Sap HR: how to create Thusda halfday to a ep group

Hi,
I wana create periodic work schedule in which,ever thusda is halfda should be there. working days mon-friday. sat-sun off. Thusday should be halfda.
is it posible to create this by using "RULES FOR VARIENTS" under daily work schedule nod"
if i have to create it by using separate daily WS only for thusday.
*****plz let me know how to create it b using RULES for VARIENTS.
akhil

You will need to group these particular emps into a different grping, define a PWS for them as per the conditions u need and then create a WSrule for this particular grouping.
Regards,
Shreyasi.

Similar Messages

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create new plant,purchasing org,purchasing group

hi,
how to create:
1. new plant
2. purchasing org
3. purchasing group
4.storage location ... in SAP-GUI
rgrds,
Piyush

Hi Piyush,
As path has been already provided in previous post.
For New Plant :
Once you are in define-copy-delete-check plant.
select Copy-delete-check plant
thne press F6 for copy org. object
Usally copy-delete-check plant is selected it will copy all exisiting tables of that plant to new plant.
For new Purchase Org. :
Once you are in screen select "new enteries "or "copy as" whatever you like.
Then you have to assign purchasing orgnization to plant or company code.. in aasigment > Materials management
for New Purchasing group :
From path already mentioned earlier either create new or copy as ...
moreover there is no assigment needed its just a group of purchasing . You can use p.grp with any p.org if checks are not there however these checks will be there based on procurement process. In our orgnization its there. ie System will not allow you to use some purchasing group for import / sub contracting etc.
For new Storage location I have already posted in your previous thread.
Regards,
Aakash
Edited by: Aakash Raval on Dec 29, 2008 11:15 AM

How to create & Assign unique Qualification level and Groups(Each trans.)

Hi,
While working on CRM_LEAD i have observed that i cannot create unique Qualification level or Groups/origins for each transactions, if i add one more Qualification level or Groups/origins in existing table it is reflecting in all corroseponding Leads.
Please tell me how to create seperate Qualification level and Groups/origins for each Transaction, else we can use Authorisation Object for this.
Please resolve.
Regurds,
Dipesh.

Hi Chirag,
I've read the following link, but the question is....
- Where is the link to create transport groups? That is my only question It's as easy as that
Found it...sorry I knew it was easy
Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM

How to create a new request for function group?

Hi Friends,
My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
Thanks,
Kaarthick.V

Hi Karthick,
If you want to Change the request for your FG means,
1. Go to SE80 -> work bench -> Edit object.
Here you have the option two change the request.
or If you want to create the Function Group means,
Go to SE80 -> Select Function Group -> Enter name -> press Enter
Thanks,
Reward If Helpful.

Regarding sap script how to create first page and next page

could u plz let me explain the steps for creating
WE HAVE " PAGE BUTTOR" IN THE FORM.
THERE WE CAN CREATE MULTIPLE PAGES
I HAVE ONE MAIN WINDOW FOR "FIRST PAGE"
I HAVE ONE MORE MAIN WINDOW FOR "NEXT PAGE"
LIKE THIS
HOW CAN I TEST THE MULTIPLE PAGE S
EXPLAIN CLEARLY
FIRST PAGE
NEXT PAGE
THIRD PAGE
FOUTH PAGE
IN SAP CERIPT FORM

hi
in ur script u have page button click to it and now do this
goto
EDIT-->Create Element
after this u have an pop-up
now enter ur page name and description here and press enter
insimilar manner creat the pages that u want
Now once uahve created the pages click to windows button
and do this
EDIT-->Create Element
after this u have an pop-up
now enter ur window name and description here and press enter
Now once u have created the windows click to page window button
here u will give the page name in the box and do the same
EDIT-->Create Element
an popup will apear select the window u want to have on this window ok
now code inside this window
Hope this will solve ur problem
Cheers
Snehi Chouhan

I'm very new tp SAP ABAP, how to create a function module..V.URGENT

hi folks,
I'm very new to sap abap.
I want to create a function module.
the following is my requirement.
by passing(eporting parameters to funtion module from pgm point of view) a field, i want to get(importing parameters from the funtion module, from pgm point of view) some 7 fields(of various tables).
please also tell me how can code an inner join for tables 5 tables(a,b,c,d,e). i'm joining a on b, b on c, c on d,the problem here is that i can not join d on e as there are no common fields in d and e.
can i join e and c or b, there are no common fields even in a and e.
please tell me the solution as soon as possible, this very important and urgent deliverable.
thanks in advance

Here is link for creating function modules
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm">Creating Function Modules</a>
Regds
Manohar

How to create a custom search portlet that groups results by category

Hello,
Is it possible to create a custom search portlet whose search results are displayed on a page grouped by Category? Basically the results page should have Category heading followed by search results.
I realize this is not canned functionality but any ideas on how to accomplish this using PLSQL APIs is also welcome.
Thanks.

