SAP_HR Support Pack.

Hi Team:
Currently  our  SAP_HR  support pack is SAPKE60017 we are  a part of payroll international.
We would seriously planning for the  enhancement of the support pack to the  latest level:
We need  information for the below query  to process further  on this, anybody  faced similar kind of problem can  extend  their co operation:
1.What would be the Exact impact on other sub modules especially
FICO once HR support pack is enhanced to the latest u2013 ECC
6.0/ECC 6.X including enhancement packs.
2.With the enhancement of latest  support pack, what are the
additional features can be availed in other sub modules of HR domain
along with core Payroll.
3. Can the latest support pack be directly implemented or need to be
implemented in a sequence to reach the latest pack.
After SAP big release i. e ECC 6.0, now SAP is releasing
Enhancement packs (Eg :Like ECC 6.2 ).
Now I would like to seek a clarifications that if we would like to
implement latest enhancement pack to fully utilize the
new functionalities/features , do we need to implement first latest support pack
till ECC 6.0 release  followed by  latest enhancement  pack
(ECC 6.2)  implementation..
Let me know what are the latest support pack pertaining to ECC 6.0 /
ECC 6.2.need to be implemented in order to have latest SP/EP in the system.
Looking forward  for a positive reply.
Regards
Team Member
Edited by: Patlolla Mallikarjun on Aug 11, 2009 11:01 AM

No comments

Similar Messages

  • SAP_HR Support Pack Problem

    Hello,
    I am trying to apply the year-end support packs for SAP_HR (SAPKE50023 - SAPKE50026).  I get so far with SPAM, but then I get the following error: Error in phase: IMPORT_PROPER, Reason for error: TP_STEP_FAILURE.  I applied the latest TP version just in case that was the problem, but it did not solve it.  Any ideas?
    Thank you for your time,
    Erin Byrne

    Hi Ruchit,
    In SPAM, it says the following:
    Error in phase: IMPORT_PROPER
    Reason for error: TP_STEP_FAILURE
    Return code: 0012
    Error message: OCS Package ALL, tp step "N", return code 0012
    I looked at the system log, but there was not anything new there.  In /usr/sap/trans/log, I looked at my N log, & it basically said CONVERSION OF DD OBJECTS (TBATG) ended in return code 0012.  It was not very helpful.  I applied TP version 145 (the latest one I found), but that did not help the issue.  When I look in STMS, there are no errors in the setup either.  Any help you can offer would be much appreciated.
    Thank you,
    Erin

  • HR support packs not available in Service Market Place

    Dear SAP,
    We are planning to upload SAP_HR Support Pack till the level SAPKE50076
    We are currently in level SAPKE50063. We need to go till the level 76
    as we req to implement snote 1474958 and all its prerequisites the note
    number 1474958 is mentioned as in support pack SAPKE50075. 
    But while we try to download it from Service Market place and search
    for the support packs of HR for SAPKE500* we are able to get the last
    search as SAPKE50071. We need to get 72,73,74,75,76 as well.
    Please suggest what needs to be done as we need to critically implement
    the HR Support packs for some HR Process.
    - Jitesh
    ( SAP Basis )

    Hi Jitesh,
    When I checked in the market place I could see patches upto 81 for SAP HR 5.0 and they are very much available. Once you search the patches goto page 7
    Let me know if you need any help.
    Regards,
    SBK

  • SAP R/3  4.6 B Support pack level for AIX 5.2

    Hi,
    We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
    My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
    SAP_BASIS      46B           0054    SAPKB46B54
    SAP_ABA         46B           0054    SAPKA46B54
    SAP_APPL       46B           0054    SAPKH46B54
    SAP_HR           46B           0000        -
    ST-PI            2005_1_46B    0003    SAPKITLQC3
    Please request the feedback.
    Thanks & Regards,
    Narayana Murthy.

