SAP HR new joining, plz help!!!

Hello Experts,
I'm new in SAP HR, have just shifted career from HR Dept. to SAP HR Consulting Dept (I work for ERP Services Comp.). Over the last 3 months, I've spent fulltime on self-research on SAP HR but it is such harsh work when I don't have any guidline or material. Could any of you give me some suggestion of the approach steps to get to know SAP HR?
Btw, I'm reading the SAP HR serial tutorials of appx. 30 pdf files (HR505, HR100...) but it is a little bit theorical and i can't figure out about the acctual job (the IMG invironment? real implementing steps?...)
Points are awarded for helpful guidline and thanks in advance.
Best regards,
Huynh Thanh

Hi Huynh,
As You worked domain, I hope you are good in Business Process in HR.  First do configuration for Enterprise Structure and Personnel Structures. If possible get one bbp from some of your network, understand that and start configuration accordngly.
This would be good rather than reading all mentioned pdf files.
Regs,
Brahma

Similar Messages

  • Error 1430 occurred at Open/Create/Replace File in NI_Fuzzy_Logic_API.lvlib:FL Load Fuzzy System.vi- Untitled 3 Possible reason(s): LabVIEW: The path is empty or relative. You must use an absolute path. Not A Path how can i copy it in new vi plz help

    when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring 
    'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
    untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
    plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlited 

    Hello Nofil,
    This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
    Regards
    Andrew George @ NI UK
    Attachments:
    Fuzzy Tanks with PI.vi ‏31 KB

  • I was having i5 nd its back up stored.nw i got 5s nd den i updated my itunes.For the first tym i connected to itunes.i selcetd it as old device nd it restored my photos which was on old i5.bt i lost my ol d photos of new iphone.plz help me to get dem back

    plz help me dat hw can i get my new photos back which were on new iphone..bcoz dey were nt backed up..as i connected it for d first time through itunes..
    all my preveious photos has been restored..and new one r no more..plz help me..dere were 1000 photos n it

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • Changin 2 new computer can i move across al info 2 my new computer plz help

    im on xp my old computer has got a virus on it and i was wondering can i access it through safe mode some how and copy all my information across to a usb or external harddrive im not bothered abwt the music as i can replace tht but i cant fucntion without my contacts and calender my txt messages and etc please help me if i sync to a new comp it will delete all my old info im so confused dont kwn wat to do

    Welcome to the discussions,
    A manual backup will help. Here's how to:
    Make sure your computer is authorized in iTunes. Disable autosync in itunes, connect your phone, right click on it in the device list and choose backup.
    This will save data, pictures taken with the phone and settings to itunes.
    See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your phone got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    How to back up and restore: http://support.apple.com/kb/HT1414
    How to download apps for free again: http://support.apple.com/kb/HT2519
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    After that, don't forget to include iTunes into your backup routine: http://support.apple.com/kb/HT1382

  • Checkpoint not complete;;cannot allocate new log ;;; PLZ HELP ME

    Hi all,
    We are working on Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on a Redhat Linux Server platform.
    We are facing the following problem in the alert.log file :
    Wed Aug 22 02:58:57 2007
    Thread 1 cannot allocate new log, sequence 43542
    Checkpoint not complete
    Current log# 1 seq# 43541 mem# 0: /u01/oradata/DB01/redo01.log
    Thread 1 advanced to log sequence 43542
    Current log# 4 seq# 43542 mem# 0: /u01/oradata/DB01/redo04.log
    Current log# 4 seq# 43542 mem# 1: /u01/oraindx/DB01/redo04.log
    Wed Aug 22 03:00:00 2007
    Thread 1 advanced to log sequence 43543
    Current log# 5 seq# 43543 mem# 0: /u01/oradata/DB01/redo05.log
    Current log# 5 seq# 43543 mem# 1: /u01/oraindx/DB01/redo05.log
    Wed Aug 22 03:01:00 2007
    Thread 1 cannot allocate new log, sequence 43544
    Checkpoint not complete
    Current log# 5 seq# 43543 mem# 0: /u01/oradata/DB01/redo05.log
    Current log# 5 seq# 43543 mem# 1: /u01/oraindx/DB01/redo05.log
    Thread 1 advanced to log sequence 43544
    Current log# 6 seq# 43544 mem# 0: /u01/oradata/DB01/redo06.log
    Current log# 6 seq# 43544 mem# 1: /u01/oraindx/DB01/redo06.log
    Wed Aug 22 03:01:26 2007
    Thread 1 advanced to log sequence 43545
    Current log# 2 seq# 43545 mem# 0: /u01/oradata/DB01/redo02.log
    Thread 1 advanced to log sequence 43546
    Current log# 3 seq# 43546 mem# 0: /u01/oradata/DB01/redo03.log
    Thread 1 advanced to log sequence 43547
    Current log# 1 seq# 43547 mem# 0: /u01/oradata/DB01/redo01.log
    Wed Aug 22 03:01:38 2007
    Thread 1 cannot allocate new log, sequence 43548
    Checkpoint not complete
    Current log# 1 seq# 43547 mem# 0: /u01/oradata/DB01/redo01.log
    I know that this message indicates that Oracle wants to reuse a redo log file, but
    the current checkpoint position is still in that log. In this case, Oracle must
    wait until the checkpoint position passes that log. Because the
    incremental checkpoint target never lags the current log tail by more than 90%
    of the smallest log file size, this situation may be encountered :
    1-if DBWR writes too slowly,
    or
    2-if a log switch happens before the log is completely full,
    or
    3-if log file sizes are too small.
    I read some posts in this forum regarding this error but sincerly i don't know how to find the exact cause of this error? Maybe Should I add new redo files or one new redo group? I don't know how to resolve it :( ;;;
    such as I have 6 redo files 3 of them 5MB size and the others 3 files 10MB size ;
    Thank you,
    Regards,
    Message was edited by:
    HAGGAR

