SAP HCM Module - Deleted PERNER in R/3 not reflected in BI

Hi All,
         I am working in HCM Module, where most the loads used are full loads. I am facing one problem that whenever a PERNER is deleted from R/3 , it does not get reflected in BI (0EMPLOYEE) i.e the deleted employee still remains in BI as the load is full, to avoid this I had to refresh the entire transaction & master data & again reload the data so that the deleted PERNER does not appear,  this process is very time consuming.
Are there any alternative available to avoid this issue?..is any flag gets maintained in table when a PERNER is deleted from R/3?..
Kindly help.....
Thanks & Regards
Indraneel

I have seen this question surface several times in SDN. 
PERNR's should not be deleted from the R/3 system but rather delimited and "deactivated" by a personnel action so that their employment status shows up as Inactive with the delimited time period.  Then they come over into BW as Inactive and usually will not show up on any more staffing reports unless the users are looking for Inactive employees.  This is a best practice in the R/3 system. 
Otherwise, you are stuck with drops/reloads of the Data Target and Master Data (if possible).  However, 0EMPLOYEE is used everywhere in the HR content in BI so it's difficult to clean up the master data after the employee has been loaded since the SID would get tied up in all the data targets that have the data for that employee.
Hope this helps!

Similar Messages

  • To implement SAP HCM module in existing SAP ECC 6.0

    Hi,
    I have SAP ECC 6.0 system already implemented 2 years back.
    I am planning to implement SAP HCM with OM, PA, SAP Time management, SAP PAYROLL in existing SAP ECC 6.0 system.
    I have currently 3 system landscape for SAP ECC.
    I would like to know what change/addition is required in above landscape to implement SAP HCM module in existing SAP ECC 6.0
    Do share your view.
    Regards.

    Hi.
    As per you, Already designed Landscape. Why dont you follow you existing Landscape which is alredy proved for other modules.
    Normally Dev/Quality/Production clients will there..
    If more that depends upon flexibility in Each client and defining different business for testing and production interfaces purpose.
    Better use Existing only remaining modules already sucessfully running in Production Right????

  • Deleted records in R/3 not reflected in BW

    Hi All,
        If a particular record is deleted in R/3 how would that reflect in BW ?
    Regards,
    Madhavi

    Hi,
    in case of a ods, it is as Ravi mentioned. You can see the record in the change log, with a before/after image recordmode, setting the value of the keyfigures to 0.
    In case of a cube, you can see the record in transaction listcube if you add the request id to the output of the transaction. There you will see two records, the original one and the deletion with inverted keyfigures which sum up to 0.
    regards
    Siggi

  • AOL: deleted mail on laptop is not reflected in iTouch mail

    My wife will read HER AOL e-mail on her iTouch when she is out at the office. Then later when she is home she will read her AOL e-mail via her MacBook and THEN delete messages from AOL via her main account. Yet, when she updates the mail on her iTouch the list of e-mails visible on the iTouch does not change (sync?) to reflect the deletions that she made on her MacBook. Plus it says she has something like nearly 100 messages to download?!?
    I have set-up my sbcglobal account to remove e-mails from their server ONLY when it is downloaded onto my G4 at home - all other remotely accessed e-mail stays on the server until such time as I read those saved e-mails from home and then they are expunged but saved on my computer at home. I assume there is a similar setting for AOL: that is - keep everything on their server but only REMOVE it from their server when it is downloaded at home.
    Or is this more of a fundamental set-up issue with the mail account on the iTouch?

    You are correct in assuming that you can set the iPod to leave messages on the server. I do it all of the time.
    To change the e-mail settings got to Settings > Mail, Contacts, Calendars > Account Name > Advanced. You will see a setting "Delete from server" option that you can set to what you need.
    This is correct as long as you are dealing with a pop account. If AOL mail is imap, then deleting items on the touch results in inbox items being deleted on the server.
    Mail syncing on the touch via iTunes does not sync messages, however. Your wife will have to delete messages on her touch after she reads them. The only way around this, at least currently, is to use Apple's Mobile Me system.

  • Logic for Deletion of a row is not reflecting in DEV instance

    Hi ,
    I have a method in AM attached to a Search screen which has logic to delete rows from 3 different VOs.
    1. VO for selecting the rows from Details table.
    2. VO for selecting the rows from Master table.
    3. VO for holding the rows of results tables.
    The results table displays rows from both master table and details table. On selecting a row for delete in results table , the remove() method is being called to remove rows from the three VOs in the same order mentioned above.
    This logic works perfectly in my local setup. The commit was initially not getting recognized. So , we included the line "JDBC\:processEscapes=true" after which delete and commit started working fine in my local setup.
    But the same code does not work in the DEV instance. Can anyone please suggest what can be done in such a case.
    Thanks,
    Chandrika

    Thanks for your reply,
    As we did registration again now for the problematic server autoreaction method is now visible in RZ20
    But it is not picking up the alert for the scenarios. Also found other 2 server is also giving error while connection test below is screen shot.
    I checked the log file. Foundthe agent lock is not getting updated.
    and error log details
    [Thr 4396]
    Fri Jun 27 08:12:44 2014
    INFO: Register central system PSM.
    INFO: Register central system: System PSM already registered as central system. Trying to update...
    ERROR: Register central system: cannot stop agent, because the agent is restarting.
    Fri Jun 27 08:44:56 2014
    INFO: Unregister central system PSM.
    ERROR: Unregister central system: cannot stop agent, because the agent is restarting.
    [Thr 7084]
    Fri Jun 27 08:52:07 2014
    INFO: Register central system PSM.
    INFO: Register central system: System PSM already registered as central system. Trying to update...
    ERROR: Register central system: cannot stop agent, because the agent is restarting.
    Can you please check and let me know the fix to resolve the error.

