SAP HR 0002 infotype problem
Hello all,
We are using SAP HR activesync as the authorative source. Some time ago something happened and we began getting an error. This is actually a really serious error.
The error is java.lang.ArrayIndexOutOfBoundsException: 973.
Apparently for some reason the JCO library is trying to parse the incoming string but since the incoming string is 966 bytes long the exception occurs. (as i saw in the WSTrace.log file)
LONG_INFTY is set to X.
So anyone has any idea on this?
Best,
Hello again,
We seem to have the latest versions. I think what is happening is, somewhere during the parsing process, JCO fails. It may stem from a connection loss or something else but I have searched deep and wide but couldn't find anything.
By the way, do you have any idea why JCO trace levels are reset to 0?
I see this in the last trace file generated..
Provisioner [10:40:47:431]: [JAV-LAYER] JCO.setProperty(jco.trace_level, 0)
Similar Messages
-
SAP Adapter has a problem, SOD violations will not be checked
Hi,
In our ides server whenever i click save button in su01 i get the following error ,
"SAP Adapter has a problem, SOD violations will not be checked !
Please check with your system Administrator
Technical Info:
Error when opening an RFC connection "
we didn't have this problem before . can anybody help me to resolve the issue
Also I am getting this error only if I click save in su01. in other t code. I don't get this error
Thanks in Advance
Edited by: gajula jhansi on Apr 11, 2011 11:28 AMYou need to restart your sap adapter in GRC front end from configurations tab-->Sap adapter >choose the one for your back end system> if it's grayed out or even green still, click on it and let it restart and turn green again.
Then you go back to your backend ECC system and in SM59 , choose the RFC connection for the Risk Terminator (the one you have saved in the Risk Terminator transaction /VIRSA/ZRTCNFG in backend system).. and test the connection. It should pass the connection test if your adapter is working and set up correctly. Then when you do save in SU01 or make changes in PFCG and have Risk Terminator activated for the backend system, it will check the SOD violations against those transactions from RAR front end.
If you don't want Risk Terminator to check for SOD violations in front end RAR, then you need to set your settings to 'NO' for all in the Risk Terminator transaction. You can get all this info in the GRC config guide for RAR and SPM area.
Regards,
Alley -
Including Second Name and Middle name in 0002 infotype
Hi friends
I have a requirement to include third name and fourth name of employees in personal data infotype.
Checked the table V_T522N and I have included the following fields in the table.
First name: VORNA
Second Name: NACH2
Midde name: MIDNM
Last Name: NACHN
But the fields are not displaying in 0002 infotype. Kindly advise on any specific configs or setting to be made to display these fields or do we need technical help to do this. I checked the modulepool as well, but couldnu2019t find any fields with middle name or second name.
Please help
Santhosh.SGoto Personnel Management -> Personnel Administration -> Customizing User interfaces -> Change Screen Modifications
Look for the following record
MP000200 2000 10 2010 0
double click on it.
Hit the feature button
Type P0002
Press Change
Check Your country groupig under the Infotype screen control and set the return value to be 10...
The Middle Name should appear now..
Best regards,
Ahmed Salah -
SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7
Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid KZP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c 1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c 1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c 9696]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c 10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c 318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,Also dev_disp is like below:
sid KZP
systemid 370 (Solaris on SPARCV9 CPU)
relno 6400
patchlevel 0
patchno 221
intno 20020600
make: single threaded, Unicode, 64 bit
pid 22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c 1104]
shared lib "dw_xml.so" version 221 successfully loaded
shared lib "dw_xtc.so" version 221 successfully loaded
shared lib "dw_stl.so" version 221 successfully loaded
shared lib "dw_gui.so" version 221 successfully loaded
shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00 <
DpShMCreate: sizeof(wp_adm) 10752 (1344)
DpShMCreate: sizeof(tm_adm) 3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpShMCreate: sizeof(comm_adm) 316000 (632)
DpShMCreate: sizeof(vmc_adm) 0 (560)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c 12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c 12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Jan 29 09:12:18 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 22021 Ended no 1 0 78 SAPSYS
1 DIA 22022 Ended no 1 0 78 SAPSYS
2 UPD 22023 Ended no 1 0 78 SAPSYS
3 ENQ 22024 Ended no 1 0 78 SAPSYS
4 BTC 22025 Ended no 1 0 78 SAPSYS
5 BTC 22028 Ended no 1 0 78 SAPSYS
6 SPO 22030 Ended no 1 0 71 SAPSYS
7 UP2 22038 Ended no 1 0 71 SAPSYS
Dispatcher Queue Statistics Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Fri Jan 29 09:12:18 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00 <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c 9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards -
SAP Business Connector certificate problem
We are trying trying to send data from SAP to bank via SAP business connector using bank URL. We have configured the certificates in SAP BC which are authenticated by bank on the basis of private key generated from our server. Now when we trying to post data to bank it is giving below error.
java.lang.RuntimeException: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by TrustDecider
Any idea? Please give me some suggestions to resole this problem.
