SAP hostagent and SAP netweaver nodes not visible in WIEM

Hi,
We are implementing SAP BusinessObjects performance monitoring through
RSC. RSC SP3
We have installed SMD Agent on BOE server which forms "Managed Agent".
We have utilising existing WIEM installed in SOlution Manager.
We have installed SMD Agent on client desktop whicn forms "Managing
Agent" since Solution Manager does not have connectivity to internet
even through proxy server.
We have run configuration UI for Managing Agent which completed
successfully.
The configuration setup of Managed Agent also completed successfully.
But, as informed in the installation guide the "SAP HostAgent" and "SAP
NetWeaver" processes & nodes are not created in WIEM.\ check configuration 6.3.3 in RSC SP3 guide/
We checked connectivity & port settings and we have no issues.
Kindly suggest
Regards,
Atul

Hi Atul,
I see where the problem is coming from by analyzing the debugging logs.
When you ran the RSCSetup.bat and you were prompted for the Wily Introscope Enterprise Manager connection details and you put in:
HOSTNAME:  CPHSMAD1
PORT:      8081
This is incorrect.  That port number is the HTTP port of Wily Introscope, not the WIEM port.  You must use the WIEM port which by default is port 6001 (this port will be the same as when you log on to WIEM via the Wily Introscope Investigator client)
Please do the following to correct the problem:
1)  On the managed host (CPWBOAD1) run the RSCSETUP.BAT again.  Choose deactivate and allow the process to finish.
2)  On the managed host, uninstall the SMDAgent (with SID PRD) by running sapinst again and choose "uninstall"
3)  On the managed host reinstall the SMDAgent (RSC Diagnostic Agent) again.
4)  Confirm the new SMDAgent (PRD) service is running.  If it isnt, start it.
5)  On the managed host, run the RSCSETUP.bat again and make sure to choose the correct "Wily Introscope Enterprise Manager" port and host name (for example, CPHSMAD1 and 6001)
6)  Now on the managing host, run the RSC UI Configuration Wizard again.  The SMDAgent should appear now.
Best Regards,
Toby

Similar Messages

  • The "J2EE process table" node not visible  in the SAP MMC

    For Netweaver 7.0 - The "J2EE process table" node not visible  in the SAP MMC.
    Details for below
    SAP Systems Manager
    SAP AG
    Version: 7100.109.15.8983
    Window Xp
    Any suggestions would be apperecited.
    Thanks
    Srini

    It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

  • SAP standard Menu : few menu paths not visible in Production but dev

    Hi All,
    We have a problem where in we can see the following menu path visible in standard menu in developement system; while the same menu path ( and few others also ) not visible in production system for same user ( i.e. having similar authorizations )
    the path is :  SAP Menu --> Accounting --> Financial Supply Chain Management --> Cash and Liquidity Management
    Our system is : ECC 6.0
    Every user should be able to view SAP standard menu inspite of the fact that he might have authorization to certain transactions only; hence this should not be an authorization issue ( as per my view ).
    So can anybody help/ suggest in this regard?
    Thanks.
    Regards,
    Shamish

    Hi Alex,
    I had that option in front of me ( we actually tried it also with no result ). But before that I would like to know, why this might have happened. Why there is difference between standard menu on both servers?
    Regards,
    Shamish

  • Difference b/w SAP BW and SAP Netweaver BI ?

    Hi Friends! could some one tell me the difference <b>between SAP BW and SAP Netweaver BI</b> ? In what way BI Netweaver 3.5 is different from SAP BW? is BW and BI are same? if there is any difference between BI and BW then what are they?
    i would appricaite if some one can get me rid of from these doubts...
    Thanks a lot for reading this post and hope i will get answers for my quetions.
    manmit

