert(hvm_path,0)
except NameError:
pass
try:
devfiles.insert(devmodel_path,0)
except NameError:
pass
# Choose the appropriate HVM Loader
for i in hvmfiles:
if os.path.exists(i):
kernel = i
break
# Choose the appropriate Device Models
for i in devfiles:
if os.path.exists(i):
device_model = i
break
# Need to test if device_model and kernel are set, if not return with error.
# If this is the first time this has run, extract the data disk tarball
# then remove the tarball
if os.path.exists(datatarball):
os.chdir(basepath + '/disks/data')
os.system("tar -zxpf " + datatarball)
os.remove(datatarball)
# Continue normal configuration
name = "joomla15"
vif = ['type=ioemu, mac=00:16:3E:2B:1F:04, bridge=xenbr0']
disk = ['file:' + basepath + '/disks/root/root.hdd,hda,w','file:' + basepath + '/disks/data/data.xen,hdb,w']
root = "/dev/hda1 ro"
extra = "4"

Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo

Image Manager : upload image - error message String index out of range

Hello,
i'm facing an issue with the upload functionality of 'Image Manager'.
When i upload a file, systematicaly an error message pops up :
"error message String index out of range : - XXX"
Where XXX is a value as large as the size of the file.
I have the feeling that the problem may come from the installation of VC.
Did someone encountered this issue ?
Thank you

Hi,
Plz check the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
Govindu

Web Analysis report error : Array Index out of range :1

while running from workspace , below error is being thrown after making few changes to the layout (e.g. moving Measures from Page to Row ) though Design for HTML setting applied.
Array Index out of range :1
These reports are running well in WA studio.
Can any one advise on this please.

Array index out of range: 1The only time you will get that error is when you are accessing an elements index that is not present in the actual indexes in that array

Error opening web analysis report in workspace: Array index out of range:2

I am able to view this report in web analysis studio with no errors..Its only when I go to workspace and open report do I get following error: Array index out of range:2.
Any suggestions?

Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

Error "String index out of range:6" while opening Webi fromBI java Lauchpad

Dear All,
I have installed BO 4.0 recently. When I open BI Java Lauch Pad URL I can see Web Intelligence under the applications list. When I click it, a pop up getting opened with message " String index out of range: 6" When I click "Details" icon in the pop up, it is showing this description.
Detected from bootclasspath: C:
PROGRA~1
Java
jre7
lib
deploy.jar
Java Plug-in 10.0.0.147
Using JRE version 1.7.0-b147 Java HotSpot(TM) Client VM
User home directory = C:\Users\RT89363
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
I have tried this in a machine where i logged as a normal user. But when i open the same link from a machine where i logged as administrator, it is working fine.
Could any one help me in sorting out the issue ??
Thanks in advance.
Regards
Ravi.

Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo

Error executing CFC. Parameter index out of range (2 number of parameters, which is 1)

Hi,
My CFC component is defined as:
<cffunction name="updateNote" output="false" access="remote" returntype="void" >
     <cfargument name="notedetails" required="true" type="string" >
     <cfargument name="notename" required="true" type="string" />
     <cfquery name="qupdateNote" datasource="notes_db">
           UPDATE
               notes
           SET
               notes.notedetails=<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notedetails#">,
           WHERE
               notename="<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notename#">"
    </cfquery>
</cffunction>
In Flash builder when I test the operation I get this error:
"There was an error while invoking the operation. Check your server settings and try invoking the operation again.
Reason: Server error Unable to invoke CFC - Error Executing Database Query. Parameter index out of range (2 > number of parameters, which is 1)."
Im really quessing that this is something small but right now its causing me to pull my hair out of my head!! Argg. Tried a bunch of things but I know thik im stuck.
Help would be very very appreciated.
Thanks

Create test.cfm along these lines:
<cfset myObj = createObject("component", "dotted.path.to.cfc.file")>
<cfset myResult = myObj.myMethod(arg=value1, etc)>
<cfdump var="#myResult#">
Or, really, you could just browse to this:
http://your.domain/path/to/your.cfc?method=yourMethod&arg1=value1 [etc]
Although I dunno which of those two approachs will give you a better error message (indeed, it might be the same).
Try both.
Adam

Error Mapping XI: String index out of range.

Hi Experts,
I have a problem with the mapping in XI. The transformation of data is very complex (see below) for field HBKID. I'm not having understanding the process of mapping is performed for the field HBKID. The creation of the transformation was performed using the graphical method for mapping in XI for this case. I think the person who created this data transformation didn't know that could be used USER DEFINED FUNCTION. Could you explain in more detail this MAPPING?
In the test displays the message: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns1:ZSD000TF01/ZVBAP/item[2]/HBKID.
The message is: Exception:java.lang.StringIndexOutOfBoundsException: String index out of range: 3]
Edited by: Rafael Sá on Feb 9, 2010 10:40 PM

Hi Experts,
So, I've done several tests on the tab of tests with various XML and I can't understand reason of the error in MAPPING.
I'll detail a little more the problem:
The processing of the interface is made by many items.
MAPPING ERROR:
When the interface processes a first item with the information below:
CHAVE_BANCO = EMPTY
MEIO_PGTO = D
TP_CARTAO_CREDITO = EMPTY
AND a second item with the information below:
CHAVE_BANCO = 314/3705
MEIO_PGTO = W
TP_CARTAO_CREDITO = EMPTY
The error occurs: The message is: Exception:java.lang.StringIndexOutOfBoundsException: String index out of range: 3]
MAPPING OK:
But when the processing is performed inversely, the MAPPING is done correctly.
When the interface processes a first item with the information below:
CHAVE_BANCO = 314/3705
MEIO_PGTO = W
TP_CARTAO_CREDITO = EMPTY
AND a second item with the information below:
CHAVE_BANCO = EMPTY
MEIO_PGTO = D
TP_CARTAO_CREDITO = EMPTY
I don't understand logic mapping for the field HBKID.

Submit:Validating members::Subscript Out of Range Error

Hi,
When I enter data in an Input Schedule and click "Send and Refresh Schedule" button, I receive an error message.
Submitted Records : 4
Accepted Records : 0
Rejected Records : 0
Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range
"Then the list of records not sent."
No records are sent to the database.
Why does this error occur?

Hi Karthik, Just wondering if there are too many digits(i mean too many decimals in the numbers) in the sheet.
regards
shyam

SAP HANA Model validation error - Index out of range

Similar Messages

Maybe you are looking for