SAP HR component upgrade

Hi Friends,
We have SAP_HR 600 SP18 level 58 and same EA_HR.
We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
Please send the link from where we can download the same.
Regards
Ganesh Datt Tiwari

> We have SAP_HR 600 SP18 level 58 and same EA_HR.
> We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
> Please send the link from where we can download the same.
Components of 602 are Enhancement packs which has to be downloaded and confirmed through Solution Manager. They are no more directly downloadable from the SMP.
Markus

Similar Messages

Component upgrade guide

Hi
We are planning for upgrade from 4.6c to ECC5. I'm not able to get the "component upgrade guide" from service.sap.com/instguides. Pls let me know the location of this document in sap website.
I'm looking for ECC6 upgrade document from 4.6c on HP-Unix with oracle database.
Take Care
Amarjit

Dear Amarjit,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you. .
Regards,
Rakesh

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

SAP R/3 Upgrade to ECC 6.0 - Protection of BSI data

Hello,
We are upgrading SAP R/3 to ECC 6.0. We have BSI and Vertex installed and functional in the landscape. I have 4 queries, seen below.
1- During a SAP R/3 Upgrade, BSI product leaving the .exe directory u2013 what are the steps that he needs to taken, so that they donu2019t get overlaid over during the upgrade?
2- Does SAP provide anything to protect (BSI)?
3- Does SAP provide anything to protect (VERTEX)?
4- What action should be taken on BSI and Vertex during R/3 Upgrade? Is there a checklist or document?
Thanks for help in advance.

> 1- During a SAP R/3 Upgrade, BSI product leaving the .exe directory u2013 what are the steps that he needs to taken, so that they donu2019t get overlaid over during the upgrade?
Create a file "protect.lst" in the kernel directory. The programs listed within are not deleted then. Neverless, take a backup of the kernel directory.
> 2- Does SAP provide anything to protect (BSI)?
> 3- Does SAP provide anything to protect (VERTEX)?
> 4- What action should be taken on BSI and Vertex during R/3 Upgrade? Is there a checklist or document?
>
See you other (almost identical query):
Protection of Key SAP HR tables in SAP R/3 Upgrade
Markus

List of items waiting in the SAP connect component in SOST transction

Hi All,
In SOST transction we can see the list of items waiting in the SAP connect component
I want to get this list of items
Could you please tell me how I can get this list?
Thanks in Advance
Snehal

Hi All,
Thanks for your reply.
The tables SOSC and SOOD are used to find the list of waiting objects to send.
My problem is , I have to delete some specific entries from this list through code so that these entries will not send to approver.
Is it sufficient to delete entry of seletced objtects from table SOSC?
Also could you please tell me about other tables like SOST?
Thanks in Advance
Snehal

SAP ERP Component

Most of the SAP ERP Component has been installed by the client but some are not installed as the client is saying that it not applicable in thier system, is there anyone can verify if the current SAP ERP Component of the client is good enough for the Integration configuration of the Cloud for Travel and thier SAP ERP.
Attached is the list of SAP ERP Component that client has in thier system.

Hi Joey,
this looks like the customer installed all FI/CO relevant components but no components for employee master data or payroll processing.
If the customer doesn't use the ERP system for their HCM processes, this looks ok for me.

Naming Standards for SAP's Component Model Objects....

In using SAP's Component Model, Scenario 3, there's a great deal of confusion in trying to version tracks, sc's, dc's, etc.
Since SAP does not currently have Best Practices for the use of the NWDI and the Component Model, can someone else provide me with some advice?
Thank you

Hi Peggy,
to find out more about all the NWDI terms it is a good idea to first read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/01/9c4940d1ba6913e10000000a1550b0/frameset.htm">architecture manual</a> about NWDI/JDI.
Regards,
Benny

SAP NetWeaver component naming (and numbering)

I have noticed this week (10-Oct-2005) that a number of the NetWeaver components have been renamed. For example, Enterprise Portal now seems to be called NetWeaver Portal, etc.
What is the next 'evolution' of SAP NetWeaver component naming (and version numbering)?