    Hi all,
    Please let me try to clarify this discussion. "SAP BW" is the former standalone component name. We now refer to "Business Intelligence" or "BI" instead of "BW", EXCEPT when making reference to the release numbers for older versions, e.g., SAP BW 3.1 Content. Now, of course, BI is just a part of the SAP NetWeaver platform. SAP BW 3.5 is the BI component of SAP NetWeaver 2004 - we had already name the component before the merge into the platform, hence the continuing use of "BW". With the latest release, BI is simply part of SAP NetWeaver 2004s.
    So, from a terminology perspective, SAP NetWeaver BI is simply an evolution from SAP BW.
    If you want to know the differences between the current SAP BW 3.x releases and SAP NetWeaver 2004s, please search the SAP NetWeaver 2004s forum that was set up for BI at /community [original link is broken], which contains several threads with both a discussion of the new features and links to more information. This question has also been posted more than once to this forum! Please search the forums first before starting a new thread.
    Regards,
    Katie Beavers
    SAP NetWeaver Product Management

  • SNC between SAP BO and SAP BW for MS Advanced Analysis

    Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
    when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
    No applicable data found.
    On the SAP BW system, on ST22 there is this runtime error:
    CALL_FUNCTION_SEND_ERROR.
    An error occurred when executing a Remote Function Call.
    "SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
    What happened?
    "CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
    An error occurred when executing a Remote Function Call.
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
    Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
    CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
    Internal error code.... "RFC_IO5"
    There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
    Last error logged in SAP kernel
    Component............ "SNC (Secure Network Communication)"
    Place................ "CPIC (TCP/IP) on host ANDREA_13"
    Version.............. 5
    Error code........... "-12"
    Error text........... "SNCERR_INVALID_FRAME#A received frame is
    invalid/truncated or is no SNC-frame"
    Description.......... "SncProcessInput"
    System call.......... " "
    Module............... "sncxx.c"
    Line................. " "
    The error reported by the operating system is:
    Error number..... " "
    Error text....... " "
    User and Transaction
    Client.............. 100
    User................ 00000015
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
    Program............. "SAPLRSBOLAP_BICS_PROVIDER"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 720
    Kernel Release...... 720
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
    Client.............. "###"
    User................ "############"
    Transaction......... " "
    Call Program........."C:\Program Files\Microsoft Office\Office1"
    Function Module..... "BICS_PROV_GET_INITIAL_STATE"
    Call Destination.... "GBP_boe_Default"
    Source Server....... "ANDREA_13"
    Source IP Address... "10.101.3.80"
    Additional information on RFC logon:
    Trusted Relationship " "
    Logon Return Code... 0
    Trusted Return Code. 0
    Note: For releases < 4.0, information on the RFC caller are often
    only partially available.
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
    "BICS_PROV_GET_INITIAL_STATE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 1
    of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
    Could you help me?
    Thank's a lot and best regards.
    Andrea Maraviglia

    Ciao Andrea,
    just a couple of hints:
    - Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
    - Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide): 
    "With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
    are true:
    u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
    see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
    at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
    Integration for SAP Solutions > XI 3.1.
    u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
    SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
    NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
    Network Communications.
    u2022 Each end user has a user account in the connected BW system."
    Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
    Hope it could hep.
    Regards.
    Roberto.

  • Differnce between SAP-XI and SAP PI

    hi can any body tell me what is the differnce between SAP-XI and SAP-PI

    Hi vijay,
    u can get lot of information regarding PI and XI in sdn.There already exists a no. of thread.just search with keyword "XI 3.0 and PI 7.0" u can get a lot.
    XI 3.0
    1. J2Se adapter engine was replaced with J2EE Adapter Engine.
    2. BPM was available from XI 3.0
    3. Part of Netweaver 2004
    PI 7.0
    1XI renames as Process Integration
    2.. Part of Netweaver 2004s.
    3. Has all features of XI 3.0 and every SP of Pi 7.0 has a corresponding release for XI 3.0.
    4. Runs on WAS 7.0 and has same features as XI 3,0
    From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
    A comparision of the service packs in 2004 and 2004s;
    in 2004 - in 2004s
    SP12 & < - SP04
    SP13 + 14 - SP05
    SP15 - SP06
    SP16 - SP07
    SP17 - SP08
    SP18 - SP09
    For release notes
    ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
    There is no f'nal difference between XI 3.0 and PI 7.0. In order to bring all netweaver releases on par with each other , SAP released / renamed XI as PI and it is a part of NW04s
    For every release of PI 7.0, there is a parallel Support Pack on XI.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 – Overview of New Capabilities</a>
    Also check these threads.
    Difference between NetWeaver 2004 and NetWeaver 7.0 or 7.1
    All the diff  between XI 3.0 and PI 7.0
    differences between xi 3.0 and pi 7.0
    Difference/ changes from XI 3.0 to PI 7.0
    regards
    Bill

