Sap hr IAPI instance

Hi
We're testing SAP HR ActiveSync with IDM5.5 , SAP .
There are two questions about SAP HR Active Sync.
1. When I started SAP HR Active Sync I can't find IAPI task instance.usually other resources makd task instance to keep last changelog-ldap or timestamp.do I something wrong? or SAP HR active sync resource adapter doesn't create IAPI~ task ?
2. How SAP HR Active Sync keep history? If several IDoc created while Active Sync was off , when aitive sync is on IDocs are not inserted to IDM? I wonder.
Please let me know if there is limitation using SAP HR Active Sync.
I really appreciated

I wonder if you could consider re-starting your career through contributing a little on SCN. I mean: I would like to see a "new balance" between your posts and points. Why don´t you pay something back? Would be just great...
Otto

Similar Messages

SAP Service named SAP SID _ Instance Number is missing in services.msc

Hi,
SAP Service named SAP<SID>_<Instance Number> is missing in services.msc
Example :
SID = DM0
Instance Number = 01
SAP Service Name = SAPDM0_01
Please help me to resolve the issue.
Thanks in Advance.
Warm Regards,
Sathya

SAPSTARTSRV.EXE
Values :
Operation Selected is "Install Service + Register COM Interface + Start Service"
SID = DM0
NR = 00 or 01
Startprofile = D:\usr\sap\DM0\SYS\profile\START_DVEBMGS01_sapserver
User = DOMAIN\SAPService<SID>
Password = ....
Now the SAP Service, SAP<SID>_<Instance Number> is created in services.msc.
Thanks www.sdn.sap.com
Edited by: Sathya Kala Veeraraj on May 6, 2010 12:12 AM

SAP R/3 instance does not match the number of columns in schema error

Hi Gurus,
Badly need your help, I am currently on dead end here, I cant' think of any resolution for this error message, I have tried almost everything trying to resolve it. Kindly advise..
error msg:* 1306806 3342 R3S-140113 3/23/2010 9:54:47 AM The number of table columns <0> in an R/3 instance does not match the number of columns <8> in schema. Operation*
source: R/3 database
target: Oracle 10G DBase
Tool: Busines Objects Data Integrator 11.7
Many Thanks!
Randy Reyes
Philippines

Hello,
Maybe the following is applicable in your case:
I don't know exactly what you are doing in the BOBJ system but are you using an RFC read table function?
If yes this may be the problem. RFC ReadTable is OK to do some tests but is not scalable. Plus there is a limitation
with the RFC_READ_TABLE function in terms of number of characters returned (up to 512 characters), you
should use R/3 dataflow instread:
Please find below the link which explains how to use the R/3 Dataflow:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/readingviaABAP
I hope this helps,
Best Regards,
Des

SAP HA ASCS Instance service Shared Memory Problem

Hi Gurus,
I have completed the setup of ASCS and ERS instance for SAP HA. The system was working fine, but yesterday when I was trying to start the ASCS instance, it shows following error in the dev_enqsrv log file.
ShadowTable:attach: ShmCreate - pool doesn't exist
Enqueue: EnqMemStartupAction Utc=1267507616
Enqueue Info: replication enabled
Enqueue Info: enque/replication_dll not set
ShadowTable:attach: ShmCreate - pool doesn't exist
ERROR => EnqRepAttachOldTable: failed to get information on old replication table: rc=-1 [enxxmrdt.h 393]
EnqRepRestoreFromReplica: failed to attach to old replication table: rc=-1
enque/backup_file disabled in enserver environment
***LOG GEZ=> Server start [encllog.cpp 493]
For resolving this error, I have performed following steps:
1. cleanipc 04 remove ( where 04 is the instance no for ASCS instance)
2. saposcol -k to stop the saposcollector and release the shared memory.
3. Also performed some steps like saposcol -d, kill , leave, quit.
After doing this steps, the same error is been generated in the dev_enqsrv log file. The only problem with this is the ASCS instance is starting , but while checking the log file available.log, it is changing the staus from available to unavailable every 30 secs.
Appreciate any response.
Regards,
Raj.

