SAP HR - adhoc query/infoset

Hi,
I have an Infoset which is based on Logical database PNP & it has few additional fields. I added a new additional field in Infoset  and the requirement is to add the additional field to the selection screen of "Infoset Query". But in the Infoset query the 'Selection' checkbox for the additional fields I have added not available, & only the 'Output' Checkbox is available.
Thank you
Suganya

Dear Archana,
Use the following three transactions for creation and Maintaining queries :-
SQ01, SQ02 and SQ03.
Details are available in :-
http://help.sap.com/saphelp_47x200/helpdata/en/f6/c39138e4a0341fe10000009b38f8cf/frameset.htm
Best Regards
Satish Nair

Similar Messages

  • SAP HR Adhoc query

    Hi
    How we can develop HR REPORTS without programming knowledge.
    If it is by SAP Adhoc query.what are the steps to create.
    Thanks

    Dear Archana,
    Use the following three transactions for creation and Maintaining queries :-
    SQ01, SQ02 and SQ03.
    Details are available in :-
    http://help.sap.com/saphelp_47x200/helpdata/en/f6/c39138e4a0341fe10000009b38f8cf/frameset.htm
    Best Regards
    Satish Nair

  • How to adjust adhoc query when the database table changed.

    DearFreinds,
            I have created an adhoc Query , however after few days there was a requirement to remove some fields and change the length of some fields . Now the Adhoc query showing as to adjust , however when iam trying to adjust nothing is happening. Could any one let me know how to adjust with the table strucutre in the adhoc query.
    Regards
    madhu.

    Hi Sumit,
           Yes i have adjusted the database from se11 itself by going into utlity > adjust database . However i can still see the
    adhoc query -> infoset asking me when iam trying to go in change mode saying the database table has been changed do you want to adjust . 
    I have adjusted by going to more functions still there is no change. Please let me know what exactly i have to do.
    regards
    madhu

  • SAP ADHOC Query execute only

    dear all,
    I have setup a new role and made adhoc query for users to be able to maintain, change etc......
    You can set up authorizations in such a way, that certain end-users in a user group are authorized to maintain and execute queries, while other members of the same user group are authorized only to execute existing queries."
    the above statement, states other memebrs can be setup to execute only?
    what must I do to make the endsers allow them to execute the query only?
    for the first set of users i have within object S_QUERY made them to use change, maintain and translate.
    thanks all

    There is info here: http://help.sap.com/SAPHELP_NW70EHP1/helpdata/EN/de/45daf69ef111d195050000e82de14a/content.htm and here: http://help.sap.com/saphelp_46c/helpdata/en/de/45daf69ef111d195050000e82de14a/content.htm
    Users with S_QUERY actvt=02 can move between infosets with no problem.  If you are removing this then you need to specify which infosets are assigned to a user group and which users are assigned to the user group.  If you have lots of users and queries already then this may be a big piece of work and illustrates why use of queries may save time for one team (developers) but give more work for others.

  • Can we call function modules in SAP query or ADHOC query

    Hi ,
    Can we call afunction moudule in sap query or ADHOC query ?If yes How
    An early responce is greatly appreciated
    Thanks and best regards
    Rajeev Chhabra

    Hello Rajeev Chhabra,
       Yes; you can call function module in SAP Query. In InfoSet definition (SQ02), you can create additional field. In this field definition, you can add code snippet where you can function module.  
    However, this is not possible in Quick Viewer (SQVI) Query.
    Thanks,
    Venu

  • Sapquery , adhoc query and Infoset query

    any body having any material for ADHOC QUERY , SAP QUERY and Infoset query with detail explanation and steps for creation.
    plz forward it to me??????????

    hi,
       sap query r used to design reports to see the data according to our selections in this daa is fetched from diff tables its  much easier to desing reports using this
                 infoset query is somthign used with BI ints used to read data form PSA some temp storage loc
               if i am wrong someone correct me
    reward if useful
    ravi

  • SAP Query Infoset

    Dear All,
    I have created a SAP Query Infoset with ldp pnp, i have a customer infotype added to that infoset.
    One of my field in the customer infotype consist of value and text(meaning values are stored in the infotype, which also has some text attached to it which is the check table).
    Now how can i link those two in the infoset, so that user can choose between them?
    Thanks.
    Moderator message: please choose more descriptive subject lines for your posts.
    Edited by: Thomas Zloch on May 26, 2011 10:12 AM
    Edited by: Satish R on May 26, 2011 10:55 AM
    Edited by: Satish R on May 26, 2011 10:59 AM
    Edited by: Satish R on May 26, 2011 11:00 AM

    Hello Satish,
    In SQ01 when you create your output list, you can right-click the column and select "Value and text",  I am on version ECC 6.0.
    Kind Regards,
    Rae Ellen Woytowiez

  • Can an Infoset (Adhoc) Query Report be Run using a Variant ?

