SAP HR or SAP SRM or SAP BI expert advice

Dear SAP experts
Greetings!
My profile -> SAP technical consultant which includes :-
1. 5 years of experience in sap abap in R/3 core modules
2 With ABAP webdynpro experience
3. Done one ABAP HR support project and having good understanding to PA and Payroll module from technical point of view
4.Completed one SAP SRM 5.0 implementation project and have good srm techinical skills
5. Good understanding of SAP workflow
Now i feel i must enhance my skill in functional side but i am really confuse whch area i should go
SAP HR or SAP SRM or SAP BI ( Please note i don't have any technical knowledge or background in BI).
Which module have better market both in terms of career and oppurtunities.
Many thanks

HR is not difficult and use a lot of custom development. Easy start
SRM: no idea
BI: since you have nothing to start with, I would no go for this one. Start somewhere else and try to concentrate on that field together with BI. That could help you start with BI later.
Otto

Similar Messages

How to get Plant address from SAP R/3 to SRM

Hi Gurus,
We need to retrieve the plant address from SAP R/3 to SRM and display it in the output list of the report (SRM).
Suggest any standard FM or should we need to create a Custom Remote enabled FM and put the select query to get the address.
Regards
Paul

Hi Paul,
Try using the RFC_READ_TABLE function module...
Pass the table name as t001w which contains the plant details.
Hope this helps.
Thanks,
Pradeep

Attachments from SRM to SAP R/3

Hi,
We are currently setting up the DMS for document attachments from SRM5.0 to the SAP R/3 backend, and have followed the customising steps for both SAP R/3 and SRM accordingly.
In the process, we attach documents to the SC. The follow-on document created is a PR. The problem that we face is when we view the PR from ME53N, and select the Services for Object the attachments link is greyed.
However, in transaction CV04N, we can see the attachment/s via the object link (referencing the respective PR and item no.)
Also, if one creates a PR directly in the SAP backend, and then create an attachment via the Services for Object, you can see the attachments and the link is not greyed out. This attachment can also be viewed via CV04N
I have been through many of the links on SDN, and can not find any possible solution that describes this problem. Is there any additional customising that is required for this link to be visible and not greyed out when viewing PRs created from SRM?
Anyone experienced the same issue? If so, how did you resolve it?
Many thanks and best regards,
Alan Brouard

Hi Nacho.
Sorry the bad news, but account is not transfers from SRM to ECC or from ECC to SRM in contracts.
The Contracts goes between systems via IDOCs (BLAREL)
As you can see in transaction WE60, IDOC BLAREL02 has not account data.
Regards.
Raúl.

How to transfer Vendor from SRM to SAP R/3

Hi...
How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
regds
Kumar

Hello Kumar,
Please find the SAP documentation:
http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
Other useful threads.
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor data transfer from SRM to R/3.
Hope this helps.
Thanks
Ashutosh

Product Contract and supplier data transfer from SRM to SAP XI

Dear MDM Guru's
I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
Please help.
Regards
Jacob

HI Jacob,
I believe below documents will give you the information which you are looking.
[SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
[SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
[SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
Please revert if you still get any question, after going though these documents..
- Shiv

Activate CCMS for SAP SRM with SAP DB

Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful      system_failure
Name and Server     : SRM - olda8002
DBMRFC Function     : DBM_EXECUTE
Command             : db_state
Error               : System Error
Error Message       : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server     : SRM - olda8002
   DBMRFC Function     : DBM_CONNECT
   Error               : Communication Error
   Error Message       : Error when opening an RFC connection
   4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
Thom

Hello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
     Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
    Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
       dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
    <IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
     SAPDB_DBM                        SAP DB dbmrfc server
    SAPDB_DBM_DAEMON                 SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
    Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
   & Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
   Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
    /nsm21 -> check the system errors.
    /nst11 -> check the errors in the corresponding dev log of WP.
   Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina

Handling lease PO from SRM to SAP

Hi SRM gurus,
I am in a fix can someone please help me out in sharing their expert Documentation on standard industry practice about how to do lease PO from SRM to SAP. appriciate a quick response on the same.
You can send the required documentation to the following mail ID
[email protected]
Thanks in Advance.

Leasing with SRM
/people/mustameerahmed.khan/blog/2009/12/31/leasing-with-srm
by
Mustameer Ahmed Khan
br
Muthu

Procurement(P) card Implementation SRM Classic & SAP R3

Hi,
I am looking for Pcard Implementation for SRM 4.0 Classic scenario .
Anyone have experience about the PCard Impementation for SRM or SAP R/3 ?
We have following queries related to PCard Implementation :-
1. How to get file from bank having transaction details ?(Communication between Bank & SRM)
2. How it would be handled for collective invoice against single procurement ?
3. Posting invoice to SRM/SAP R/3 using Idoc/BAPI ?
4. And also how the flexibity to change the account assignment will be provided in SRM/SAP R/3 ?
I observed using Third Party tool its possible but we are looking without Third party tool .
Thanks,
Sachin