Hi,
important to know is your NW kernel version and the setup of your file systems.
The error message could be no real error. It could be just the indication that there is no replicated enqueue table available and therefore the enqueue server of the starting ASCS instance is not able to attach to any existing table. It would create a new one. But: If you start your ASCS on the node where the ERS was running and you see that error message, that indicates that the replicated enqueue table couldn't be attached on your starting enqueue server, which is a critical error in a failover scenario.
Check following help.sap.com site for details how enqueue table replication works:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/e023f3bf423c83e10000000a42189c/frameset.htm
The available.log has this confusing entries if you have your /usr/sap/<SID>/<Instance>/work directory on a clustered file system which is present on both nodes. In that case, the sapstartsrv of the ASCS on the active node will write to the log file that the instance is available, whereas the sapstartsrv of the ASCS on the passive node will write to the log file that the instance is not available. It's a bug, but there are several possibilities to workaround.
If you need documentation of SAP HA on SLES or RHEL, I can post the links of the whitepapers here.
Best regards,
Matthias

Conflict between 2 business services for the same SAP R/3 instance

Hi,
We developed a packaged solution that connects to SAP R/3 with RFC Adaptor and idoc Adaptor.
We deliver design and configuration packages defining the entire integration schema between an external system and SAP.
The configuration defines a business service BS_SAP_R3 containing RFC and idoc communications channels.
When we deploy and configure the solution (design and config) on a XI instance we have a conflict.
As the XI already contains a Business Service connecting to the same SAP instance (other integration) we want to use with our business service BS_SAP_R3, we have an error when configuring the Adapter-Specific Identifiers properties R/3 System ID and Client from the section IDoc Adapter and RFC Adapter with the message, for the BS_SAP_R3
Check Result for Object BS_SAP_R3
SAP system ID D46 and client 800 already exist in service | BC_TEST_SAP_R3 
Is there a way to solve this conflict problem?
Thanks for your help.
Adalbert

Dzieki za odpowiedz
Could you give more details about the design issue and what you have on mind?
I also suspect a design issue but do not know how to solve it...
If in your Configuration you have 150 Receivers Determinations, Interface Determinations and Receiver Agreements referencing the same BS business service to access SAP, can you make the service configurable in any sort
Can you recommend another solution?
The only solution I see it to regenerate all the configuration by hand using the already exiting SAP BS But for 150 objects it is not a real solution...
Thanks for your help
Adalbert
Wojtek

Starting and Stopping SAP Systems and Instances on Windows

Is there a way to automatically stop/start instances on windows at boot time?
I don't want to have to logon after a reboot and go into the mmc and start the app manually.
Thanks,
Dan

Dan ,
As Juan said it could cause problems while starting SAP at startup.
Still if you really want to implement this...
This is what I have found ... I never tried this but hope this should work.
1. you must make sure that SAP[SID]_00 service is set to start automatically.
2. you must edit your SAP START profile and add this line:
Autostart=1
3. make sure that the line you added IS NOT the last one in your file. if it is, your added parameter could be ignored.
to test this out, shutdown SAP and your database, then shutdown the SAP[SID]_00 service. now start it. open SAPMMC to see if you see any starting activity. it should work fine.
Let us know if it works.

OIM11gR2 - How can I list users with an SAP User Application Instance?

Hello,
This is a feature I was used to in OIM9.
Except that in OIM9 the model was a bit different, we had no application instance. We referred to it as a Resource.
Anyway, as an Identity Manager administrator, I wanted to quickly find a user with an specific Resource, e.g. SAP User.
I went to Resources, choose the resource I'm interested in finding the users, then from there I could filter them by Resource Status, either Provisioned, Provisioning, Revoked, Disabled, etc.
Now in OIM11gR2 I can't find an equivalent for this.
From /sysadmin I cant list users from the Application Instances
From /identity I cant search users with a given Application Instance.
Did I miss something? or this cannot be done in OIM11R2.
(Alternatively, I opening SQL Developer and listing the UD_SAP table, but this is obviously not acceptable)
Thanks for an insight.
Adr

this is a problem of realm definition.check the config.xml, you've got an invalid realm declared.

