/sap/hana/xs/sqlcc/ - 403 forbidden

/sap/hana/xs/sqlcc/ is blocked even for our SYSTEM user (403 forbidden), how do we gain access to it?

It just realized the URL you are using.  You are using the older sqlcc application.  That is why I thought you were on an older release.  You should be using /sap/hana/xs/admin to maintain the sqlcc entries.  You can refer to section 8.5 of the HANA Developers' Guide for more details. Although that said, I tested in my local system and the sqlcc app you are using works for me as well as the new admin tool. You might still have something wrong with the role setup, but I would certainly try the admin tool first before troubleshooting further.

Similar Messages

  • SAP ME Site Error 403 forbidden ?

    We installed SAP ME 15.0 on SAP NW 7.31 SP013. The installation on
    windows environement and the DB is MSSQL Server.
    We completed the all the installation steps and ran the CTC wizards
    successfully! But after the installation we try to open the SAP ME usingthe url : http://<host>:<port>/manufacturing/index.jsp by using
    "SITE_ADMIN" it opens the homw screen and there if we try to go for
    either of any tabs like "HOME", "SITE", "HELP" there is an error like
    "403 Forbidden" appears.
    Please find the attached screen shots()related to this
    error.
    Please help me to fix this error as early as possible! we are at middle
    of the instalation.
    Thnaks,
    Chandrababu

    Hi Janos,
    Thanks for the reply!!!, I went through the path and founf=d the assigned actions for role "SAP_ME_ADMINISTRATOR" as shown below.,
    Could you please let me is it correctly assigned or do we need to change any actions!?
    Thanks,
    Chandrababu

  • Sender AS2 to SAP PO; 403 forbidden error

    Hello Experts,
    I am using the AS2 adapter from the B2B Addon.
    I am stuck in the scenario Sender AS2 -> SAP PO; with the 403 forbidden error.
    Few queries;
    1. Is virtual receiver mandatory ?
    2. Is is mandatory to have party for sender and receiver. Currently I am having only Sender ( Party + Comm. Component ) and Receiver ( Comm. Component ( Partner Type = LS )).
    Can you help please.
    Thanks
    Saurabh

    Hi Harish,
    Thanks for your quick response.
    I have configured with the following details :
    Sender Party : ABC  ( 009 | GLN | 333333333 )
    Sender Component : DEF
    Receiver Party : PQR ( 009 | GLN | 111111111 )
    Receiver Component : XYZ
    Sender AS2 adapter :
    Expected URL : http://10.194.35.20:8080/as2/HttpReceiver
    Message ID Left : .*
    Message ID Right : .*
    Sender AS2 name : 333333333
    Receivers AS2 name : 111111111
    Expected subject : AS2 message
    Partners in Mendelson  :
    Partner 1 :
    ( Local station )
    1. Name : Mendelson_AS2
    2. AS2 ID : 333333333
    3. Email : [email protected]
    MDN tab : http://<Mendelson desktop PC IP>:8080/as2/HttpReceiver
    Parnter 2 :
    1. Name : PQR
    2. AS2 ID : 111111111
    3. Email : [email protected]
    Receipt URL : http://<PI-Host>:<PI-PORT>/AS2/.*
    Payload subject : AS2 message
    Error details :
    [10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Transmission failed, remote AS2 server reports "Forbidden".
    [10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: HTTP 403
    [10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Message payload stored to

  • SAP B1ip detected an error : 403 Forbidden

    Hello, I recently installed SAP B1 8.81 PL09, and the standalone B1 integration component. I followed the installation guide perfectly, and still receive an error whenever I try to use my dashboards, or open the integration framework.
    I installed on my iPad app version 1.4.0.
    When I try to connect to the server b1ic, with a sniffer http on port 8080 I get the following error :
    SAP B1iP detected an error:
    Emitted HTTP-Code
    403 - Forbidden
    All configurations on the client side app and sap are correct.

    hi,
    please check this NOTE: 1495563 - [SAP Business One Integration component troubleshooting|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303134393535363326]
    regards,
    Fidel

  • When I login to my bank, I get the message: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. Have new MacBook Air with Yosemite. How to solve this problem?