    Do we apply any support pack to the system after O.S upgrade ?
    ( Correction for the below posted mail)

  • Suggested Support Pack Level for ECC 6.0 Upgrade - Target

    Hi ,
    Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
    Our current patch level is:
    SAP_ABA     700     0012     SAPKA70012
    SAP_BASIS     700     0012     SAPKB70012
    PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
    ST-PI     2005_1_700     0003     SAPKITLQI3
    SAP_BW     700     0014     SAPKW70014
    SAP_AP     700     0009     SAPKNA7009
    SAP_APPL     600     0010     SAPKH60010
    SAP_HR     600     0013     SAPKE60013
    EA-IPPE     400     0008     SAPKGPID08
    EA-APPL     600     0008     SAPKGPAD08
    EA-DFPS     600     0008     SAPKGPDD08
    EA-FINSERV     600     0008     SAPKGPFD08
    EA-GLTRADE     600     0008     SAPKGPGD08
    EA-HR     600     0013     SAPKGPHD13
    EA-PS     600     0008     SAPKGPPD08
    EA-RETAIL     600     0008     SAPKGPRD08
    FINBASIS     600     0008     SAPK-60008INFINBASIS
    ECC-DIMP     600     0008     SAPK-60008INECCDIMP
    ERECRUIT     600     0008     SAPK-60008INERECRUIT
    FI-CA     600     0008     SAPK-60008INFICA
    FI-CAX     600     0008     SAPK-60008INFICAX
    INSURANCE     600     0008     SAPK-60008ININSURANC
    IS-CWM     600     0008     SAPK-60008INISCWM
    IS-H     600     0008     SAPK-60008INISH
    IS-M     600     0008     SAPK-60008INISM
    SEM-BW     600     0008     SAPKGS6008
    IS-OIL     600     0008     SAPK-60008INISOIL
    IS-PS-CA     600     0008     SAPK-60008INISPSCA
    IS-UT     600     0008     SAPK-60008INISUT
    LSOFE     600     0008     SAPK-60008INLSOFE
    IRMIPM     30B     0005     SAPK-30BI7INIRM
    IRMGLB     30B     0005     SAPK-30BG7INIRM
    ST-A/PI     01K_ECC600     0000     -
    GSCDMC     600     0001     SAPK-60001INGSCDMC
    RCMGT     601     0001     SAPK-60101INRCMGT
    Thanks
    Senthil

    Hi Senthil,
    of course it is always recommended to use the newest Support Package Stack,
    but if your system (your business processes) are working fine, I would recommend you to
    import support package only then when you have an error or you want to have a special fiunctionality.
    Some customers play support packages into the system only twice a year, because the business processes
    should be tested after the sp import.
    Kind regards
    Imre Takácsi-Nagy
    Senior Support Consultant II.
    SAP Global Support Center Austria
    Netweaver WEB Application Server ABAP / JAVA

  • How to apply support pack

    Hi,
    We are going to apply support pack.Currently we are on support pack SAP_HR & EA_HR 27.Can you please guide how we can check dependency while applying support pack 28 & 29.
    Can any one please suggest the method of applying support pack.
    Regards
    Santosh

    To Apply Support packs first up all you need to download the patches. When you have the downloaded the file i.e.. (*.car ) patch file then you can extract and apply it in two ways.
    1. Go to command prompt through cmd (if you are using windows) and go to the folder where you have download these files ( could be in <drive>\downloaded folder\ ) type this command on command prompt without quotes "sapcar -xvf <filename>.sar". Now it will create a folder called EPS and a folder called IN inside EPS. Go to this folder and it will show two extracted files with extension " .att " and " .pat ".  Copy this two files into yours trans\eps\in folder which could be something like <drive>\usr\sap\trans\eps\in folder.Then type spam on your session and navigate to Support Package\Load Package\From Application Server and it will ask for Path confirm it Say " YES"Select the patch imported and double click on it and then click on small truck Icon and it start Import.
    2. Type Spam on session then navigate to  Support Package\Load Package\From FrontEnd \ and Navigate to path where you have downloaded the *.SAR file of Support Pack.Now it will open a popup window and then click on decompress button ( It is front-End process for extracting or decompressing .sar file in .pat and .att extension ) After that click on Display-Define button on right hand side.) Select the BASIS or ABAP patch ( whichever you are applying *) what ever you are after and import it in queue. After that click on Small truck Icon in menu i.e.. (import Queue) and it Starts importing.