  • Single-sourcing: Deleted content in FM source not reflected in RH update

    I discovered today that, when I delete content in my linked FM source, the same content is not deleted or even marked as 'changed' or anything in the RH update!
    In one situation, I deleted an entire chapter but the topic wasn't deleted.
    In another, I deleted a section of a chapter, but the section wasn't deleted from the topic. In both cases, I saved the changes in FM before running the update in RH.
    Is this a known but undocumented feature? Did I miss a setting somewhere? Is there a fix or update?
    It pretty much invalidates the whole purpose of 'linking and updating.' 
    Win 7, TC3.

    Bizarre. With another linked book, the deleted FM content was deleted from the RH project. I can't figure out why it worked with one book and not the other.

  • Deleting ruleset in content group not reflecting on storefront

    We have a content group with a product set in it. Its working fine a product on storefornt.
    We are trying to delete the ruleset so that no product should appear in the storefornt.
    We deleted the ruleset and deployed the project. But, still the product is displayed in the storefront.
    We checked the .properties file of the CG and it has no ruleset.
    We checked the CG component in the prod dyn/admin. But the 'rules' property of the CG has the previous rule still set in it.
    Now we restarted the prod server. The product now doesn't appear in the storefront and the rules property in the CG is set to null as well.
    Why is it that the CG doesn't reflect changes when we empty the rules in CG and deploy it?
    Thanks,
    Ashish

    Hi,
    Can you please explain (without resorting to technicalities) what are you trying to accomplish..? Not populating the Installment plan positions with Installment plan number, I hope..? What document number needs to go into positions of which document?
    cheers
    Jānis

  • PI 7.1 enterprise services: How to find & invoke SAP HCM enterprise Service

    Hi all,
    in PI 7.1, i read, there is support of enterprice services.
    is my current understandings right about PI 7.1 and enterprise services:
    1.the standard BAPIs, standard RFC that were provided in R/3 are replaced by standard enterprise services in SAP ECC.
    2.a nonSAP application can invoke an enterprise service in the same way as a nonSAP application used to call an RFC in the R/3.
    I want to view how an enterprise service of any SAP module can be called by a nonSAP applicaiton.
    are there any doc or blog which shows this.
    is possible with/wihout PI.
    We have follwoing things installed.
    1. PI 7.1 SP4.
    2. SAP ECC 6.0, i am dealing with SAP HCM module.
    are there any enterprise services of HCM available (e.g standard enterprise services given by SAP for HCM module).
    basically i want to test whether a nonSAP application like a java application, can it get some info using standard HCM enterprise services provided by SAP.
    I explored esWorkplace (http://www.sdn.sap.com/irj/sdn/esworkplace), but it does not display HCM related process components under the column "DISCOVER ENTERPRISE SERVICES".
    thanks,
    Madhu.

    Hi Madhu,
       YOu can check this page for simple sample applications for enterprise services consumption:
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=EBF08FD8067241F787448B3EB87DA04E
    Check this page for ERP-HCM
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=C6AE1E905D8E11DA36BB000F20DAC9EF
    and complete business map here:
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=13C98C60080711DA1503000BCDDC2565&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
    Regards,
    Ravi

  • Post Work Exp of 8 yrs+ in HR and now Career in SAP HCM Functional Consultant

    Dear Respected Members,
    Myself Abhinav Chandra , having a PG Degree in HR and a work experience of 8 yrs plus in HR Domain . At presently, I am associated as as Manager - Human Resources with India's 2nd largest Steel Manufacturing organization . My organization is planning to implement SAP HCM module in this May 2015 and I am designated with the responsibility for its implementation in my organization .
    Pursuing a career in SAP HCM was always my dream since 3 yrs when had a refresher training in SAP HCM domain in 2012 . Now my question is if after gaining a SAP HCM Implementation experience and a SAP Certification with core HR exp of 8 yrs , how will it benefit in making a career move in SAP.
    Request you all kindly update with your desired suggestions.
    Thanks and Regards
    Abhinav Chandra

    Hi Abhinav,
    First I am very glad to hear that you have sound domain knowldge in HR. So for a person like you SAP Implementation experience will be fantastic advantage. Off course if you wanna do certification on SAP HCM that you can always do but for a person like you who has already sound domain knowldge if you add SAP HCM Implementation experienece in your bucket you are done.
    You know the respective HR Processes so thats a big advantage. However following steps would be good for you:
    Participate in Requirement Gathering workshop
    Participate in Design Process and finalise the design
    Try to know the SAP Configuration to some extent
    Involve in SAP HCM Process testing
    Good amount of involvement in SAP Authorisation issues as well.
    Thanks & Regards
    Subhasish

  • SAP HCM Professional Certification

    Dear Experts,
    I wanted to give a professional Certification exam for SAP HCM module, Can you help me out to find the books required for this exam.
    Please guide me......
    Thanks
    Swapnil

    Hi,
    Siemens meterial is enough for preparation.
    Sairam.

