SAP help for release-dependent modifications

Hi,
I like to know the addition features of ABAP depending on the Version. I know you can find them in the SE80 using the F1-help. Unfortuantely I don't have a system with current release level available at the moment.
Is there another possibility to access this F1-help provided within the ABAP-Editor in order to receive all necessary information on release updates.
Thanks in advance for your help
kind regards
Torsten

Thanks, but I have looked already in the release notes as well as in the SAP NW Developer guide.
I could not find the ABAP f1-help for the command which might in clude the release changes. Does anybody have an idea where to find it.
Bye
Torsten

Similar Messages

Search Help for KUNNR, depending on a certain BUKRS

Hy gurus,
I have the following selection-screen
PARAMETERS : p_bukrs LIKE bsid-bukrs OBLIGATORY.
SELECT-OPTIONS: s_kunnr FOR bsid-kunnr.
I'd like to make the search help of KUNNR dependable on the
input of p_bukrs.
I don't want to create any self/made search help ,I need to use the standard one.
F4IF_INT_TABLE_VALUE_REQUEST doesn't seem to be proper to my purpose...
Thanx
Christian

Use SE11> select search help exit radio button> enter DEBI and display--> in the definition tab u can see this.
Please see this link for overview
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
a®

Sap help for CRM

Hi
Can anybody help me in navigating to online CRM help from help.sap.com site ??
Regards
kumr

Hi
u can know about the Documentation for SAP in http://help.sap.com/ in that go toSAP Business One
U can also know abt the Best Practices etc
if u want to go the help portal directly
check this
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Reward points if helpful
Cheers
Manohar

SAP HELP for CPM?

Hi Folks,
I am trying to keep up with pace in CPM area of SAP.Are there any docs available for SAP CPM suite(BPC,SM etc) in help site? Any inpuits will be greatly appreciated.Thanks.
-Guru

No the CPM related documentation is not yet on http://help.sap.com. But perhaps you can checkout some of the CPM links I've compiled on my community page. It can be found at the following URL:
https://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman
Best regards,
Jeff Holdeman

SAP Help for Wide-Screens.

Hi All,
I have a <b>wide screen laptop</b> and I am connected to a SAP Server. Whenever I click F1 for help it only shows me blank help screen. However when I try the same thing in a desktop or a normal screen laptop it works fine.
Please Help

Thanks

SAP help for Logistics Customizing Cockpit

Hi Friends
Greetings...
I want to read complete scenario for BW extraction, I want to know LIS, and LO concept, Central Delta Managemen, Set up tables, why we need MCstructures if we have LIS structures etc.,
I'm trying to search in "help.sap.com" but couldn't find i got only "customizing extractors" in BW help, but couldn't find complete scenario of LO and LIS. I have 350 extraction material, but still i want to read from help.sap.com also. kindly help me to get this site
bye
lasya

Hi,
Step by Step for LIS Extraction
LIS EXTRACTION
T.code - :MC18 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc.
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog
Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 create infostructure
Infostructure : S789
Application 01
Choose characteristic select the catalog, select the fields, copy + close
Choose key figures catalog select the key figures ,copy + close, save and generate
T.code MC24 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter
Select the key figures click on rules for key figures give suggest rules, copy save and generate
Click on updating (activate updating)
Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period
Updating 1)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code LBW0 - Connection of LIS Information structures to SAPBW
Information structure : S786
Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute
Select the radio button -Activate / deactivate and Execute.
T.code SBIW Display IMG (implementation guide)
Setting for applications specific data source logistics Managing transfer information structure setup of statistical data applications specific setup of statistical data perform statistical setup sales.
Choose activity
Setup Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code RSA3 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records
Go to BW side replicate data source Assign infosource Create infocube Create update rules create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code MC25, set update (V1) or (V2) or (V3)
T.code LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side - create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
3.Modules:
SD,MM, PP,QM..
4. Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables SnnnBIW1, SnnnBIW2 and the structure SnnnBIWS and the InfoStructure itself Snnn
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure SnnnnBIWC is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table TMCBIW. Within transaction SE16 youll see, that for your particular InfoStructure the field BIW active has the value X and the field BIW status is filled with value 1 (refers to table SnnnBIW1).
The orgininal LIS update program RMCX#### will be enhanced within the form routines form Snnnbiw1_update_.... and form Snnnbiw2_update
With the transaction SE38 youll see at the end of the program [starting at line 870 / 1006], that the program is enhanced within a BIW delta update coding
Within the flag Activate/Deactivate the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table TMCBIW is defined, which table is active for delta update.
check LO also
LO
rgds,
raj
Message was edited by:
gangaraju mullapudi

Links for tutorials and SAP Help

Dear Moderators,
Can you please provide us urls for useful tutorials and SAP help for developing the crystal reports and deployment. What is the infrastructure required for the development and deployment.
Thanks!
Surya.