    Make DBWR write more aggressively - as you are on 9i the parameter I would use is FAST_START_MTTR_TARGET=(how long you want recovery to take in seconds), the lower that number, the more aggressively DBWR has to write to keep up with the target, the advantage of this is that by the time LGWR comes to overwrite the redo log file, the chances are that DBWR has already written the "high scn#" (and beyond) from the checkpoint q.
    -- This disadvantage is that you will get more I/O to your disks.
    2. Create more redo log file groups - this will give DBWR more time to write before LGWR tries to overwrite a particular redolog file, again the chances are that the extra (6th) or (7th) group will give CKPT enough time to completely checkpoint beyond the "highest scn#" before that group is again required..
    Which one to go for.. well that's up to you and your setup, if you have an I/O bound system then 2. would be better for you, as 1. will just increase your I/O problem, however if physical space is an issue and I/O isn't then 1. might be better (with the added advantage that instance recovery will also be faster).
    Sorry for the training session, but as with everything to do with Oracle, there is rarely one solution that apply to everyone...
    Gopu

  • New imac plz help

    today i got my new imac delivered... 320GB.. how come i had 280GB only is that normal? ps: i had tiger installed and installed leopard from the disk.. is there any utility to use to check what's using the hard drive...
    ps: i am quite familiar with tiger (user for 3 years)

    Hi Clive Barbara!
    There have been other threads, but just last night I was looking at the Samsung (hard drive manufacturer) website and copied their answer from a FAQ. You might find it's more than you wanted to know, but:
    "The Capacity of the Drive Is About 8% Lower than What It Should Be
    This is because of the dual meaning of the word "gigabyte," depending on whether it's calculated in binary (base-2) or decimal (base-10) mathematics. A gigabyte means 109 (1,000,000,000) bytes. A gigabyte also means 230 (1,073,741,824) bytes.
    An 80-gigabyte hard drive has a capacity of 80 billion bytes.  Since we think in terms of base-10, when we say "gigabyte" we mean the decimal gigabyte. A computer's architecture is designed on powers of two, so when a computer says "gigabyte," it means the binary gigabyte.
    Therefore, an operating system may display the capacity of an 80-gigabyte hard drive as 74.5 gigabytes. There will appear to be 7.4 percent fewer gigabytes, but each is also 7.4 percent larger.
    In much the same way that a tree is the same size whether its height is said to be 25 feet or 8.2 meters, 80 decimal gigabytes and 74.5 binary gigabytes both refer to exactly the same capacity, 80,000,000,000 bytes."
    Above quoted from the Samsung website.

  • Plz help me to get Projects for Practice

    hi,
         I am vijay recently completed SAP In SD module.Plz help me to get projects for practice

    if you want to put am image into a game use this code:
    try {
    Image Img = Image.createImage("/your.png");
    catch(Exception e) {
    You have to have a try/catch statment to check for errors.
    You can have animated png with sprites.
    If you have a picture thats 32x32 put the next frame into it 32x64 and continue like that.
    I added a link to a good guide to make game in J2ME
    http://www.microjava.com/articles/techtalk/midp2_games?PageNo=1

  • Ipod 5 charger problems plz help

    hey my ipod 5 is chargig but it wont show the charge sign and it charges very slow. how can i bring back the charge sign without restarting or buting a new charger plz help thnx.