How to connect to SAP HANA Trial Instance using ODBC

Hi,
I am a newbie to SAP HANA. I have a trial account and have created a new SAP HANA instance using it. I have also installed the HANA Client Tool(Dev edition). I wanted to create a ASP.NET application to consume HANA database on trial instance. Creating ODBC connection requries server:port that are not available in case of trial instance. Can this be done ?
Instead can I create a Java application that consumes HANA database on trial instance using JDBC ?
Need an answer ASAP. Thanking you in advance.
Bhavya

Hi Vladimir,
I am trying to connect to an HCP system from outside java code using JDBC.
I could not find out how what will be the jdbc url and how to get that port no.
Say for example the cloud system is https://account.hanatrial.ondemand.com/ and instance no is xyz. then waht would be the jdbc url?
"jdbc:sap://xyz.hanatrial.ondemand.com:30015/" - this is not working.
Regards,
Raja

Connect SAP HANA Studio with SAP HANA One Instance Reg 70

Hello,
i have already create an instance and set all passworts in Management One Console.
If i want to add a new system in Hana studio a got an error message: "Database connection is not available"
SAPControl request failed. Cannot retrieve JDBC connection for: ...
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for more details.
at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:295)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:238)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:84)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sap://xxx.eu-west-1.compute.amazonaws.com:30015 [Cannot connect to host exxx4.eu-west-1.compute.amazonaws.com:30015 [Connection timed out: connect], -813.].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:219)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:186)
at com.sap.db.jdbc.Driver.connect(Driver.java:238)
at com.sap.ndb.studio.jdbc.JDBCPlugin$3.run(JDBCPlugin.java:590)
I must add, that i test it in the firm's intranet. So we have diverse firewalls. What firewall settings has our IT department change, for enabling the database connection?
Hope you can help me.
CT

Not related to UI Development Toolkit for HTML Developer Center. Moved to SAP HANA Developer Center community.
Regards, Mike (Moderator)

Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

I've got a new SAP 1.72 instance on AWS that's not working at all.

It worked fine the first time I booted it up but now I keep getting errors. I've tried rebooting the server but it didn't help. I can't seem to find anything on Google as to the error messages I'm getting. The first on the list when I connect is;
     Unable to find Action Set: com.sap.ndb.studio.sqlscript.debugger.ui.sqlscriptdbgdebugActionSet
Next I get;
SAP DBTech JDBC: [2566]: distributed environment error: no servers found;_SYS_STATISTICS:STATISTICS_ALERT_LAST_CHECK_INFORMATION
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [2566]: distributed environment error: no servers found;_SYS_STATISTICS:STATISTICS_ALERT_LAST_CHECK_INFORMATION
    at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
    at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:174)
    at com.sap.db.jdbc.packet.ReplyPacket.buildExceptionChain(ReplyPacket.java:100)
    at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1141)
    at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
    at com.sap.db.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:929)
    at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
    at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:256)
    at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:228)
    at com.sap.db.jdbc.trace.Statement.execute(Statement.java:79)
    at com.sap.ndb.studio.jdbc.util.SQLExecutor$1.run(SQLExecutor.java:118)
I'm not sure what to look for. Any ideas?

Hi Joe / Jon-Paul,
I have also encountered this issue, after creating a new view on the WILE dataset the following error occurs
SAP DBTech JDBC: [2566]: distributed environment error: no servers found;_SYS_STATISTICS:STATISTICS_ALERT_LAST_CHECK_INFORMATION
om.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [2566]: distributed environment error: no servers found;_SYS_STATISTICS:STATISTICS_ALERT_LAST_CHECK_INFORMATION
      at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
      at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:174)
      at com.sap.db.jdbc.packet.ReplyPacket.buildExceptionChain(ReplyPacket.java:100)
      at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1141)
      at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
      at com.sap.db.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:929)
      at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
      at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:256)
      at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:228)
      at com.sap.db.jdbc.trace.Statement.execute(Statement.java:79)
      at com.sap.ndb.studio.jdbc.util.SQLExecutor$1.run(SQLExecutor.java:118)
I have stopped the instance and restarted this however the error persisted. It seems to be occuring when anything new is created and an internal process checks for the _SYS_STATISTICS:STATISTICS_ALERT_LAST_CHECK_INFORMATION table. After reviewing other posts I checked the _SYS_STATISTICS table distribution for my instance and came back with message no table found. Seems that this _SYS_STATISTICS schema is not included in the new instance build.
Will investigate further but not looking good at this point in time.

