SAP_HR Support Pack Problem

Hello,
I am trying to apply the year-end support packs for SAP_HR (SAPKE50023 - SAPKE50026).  I get so far with SPAM, but then I get the following error: Error in phase: IMPORT_PROPER, Reason for error: TP_STEP_FAILURE.  I applied the latest TP version just in case that was the problem, but it did not solve it.  Any ideas?
Thank you for your time,
Erin Byrne

Hi Ruchit,
In SPAM, it says the following:
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package ALL, tp step "N", return code 0012
I looked at the system log, but there was not anything new there.  In /usr/sap/trans/log, I looked at my N log, & it basically said CONVERSION OF DD OBJECTS (TBATG) ended in return code 0012.  It was not very helpful.  I applied TP version 145 (the latest one I found), but that did not help the issue.  When I look in STMS, there are no errors in the setup either.  Any help you can offer would be much appreciated.
Thank you,
Erin

Similar Messages

  • SAP_HR Support Pack.

    Hi Team:
    Currently  our  SAP_HR  support pack is SAPKE60017 we are  a part of payroll international.
    We would seriously planning for the  enhancement of the support pack to the  latest level:
    We need  information for the below query  to process further  on this, anybody  faced similar kind of problem can  extend  their co operation:
    1.What would be the Exact impact on other sub modules especially
    FICO once HR support pack is enhanced to the latest u2013 ECC
    6.0/ECC 6.X including enhancement packs.
    2.With the enhancement of latest  support pack, what are the
    additional features can be availed in other sub modules of HR domain
    along with core Payroll.
    3. Can the latest support pack be directly implemented or need to be
    implemented in a sequence to reach the latest pack.
    After SAP big release i. e ECC 6.0, now SAP is releasing
    Enhancement packs (Eg :Like ECC 6.2 ).
    Now I would like to seek a clarifications that if we would like to
    implement latest enhancement pack to fully utilize the
    new functionalities/features , do we need to implement first latest support pack
    till ECC 6.0 release  followed by  latest enhancement  pack
    (ECC 6.2)  implementation..
    Let me know what are the latest support pack pertaining to ECC 6.0 /
    ECC 6.2.need to be implemented in order to have latest SP/EP in the system.
    Looking forward  for a positive reply.
    Regards
    Team Member
    Edited by: Patlolla Mallikarjun on Aug 11, 2009 11:01 AM

    No comments

  • HR support packs not available in Service Market Place

    Dear SAP,
    We are planning to upload SAP_HR Support Pack till the level SAPKE50076
    We are currently in level SAPKE50063. We need to go till the level 76
    as we req to implement snote 1474958 and all its prerequisites the note
    number 1474958 is mentioned as in support pack SAPKE50075. 
    But while we try to download it from Service Market place and search
    for the support packs of HR for SAPKE500* we are able to get the last
    search as SAPKE50071. We need to get 72,73,74,75,76 as well.
    Please suggest what needs to be done as we need to critically implement
    the HR Support packs for some HR Process.
    - Jitesh
    ( SAP Basis )

    Hi Jitesh,
    When I checked in the market place I could see patches upto 81 for SAP HR 5.0 and they are very much available. Once you search the patches goto page 7
    Let me know if you need any help.
    Regards,
    SBK

  • IXOS workflow template 4.7 support pack stack 24 problem

    We are upgrading to the above support pack.  Using a customized workflow template created by IXOS we have uncovered a problem.  When an entry is put into the sap inbox we have option of REJECT EXECUTION after which a menu is displayed with other actions.
    The REJECT EXECUTION no longer works.  In debugging the workflow we get to  RH_TASK_ATTRIBUTES_RUNTIME but not to RH_GET_TASK_START_EVENTS.
    Any ideas?
    Thanks
    Jean Wright

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Problem after applying support pack 15

    Hi ,
    I applied Support Pack 15 for SOLMAN 4.00. Every thing went fine , but after that i entered into maintenance optimizer and tried to download a package, then its giving error saying "No Customer numbers in transaction AISUSER". When i click that it gave a popup saying as below:
    Message Number: SOLMAN_SAP_BACKEND016
    Diagnosis
    There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
    System Response
    You cannot get customer number-specific RFC destinations.
    Procedure
    Maintain these entries manually or start the report
    SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.Please guide me
    Thnaks