  • What is difference between SAP R3 And SAP IS Mills Product

    HI Friends
    What is difference between SAP R3 And SAP IS Mills Product
    What are the futures are availables in IS MIlls
    Regards

    Hi,
    SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
    Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
    The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
    These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
    To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle – from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
    Prase

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Connecting SAP ERP and SAP XI via RFC (in cluster)

    Hi all,
    I have a strange problem with SAP ERP and SAP XI (production systems). Both systems are installed in cluster. I am trying to connect both systems via RFC, so I configurred TCP connection using SM59. But, when I try to test connection, I am always getting error "Program xxxx is not registered". When I register the program on the sender communication channel on different system (develop system - different machine), connection works fine. Configuration on both SAP XI production and development systems is identical. I just cannot understand, why production SAP ERP does not see registered program on production SAP XI. Has anybody experiences with this? Or any other ideas where should be the problem?

    Are you configuring the RFC Sender adapter with load balancing?
    what is the hostname you're using for ERP?
    Is it the message server's?
    Also, make sure the dispatcher is properly configured, sending the requisitions to the application servers.
    Regards,
    Henrique.

  • SNC between SAP BO and SAP BW

    Hy esperts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue: 
    when the user launch a Bex Query by MS Advanced Analysis,  this error message occurs:
    No applicable data found.
    On the SAP BW system, on ST22 there is this runtime error:
    CALL_FUNCTION_SEND_ERROR.
    An error occurred when executing a Remote Function Call.
    "SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
    What happened?
    "CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
    An error occurred when executing a Remote Function Call.
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
    Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
    CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
    Internal error code.... "RFC_IO5"
    There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
    Last error logged in SAP kernel
    Component............ "SNC (Secure Network Communication)"
    Place................ "CPIC (TCP/IP) on host ANDREA_13"
    Version.............. 5
    Error code........... "-12"
    Error text........... "SNCERR_INVALID_FRAME#A received frame is
    invalid/truncated or is no SNC-frame"
    Description.......... "SncProcessInput"
    System call.......... " "
    Module............... "sncxx.c"
    Line................. " "
    The error reported by the operating system is:
    Error number..... " "
    Error text....... " "
    User and Transaction
        Client.............. 100
        User................ 00000015
        Language Key........ "E"
        Transaction......... " "
        Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
        Program............. "SAPLRSBOLAP_BICS_PROVIDER"
        Screen.............. "SAPMSSY1 3004"
        Screen Line......... 2
        Information on caller of Remote Function Call (RFC):
        System.............. "########"
        Database Release.... 720
        Kernel Release...... 720
        Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
        Call Type........... "synchron and non-transactional (emode 0, imode 0)"
        Inbound TID.........." "
        Inbound Queue Name..." "
        Outbound TID........." "
        Outbound Queue Name.." "
        Client.............. "###"
        User................ "############"
        Transaction......... " "
        Call Program........."C:\Program Files\Microsoft Office\Office1"
        Function Module..... "BICS_PROV_GET_INITIAL_STATE"
        Call Destination.... "GBP_boe_Default"
        Source Server....... "ANDREA_13"
        Source IP Address... "10.101.3.80"
        Additional information on RFC logon:
        Trusted Relationship " "
        Logon Return Code... 0
        Trusted Return Code. 0
        Note: For releases < 4.0, information on the RFC caller are often
        only partially available.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
         "BICS_PROV_GET_INITIAL_STATE".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 1
        of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
    Could you help me?
    Thank's a lot and best regards.
    Andrea Maraviglia