Thanks and RegardsNormally I do not like to give documentation references, but in this case I think it makes sense. Certificate handling is an ugly and complicated topic, so many things can go wrong. Please check the SAP BC 4.7 Administration Guide, page 103 onwards ("Securing communications with the server"). It explains very well what needs to be done. Make sure you configured everything correctly.
CSY -
SAP Note Number 1535966 problem with IDWTFILE_US_1042.XML
Dear Colleagues,
I have installed the new SAP note for the 1099 from for Tax year of 2010 (note Nr.1535966).
at Step 7 when I upload the IDWTFILE_US_1042.XML file, the activation of this files fails and gives the following error messages:
Error in node WH Agent Contact: source field IDWTADD-US_AGENT_NAME does not exist
Message no. DMEE_ABA306
Error in node WH Agent Dept.: source field IDWTADD-US_DEPT_TITLE does not exist
Message no. DMEE_ABA306
My Platform is as follow:
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
SAP_BASIS 700 0015 SAPKB70015 SAP Basis Component
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D PI_BASIS 2005_1_700
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_APPL 600 0010 SAPKH60010 Logistics and Accounting
SAP_HR 600 0018 SAPKE60018 Human Resources
FI-CA 600 0010 SAPK-60010INFICA FI-CA
FI-CAX 600 0010 SAPK-60010INFICAX FI-CA Extended
Have you had this problem? do you know of a solution? It seems to me that the relevant IDWTFILE_US_1042.XML file must be incorrect!
Help is greatly appreciated.
Thank you.
Regards;
HameedHi Cheryl,
I used the trx SMARTFORMS to upload all of the forms mentioned. This earlier thread with one of my questions answered might be helpful to you.
OSS Note 1535966 - a Smartforms question
Also, you may need to change the package for some of the forms to ID-FI-US as the note suggests. Use trx SE03 to change the package for a form that might not already be in package ID-FI-US.
We only use form MISC and none of the others, but I uploaded and did the note steps for all anyway.
I think this note lacks a bit of clarity.
Thanks
Jeremy -
User migration vom SAP DB to LDAP: Problem when userId not equal to logonId
Hello
I have to write a migration tool which migrates the users stored in the SAP DB to LDAP. Thereby the logon ID of the users in the SAP DB is not equal to the user ID.
The migration works fine and in SAP Identity Management (IDM) everything is ok.
But when I try to log onto the portal with a migrated user, the portal tells me that no portal role is assigned to the user. But the IDM shows clearly that the portal role is assigned to the user.
Investigation showed that when I create in the LDAP a user with the same logon ID and user ID, the log onto the portal works ok. As soon the logon ID differs from the user ID, the portal does not find the assigned portal role anymore, although in IDM everything works.
How can I solve this problem? It is important that the logon ID and the user ID are different as otherwise all the stored data has wrong references.
Greetings
Rolf
Edited by: Rolf Grüninger on Jul 19, 2011 6:08 PMProblem solved:
The naming attribute of the user account has to be set to the same attribute as the one of the user object and not to the user logon ID. -
Transaction iView - SAP GUI for HTML - Problem while hiding menu bar
Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
ReenaHello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb -
HR Custom InfoTypes problem when added to custom Infoset Report for PA
Hi, I am having an issue with the adhoc query /SAPQUERY/HR_ADM. I added the custom infotypes 9* I created to this standard infoset by using SQ02 and adding these by going into the menu path Edit--> Change InfoType selection. I regenerated this object and attached to a transport. The query runs fine in the DEV system where I made the change...I can choose fields for output or selection from the standard infotypes and custom infotypes as expected. I migrated this transport to the test system and now when I try to do the same thing I get an error when I try to click on any object in my custom infotype and some of the standard infotype. I tried regenerating and resending to the test system and still have the same issue. This is the error in the dump:
79 * create work area
80 create data data_wa like line of data_table.