Hi,
Just to add to my colleagues response. The SAP NetWeaver components are actually going away (they still exist for historic reasons). The new approach will start with SAP NetWeaver 2004s.
Because of the growth of SAP NetWeaver technology and the reuse of features from one component in another and in new capabilities there is little sense in retaining the components naming.
Is BI still BI if new functionality means you always access it through a portal for admin and query execution?
So as the portal needs J2EE, BI will requires ABAP, J2EE, Portals, kmc, and BI from SAP NetWeaver. Is this the same old BI? We don't think so.
This simply stops making sense to have pigeon holing component names on an ongoing basis especially when you start really blurring the lines between 'components'. They do not work!
So SAP is now delivering SAP NetWeaver features and functions as IT Practices and IT Scenarios. These replace the component based rollout of SAP NetWeaver. For more information see the SAP service marketplace (http://service.sap.com/netweaver)
You will still see the SAP NetWeaver 'fridge' slide as this is showing capabilities of SAP NetWeaver (example: BPM and Integration broker). Their will be more and more capabilities added as we add more meaningful groupings of technologies (example of recent ones: SAP NetWeaver MDM and Visual Composer).
So, in short the component names are going away and being replaced by IT Practices/IT Scenarios.
I hope this helps,
Mike.
P.S. Release numbers also history for SAP as we don't have components - so you will only see SAP NetWeaver release names like 2004s.

SAP EPR6.0 Upgrade (Downtime).

Dear Sir/Madam,
Currently we are doing SAP ERP6.0 Upgrade, Can you please guide me what are the steps we need to adapt in order to Minimize System downtime.
Regards.
Hubert.

Hi Hubert,
Regarding the upgrade times, there are a lot of factors like the table
contents, DB size, tp and R3trans versions and so on that can affect the
performance. As to my experience, it depends mostly on database performance.
Please refer to the following SAP notes:
838725 - Oracle 10.2: Dictionary and system statistics
830576 - Parameter recommendations for Oracle 10g
1171650 - Automated Oracle DB parameter check
983548 - Long runtimes during SAP Upgrade using Oracle 10
558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2
Additional information:
1. if the location of the datafiles (upgrade directory) is a local
   directory or a mounted remote directory. For a remote directory
   the connection speed to it is important;
2. Even if the upgrade directory is local, network layer is used and
   thus network configuration is important. A typical difference
   between production and test systems can be that production is often
   high availability and thus can use e.g. virtual hostnames or other
   methods. Maybe the network setup is then different to non-production
   systems;
3. Also hardware issues, e.g. if the database or the upgrade directory
   are on fast disks and if caches are used are important;
4. the database speed (parameters, memory, disks, ....);
5. if the database is on the host where SAPup and R3trans run or on a
   different host might influence the speed but even a local database
   access uses network layer and thus network configuration for the
   database host is also an issue.
Best Regards
Julia

Assembly error SAP ESS Component concurrency-lock-denied

Hi,
we are always getting the following exception while assembling SAP-ESS Component in our NWDI:
(Step: Repository-export)
20101213121125 Info   :PropagationList CMS_sap.com_SAP_ESS_26_4da649762a8311dfca0e005056942f98 added to export.
20101213121125 Info   :Include sources physically into archive.
20101213121231 Fatal :caused by Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Precondition Failed "concurrency-lock-denied":communication error: VcmFailure received: Precondition Failed "concurrency-lock-denied"
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Precondition Failed "concurrency-lock-denied"
at com.sap.cms.tcs.client.Export.getContents(Export.java:45)
     at com.sap.cms.tcs.core.RepositoryExportTask.processRepositoryExport(RepositoryExportTask.java:167)
     at com.sap.cms.tcs.core.RepositoryExportTask.process(RepositoryExportTask.java:333)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.assemblePropagationRequests(TCSManager.java:739)
     at com.sap.cms.pcs.assembly.manager.AssemblyManager.assemble(AssemblyManager.java:1068)
     at com.sap.cms.pcs.assembly.manager.AssemblyManager.startLevelAssembly(AssemblyManager.java:468)
     at com.sap.cms.pcs.assembly.manager.AssemblyManager.startQueueAssembly(AssemblyManager.java:350)
Any suggestions?
Our System: NWDI 7.11 Patch 05
OS: Linux (amd64) - SAP DB (7.7.07)

Hello Golo.
Can you please recreate the problem whilst running the diagtool?
Note 1227928 Diagtool for troubleshooting NWDI (detailed logs)
There might be more information to work on.
Thanks
Kenny