  • Support Pack level for upgrade

    Hi All,
    We are upgrading from R/3 4.7 to ECC 6.0, can anybody provide me Support Pack level for SAP_ABA, SAP_BASIS etc. before starting upgrade.
    I have gone through lot of OSS notes but not getting exact SP level.
    Regards,
    Sachin

    I depends on
    - what upgrade package you use (SR1, SR2, SR3)
    - the SP level of the source system
    The upgrade guide tells you the minimum SP level needed to do the upgrade.
    If you use the new CD/DVD set, the system will be upgraded to SP 12 (BASIS, ABA, SAP_APPL).
    If you backup your wage tables before the upgrade (as described in the installation guide) you can also go to the highes SP level for SAP_HR.
    Markus

  • Support Pack error in SPAM

    Hi
    I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
    When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
    <b>
    Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
    The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
    I've checked on OSS and cannot find any notes on this error/support pack.
    Thanks.

    nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

  • Error in JSPM Support Pack update

    Hi,
    i am in the process of doing java support packs form level 9 to 14.
    I am doing 3 at a time
    After the sap-jee support pack got deployed the server0 for j2ee is not starting.
    Pls hlep
    The following is the log of disp_server0
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7296
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:40 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 4660] Tue Jun 17 16:30:40 2008
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 4660] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4660] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 6916] JLaunchRequestFunc: Thread 6916 started as listener thread for np messages.
    [Thr 4836] WaitSyncSemThread: Thread 4836 started as semaphore monitor thread.
    [Thr 4660] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 4660] CPIC (version=700.2006.09.13)
    [Thr 4660] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 4660] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 4660] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6772] JLaunchIStartFunc: Thread 6772 started as Java VM thread.
    [Thr 6772] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7296
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6772] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 4752] Tue Jun 17 16:30:41 2008
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 4752] JLaunchISetClusterId: set cluster id 13786450
    [Thr 4752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 4752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7688] Tue Jun 17 16:30:52 2008
    [Thr 7688] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7688] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7688] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 4560
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:55 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5300] Tue Jun 17 16:30:55 2008
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5300] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5300] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7140] JLaunchRequestFunc: Thread 7140 started as listener thread for np messages.
    [Thr 6892] WaitSyncSemThread: Thread 6892 started as semaphore monitor thread.
    [Thr 5300] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5300] CPIC (version=700.2006.09.13)
    [Thr 5300] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5300] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5300] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6352] JLaunchIStartFunc: Thread 6352 started as Java VM thread.
    [Thr 6352] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=4560
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6352] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 5836] Tue Jun 17 16:30:56 2008
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 5836] JLaunchISetClusterId: set cluster id 13786450
    [Thr 5836] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 5836] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6128] Tue Jun 17 16:31:06 2008
    [Thr 6128] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 6128] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 6128] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 8152
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:10 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 6468] Tue Jun 17 16:31:10 2008
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 6468] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 6468] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7576] JLaunchRequestFunc: Thread 7576 started as listener thread for np messages.
    [Thr 7312] WaitSyncSemThread: Thread 7312 started as semaphore monitor thread.
    [Thr 6468] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 6468] CPIC (version=700.2006.09.13)
    [Thr 6468] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 6468] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 6468] JLaunchISetDebugMode: set debug mode [no]
    [Thr 7456] JLaunchIStartFunc: Thread 7456 started as Java VM thread.
    [Thr 7456] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=8152
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 7456] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 7648] Tue Jun 17 16:31:11 2008
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 7648] JLaunchISetClusterId: set cluster id 13786450
    [Thr 7648] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 7648] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7432] Tue Jun 17 16:31:21 2008
    [Thr 7432] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7432] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7432] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7280
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:25 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5400] Tue Jun 17 16:31:25 2008
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5400] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5400] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4264] WaitSyncSemThread: Thread 4264 started as semaphore monitor thread.
    [Thr 4488] JLaunchRequestFunc: Thread 4488 started as listener thread for np messages.
    [Thr 5400] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5400] CPIC (version=700.2006.09.13)
    [Thr 5400] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5400] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5400] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4872] JLaunchIStartFunc: Thread 4872 started as Java VM thread.
    [Thr 4872] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7280