    Hi Ingo,
    the runtime error occurs in this scenario:
    1) Launch MS Advanced Analysis
    2) Logon on SAP BO
    3) Select the System connection for SAP BW where the SNC has been configured
    4) Select  the bex Query
    5) The system response with this message: No applicable data found.
    On ST22 , on SAP BW, there is the runtime error: CALL_FUNCTION_SEND_ERROR with the message:
    "SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame".
    Thank's a lot.
    Best Regards.
    Andrea
    Edited by: Maraviglia Andrea on Jan 24, 2011 6:02 PM

  • SAP SCM and SAP APO: Best practices, tips and recommendations

    Hi,
    I have been gathering useful information about SAP SCM and SAP APO (e.g., advanced supply chain planning, master data and transaction data for advanced planning, demand planning, cross-plant planning, production planning and detailed scheduling, deployment, global available-to-promise (global ATP), CIF (core interface), SAP APO DP planning tools (macros, statistical forecasting, lifecycle planning, data realignment, data upload into the planning area, mass processing u2013 background jobs, process chains, aggregation and disaggregation), and PP/DS heuristics for production planning).
    I am especially interested about best practices, tips and recommendations for using and developing SAP SCM and SAP APO. For example, [CIF Tips and Tricks Version 3.1.1|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006480652001E] and [CIF Tips and Tricks Version 4.0|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000596412005E] contain pretty useful knowledge about CIF.
    If you know any useful best practices, tips and recommendations for using and developing SAP SCM and SAP APO, I would appreciate if you could share those assets with me.
    Thanks in advance of your help.
    Regards,
    Jarmo Tuominen

    Hi Jarmo,
    Apart from what DB has suggested. you should give a good reading on the following.
    -Consulting Notes (use the application component filters in search notes)
    -Collective Notes (similar to the one above)
    -Release Notes
    -Release Restrictions
    -If $$ permit subscribe to www.scmexpertonline.com. Good perspective on concepts around SAP SCM.
    -There are a couple of blogs (e.g. www.apolemia.com) .. but all lack breadth.. some topics in depth.
    -"Articles" section on this site (not all are classified well.. see in ECCops, mfg, SCM, Logistics etc)
    -Serivce.sap.com- check the solution details overview in knowledge exchange tab. There are product presentations and collaterals for every release. Good breadth but no depth.
    -Building Blocks - available for all application areas. This is limited to vanilla configuration of just making a process work and nothing more than that.
    -Get the book "Sales and Operations Planning with SAP APO" by SAP Press. Its got plenty of  easy to follow stuff, good perspective and lots of screen shots to make life easier.
    -help.sap.com the last thing that most refer after all "handy" options (incl. this forum) are exhausted. Nevertheless, this is the superset of all "secondary" documents. But the maze of hyperlinks that start at APO might lead you to something like xml schema.
    Key Tip: Appreciate that SAP SCM is largely driven by connected execution systems (SAP ECC/ERP). So the best place to start with should be a good overview of ERP OPS solution overview, at least at the significant level of depth.). Check this document at sdn wiki "ERP ops architecture overview".
    I have some good collection of documents though many i havent read myself. If you need them let me know.
    Regards,
    Loknath

  • How to integrate sap bw and sap pi system

    Hi all,
      I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
    Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
    Thanks
    SG

    >> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
    Basically you need to use client proxy. 
    A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
    B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
    C) You need to do proxy configuration between SAP BW and PI to establish connection
    Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
    Hope this helps

  • Right PAAS/Middleware for SAP HCM and SAP Cloud Integration ?