    When I try to login to the website of my bank, I get the following error message:
    403 - Forbidden: Access is denied.
    You do not have permission to view this directory or page using the credentials that you supplied.
    I have a new MacBook Air with OS Yosemite installed.
    What is the problem and how can I solve it?

    Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
    Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
    The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
    Back up all data.
    Double-click anywhere in the line below on this page to select it:
    com.apple.idms.appleid.prd
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
    Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
    The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
    Credit for this idea to Christian Braukmueller of SAP.

  • Web Dynpro Application - HTTP 403 - Forbidden

    Hi All,
    We have created one application in Dev. environment. And it is working fine here.
    But when we transport it to the QA system, we are getting 403 forbidden error.
    What has happened?
    URL http://<server name>:8000/sap/bc/webdynpro/sap/ZGFS_JEWD/ call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system FQ3 with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:lnxeccq1_FQ3_00-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    Any help would be appriciated.
    TIA
    Amit
    Edited by: Amit on Feb 1, 2010 2:38 PM

    Hi,
    When  you transport your WebDynPro App to QA system or even Production, you need to manuallly activate the Service in transaction SICF.
    goto SICF, execute for Hierarchy Type: "SERVICE"  --> default_host->sap->bc->webdynpro->sap->
    look for your Application Name here & right clik & Activate it.
    your application will work fine then.
    PS: If you donot have the authorization, have someone from Basis activate the Service.
    Thanks,
    Phani
    Edited by: Phani Rajesh Mullapudi on Feb 1, 2010 7:36 PM

  • 403   Forbidden error in RWB in the message content Tab

    Hi
    I am getting a 403   Forbidden errorn the page when I go to the Message content age in RWB while viewing the messages in AE .
    Does any one know why is this error comming. I have chakd the roles of the system user and they ar fine.
    Regards
    Nikhil

    Check thie troubleshooting guide and press CTRL + F to find string 403.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Regards,
    ravi

  • PI 7.1/RWB/Component/Monitoring/Adapter Engine/Test Message/403 Forbidden

    Hello guys!
    During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
    After processing i receive following error:
    Error while sending message: 403 Forbidden.
    Does anybody know the cause?
    Many thanks in advance!
    Jochen

    Hi Sreeni!
    Direct hit!
    This was the problem! Missing role!
    Many thanks to you!
    Additional Information for all:
    Readiness Check (PDF)
    A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
    Page 44
    SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
    Regards,
    Jochen

  • PI 7.0 u2019Message Monotoringu2019  messages content 403 forbidden

    Hi
    After appling SPS 23 we do get this  error when acsessing "messages content" in RWB u2019Message Monotoringu2019 ,
    Service cannot be reached
    What has happened?
    URL http://srvsappid1hq.iccompanys.net:8011/sap/bc/gui/sap/its/webgui/! call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system PID with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SRVSAPPID1HQ_PID_11-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team

    Hi,
    Ref: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi 
    Thanks,

  • HTTP connection to ABAP Runtime failed. Error: 403 Forbidden

    Hi ALL
    We where testing our scenario using the Test Configuration in Integration Engine.
    We have come across the following error in the second step of Determining the receiver.Here is the error message we received...
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: _http://SAPXDV01.sap.client1.local:8000/sap/xi/simulation?sap-client=150 User: PIDIRUSER
    Please, do let us know ... if you have received similar error & what solution can be applied...
    Your help is greatly appreciated!
    Thank you,
    Patrick

    Hi,
    Go through this thread...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0f00c890-0201-0010-beb2-c96050edc426
    JCO_COMMUNICATION_FAILURE
    Error in XI server: JCO_COMMUNICATION_FAILURE in Message Mapping
    This might help you..
    Regards,
    Divya

  • WSRM messages stuck in PI with HTTP code:403 forbidden

    Hi Guys,
    We have interface from FILE to WS where file is being sent from third party system to ECC in which we are facing issue.
    This service uses HTTPS protocol and while creating the binding in ECC SOAMANAGER we have used communication security as "SSL over HTTP" whereelse in HTTP portocol "none" is selected.
    I have tested the wsdl url in browser and is working fine but while sending the message it throwing HTTP code: 403 forbidden error.
    Can you help me to resolve this issue?
    Thanks
    Aki