    We installed teh objects through SDM .
    this solved the issue

  • Support Pack upgrade error in Import Phase

    Hello,
    Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
    Could you please help me on this? I tried and still searching solution for this..But no luck...
    Os is : AIX and
    Log File:                /usr/sap/trans/log/SAPIB70013.xxx
    Main import
    Transport request   : SAPKB70013
    System              : xxxx
    tp path             : tp
    Version and release: 372.04.71 700
    child process 934006 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_OBJECT_COLLECTION==========CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1212554 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDR_APPLICATION_WINDOW=====CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1171520 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDY_MD_EVENT_SOURCE========CI
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1331412 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    insert / update sequence failed due to an error in DBI.
    maybe there's a concurrent process which inserted this table entry at the same time.
    insert / update sequence failed due to an error in DBI.                       
    maybe there's a concurrent process which inserted this table entry at the same time.
    child process 1310922 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_END
    tabname:    WDY_APP_PROPERTY
    len (char): 64
    key:        DEMO_UIEL_DROPDOWN_BY_IDX     DEMO_VIEW
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    import portion 018446 - 999999 not imported because the child processes died for unknown reason
    child process 1310924 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDY_MD_OUTGOING_EVENT======CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1286192 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    import portion 009158 - 018411 not imported because the child processes died for unknown reason
    import portion 018412 - 018527 not imported because the child processes died for unknown reason
    import portion 018528 - 999999 not imported because the child processes died for unknown reason
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    Main import
    End date and time : 20100909034914
    Ended with return code:  ===> 12 <===
         |   ######################################                     
    Thanks and Regards,
    Sankar
    SAP BASIS Consultant

    Hi,
    Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          10.09.2010 09:41:37
    Short text
         Function module "POSS_UIREQ_OPT_SUBMIT" not found.
    What happened?
         The function module "POSS_UIREQ_OPT_SUBMIT" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
          not caught in
         procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         The program "SAPLSTXC" contains the CALL FUNCTION statement.
         The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
         No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
         All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attenti
        upper/lower case and underscores ("_").
        or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
        the lock object may not have been activated
        (ABAP/4 Dictionary).
    When i tried to check function module it is not there..
    Could you please help on this?
    Regards,
    Sankar Basis Consultant

  • BSI Tax Factory Upgrade:HR Support packs

    Hi All,
    We are starting with upgrade of BSI tax Factory from 8.0 to 9.0. And as per SAP main note '1469858' for upgrade, the support
    pack required is 'HRSP61' but we currently have 'HRSP59'. Also, CLC 61 was applied for 2010 year end activities.
    So, with CLC 61 present, would it be possible to upgrade to 9.0 without upgrading to HRSP 61 ?
    In other words I want to confirm if CLC 61 includes the Tax Factory 9.0 updates.
    Thanks,
    Avinash

    Hi Avinash,
    I just updated relevant information for your query in the following thread:
    [*BSI 8.0 becomes obsolete August 31st 2011, 9.0 troubleshooting guide here*;
    Kind regards,
    Felipe

  • SB Audigy Series Support Pack 5.3 (02/24/2015)