    In 2013, SAP has lot of Focus on SAP Cloud and SAP HCM on premises integration elements following the hybrid model, I will like to know the direction from SAP on integration Middleware/PAAS which will reap great returns in terms of TCO to customers over next 4-5 years basis the SAP Integration Road map esp the exposing standard connectors ?
    Please do keep in mind the the Middleware/PAAS should be able to support easy integration with Third Party Vendors like ADP/Hewitt etc

    The SFAPI and OData API are exposed for any web service integration, including Dell Boomi AtomSphere. The OData API can handle delta changes.
    HCI is an evolving platform and offers similar functionality to Boomi in terms of building integrations with a drag-and-drop interface, etc. There is a SuccessFactors connector provided for HCI and the Talent Hybrid integration content is available on HCI as well as PI. The Employee Central integration content currently available on Boomi should be available on HCI hopefully by the end of the year. The Talent Hybrid high-level roadmap can be found here:
    SAP HCM and SuccessFactors Integration Packages: an overview
    Boomi is included in the Employee Central subscription, but is very expensive to license for other use cases (i.e. Talent Hybrid scenarios). HCI costs 7.5% of the SuccessFactors subscription. PI is free. HCI may be included in the Employee Central subscription at a later date, but this is not definitely going to happen.

  • Must all SAP MSS, SAP ESS and SAP PCUI_GP be of the same SP level?

    Hello,
    in order to fix an error in XSS we need to upgrade SAP PCUI_GP to SP 10. Is it therefore necessary to upgrade also the rest of the components building XSS (SAP MSS and SAP ESS) also to SP 10 or can they stay on SP 9 as they are now? Is there an official SAP document answering my question?
    Regards,
    Adam

    adam,
    the MSS and ESS should work independently, but both require PCUI_GP as a base-component, so these versions should be equal.
    you can try to use different SP-levels, but this is not supported & what's the problem to keep them on the same level?
    depending on the changes on each SP-level (e.g. if there are only country-specific changes for countries you don't need or text-corrections, check the notes for the SP-levels) you can risk it...
    kr, achim

  • PROXY_NOT_ALLOWED_ON_IS ( SAP ISR and SAP AII Integration problem )

    Hi,
    I have facing this problem, during SAP IS retail and SAP AII integration ...
    SAP AII and SAP PI in same physical server but different client ..
    scenario Detail -- 
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b3084b-0953-2a10-2993-c0a5fe81d591
    server detail ..
    I am using standard content for integration ..  (
    SAP IS retail (client 200.  server XYX)
    SAP AII ( Client 100 server xxx)
    SAP PI  (Client 001 server xxx)
    Error Detail -
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">PROXY_NOT_ALLOWED_ON_IS</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Please help ....................
    Regards,
    Amit
    Edited by: Amit Shivhare on Apr 7, 2009 11:53 AM

    Hi all,
    That problem is solved . but new problem come ..
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
      <SAP:P1>Request Message</SAP:P1>
      <SAP:P2>CX_ST_DESERIALIZATION_ERROR</SAP:P2>
      <SAP:P3>/1SAI/TXSC93730E87CC1B9E866B5</SAP:P3>
      <SAP:P4>XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS</SAP:P4>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSC93730E87CC1B9E866B5 XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXSC93730E87CC1B9E866B5 Data loss occurred when converting Test</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Regards,
    Amit

Maybe you are looking for

  • How to best partition the HDD for dual boot: Windows 8 & Linux

    Hi, I'm a newbie in Windows 8, linux, Partition.... I would like to use my new laptop with windows 8 pre-installed to the following: Create a Dual Boot Windows 8 / Ubuntu Create on my C drive (unique drive on my laptop): *a partition for the system *

  • Horizontal Menu Bar (using JQuery as opposed to Spry Assets)

    In older versions, used SpryAssets to create a horizontal menu bar, but that is no longer supported.  CC has lots of JQuery inserts, but none for a Horizontal Menu Bar.  What do i do to create one?

  • IWeb gallery - I can't see it!

    Hello, Just finished putting together a website for my brother but having issues with the gallery. I have a portfolio page for his photos. When I'm in iweb the photo album covers scroll nicely between images and link straight to the photo gallery pag

  • Distribution using iBooks Author

    Does anyone know if I post to the iBook Store using the new iBooks Author will I be located in a textbook section of the store or the main book section?

  • What is it directory path and where do i find it??

    i am about to publish my website made with i web and i cant find path directory HELP