    Yes i did the same and when i went to maintenance optimizer it says:
    Message Number: SOLMAN_SAP_BACKEND016
    Diagnosis
    There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
    System Response
    You cannot get customer number-specific RFC destinations.
    Procedure
    Maintain these entries manually or start the report
    SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
    Actually for this message i got a note 1140822 in the forums and when im following this note i got the error mentioned earlier (below):
    The RFC-user does not belong to a VAR- or CCC-customer number
    Message no. AI_SC_EN111
    Diagnosis
    The user used in RFC destination SAP-OSS does belong to a simple customer number that is not assigned to a Value Added Reseller or Customer Competence Center in SAP Support Portal.
    Procedure
    You need to maintain your customer numbers manually in table V_AISAPCUSTNOS or choose another user.
    Reply
    I couldnt get much information for this error though i gave 6 digit in theV_AISAPCUSTNOS and 10 digit in the AISUSER.
    Forward

  • SAP Upgrade Assitant Support Package Problem 4.7 to ECC 6

    Hi all,
    Doing an upgrade from 4.7E to ECC 6. Does anyone know what should be the minimum patch level to start upgrade. Basis and Abap Supp. pack is on level 60. HR is on 61. But after starting prepare, it is giving error in version check phase. It is saying Upgrade Assitant the start release configuration is not supported. SAP_ABA : 620
    SAP_APPL : 470
    SAP_BASIS : 620
    SAP_HR : 470
    Infact all the support packages are at this level however the kernel is upgraded to 640 patch level 43.
    If anyone has the info please help.. If ignored the upgrade assistant ask VALCHK_INI password which searched is nowhere found.
    Kindly help.
    Regards,
    Valvan

    Hello,
    Thanks Eric I had already checked and they are above what is the minimum support pack level for eg SAP_BASIS requires minimum 41 support pack level and i have installed 61. Everything is according or more than the prerequisite requirement. Is this is a database version problem. Shall i go to upgrade oracle first as of now i am on 9.2.0.6.
    Regards,
    Shekhar Kulkarni

  • SB Audigy Series Support Pack 5.3 (02/24/2015)

    This software/driver pack is unofficial, not supported by Creative Labs.
    Use it at your own risk.
    Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    - Audigy 5/RX
    For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
    Operating systems supported:
    32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
    Included in the pack:
    - Audigy series driver 3.01.0039 (Windows Vista or later) (**)
    - Audigy series driver 2.09.0016 (Windows XP)
    - ALchemy 1.45.03
    - Audio Console 1.41.00
    - DDL and DTS Connect License Activation 1.00.04 (*)
    - Dolby Digital Live Pack 3.03.08 (*)
    - EAX Console 3.00.60 (Windows Vista or later)
    - EAX Console 3.00.59 (Windows XP only)
    - Feature Mode Selection Utility 2.10.07
    - Graphic Equalizer 2.10.01
    - MediaSource DVD-Audio Player 2.00.78 (***)
    - SoundFont Bank Manager 3.21.02
    - Speaker Calibrator 1.60.14 (Windows XP only)
    - Speaker Settings 2.10.05 (Windows Vista or later)
    - Speaker Settings 2.10.04 (Windows XP only)
    - Surround Mixer 4.00.76 (Windows XP only)
    - THX Setup Console 2.20.08 (Windows XP only)
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    (**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
    (***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
    Does this driver improve sound quality or performance Are there any tweaks ?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    Fixes and improvements:
    - Fixed Audigy 5/RX support.
    - Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
    - Fixed driver installation issues on Windows 10.
    - Fixed Audigy "1" or Audigy 2 mute issue.
    - Audigy RX is now fully supported.
    - EAX Console now works on Windows Vista or later.
    - Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
    - Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
    - Added instructions on how to install the Gameport.
    - Fixed missing speaker settings strings on Windows XP when DDL is enabled.
    - Improved driver installation, less confirmation prompts.
    - Improved setup procedure and scripts.
    - Removed Encode switcher for now, only DDL is available.
    - Installation now customizable, select what you want to install.
    - New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
    - CMSS2 is now available.
    - OpenAL 64-bit support.
    - Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
    - Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
    - Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
    - Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
    - EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
    - Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
    Undocumented fixes by Creative (not listed in the release notes):
    - Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
    - Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
    Release Notes:
    IMPORTANT: Driver uninstall on Windows Vista or later
    The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
    To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
    If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
    As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
    HOW TO INSTALL THE GAMEPORT DRIVER
    You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
    Just follow the steps shown in the screenshots.
    WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
    - Configure all settings and shutdown. Your settings will be saved.
    - This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
    - On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
    No problem With 62 or fewer buffers.
    OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
    There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
    The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
    Workarounds:
    - install the 32-bit (x86) version of Windows XP.
    - limit to less than 4GB the amount of RAM available to Windows.
    - enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
    - install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
    Karaoke effects make the audio play in mono
    You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
    Optionally, follow the steps below.
    Open EAX Settings, select a Karaoke effect, then click the Edit button.
    Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
    Repeat the steps for all Karaoke effects.
    These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows XP or later
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows Vista or later
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Equalizer and EAX effects are not available when using OpenAL or ALchemy
    Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
    There is no sound in games with OpenAL support
    Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
    Equalizer settings are not applied after using OpenAL or ALchemy
    After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are lost when speaker configuration is changed
    Bass and treble settings reset to their default values when speaker configuration is changed.
    Download:
    Filename: Audigy_SupportPack_5_3.exe
    File size: 120 MB
    CRC32 hash: 76110093
    SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
    Mirrors: Google Drive
    All files are property of Creative Technology Ltd, unless otherwise noted.