SAP MII Component Hierarchy : Customer Support System

The SAP MII component hierachy in the SAP Customer Support System has been changed. MII components will be listed under MFG (SAP Manufacturing) on November 22, 2008, instead of the previous XAP-MII component.
As of this date, all NEW messages can only be recorded under the new component identifiers.
The new component hierarchy is as follows:
MFG
- MFG-MII   (SAP Manufacturing Integration and Intelligence)
- MFG-MII-CON (MII Content)
- MFG-MII-CORE (MII Core Development)
      MFG-MII-CORE-BSC (Business Suite Connectivity)
      MFG-MII-CORE-DTE (MII Design Time Environment)
      MFG-MII-CORE-RTE (MII Runtime Environment)
- MFG-MII-SFC (Shop Floor Connectivity)
      MFG-MII-SFC-PCO (MII Manufacturing Data Services
      MFG-MII-SFC-UDS   (Universal Data Services)
Edited by: Diana Hoppe on Dec 16, 2008 11:01 AM

The SAP MII component hierachy in the SAP Customer Support System has been changed. MII components will be listed under MFG (SAP Manufacturing) on November 22, 2008, instead of the previous XAP-MII component.
As of this date, all NEW messages can only be recorded under the new component identifiers.
The new component hierarchy is as follows:
MFG
- MFG-MII   (SAP Manufacturing Integration and Intelligence)
- MFG-MII-CON (MII Content)
- MFG-MII-CORE (MII Core Development)
      MFG-MII-CORE-BSC (Business Suite Connectivity)
      MFG-MII-CORE-DTE (MII Design Time Environment)
      MFG-MII-CORE-RTE (MII Runtime Environment)
- MFG-MII-SFC (Shop Floor Connectivity)
      MFG-MII-SFC-PCO (MII Manufacturing Data Services
      MFG-MII-SFC-UDS   (Universal Data Services)
Edited by: Diana Hoppe on Dec 16, 2008 11:01 AM

Plz: meaning of this sentence : MDM works out of box with sap BI component

hi
please explain me what is the meaning of :
SAP MDM works out of box with sap BI component .
Message was edited by:
akhil k

Hi akhil,
In lines to what Simona has said, I would like to mention that SAP MDM is a different tool altogether and functions out of the box with SABP BI.
Talking a bit about the integration scenarios, SAP MDM SP04 is integrated with SAP BI 3.5 as two different tools where MDM behaves as a different tool altogether and imports the data from BI and cleanses it and then syndicates it back to BI.
In the latest integration scenario, some part of MDM can be handled from Bi itself. i.e. We can connect to the MDM SP05 Repository from BI 7.0. But still the data cleansing, deduplication is exclusively done in MDM. Hence MDM works out of the box with SAP Bi component.
Thanks and Regards
Nitin Jain

SAP interface component AMI

Hello,
we have installed ECC 6.0 EhP7.
As i know, SAP interface component AMI is included , or?
Did i need to install or activate something in the ECC System to use "SAP interface component AMI" ?
Gruß
Toni

Hi Antonio,
You need to activate the Related Business Function in ECC System.
Transaction: SFW5
Business Function rElated to AMI
ISU_AMI_1, ISU_AMI_2, ISU_AMI_3, ISU_AMI_4A, ISU_AMI_4B.
Thanks, Mohit

See patch level of SAP-XIAFC component

Hi Experts,
How can I see what patch level of SAP-XIAFC component is installed in my environment?
I see the SP in the SLD (Software Component), but I do not see the patch level.
Any idea?
Thanks in advance.

Ok,
In the System Info see my component:
sap.com SAP-XIAFC 7.00 SP20 (1000.7.00.20.0.20090814221359) SAP AG SAP AG 20090914191451
SP20 ok?
But in SLD, in Software Component, I see:
XI ADAPTER FRAMEWORK CORE XI ADAPTER FRAMEWORK CORE 7.00 sap.com
in the tab "Support Packages":
Support Package 11 of SAP-XIAFC, 7.00 SP011 011
Why is there this difference?
Tks in advance.

DDIC Activation error during SAP_HR component upgrade in ECC 6.0

Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,

Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G

SAP HR component upgrade

Similar Messages

Maybe you are looking for