    This software/driver pack is unofficial, not supported by Creative Labs.
    Use it at your own risk.
    Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    - Audigy 5/RX
    For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
    Operating systems supported:
    32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
    Included in the pack:
    - Audigy series driver 3.01.0039 (Windows Vista or later) (**)
    - Audigy series driver 2.09.0016 (Windows XP)
    - ALchemy 1.45.03
    - Audio Console 1.41.00
    - DDL and DTS Connect License Activation 1.00.04 (*)
    - Dolby Digital Live Pack 3.03.08 (*)
    - EAX Console 3.00.60 (Windows Vista or later)
    - EAX Console 3.00.59 (Windows XP only)
    - Feature Mode Selection Utility 2.10.07
    - Graphic Equalizer 2.10.01
    - MediaSource DVD-Audio Player 2.00.78 (***)
    - SoundFont Bank Manager 3.21.02
    - Speaker Calibrator 1.60.14 (Windows XP only)
    - Speaker Settings 2.10.05 (Windows Vista or later)
    - Speaker Settings 2.10.04 (Windows XP only)
    - Surround Mixer 4.00.76 (Windows XP only)
    - THX Setup Console 2.20.08 (Windows XP only)
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    (**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
    (***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
    Does this driver improve sound quality or performance Are there any tweaks ?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    Fixes and improvements:
    - Fixed Audigy 5/RX support.
    - Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
    - Fixed driver installation issues on Windows 10.
    - Fixed Audigy "1" or Audigy 2 mute issue.
    - Audigy RX is now fully supported.
    - EAX Console now works on Windows Vista or later.
    - Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
    - Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
    - Added instructions on how to install the Gameport.
    - Fixed missing speaker settings strings on Windows XP when DDL is enabled.
    - Improved driver installation, less confirmation prompts.
    - Improved setup procedure and scripts.
    - Removed Encode switcher for now, only DDL is available.
    - Installation now customizable, select what you want to install.
    - New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
    - CMSS2 is now available.
    - OpenAL 64-bit support.
    - Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
    - Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
    - Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
    - Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
    - EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
    - Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
    Undocumented fixes by Creative (not listed in the release notes):
    - Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
    - Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
    Release Notes:
    IMPORTANT: Driver uninstall on Windows Vista or later
    The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
    To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
    If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
    As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
    HOW TO INSTALL THE GAMEPORT DRIVER
    You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
    Just follow the steps shown in the screenshots.
    WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
    - Configure all settings and shutdown. Your settings will be saved.
    - This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
    - On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
    No problem With 62 or fewer buffers.
    OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
    There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
    The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
    Workarounds:
    - install the 32-bit (x86) version of Windows XP.
    - limit to less than 4GB the amount of RAM available to Windows.
    - enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
    - install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
    Karaoke effects make the audio play in mono
    You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
    Optionally, follow the steps below.
    Open EAX Settings, select a Karaoke effect, then click the Edit button.
    Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
    Repeat the steps for all Karaoke effects.
    These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows XP or later
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows Vista or later
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Equalizer and EAX effects are not available when using OpenAL or ALchemy
    Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
    There is no sound in games with OpenAL support
    Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
    Equalizer settings are not applied after using OpenAL or ALchemy
    After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are lost when speaker configuration is changed
    Bass and treble settings reset to their default values when speaker configuration is changed.
    Download:
    Filename: Audigy_SupportPack_5_3.exe
    File size: 120 MB
    CRC32 hash: 76110093
    SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
    Mirrors: Google Drive
    All files are property of Creative Technology Ltd, unless otherwise noted.

    Originally Posted by Dave_
    Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
    Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
    Anyway, I have a suggestion.
    Run EndPtUtl.exe found in the Audio Console installation folder.
    If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
    EndPtUtl.exe enables the use of any device for outputting encoded audio.

  • Issues with POWL action buttons and row selection after Support Packs

    We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt).  In fact all of the POWL lists that we are using are behaving the same way.  There are 2 changes that have happened after moving to this stack.
    1.  In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
    2.  All of the Action Buttons in the POWL lists are disabled.
    I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
    I've checked a side-effects report from OSS and have come up empty handed.  Has anyone else run into this?
    Eric

    I have found an OSS note that addresses this problem.  This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0.  The OSS note is 1363334.  Question Answered.

  • Open data extraction orders -  Applying Support Packs

    Dear All,
    I have done the IDES 4.6C SR2 installation.
    While updating the support packs, i get the message saying
    CHECK_REQUIREMENTS phase.
    Open data extraction orders
    There are still open data extraction orders in the system
    process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
    For more details about this problem, see Note 328181.
    Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
    I have checked the Note.
    But this is something m facing for the first time.
    Any suggestion!!!
    Rgds,
    NK

    The exact message is :
    Phase CHECK_REQUIREMENTS: Explanation of the Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.

  • SB Audigy Series Support Pack 3.1 (OUTDATED)