81 assign data_wa->* to <data_wa>.
82 assign component fcat_wa-fieldname OF STRUCTURE <data_wa>
83 to <field>.
84
85 loop at t_fcat into fcat_wa.
86 field_filled = 'X'.
87 assign component fcat_wa-fieldname OF STRUCTURE <data_wa>
88 to <field>.
89 if sy-subrc <> 0.
>>>>> raise internal_error.
It appears the TEXT488 is the value in the fcat_wa-fieldname and I do not see this in the data_wa.
Does anyone know how to fix this problem or what I might try or look at to see what the difference is between the DEV system (where it works ok) the the Test system where it is giving me an error?
Thanks in advance for any help you can provide.
LaurieAfter further investigation I found the problem to this was in the generation of the objects. Even though I generated before attaching to a transport and all looked ok, there is some sort of bug causing it to not generate properly so I had to sign on to each environment and generate the object in SQ02 including in Production. After I did this the custom infotypes were accessible in the Infoset.
-
Hi Gurus,
I am now facing one problem about creating a system in EP.
My system is Netweaver 04s with AS,EP and BI with SP13. All run in one single server.
I maintained the SAP Web AS, and tested the connection, got the following message:
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.2.62:50000)
5. The host name 192.168.2.62 was resolved successfully.
6. The server 192.168.2.62 could not be pinged successfully.
Strange that the ping fails, cause all the instances are running in the same server.
"Connection Test for Connectors" works fine for me by using SSO from portal to abap.
Please give the solution.
Thanks & RegardsHi,
You mean to say you are using IP address to login to portal. Using IP address has caused many problems. I am not sure if this would solve your issue but it is always recommended to use fully qualified domain name as host while accesssing portal. You can check using that too.
Regards,
Harini S -
SAP Business One Speed problem
Hello All
We are using a SAP B1 2007 PL12 and facing a very big problem of performance or Speed currently our database size is more than 50gb and now our consultant recommend us to upgrade 2007 to 8.8. can this upgrade resolve our problem or not?Dear,
Check : upgrading sap business one version 800232 is not allowed
This may give you helpful information.
Regards,
Syed Hussain. -
SAP Business One Hanging Problem
Dear Sir,
We are using SAP B1 2005 on Windows 2003 Server Enterprise Edition. We have 13 users and there is an issue that SAP hang 5 to 7 times in a day on Server end also on clients end. That's we are facing too problem because due to this problem we are restarting the server when SAP hang. I have also checked the internet speed it comes 2.2Mbps. Now it become a big issue. So, I hope that we will surely get a best response from you for the same.
Thanks,
Pardeep Verma
09250046562Dear Sir,
We are using SP1 2005 and running it on WINDOWS 2003 SERVER ENTERPRISE EDITION SP2.
h1 .ldf is 170 GB
H2 and, .mdf is 11 GB.
Server's configuration are:
INTEL(R) XEON CPU
E5507 @2.27GHZ
8GB OF RAM
and SQL Version is 2005
Thanks,
Pardeep Verma -
SAP java connector SAPJCO problem..
Hi Friends..
<BR><BR>
*Can some one help me to solve this problem,<BR>
I am just trying to connect our SAP server using SAPJava connector i,e, sapjco3. in windows (XP) platform.<BR>
I am facing below mentioned problem...*
<BR>
<BR>
checkTID called for TID=0A0211C64C364B8158DA000C<BR>
>>> Error occured on IDS800 connection 1-axsids00|sapgw00|IDS800<BR>
com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "??????????????????????????u2020 u2020" with extension " PAYSAPIDL LS_CO ???" is unavailable.<BR>
at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:126)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocDocument.<init>(JCoIDocDocument.java:90)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:168)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:78)<BR>
at com.sap.conn.idoc.jco.JCoIDoc$DefaultJCoIDocRuntime.createIDocDocumentList(JCoIDoc.java:198)<BR>
at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:96)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:153)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3276)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2756)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2574)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2465)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2286)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:270)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:333)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:231)<BR>
at java.lang.Thread.run(Thread.java:619)<BR>
rollback called for TID=0A0211C64C364B8158DA000C>>> Error occured on IDS800 connection 1-axsids00|sapgw00|IDS800
com.sap.conn.jco.JCoException: (104)<BR> RFC_ERROR_SYSTEM_FAILURE: IDocException occurred(Raised by D00120|a_rfc)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:639)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2371)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:270)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:333)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:231)<BR>
at java.lang.Thread.run(Thread.java:619)<BR>
Caused by: RfcException: [D00120-DCCCMS|a_rfc]<BR>
message: IDocException occurred<BR>
Return code: RFC_FAILURE(1)<BR>
error group: 104<BR>
key: RFC_ERROR_SYSTEM_FAILURE<BR>
Exception raised by D00120-DCCCMS|a_rfc<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2761)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2574)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2465)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2286)<BR>
... 4 more<BR>
Caused by: RfcException: [D00120|a_rfc]<BR>
message: IDocException occurred<BR>
Return code: RFC_FAILURE(1)<BR>
error group: 104<BR>
key: RFC_ERROR_SYSTEM_FAILURE<BR>
Exception raised by D00120|a_rfc
<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3305)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2756)<BR>
... 7 more<BR>
Caused by: com.sap.conn.idoc.IDocRuntimeException: IDocException occurred<BR>
at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:140)<BR>
at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:153)<BR>
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3276)<BR>
... 8 more
Caused by: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3)<BR> IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "??????????????????????????u2020 u2020" with extension " PAYSAPIDL LS_CO ???" is unavailable.