Hi,
P card is not supported in Classic scenario as a standard.
Thanks,
Manu

Xi-mdm,bi-mdm,sap-mdm,crm-mdm,srm-mdm integraion ?

hi Experts can any body send me the documnets
for sap- xi -mdm integraiton
sap r/3 mdm- - bi integraions
sap mdm-crm integraion
sap mdm-srm integraion
please any body send me the screen shot and details to my main id
praveen.sapmdm @gmail.com
Edited by: g.praveen kumar on Jun 19, 2008 8:56 PM

Hello Praveen,
you can refer the threads for CRM-MDM integration as mentioned below:
Configure CRM with MDM !!!
Connecting MDM to CRM
Integration of SAP CRM with non-SAP-Systems
To integrate the SRM or CRM System with MDM, you might be need some middleware like XI/PI in between.
You can configure the MDM generic extractor to replicate the referance data (lookup table data, Transaction-MDMGX).please refer the thread as mentioned below:
Re: MDMGX Transaction in R3-XI-MDM Scenario
you can also use the standard transaction "MDM_CLNT_EXTR" to replicate the main table data fro SAP System to MDM.I am not sure that this will work for SRM or CRM System. I have used it in case of R3 System. you can refer the SAP NOTE-1035601, 836985 for this transaction.
Also can refer the threads as mentioned below on MDM_CLNT_EXTR:
Working of MDM_CLNT_EXTR transaction
MDM_CLNT_EXTR Configurations
Working of MDM_CLNT_EXTR transaction
For more on SRM-MDM integration, you can refer these link also:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0102a91-bae4-2910-f298-acbae13e80d4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6075d293-291b-2a10-7fbb-b827b28fd9b0
Hope this will help you.
TNR,
Saurabh...
Reward if found helpful.

SAP licensing Policy for SRM

Hi Mats,
I need one clarification regarding SAP licensing Policy for SRM.
Scenario:
Supplier login into our SAP SRM system through Internet. I want to know, are we need individual license for each supplier or its including with "User Licensee Packet" for all the Suppler?
Please confirm us.
Thanks
Syed Shaukat

You have posted your message to the wrong forum. This forum is for SRM eSourcing.

SAP SSO between Microsoft AD and SAP R/3 GUI&WebGui

Hello Everybody,
We are looking in to implementing SSO between Mircosoft AD and our SAP CRM ABAP 7.0.
We have users both logging in through SAP Gui and also the web gui.
Found there a multiple options for achieving SSO:
1) SNC
2) X.509 cerfificate
3) Kerberos
I would like to go with X.509 certificate , and have already implemented the SAPCRYPTOLIB 5.5.5. Now am trying to download the "SAP NW Single Sign on 2.0" for installing the Secure Login Library SSL. And when i looked at PAM the required product versions are only:
1. SAP EHP1 for SAP NW 7.3
2. SAP NW 7.3
3. SAP NW 7.4
4. SAP NW CE 7.2
So I went back and looked at PAM for SAP NW SINGLE SIGN ON 1.0 required product versions and I only see the below:
1. SAP EHP1 FOR SAP NETWEAVER 7.3
2. SAP NETWEAVER 7.3
3. SAP NETWEAVER CE 7.2
Our version of SAP is CRM ABAP 7.0, so I am not sure how/which version of Single Sign on I have to use.
Can someone please advise.
Thanks!

Thank you Donka for the information!
Looks like NW SSO 2.0 is supported for AIX 7.1 SAP ABAP CRM 7.0.
But we also have users logging in to ABAP CRM 7.0 via HTTP Web dispatcher.
And the PAM does not mention if NWSSO 2.0 is supported for X.509 method for web gui users logging in via HTTP.
Also if we decide to go with SSO 2.0 and I manually Install the COMMONCRYPTOLIB 8 instead of the SAPCRYPTOLIB 5.5.5, I should be able to use the Secure Login Library files that come with the SSO 2.0 right?
Here's our current Kernel version:
kernel make variant 720_REL, 64 BIT AIX, UNICODE , Patch number 500
Thanks!

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6

Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
Yogesh

Dear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen.

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Difference in SAP R/3 Financials and MY SAP ERP Financials

Hi ALL,
Can any one tell me the difference in SAP R/3 Financial and MY SAP ERP Financial
Thank and Regards
Kedar

My SAP ERP provides additional analytics such as financial analytics, workforce analytics and operations analytics. We get employee life cycle management and employee relationship management and there's a financial supply chain component.
The NetWeaver piece gives you portal capabilities and better integration capabilities for integrating applications with applications from other vendors.
Check out the solution overview in this link.
http://download.sap.com/download.epd?context=34A481C8164156DEF6E507D82889F9F5D8D8F5BC953285A76585EA32C01E3F8A402BF4874B54DC389CD1EB0DCC5C469451499E974252ABDD
Reg,
Arun

SAP HR or SAP SRM or SAP BI expert advice

Similar Messages

Maybe you are looking for