SAP HR Payroll Issue
HI Experts,
my client requirement X loans need to be configure in it0045, in the payslip each loan should appear seperately with repayment amt,total repayment amt, loan balance etc.... its a interest free loans. as i done loan configuration part in img and created each loan 4 wagetypes . how to configure these 4 wage types in loan rules.
your co-op highly appreciated, its urgent requirement for me. pls get me out from this issue..............................................
Points will be rewarded
Sunny
Hi
One way u need to write a PCR.
Inorder to get the loan amt and balance saperately, you have to maintain some dummy wage types for each loan amt and same balance.
All the loans amounts will be cummulated to /LOP WT in XlON rule, before it cummulates write a rule the amount to be sent in dummy WG created and same display it in payslip.
In the same way the balances will be cummulated in /LLP WT, do the Same process.......
Similar Messages
-
Hi
I am facing issue in SAP HR Payroll for UK employee.
One employee was hired on 7th July 2014. He was not paid salary in july, his retro was executed in august so he got july's salary in august.
But again he got salary in september also.
Please suggest how would i trace that why the employee has been paid twice.
thanks & Regards
Shikha BhattWhen you say his salary paid twice ? How are you saying that by checking /560 if July payroll log is executed in the month of september it doesnt mean he is being paid twice
if possible paste the RT results for the month of September -
Payroll issue regarding the Claims - /561 and /563
Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
/101 Total gross amount 118,897.00
/110 Net payments/deductions 76,070.00-
/550 Statutory net pay 95343
/551 Stat.net recalc.diff. 37,692.00-
/552 Stat.net subs.adjustment 37,692.00-
/559 Bank transfer 34,317.00
/560 Net pay 37,218.00
/563 Claim from previous month 5,609.00
FOR Period
Sept- Oct
/101 Total gross amount 49,213.00
/110 Net payments/deductions 31,721.00-
/550 Statutory net pay 41,529.00
/551 Stat.net recalc.diff. 14,591.00
/552 Stat.net subs.adjustment 23,101.00-
/553 Recalc.diff.to last payr. 37,692.00
/559 Bank transfer 14,591.00
/560 Net pay 14,591.00
/561 Claim 5,609.00
I request some body to throw siome light on the same.Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks -
Hi ,
I am learning SAP HR / Payroll.
Can you please advise any good book relating to this ?
Thanks,
Sandip.Hi,
Check these links.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm -
SAP HR Payroll needed starting ASAP based in KSA for 18 months, candidate need to have skills in GCC PY, Time Management, Travel Management, and compensation Management. Please if interested kindly send your resume ASAP to:
[email protected]
Please note down your Availability, and Expected salary.
Thank youHi Ram,
Apart from custom defined tables,pcr's and schmas, what are the other objects or tables need to be upgraded.(absences, pensions, GB tax, National insurance).
Please can you give me a breif decsription.
Many Thanks
Swetha -
Hi i want information SAP HR PAYROLL MODULE
hi i want information SAP HR PAYROLL MODULE
It can not be explained in a single query if you can specify what exactly you are looking for accordingly we can suggest.
Regards
Venkatesh -
SAP HR PAYROLL DIFFRENCES BETWEEN 4.6C AND ECC 6.0
Hi,
I want to know the diffrences in functionality between 4.6c and ecc 6.0 for sap hr payroll singapore.
Regards
subbasee these:
check these links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade for functional
https://websmp105.sap-ag.de/upgrade -
SAP EHS Safety Issue mobile app on SMP 3.0
Hi,
I'm on the process of installing and configuring the SAP EHS Safety Issue mobile app on SMP 3.0. However, the current Administrator guide hasn't been updated since SMP 2.3.
Has anyone attempted to install this app on SMP 3.0? Any idea how this should be configured? Should it use the SAP Management Console or the Gateway Management Cockpit?
Also, does anyone has previous experience working with this app? How can I test the OData services without going through SMP?
Kind regards,
OmarFor anyone interested, here's some details:
The HTTP method implemented by the service is: http://<SAPserver>:8000/sap/opu/odata/EHSMM01/LWM_SAFETY_OBSERVAT
When you configure the app, you need to set this up as your backend endpoint. You can also set this up as your HTTP authentication for your security profile.
You don't need to use the Gateway Management Cockpit. Just create an application with app ID:
com.sap.bsuite.erp.ehsm.safetyobserver
and use the above information for the backend and security profiles.
That's all! -
Polish payroll issue: FP/FGSP
Hi Anyone,
I'm in the process of applying three OSS notes for Poland payroll.
The OSS note of my concern is #1323028. This note required three
prerequisites; 1297363, 1316576, and 1317569. I have susscessfully
applied note 1316576. Note 1317569 rejected because it was expecting
the prerequisite note 1297363.
In January of this year, I applied OSS note 1298110. Note 1298110
specifically states "In case you have not yet applied the note 1297363,
it is enough to import the above mentioned transport because it
contains the full and corrected ABAP coding of the legal change
described in note 1297363." Note 1297363 also issues a caution and
refers to note 1298110.
Now, as a result of only applying 1298110, the subsequent notes 1316576
and 1323028 are not accepted due to the prerequisite discrepancy.Hi,
The way you described the issue, seems that you have correctly applied OSS notes. Though, the OSS note 1298110 mention about full and corrected ABAP code which you applied and still facing an issue.