Hello Surya,
I'm assuming from the context of your question that you're interesting in integrating Crystal Report to SAP - in the BI or reporting off of BW Queries.
This is certainly possible via the "SAP Integration Kit" offered with BusinessObjects Enterprise. Active discussion concerning the "SAP Integration Kit" and creating Crystal Reports can be found in the Business Objects forum:
[https://www.sdn.sap.com/irj/sdn/businessobjects-forums|https://www.sdn.sap.com/irj/sdn/businessobjects-forums]
There's a "SAP Integration Java SDK" that allow web developers using BusinessObjects Enterprise Java SDK to develop web applications to interact with BW Queries in Crystal Report with SAP:
[http://support.businessobjects.com/documentation/product_guides/boexir2/en/BusinessObjects_SAP_JavaSDK.pdf|http://support.businessobjects.com/documentation/product_guides/boexir2/en/BusinessObjects_SAP_JavaSDK.pdf]
This forum is for discussions for Java SDK development outside of BusinessObjects Enterprise and SAP Integration. The Java Reporting Component won't allow you to create or view reports if they're reporting off of BW queries.
Questions concerning the SAP Integration Kit is best asked in the "Business Objects" forums, and questions concerning the SAP Integration Java SDK is best asked in the "Business Objects SDK -> Java Development - Business Objects Enterprise" forums.
Sincerely,
Ted Ueda

Need Help For Sap Insurance Presentation

Dear Friends,
I am a Technical person and i want to give a Presentation on 'SAP Insurance - Collection and Disbursements '.I have gone through Sap help for SAP Insurance but am not getting what should be my material for Presentation. Being A technical person not able to understand WHAT SHOULD BE THE CONTENTS OF PRESENTATION i:e should it be more of Technical or Functional.
Please help me and Guide me for the Contents from a Functional Point of view, as i will be giving presentation to My Seniors.
Thanks and Regards,
Ashwini

I do not understand presentation in terms of collection and disbursement you mean from the business side of things or will i say looking at it from a business analyst perspective. I have some info if you can send an email add then i will send something which might be helpful though i am not sure, I myself i am just moving into such area as a SAP Business Analyst for Claims managment though i have an insurance background of another ERP so i might be able to help.

BI Overview SAP course for NW2004s ? (BI 7.0)

Hi,
Does anyone know if there is a one day BI overview (introduction) course available at SAP education for release NW2004s (BI 7.0 ?)
I found the courses SAPBI and SAPNW but these seem to be for release 3.5 ?
If not, does anyone have a one day BI 7.0 overview course in PDF or PPT format ?
thx
Message was edited by:
Double U

Couple of months ago I took two courses at SAP on upgrade to BI 7.0, there was a 2 day course, DBW70E covering Enterprise Data Warehousing and a 3 day course, DBW70R, on Reporting, Query & Analysis.
These are delta courses, covering what has changed / added.

SAP HELP Library

is there anyway to download only the SAP Library for SAP 4.6c?
or is it available in PDF Format? for example SAP Help for MM?

Go to the Below Link and Click on Down load Steps to Configure SAP Help Library
http://www.sap-img.com/b1002.htm
Regards,
Ashok

Downloading SAP-Help

Well, perhaps it is a repost, but I searched the forum and didn't find a suitable thread.
In the past I downloaded some PDF-Files from SDN, SAP-Help and so on, for example the "SAP NetWeaver Developers Guide - Running an Enterprise Portal" (Mai 2006). It includes all the chapter content from SAP-Help.
So I can search in the PDF and I have it full text indexed with some other Guides. As another point I can read it offline in train and at a customer, were I don't have access to the internet.
During the last months I recognized that many PDF documents become older and older but I cannot find new versions of it. So does anyone know a suitable resource to find these guides (extracts from Sap-Help) or does anyone have a trick how to create a PDF or something similar from Help-Entries?
I already tried out some web-page download tools, but they all haven't worked as I want: no pics, download of first level only or download of really toooo much(!) contet. I don't want to install the complete Help-Entries on my notebook, because Disk-Space is low and I only need some extracts (for example the chapter Running an Enterprise Portal).
Perhaps there will be a "create PDF"-function as it is at SAP-notes? Does anyone have informations if there is something like this planned?
Best regards,
Christian