    <p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
    <p align="center">[color="#ff0000"]Use it at your own risk.
    Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
    Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
    ?Vista?SP2 / XP SP3
    Included in the pack:?
    - Audigy series driver 2.8.00.8 (latest beta)
    - ALchemy .30.00
    - Audio Console .32.02
    - DDL and DTS Connect License Activation 2.00.03 (*)
    - Dolby Digital Li've Pack 3.00.03 (*)
    - DTS Connect Pack .03.04 (*)
    - EAX Console 3.00.56 (Windows XP only)
    - Graphic Equalizer 2.00.65
    - MediaSource DVD-Audio Player 2.00.78
    - SoundFont Bank Manager 3.2.00
    - Speaker Settings 2.00.60
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    Does this driver improve sound quality or performance? Are there any tweaks?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    [img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
    Fixes and improvements:
    - Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
    - Fixes the enhancements errors in Windows?mixer and Windows Media Player.
    - Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
    - Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
    - Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
    - Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
    - Workarounds a bug that?unexpectedly resets the?speaker configuration.
    - Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
    - Implements Hardware CMSS Headphone by using a workaround.
    - Updates all InstallShield setup scripts to support Windows 7.
    - Fixes installation INI to properly install applications depending on the detected OS.
    - Removes COM workaround for Equalizer, fixed by Creative.
    - Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
    - Updates shared modules, responsi'veness on certain applications is improved.
    - Enables CMSS2 and Stereo Surround.
    - Fixes 32-bit ASIO not working on Windows 7 x64.
    - Fixes Encoder not available on Windows 7 x64 (related to fix above).
    - Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
    - Properly adds support for 64-bit OpenAL and 64-bit ASIO.
    - Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
    Undocumented fixes by Creative (not listed in the release notes):
    - Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
    - Fixes Equalizer Out of Memory error.
    - Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
    - Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
    - Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
    - Restores missing Microphone option in Surround Mixer (documented).
    - Fixes Microphone mute, volume and +20db boost controls.
    [size="3" color="#000000">?
    [size="3" color="#000000">Release Notes:
    Windows Security warning during driver installation
    When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
    Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
    Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
    Workarounds:
    - install the 32-bit (x86) version of Windows
    - limit the RAM available to Windows to less than 4GB
    - enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
    6. Speakers?incorrectly available on Windows 7 64-bit (x64)
    Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
    Do not choose that mode as it causes sync issues with Windows mixer.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows 7 / Vista / XP
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows 7 / Vista (requires Service Pack )
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Advanced EQ and Special FX not available on Windows 7 / Vista
    These presets don't work on Windows 7 / Vista.
    There is no sound in games with OpenAL support on Windows XP
    Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
    Equalizer settings are lost
    When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are reset when speaker configuration is changed
    Bass and treble settings are reset when speaker configuration is changed.
    DTS Encoder Switcher
    The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
    Thoroughly read the ReadMe.txt file included before using the provided?utilities.
    Hardware CMSS Headphone
    To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
    Playback Devices -> Speaker Properties
    Now check the Speaker configuration in "Playback devices".
    If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
    This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
    Microsoft Audio Home Theater Effects
    This driver adds the following audio effects, which are available depending on the current speaker configuration:
    - Bass Management
    - Speaker Fill
    - Room Correction
    - Loudness Equalization
    - Bass Boost
    - Virtual Surround
    - Low Frequency Protection
    Some effects are also available for the "SPDIF Out" device.
    Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
    Windows MIDI Device Configuration Utility
    Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
    Download:
    New version available here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
    All files are property of Creative Technology Ltd, unless otherwise noted.

    IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
    blunden wrote:
    EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
    daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
    http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
    http://www.mediafire.com/download.php?rjmznqa2oy
    Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
    Fixes an issue that prevents Speaker Fill from working.
    There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

Maybe you are looking for

  • Trapping problems with spot colors

    MAC 10.5.4 CS3 I have had two books present similar problems with one of our printers. Both books are 2 color. The first is 2 spot colors and the second is spot and black. The problem is that the traps are showing up as white. It looks like anything

  • Right format on a date, need help

    I get a dateparameter from my jsp. This is in format "dd.MM.yyyy". When I parse it to a date the result is e.g: Sun Feb 10 00:00:00 GMT+01:00 2002. How can I get this to be in the preferred format (dd.MM.yyyy)? My code is: SimpleDateFormat formatter

  • Firefox won't let me compose, or reply to, webmail

    When I use Internet Explorer to access webmail, I can read messages, delete messages, reply to messages, and compose messages. But when I use Firefox to access webmail, though I can read messages and delete messages, when I try to reply to messages o

  • Syncing 2 operating systems Tiger and Leopard on 1 Mac is this possible ?

    On my newly dual boot G5 I see myself living in both Tiger and Leopard equally and wanting to open access and update my Itunes, mail, calendar, and iphoto in either boot instance and be able to trust that all are in sync. Can it be done ? BTW the app

  • Is there an app for monitoring CELLPHONE usage? (Not data, calls, SMS, etc.)

    Hey! Is there an app for monitoring CELLPHONE usage? (Not data, calls, SMS, etc.). I know there's for data, but I wanna know if there's one that keeps track of calls, SMS, etc. Thanks!