    HI,
      I have tested the wsdl url in browser and is working fine but while sending the message it throwing HTTP code: 403 forbidden error.
      Can you help me to resolve this issue?
         HTTP code: 403 forbidden error might occur The server understood the request, but is refusing to fulfill it
         Path sap/xi/engine not active
                 u2022 HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
                 u2022 Because of Inactive Services in ICF u2013Go to SICF transaction and activate the services. Refer SAP Note -517484
                 u2022 Error in RWB/Message Monitoring- because of J2EE roles u2013 Refer SAP Note -796726
                u2022 Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. u2013Because of the URL is incorrect or the adapter is not              correctly deployed.
    regards,
    ganesh.

  • SEEBURGER AS2: 403 Forbidden #

    Hi ALL
    We are encountering the following error  for SEEBURGER AS2: 403 Forbidden # .... while the vendor is trying to send a file thru AS2 adapter.
    Please, let us know if you a have encountered this problem and have a solution to fix it.....
    Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 403 Forbidden # , SEEBURGER AS2: 403 Forbidden # : javax.resource.ResourceException:
    We did check on the following ( all of the below have been validated in our scenario):
    a) You or your partner has entered an incorrect AS2 ID for
    b) A valid sender agreement is missing. c) There are more then one AS2 sender agreements with the
    d) The corresponding inbound channel is set to inactive.
    Your help is greatly appreciated!!
    Thank you,
    Patrick

    Hi Patrick,
    Reason might be any one of the following.Please go through into them once again.
    1. You or your partner has entered an incorrect AS2 ID
    - Please check the AS2ID's very clearly. The ID's are case sensitive.Make sure you and your partner has entered exactly the same AS2ID in the configuration.
    2. A valid sender agreement is missing.
    You need to select Virtual receiver in the sender agreement and provide your receiver party and service name as well. This is very important for identifying the AS2 ID's.
    3. There are more then one AS2 sender agreements.
    Make sure that you created only one sender agreement for your sender and receiver party. Your business service may change but make sure you have created only one sender agreement for your sender and receiver party.
    4. The corresponding inbound channel is set to inactive.
        Make sure your channel is active.
    lemme know once you check.
    Thanks
    Deepthi.

  • Invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden

    Boa tarde Srs,
    Estamos sem comunicação com todas as secretarias da fazenda no nosso ambiente produtivo. O XML de erro é o seguinte.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Verifiquei algumas configurações, de acordo com outras theads dos foruns mas não consegui solução (transação /nsicf, canais de comunicação etc).
    Nenhuma modificação está sendo feita no servidor, parou de funcionar hoje as 14 horas.
    Alguem já passou por problema semelhante?

    Andre,
    Se não foi alteração de infraestrutura (proxy, firewall, etc), pode ser o Certificado Digital utilizado na autenticação com a SEFAZ (client certificate).
    O erro seria HTTP 403.7 se não me engano, mas acho que vale verificar no Visual Admin a validade do Certificado Digital, Assim como verificar junto ao pessoal de infra se foi alterado algo ref. a proxy, etc.
    PS: A interface de assinatura digital funciona?
    []'s

  • System Landscape Directory: HTTP response code: 403 (Forbidden)

    Hi,
    After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
    between PI and SLD is not working:
    1) error in RWB -
    Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
    2) another error:      
    8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
    3) in the sld:
    INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
    sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
    Any idea ?
    Dimitry Haritonov

    Hi Venu,
    thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
    Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
    The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
    the reason is unknown ... any idea ?
    Dimitry Haritonov

  • Web service error message ' Invalid Response Code: (403) Forbidden'

    Hi Experts,
    I created a webservice, and it working fine in Development and Quality systems. But it is not working in Production system. When trying to click on 'Open Web Service navigator for selected binding' for testing it's giving the following error message.
    Cannot download WSDL from http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120: Invalid Response Code: (403) Forbidden. The requested URL was:"http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120"
    Please suggest me any solution.
    Thanks
    Lakshminarayana

    Hi Lakshminarayana,
    there may be lots of reasons.
    [http://lmgtfy.com/?q=http%20%2B%20403]
    Regards, Hubert

Maybe you are looking for