1. Can you check, if the latest version for the same oss note 1298110 is released by SAP (SAP does that very often, if they have missed somthing in previous version of same oss note.)
2. If point number 1 is satisfied, then it is advised that to write to SAP and explain the issue. It can be issue form SAP side.
Thank you,
Abhay -
SAP Gui 730 issue with crobu theme
Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part. Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish
Hi Munish,
Can you raise this in ABAP community ?
Also, to help you further can you drill down to some more relevant information ?
As far as one can understand, it's a rendering problem with SAP GUI 730.
This can also be compatibility issue with your kernel and application.
I would suggested you to check all above options.
Regards,
Divyanshu -
SAP GUI Compatibility issue with Windows 2008R2 64 Bit
Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giriHi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS -
Hi , all
Now , i am using SAP GUI710 , Patch level 3, i have an issue , if i leave the sec untouched for about 5 minutes , GUI will log off itself , and give me this information:
CD1: connection to partner " ..........: sapdp00" broken
WSAECONNRESET: connection reset by peer
though i can logon again , but this really boring me , every 5 minute , if no activity , then auto logoff and i need to logon again.
what is the problem , how to fix this ? thanks.Hello,
If this happens for all the users , pl check the SAP instance parameter value rdisp/gui_auto_logout.
If it is 0 there wont be any auto log out.
set the value in seconds means if you set it at 300 it will log out automaticaly after 5 secs.
Pl try this . Dont forget to restart the server after making the changes.
Award if resolved.
Regards -
Hello Experts,
I am having some issue in the SAP GUI editor.
Whenver I open the SCREEN painter. It opens in line editor with error "EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'"
My graphic layout editor option is checked.
The Component version is SAP EHP 1 for SAP Solution Manager 7.0
GUI version is 640
My other box whose component version ECC 6.0. There editor is opening in the Graphical format.
kindly help.
Regards,
HemaHello,
This is version compatibility issue. You can talk to BASIS administrator and get the lastest SAP GUI installed.
Thanks,
Augustin. -
SAP ERP Quality Issue: Notification Creation Problem
Hello,
I'm testing the SAP mobile app ERP Quality Issue.
I've done the needed customizing in backend.
If I try to create a notification from the mobile app I've got this message:
Your Quality Issue cannot be created!
In iPad log I can see this error:
QualityIssue
31/05/12 10:43:45
Exception during parsing! - Collection Value is not a valid DateTime /Volumes/sapmnt/dewdfms0003/fa/src/MobileSuite/LWM_qualityissue_iOS/onDevice/LWM_qualityissue_iOS/1.0_REL/Mobile Quality Issue/Classes/../Connectivity.m:510
I don't understand why the app talks about DateTime if there are no datetime fields in the screen!
Does anyone have the same problem?
Thanks
PieroHello, Piero!
Have you solved this problem?
We have the same problem right now
and we are trying to find solution.
Could you please share your experience, have you succeed?
Thank you!
Best regards,
Konstantin Tomilov -
Ireland Payroll - Issue in Tax Refund for Leavers
Hello Payroll Experts,
Greetings!
We are having problems for 2 of our Ireland Based Employees.
The Below is the step wise details of the issue:
=> Employee has left the Organisation in the month of 21st October'08.
=> The Seperation Action for the employee only has been made only after
the completion of October Month's Payroll, hence the employee has been
paid until 31st October '08.
=> While running the November Month Payroll, this employee has been
picked by the payroll again & the system is calculating the Retro and
have given the wrongly calculated days back (21st Oct - 31st Oct'08).
=> Even the Pension refund has been given.
=> But the TAX is not getting RECALCULATED (Tax Refund).
Could you please help us to find out why this issue is happening.
Thank you in Advance
Best Regards
VijayHi,
I am facing a problem in professional tax. some employees transferred from non-tax area to tax area, for them the tax is not deducting. where to check?
Please help me.
Chandra
Hi Chandra,
Please check the following tables:
V_7IN0P_PTX
v_t7inp1
v_t7inp3
v_t7inp4
Important : Also check whether when the employee is moving from non ptax region to ptax region then the prorated amount of the ptax region is soming under ptax limit or the amount is under nil limit.
Along with the above also check, IT0588 subtype 0003 for PTax.
Regards,
ARNAV...
Edited by: ARNAV... on Mar 6, 2010 8:11 AM
Maybe you are looking for
-
Can Time Machine back up a failed hard drive, and how long will it take to prepare?
1. The hard drive in my 2009 MBP has failed. My Time Machine external drive failed about three weeks ago, and I don't know if I'll be able to restore from it. Is it ever possible to backup a failed hard drive with Time Machine? The machine boots, it
-
Problem in JNDI Lookup of Deployable Proxy from the logon par file
Hi, I have customized the Logon par file and have a functionality to call a webservice when the Password Reset happens. <b>from the ResetPassword.jsp , SAPMLogonLogic.java is getting called ,and there is a method called performResetPassword().</b> I
-
Is this a bug? ⌘+SHIFT+A
I often use Finder's ⌘SHIFTA to access my Applications Folder. It seems recently that it's overriding the currently open Finder window. That's to say, I believe ⌘SHIFTA used to open a new finder window with the Applications Folder but now if there's
-
Can't remove old icloud account
cant remove old icloud account
-
After installing snow leopard I could not use my old addresbook and Ical anymore. I did make a backup of the old programs. How do I import those old data into my new programs? Thanks in advance.