The link was not completely useful.
There aren't many PDFs online at the moment, download with a web capture tool doesn't work at me (I tried really a lot tools) and I don't want to install the complete SAP-Help for NetWeaver from the Installation DVDs (more than 2 GB, I think).
Sorry for double post, but I am missing a move thread function
Next time I will look in all boards if there is a suitable forum.
How can I close a thread??

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

SAP Adaptor for Oracle Installation Help

Hi,
I am newbie, I am looking for help in installing SAP Adaptor for Oracle.
My Idea is to do some RFC calls to fetch data from SAP into Oracle database. I am looking for what is my starting points, what to install and configurations. If you can help me with steps to be followed is really Appreciative. I tried to search in Oracle Forums, I guess I am not able to come up with correct tags. It may be a long explanation and may be people asked this question before. If you give me links to read is good enough.
Following is My platform:
Oracle:
I have Oracle 10G and 11 versions. Right now I have my infrastructer ready for 10G. If I install SAP Adaptor and get things running according to what I need, and tomorrow if I upgrade Oracle to 11 version, What all the things that I Upgrade?
Operating System:
Unix AIX 5.3
SAP:
ECC 6
Thanks In Advance,
Raj Murthy(Bhavaraju)

Hello,
Right now I have my infrastructer ready for 10G. If I install SAP Adaptor and get things running according to what I need, and tomorrow if I upgrade Oracle to 11 version, What all the things that I Upgrade?About all the topics relatives to SAP, you should ask them (to SAP support service) the question. For instance, is Oracle 11.2 certified for SAP ECC6 ? Or would you have to wait for a later release or patch from SAP ?
Only SAP could answer you for their own product and matrix compatibility / certification.
Best regards,
Jean-Valentin

SEARCH HELP FOR STANDARD SAP DATA ELEMENT AFNAM

Hello All,
Is there any possibility for adding a search help for the standard SAP field AFNAM.
Thanks in Advance!
Ashish

Hi Ashish,
You can APPEND your own search help to an SAP field that has search help defined. This is similar to APPENDing fields to an SAP table.
You can also attach the search help to a field on a screen, i.e. limit the scope to that single screen, but this would still require a modification to the system, and hence, an access key.
Hence if you want to attach search help to the standard SAP field, then you will need access key for that.
If the access key will be available then you can attach your search help to the standard SAP field.
For more reference go through the link :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3d/e53642e2a3ab04e10000000a1550b0/frameset.htm
Thanks,
Nitesh Jain

Search Help for Hierarchy Node in SAP BW 7.3

Hi Experts,
We were previously using SAP BW 7.1 system and we had a table which used to be maintained through SM30 which has a customed search help on one of the fields for a hierarchy object. And it was working perfectly.
However, one of our systems have just been migrated into 7.3 version and the above functionality is no longer working.
This is what is happening now:
- User selects a hierarchy and after selection nothing is being displayed on field on the table.
We have tried to debug this customed search help in both environments to distinguish what is wrong. We have noted that a standard function module (RRSV_IOBJ_VALUE_OUTPUT) is not behaving similarly. In 7.1 system, the C_T_DATA table is being filled whereby in the 7.3 system, it is empty.
Do you think this is the issue?
Please do advise and propose what can be done to make it work. Or any idea on how to create a new search help for a hierarchy node in 7.3?
Thanks in advance.

hi,
one more thing i will like to add here is in BW 7.3 you get a new security admin feature that allows you to make mass changes to authorizations instead of one-by-one. This can be done by cut-and-paste in a worklist, hierarchy nodes, and you can also add users to multiple analysis authorizations.
The u2018newu2019 authorizations has both the data value and hierarchy restrictions. You can still build using the u201CRSECADMINu201D transaction
Also make sure that all objects are in the TLIBG library and they will be 'shielded' during the upgrade.
regards
laksh

SAP help for release-dependent modifications

Similar Messages

Maybe you are looking for