  • SAP HCM stand alone product

    Hi....I'm a SAP ABAP developer and new to SAP HCM...I want to know if is possible to implement SAP HCM module as a stand alone product without implement FI-CO modules or without having interfaces to another SAP ERP system, my client only need a HR system, they already have and are comfortable with their current systems.....Where can I found information about SAP HCM stand alone implementation if this case is achievable.
    Thanks in advance,
    Mirko.

    Thanks Rajdeep for your reponse.....we want to implement:
       - OM (Organizational Management)
       - RC (Recruitment)
       - PA (Personnel Adminitration)
       - PT (Time Management)
       - PY (Payroll)
    Beside Company code, what another mandatory things are necessary configure?.....Can they be for FI: Business area, the G/L accounts for payroll? and for CO: CO area, cost center?
    Greetings and thanxs in advance.
    Alfredo.

  • SAP HCM Or Oracle HCM Module - Certification

    Hi,
    I always wanted to ask the expert before I take a jump on my career, can any one please help me. To give you a little back ground on my profile, before I ask the Golden Question. I am currently not working and have a solid 3 + Years of Exp in Recruitment and post recruitment.
    Which is the best certification SAP HCM or Oracle HCM Module?
    Can any one answer the above question with lot of data keeping the current MARKET Condition?
    I have been asking lot of people on this subject, most of them are not able to give me the proper information. Awaiting your expert advice.
    Warm Regards,
    Zulfikarlos

    Hi,
    Go for SAP HCM. Eventhough Oracle is taking over many companies, SAP still prevails.
    My suggestion is that, first you try to get a job in your domain. It's better if you join a company who practices SAP. So that, you can have first hand experience on the SAP HCM/HR.
    Then try doing the Certification.
    You would have taken certification, if you were a fresher. As such you have 3+ years exp.
    Generally for any job opportunity, employer will look for the candidate who is currently working if he is not a fresher.
    While you working you can get certification with eLearning. Now so many institutions are offering this. Also, the fees is 50% less.
    All the best.
    Madhava

  • Obsolete / Out dated Transaction Codes list in SAP HR / HCM Module

    Hi Experts,
    Please let me know the Obsolete / Out dated Transaction Codes list in SAP HR / HCM Module.
    Thanks in advance.
    Samanvita.

    Hi
    Thanks for your reply. I know the concept of Obsolete Positions.
    what I want is the list of Transaction Codes which are out dated / Obsolete due to release of new versions by SAP.
    Any Transaction Codes are out dated in SAP HR Module, or SAP came up with new Transaction Codes with (same + extra functionality), so that we can use the new Transaction Codes. 
    Example: SE16, SE16N
    Please let me know those Transaction Codes.
    Regards
    Samanvita

  • Help in getting into SAP HCM

    Hi All,
            I am very new to this community. I was earlier working as a SAP ABAP HR consultant. 6 months Back I did my certification in SAP HCM ECC 6.0 and started working as a techno functional consultant. To explore my self in this new dimension I need guidance in HR functional ground. I would request here to provide me your valuable suggestions how to approach. Also I request all of you to please share with me relevant documents/videos, if any. Materials (i am having certification materials) relevant to any SAP HCM sub modules would be of great help though I am currently working in payroll. my personal email id is deleted
    Thanks & Regards,
    Chandra

    You know, asking for documentation and material isn't permitted on these forums.  It's probably a good idea to check out the rules before beginning any new project.
    what do you think?
    matt

  • SAP HCM Business analyst Support role Interview Questions and answers required..

    Hello Experts,
    I have applied for the role Business Analyst supporting SAP HR and GB Payroll. I need to prepare for the interview.
    I would like to have any material or link with regards to issues/tickets raised for SAP HCM /payroll. my email ID [email protected]
    Could you please provide me Interview Questions and answers for SAP HCM and Payoll support.
    Thanks in Advance
    Regards
    Nivedita

    we can not assume any interview questions .better you can search in google.if your in supporting then you should be able to rectivie the day tod day issues and the change request. for this you should have all modules experince to answer the interview questions. all the questions will be the real time and the process  real time scenario kind of questions.
    For the GB payrol,. look at all statutory deduction and payment like payee tax and the NI-(National insurenve) deduction. and also the returns (monthly anualy). and also the config of SSP (statutory sick pay )and SMP (Statutory Maternity Pay), factoring process , retro, posting and automatic file transfer to HMRC,etc.

Maybe you are looking for