SAP Cluster Installation instance number issue

Hi,
We had some problem about the sap cluster installation .
OS : AIX 6.1
Database : DB2
We are trying to install the sap cluster under AIX + DB2.
But we are not sure whether we have
CI instance = 00
DI instance = 03
will it have problem . ( e.g. will we need to adjust the transport
configuration eachange due to the instance number different )
Because we had saw other case on window which is
CI instance = 00
DI instance = 00
So which is working fine and no problem.
Please help and give some recommendations. We would like to confirm is window / aix the same , are there any concern here( CI instance is need to different
with DI or not , if not what will be affect. ) .
Regards

Hi,
Per my understanding the
stms > system overview > [SID of the cluster] > Display TMS Configuration : System xxx > communicate tag > RFC Address
on that column is not able to use logon group.
But if you not setting that part correctly , then the auto transport is not able to do e.g. QAS forward the request to PRD
Am I correct ?
thx,
Tony

Managed System Config: Wily BC path /usr/sap/ SID /JC instance is not a directory for BI Java Instance

We are getting error message "Wily BC patch /usr/sap/<SID>/JC06 is not a directory while doing managed systems setup. System verification is successful. The Java directory should be /usr/sap/<SID>/J06 in our case, which is showing correctly in LMDB. Any idea?
I have done the usual resynch SLD, Rerun system verification and reset managed systems configuration etc.

Hi Tariq,
Please enter complete path like below and check :
/usr/sap/<ManagedSID>/<InstanceID>/ByteCodeAdapter
Also check below SAP note for details :
1943583 - Wily Agent Directory files are Missing after Network loss - Solution manager 7.1
Hope this helps.
Thanks & Regards,
Nisha

Install a Test/Dev instance for SAP MII.

Hi,
I want to install a test/development instance for SAP MII on my laptop [2 GB RAM].
Per my understanding, for this i would need set up SAP NetWeaver CE instance and deploy SAP MII 12.1 component.
I also want do some custom development & integration with SAP through MII to SAP ME.
As per Master Guide SAP MII 12.1.pdf, we need to Install SAP NetWeaver CE 7.1 EHP1 SP03.
Since its a test/development instance can i install [SAP NetWeaver Composition Environment 7.2 Developer Edition|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab] and deploy MII.?
Or do i need to have some specific version of Netweaver CE.
Please let me know what are steps to install a Test/Dev environment for SAP ME/MII integration..
Please advice.
Thanks un advance.

MII 12.1 has not been validated on NWCE 7.2. And MII 12.2 is validated on NW 7.3, skipping NWCE 7.2. It may install fine, but you will most likely run into problems executing some of the functions and features of MII.
Regards,
Mike

Multiple Production Instances in a C460 SAP Appliance?

Hello,
Is it possible to run 2 SAP HANA Production instances (ECC and BW) on the same C460 appliance with TDI storage?

We have implemented similar solutions to take advantage of a server that otherwise be redundant for the majority of the time and it does work well, I have not personally done this type of configuration on unix using OPMN but have on windows using failover clusters, I feel OPMN is a bit poor in terms of management and lacks functionality so maybe worth considering Oracle clusterware depending on the flavour of Unix.
You could also look at look at virtualisation options as an alternative.
Cheers
John
http://john-goodwin.blogspot.com/

Sap hr IAPI instance

Similar Messages

Maybe you are looking for