    Hi
    We have a lot of users that have access to infoset (adhoc) query tool but where they are not authorised to save queries in the system. They have the ability to create new reports and also open up existing reports using Open query button.
    My question is whether the user can run an existing report using the Variant if one exists and how they select to run the report with a variant, and also whether a user can edit a variant for an existing report.
    Any help on this would be much appreciated.
    Nicola

    Hi
    The usersd do not have SQ01. They only have S_PH0_48000513 - Ad Hoc Query since SQ01 is a sensitive transaction as access to it should be restricted. Hence our users can go into adhoc query and open existing queries etc.
    I do not see any button Execute with Variant when in Infoset (Adhoc) Query view. Might you be able to advise?
    Thanks a lot
    Nicola

  • Adhoc Query Vs SAP query

    Hi friends,
    Is there any difference between Adhoc query and SAP query.

    ADHOC QUERY:-
    Web item that enables you to create and change ad hoc queries in a Web application. You can use the Web item Ad-hoc Query Designer in the Web Application Designer to design Web applications in which you can create or change queries.
    SAP QUERY:-
    A tool that allows users who have no knowledge of the ABAP programming language to define and execute their own reports.
    To determine the structure of reports in SAP Query, you just have to enter texts, and select fields and options. If necessary, you can edit lists using Drag&Drop and the functions in the available toolbars.
    bye
    Naveen

  • SAP Adhoc Query by payroll area and respective periods

    Hello,
    I would get an idea of how to make SAP query by having a selection screen for Payroll area and its respectve periods (respective control record).  I was able to get the selection screen where I can input payroll area. But the date range for the report is a manual feed. I want something like when we select the payroll area, then I want the periods to be shown (payroll period - current period or other period). I'm new to making this SAP query. Any inupt is appreciated. Thanks.
    Raj.

    in the adhoc query we can select the periods based on the frequency but the dates will not get default
    As in the Pay roll driver the dates get defaulted based on the settings made in Control Record Status
    so i dont think this is possible thru Standrad
    let wait for expert views

  • Extracting SAP Query,Infoset  Data from VB Application

    Hi,
    I need to get all SAP Queries,Infosets and SAP Query Group data from a VB application.
    I have found a Remote Enabled Function called    IQAPI_READ_QUERY_CATALOG.
    But when I call the Function from a VB application ,the call is not successful and even I am not getting any exception.
    The call is getting false with null exception .
    Can anyone please guide me.
    Or is there any other function module /procedure / table to extract SAP Query ,Infoset,SAP Query Group data??
    Thanks in Advance.

    http://stackoverflow.com/questions/3765373/how-do-i-do-a-select-distinct-using-a-sap-infoset-query

  • Including adhoc query into SAP easy access menu

    Hi Experts,
    I had created a adhoc query its working fine as per clients  requirement.
    My query is can we include this in to SAP Easy access menu instead coming to SQ01 every time to run the query.
    Regards
    Ramesh

    H Ramesh.
    There are two sloutions for query
    1. Ad Hoc Query already exists in SAP Tree Menu
    SAP Menu > HR > Information Systems > Reporting Tools > Ad Hoc Query
    Else
    2. Take the Adhoc Query to Favorites, So that u dont want to Dig down every time. U can access it directly
    if useful award points
    Regards,
    Madhu Sudhanan

  • SAP ADHOC Query

    Hi,
    Please let me know how to export ADHOC query from one client to another client.
    Thanks
    Somashree

    Hello, Somashree!
    Maybe it will be useful for you: for exporting query to another client it's very simple using "Download" option in the report RSAQR3TR. It will be downloaded (as file) on your local machine.
    To upload the query into another client using report RSAQR3TR you just need to select "Upload" option -> select saved file and press F8.
    Regards,
    Sergey Ignatov.

  • Logical database in adhoc query

    Hello All,
    Can anyone tell me what is the logical database in adhoc query?

    Hi
    When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
    Infosets are created from Transaction SQ02.
    There can be four methods through which an Infoset can become a source of data:
    1.  Table join ( By joining two or more tables from Data dictionary)
         example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
    2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
    3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
    Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
    Custom Logical DBs can be created in T_Code SE-36.
    4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
    Reward Points, if helpful.
    Regards
    Waseem Imran

  • Can we call a function module in ADHOC query

    Hi
    Can we call a function module in ADHOC query if yes how.
    Also we ned to know how to call a function module in SAP query.
    An early responce is appreciated.
    Thanks and best regards
    Rajeev

    Okay as far as I understand your aim is:
    To fill a field in the output list with a value that is based on the current line information and calculated by a function module
    So go to SQ02 and create an additional field in the InfoSet.
    You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
    More information is avaiable in the Help part look for additional field in SQ02.
    Regards,
    Michael

Maybe you are looking for