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • EXPERTS PLZ HELP ME IN SAP SCRIPT URGENT

    Hi experts
    plz help me
    i m very new in sap scripts
    i have a script WESCHEINVERS1 and the driver prog is SAPM07DR
    i ill have to copy this script and have to add two more feild in the text element W1LGMAT
    fields are :
    CAWNT-ATWTB
    EKPO-REVLV
    now wat i think i cannot make changes to standard driver prog so it wud be better to call a subroutine 4 it
    so plz guide me how i ill have to fetch data nd pass to the script
    plz write the code if possible 4 u
    FYI:
    MSEG : Document Segment Material
    MANDT     Client
    MBLNR     Number of material Document
    MJAHR     Material Document Year
    ZEILE     Item in Material Document
    MATNR     Material Number
    LIFNR     Account number or vendor
    EBELN     Purchase order number
    EBELP     Item number of PO
    EKPO : Purchasing document item
    MANDT     Client
    EBELN     Purchase order number
    EBELP     Item number of PO
    MATNR     Material Number
    REVLV     Revision Level
    LFA1 : Vendor Master (General section)
    MANDT     Client     
    LIFNR     Account number of vendor or creditor     MSEG-LIFNR
    SPRAS     Language key     
    AUSP : Characteristic Values
    MANDT     Client     
    OBJEK     Key of object to be classified     MSEG-MATNR
    ATINN     Internal characteristic     ZO-QUALITY-LEVEL
    ATZHL     Internal counter     
    ATWRT     Characteristic Value     
    CAWNT : Value texts
    MANDT     Client     
    ATINN     Internal characteristic     ZO-QUALITY-LEVEL
    ATZHL     Internal counter     AUSP-ATZHL
    SPRAS     Language Key      LFA1-SPRAS
    ATWTB     Characteristic Value Description     
    thanks in advance

    Refer the links to know about calling subroutines ins cript -
    subroutine in script
    How to call a subroutine in a script ?
    EXTERNAL SUBROUTINE IN SAP SCRIPT
    Regards,
    Amit
    Reward all helpful replies.

  • Help Adobe form - new joiner

    Hi all,
    Can anyone please send me some document or help me some pointers as to how to create an ADOBE form and like form interactive with SAP?
    I need use the Adobe form for a Purchase Request.
    Eventually could me indicate some standard forms?
    We've Abap Dynpro.
    Kindly reply immediately as this is urgent.
    Regards,
    Gaetano
    P.S.: we've new joiner for this argument

    Hi Gaetano,
    this link takes u through various documents for craetion of WD applications in abap for Interactive forms
    https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3 [original link is broken]
    Hope this helps,
    Best Regards
    Amita

  • My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

  • In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    Go to System prefs
    Select Mail Contacts and Calendars
    Then select Other
    Then select "Add a Mail Account and click create
    Then go to google for the settings you need:
    First here for the settings online at gmail http://tinyurl.com/du3fu
    Then here for the setting in mail http://tinyurl.com/38fevm8
    These are instructions for Mail 4.0 but all of the necessary settings should be listed.

  • HT204053 I can not get my Icloud to work on my iphone and ipad since i set up my new email addy on Apple Icloud won't let me change it on those devices ...Plz Help Shey

    I can not get my Iphone or ipad to except the new email address that is now on Apple so nothing will back up or work on Icloud on those devices Thx plz help Sheyw

    With iCloud on the phone, you will need to remove the account, then add it back in with the new address.  It is a bit awkward, but the only way to change the AppleID for the iCloud account login is to delete the account then add it back with the new credentials.  You won't loose anything as the iCloud account is still the same one, you just need to re-associate the AppleID credentials for it on the iPhone.

  • Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment detail

    Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • Plz help for upgrading to new OS X Mavericks

    I purchased MacBook Pro in May'11 with Mac OS 10.6.6 installed. Few months back i downloaded DMG file elsewhere for upgrading to10.6.8 and successfully upgraded without loosing any file & other OS i.e. WINDOWS XP. Now i wish to upgrade to new OS X 10.9.2. Plz help me for doing so.

    Thanx for replying, but there is no Apple Store in INDIA, there are  only resellers. I approached the outlet from where i had purchased my  MacBook, but he has refused for update.
    Plz tell me if i can get STANDALONE INSTALLER from "apple.com
    ". I searched for one which updated directly from 10.6.8 (my present OS) to 10.9.2 at "http://support.apple.com/kb/HT1338?viewlocale=en_US", but in vain.
    Please let me link from where i can download installer in a PC working on WINDOWS 7 with gud internet speed.
    Regards,
    Alok

Maybe you are looking for