    Originally Posted by Dave_
    Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
    Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
    Anyway, I have a suggestion.
    Run EndPtUtl.exe found in the Audio Console installation folder.
    If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
    EndPtUtl.exe enables the use of any device for outputting encoded audio.

  • Issues with POWL action buttons and row selection after Support Packs

    We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt).  In fact all of the POWL lists that we are using are behaving the same way.  There are 2 changes that have happened after moving to this stack.
    1.  In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
    2.  All of the Action Buttons in the POWL lists are disabled.
    I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
    I've checked a side-effects report from OSS and have come up empty handed.  Has anyone else run into this?
    Eric

    I have found an OSS note that addresses this problem.  This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0.  The OSS note is 1363334.  Question Answered.

  • Open data extraction orders -  Applying Support Packs

    Dear All,
    I have done the IDES 4.6C SR2 installation.
    While updating the support packs, i get the message saying
    CHECK_REQUIREMENTS phase.
    Open data extraction orders
    There are still open data extraction orders in the system
    process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
    For more details about this problem, see Note 328181.
    Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
    I have checked the Note.
    But this is something m facing for the first time.
    Any suggestion!!!
    Rgds,
    NK

    The exact message is :
    Phase CHECK_REQUIREMENTS: Explanation of the Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.

  • SB Audigy Series Support Pack 3.1 (OUTDATED)

    <p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
    <p align="center">[color="#ff0000"]Use it at your own risk.
    Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
    Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
    ?Vista?SP2 / XP SP3
    Included in the pack:?
    - Audigy series driver 2.8.00.8 (latest beta)
    - ALchemy .30.00
    - Audio Console .32.02
    - DDL and DTS Connect License Activation 2.00.03 (*)
    - Dolby Digital Li've Pack 3.00.03 (*)
    - DTS Connect Pack .03.04 (*)
    - EAX Console 3.00.56 (Windows XP only)
    - Graphic Equalizer 2.00.65
    - MediaSource DVD-Audio Player 2.00.78
    - SoundFont Bank Manager 3.2.00
    - Speaker Settings 2.00.60
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    Does this driver improve sound quality or performance? Are there any tweaks?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    [img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
    Fixes and improvements:
    - Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
    - Fixes the enhancements errors in Windows?mixer and Windows Media Player.
    - Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
    - Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
    - Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
    - Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
    - Workarounds a bug that?unexpectedly resets the?speaker configuration.
    - Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
    - Implements Hardware CMSS Headphone by using a workaround.
    - Updates all InstallShield setup scripts to support Windows 7.
    - Fixes installation INI to properly install applications depending on the detected OS.
    - Removes COM workaround for Equalizer, fixed by Creative.
    - Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
    - Updates shared modules, responsi'veness on certain applications is improved.
    - Enables CMSS2 and Stereo Surround.
    - Fixes 32-bit ASIO not working on Windows 7 x64.
    - Fixes Encoder not available on Windows 7 x64 (related to fix above).
    - Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
    - Properly adds support for 64-bit OpenAL and 64-bit ASIO.
    - Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
    Undocumented fixes by Creative (not listed in the release notes):
    - Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
    - Fixes Equalizer Out of Memory error.
    - Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
    - Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
    - Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
    - Restores missing Microphone option in Surround Mixer (documented).
    - Fixes Microphone mute, volume and +20db boost controls.
    [size="3" color="#000000">?
    [size="3" color="#000000">Release Notes:
    Windows Security warning during driver installation
    When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
    Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
    Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
    Workarounds:
    - install the 32-bit (x86) version of Windows
    - limit the RAM available to Windows to less than 4GB
    - enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
    6. Speakers?incorrectly available on Windows 7 64-bit (x64)
    Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
    Do not choose that mode as it causes sync issues with Windows mixer.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows 7 / Vista / XP
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows 7 / Vista (requires Service Pack )
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Advanced EQ and Special FX not available on Windows 7 / Vista
    These presets don't work on Windows 7 / Vista.
    There is no sound in games with OpenAL support on Windows XP
    Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
    Equalizer settings are lost
    When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are reset when speaker configuration is changed
    Bass and treble settings are reset when speaker configuration is changed.
    DTS Encoder Switcher
    The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
    Thoroughly read the ReadMe.txt file included before using the provided?utilities.
    Hardware CMSS Headphone
    To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
    Playback Devices -> Speaker Properties
    Now check the Speaker configuration in "Playback devices".
    If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
    This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
    Microsoft Audio Home Theater Effects
    This driver adds the following audio effects, which are available depending on the current speaker configuration:
    - Bass Management
    - Speaker Fill
    - Room Correction
    - Loudness Equalization
    - Bass Boost
    - Virtual Surround
    - Low Frequency Protection
    Some effects are also available for the "SPDIF Out" device.
    Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
    Windows MIDI Device Configuration Utility
    Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
    Download:
    New version available here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
    All files are property of Creative Technology Ltd, unless otherwise noted.

    IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
    blunden wrote:
    EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
    daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
    http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
    http://www.mediafire.com/download.php?rjmznqa2oy
    Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
    Fixes an issue that prevents Speaker Fill from working.
    There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

  • Error during application of scm 7.0 support pack

    While applying support pack to our SCM 7.0 system (New Installation),
    We encountered a SPAM error in xpra_execution phase, due to automatic
    termination of job RDDEXECL scheduled by user id DDIC on client 000.
    The details of the error are:
    Message id: Brain
    Message number : 366
    Message type: A
    Error: Error during SID assignment for characteristic 0REQUID (current
    value 2)
    We had a look at few notes mentioned by SAP support on 1319241. which
    specifies a solution as
    u201CIf you encounter the error message above, please run the Elementary
    test - Compare Number Range and Maximum SID - for Master Data 0REQUID
    in transaction RSRV. When it turns red, the error can be corrected by
    pressing the "Correct Error" button.u201D
    But we are already getting the light as green in the elementary test
    for the Master Data 0REQUID in transaction RSRV, though we still
    execute the same and problem is still the same i.e. RDDEXECL
    program/job is getting terminated.
    Regards
    Edited by: pranav kumar on Feb 25, 2011 8:20 AM

    Hi SM
    Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
    Regards
    Pranav

  • SAP R/3  4.6 B Support pack level for AIX 5.2

    Hi,
    We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
    My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
    SAP_BASIS      46B           0054    SAPKB46B54
    SAP_ABA         46B           0054    SAPKA46B54
    SAP_APPL       46B           0054    SAPKH46B54
    SAP_HR           46B           0000        -
    ST-PI            2005_1_46B    0003    SAPKITLQC3
    Please request the feedback.
    Thanks & Regards,
    Narayana Murthy.

    Do we apply any support pack to the system after O.S upgrade ?
    ( Correction for the below posted mail)

  • Support pack level issue in Standard Finance Program.

    Hi Everyone,
                    i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
                   For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL  support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist.  Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
                  My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
    Thanks&Regards,
    Siva

    Hi Siva,
    Your query is obsolutely acceptable...
    After supportpack update some times database will not be synchronised with the new updates.
    and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
    Regards,
    Srini

  • ABAP + Java Support Pack installation

    When updating support packs in an ABAP+Java environment (ECC 6.0), is there any reason why one could not do the Java Support Packs first, followed by the ABAP support packs?  We are trying to update our support packs as efficiently as possible, and would like to update our java support packs first, followed by the ABAP stack a few days later.
    In regards,
    Michael

    Hi!
    There can probably not be a general answer to that question. There are some functionality where ABAP and JAVA are closely linked and where you'll most likely run into problems if the levels do not match.
    Technically there is no problem as applying the SP-Stack for Java and applying SPs for ABAP are independent (technical) tasks, but you will have to VERY carefully check the dependencies and carefully test this in a QA-environment.
    If you want my advice: Try to find a 'big shot' solution where you do all in one move.
    Regards,
    Jörg

  • Error occured while tranferring file in support pack

    I am Applying support pack in my QAS Server. When I have apply Support Pack of ABAP from SAPKA70009 to SAPKA70012 . It proper work. But when I am applying SAPKA70013
    via Frontend it give messege.
    An error occured while tranferring file
    'E;\sapdownload\SupportPack\KA70013.CAR'from the
    frontend computer.
    In my PC from where i am applying Patch . All drive space is ok and In my QAS server all file system is OK.
    Where is the problem.
    Thanks
    manu

    quality:qasadm 4> SAPCAR -xvf KA70013.CAR
    processing archive KA70013.CAR...
    x EPS/in/CSN0120061532_0027618.ATT
    x EPS/in/CSN0120061532_0027618.PAT
    what is the location of this extracted file? just move the extracted file into /usr/sap/trans/EPS/in then
    Now When I login in QAS server in Client 000 via DDIC.
    When I run SPAM and Load package from Application Server
    It ask SPAM Confirm Load
    path of EPS inbox :/usr/sap/trans/EPS/in
    Do you want to Upload OCS package from EPS inbox
    I press Yes
    Regards
    Subhash

Maybe you are looking for