at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:126)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocDocument.<init>(JCoIDocDocument.java:90)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:168)<BR>
at com.sap.conn.idoc.jco.rt.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:78)<BR>
at com.sap.conn.idoc.jco.JCoIDoc$DefaultJCoIDocRuntime.createIDocDocumentList(JCoIDoc.java:198)<BR>
at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:96)<BR>
... 10 more
<BR>
<BR>
<BR>
Regads,
SalilHi Mani,
Please if u can help me. Do let me know how you got the solution for it.Please
Regards
Laku -
SAP FICO --- iDoc ---- SM35 problem
Problem: We are currently using SAP R/3 E1P and sending invoicing material from different ERP system to it and using SM35 to solve possible problems (wrong accounts, zero invoices etc.) in transfer. Now we are planning to start using SAP Fico in company group and changing interfaces to use iDoc. Sap consultants argue that it is impossible to use SM35 with iDoc....
Is that really so? Hopefully someone can help...Hello, Napotto,
SM35 is for processing of batch input recordings/sessions, which is something completely different from idocs. So yes, your consultants are right, you cannot process incorrect idocs with SM35
However, there are another transactions for idocs monitoring and reprocessing (BD87, WE02), so you still will have the tools for data/interface corrections, even if at the beginning you will probably found it not so simple and user-friendly as SM35; your consultant should provide you with neccessary training.
Kind Regards
TomT -
SAP 4.7ee installation problem
Iam installing SAP 4.7ee when data base instance in running power fails. when iam restarted the installation it is showing the error like this ,plz tell me the solution
ERROR 2010-06-13 03:09:51
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX1.log
ERROR 2010-06-13 03:09:51
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
ERROR 2010-06-13 03:09:51
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
ERROR 2010-06-13 03:10:51
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
ERROR 2010-06-13 03:14:54
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2010-06-13 03:14:55
FJS-00012 Error when executing script.> PLZ PROVIDE ME THE SOLUTION FOR THIS PROBLEM???
Writing something like that in CAPITALS means SHOUTING at people.
What SAPGUI version are you using and what patchlevel? Did you try to update to the latest one?
Markus
Maybe you are looking for
-
Incomplete Orders cann't be made complete
Hi All, I am running v.02 report. The only entry missing is the (BPKI) Freight Charge Method long text. Even when long tex is entered on item level and header lever the order is not regarded as complete. I can see the text created. I was told that pr
-
hi sdn, I'm using BW sandbox 3.5(with support pak 17) system in which under 0sd_co3 sales overview cube I'm getting update rules like from 2lis_01_s260 2lis_01_s261 2lis_01_s262 2lis_01_s263 but i heard that these datasources are upgraded by someothe
-
TS1440 I do not have a os x installation disk.
What do I do?
-
I lost my password and how do i unlock IPOD?
I am trying to unlock IPOD CLASSIC and I do not remember combination to open and use my IPOD. If you know that how to unlock it please let me know. Thank You
-
Multiple problems. PLEASE HELP!
Okay, I have two major problems with my iPod touch (3rd gen) First, my iPod thinks its constantly plugged in to an iHome. The volume slider doesn't show up, and even when a song is playing, no sound comes from the speakers or from the headphones if t