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

How to create a view to show files Group By Title and Version

Hi,
I am trying to create a view in a document library as follows.
1. Group by File Title.
2. Group by Version.
like following image
- In this image i want to replace "Version:" with file name.
- In next line, DocV1 has 3 versions. Then it should be displayed in a stacked version with latest version at top and next 2 versions below it.
Please tell me how could i do that?

check this link
http://stefan-stanev-sharepoint-blog.blogspot.in/2009/08/how-to-display-all-versions-in.html
Latest approved version
http://stackoverflow.com/questions/1366242/find-latest-approved-version-of-an-splistitem
http://office.microsoft.com/en-in/sharepoint-server-help/view-the-version-history-of-an-item-or-file-in-a-list-or-library-HA101853104.aspx
SPListItem listItem =
// wherever you are getting this from
SPListItemVersionCollection listItemVersions = listItem.Versions;
if (listItemVersions !=
null && listItemVersions.Count
> 0)
    foreach (SPListItemVersion item
in listItemVersions)
        foreach
(SPField field in item.Fields)
            // Do Something to get latest

How to create a site and add security groups through code: scripts, csom, ... ?

Hi,
I'm new to CSOM and are looking for a way to create sites in SharePoint Office365 and especially add user to it with a specific role eg. 'visitor' or 'owner'.
I use this code to add sites from a csv file, so far so good.
But now I want to add security groups based on the csv file and assign a role. The security groups allready exists.
and also how to add a user with a 'owner' role for some sites.
That would make my life easier :-)
so thank you in advance!
# load assemblies
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.dll"
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
# site collection
$siteUrl = “https://mysharepoint.com”
# admin
$username = "[email protected]"
$password = Read-Host -Prompt "Enter password" -AsSecureString
# get clientcontext as object
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
# assign credentials to clientcontext object
$credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$ctx.Credentials = $credentials
# create site from template 'teamsite' => STS#0
$data = Import-Csv "c:\tools\CSOM\vakwerking_test.csv"
foreach ($row in $data) {
$webCreationInformation = New-Object Microsoft.SharePoint.Client.WebCreationInformation
$webCreationInformation.Url = $row.vakwerkingurl
$webCreationInformation.Title = $row.vakwerkingnaam
$webCreationInformation.WebTemplate = "STS#0"
$webCreationInformation.UseSamePermissionsAsParentSite = $false
$newWeb = $ctx.Web.Webs.Add($webCreationInformation)
Write-Host "Title" $newWeb.Title
#send to sharepoint
$ctx.Load($newWeb)
$ctx.ExecuteQuery()

Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to create a clip mask for a group?

I have created a hue/saturation adjust that I want to use as clip mask for a group of layers. How do I do that? I can create a single layer clip mask of hue/saturation but not a whole group of layers.

You can nest it with its adjustment layer in another group and set that group to normal (instead of pass through). But setting the second group to normal may affect any blending you have going on in the first group.

How to create a FSV with the text groups in spabish and English

Hi gurus,
could you help me with a issue. I want to know where i can add the text in english in the groups of the fse2 , because i have tha configuration with spanish text but when i execute the f.01 with the language EN the system do not give text in English. So could you help me?
best regards!

I just tried it with our FSV, system language is EN and i executed the report in DE. I could see german texts but not on the FS items.
I dont know, if that is possible because these are custom texts/input fields from you as compared to the system text converted to the required language on the report header and other layout fields
If you want the FS items to also show text in 2 languages, i recommend creating another FSV in the alternate language and using it.

HT4968 How to Create Birthday Calendars using different contact groups.

I am trying to create photo calendars as a gift including birthdays using either iCloud or iPhoto 11. However each calendar is different - do not want all birthdays on all calendars. I've tried creating separate contact groups but it seems they all appear no matter what. Isn't there a way to create a master birthday list and assign each person to the calendars that I want the birthday to appear on?
I am using Mac OS X 10.8.5 and have Adobe Creative Cloud, iPhoto, etc.

Hi Chirag,
I've read the following link, but the question is....
- Where is the link to create transport groups? That is my only question It's as easy as that
Found it...sorry I knew it was easy
Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM

How to create a sample from a target group

Hi experts:
When I create a target group I want to create a sub target group of this. (a sample)
The objective is to test a marketing campaign with a sample, according of the results we decide to make the real marketing campaign with all the members of the original target group.
Thanks in advance for your inputs
Susana

Hi
The CRM version is 7.0
Thanks
Susana

How to create a dynamic menu for each group of responsibility and user

Hi
I am using Jdev 11.1.1.6 and new to ADF, my application require to populate menu which would be different for different groups of user, and the user in each group would have different submenu depends on their responsibilities assigned to each one of them.
so on the top level would be menu_top_item1, menue_top_item2
|-->submenu1_1 |-->submenu2_1
|-->submenu1_2 |-->submenu2_2
also the menu would need to be on_mouse_over to show the submenu items or collapsed back.
any idea what would be the best approch? or is there any example around?
thanks a lot

You can use ADF Security to control access to menu options.
More about ADF Security here:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfSecurity/AdfSecurity.html
If you also use WebCenter you might use their menuing option:
https://blogs.oracle.com/shay/entry/webcenter_portal_intro_for_adf

Sap HR: how to create Thusda halfday to a ep group

Similar Messages

Maybe you are looking for