SAP HR upgrade from 4.7 to ERP 6.00

Can someone share some documents like presentations, Functional Upgrade Testing, Data backup, recovery or strategy for HCM functional upgrade related to a Functional Upgrade from 4.7 to ERP 6.00..
Thanks in advance..
Offline sharing is discouraged.
Please use the HCM Wiki instead.
Thread is locked to stop email train!
Edited by: Suresh Datti on Aug 15, 2009 3:31 PM

Hi John,
You can reach basis people for documents...
But a few things to keep in mind...
After upgrade do all the integration testing, features updated or not.. and also suggest your client for Regression Testing..
kind regards rafi

Similar Messages

  • SAP AFS Upgrade from version 5.0 to 6.4

    Hi Experts,
    I wanted to know if someone here was familiar with the SAP AFS upgrade from 5.0 to 6.4. I wanted to know how exactly they improved the  areas listed below. (obtained from SAP Course). Your help would be greatly appreciated
    http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5b%5b|wdedaf||1||de|%5d%5d|
    1) Improvements in the areas of planned independent requirements, seasonal concept, value add services, Combined order, productionu2013 warehouse interface
    2) Production Planning Basic Data - Enhancements of AFS Bill of Material (AFS BOM), SKU Group Based Routing
    3) Manufacturing Execution u2013 Collective Planned Order Conversion, Combined Order Confirmations
    4) Batch Determination/Classification for SAP Apparel and Footwear
    5) Handling Unit Management for AFS
    Thanks,

    Hi Ronny,
    Thanks for the reply!
    These patches you speak of, is it for the types of issues I mentioned in my first post or do they cover the entire AFS functionality? I assume it still requires complex configurations but are there a lot of complications with going from AFS 5.0 to 6.4, compared to a new AFS 6.4 implementation? Specifically with the grids, categories and BOMs?
    /Cheers

  • Effect on IDOC while upgrading from 4.0B to ERP 6

    Hi all,
    We are upgrading from 4.0B to ERP 6.0.
    Are there any changes or modifications that has to be done for the IDOCs(which are developed in 4.0B).
    Any pointers will be very helpful.
    Thanks
    Sreekanth P Krishnan

    Hello,
    We have upgraded from 4.6C to ECC6.0 and did not have any port config issues.
    Things to look for:
      - RFC destinations, do they still work
      - directories used in File type ports, are they still there (they should be)
    Hope this helps a bit
    Regards
    Greg Kern

  • Help for Sap BW upgrade from 3.5 to 7.0

    Hi All
    Please can anyone help me in sap bi upgrade from 3.5 to 7.0.
    Please send me helpful documents and if anybody have already worked into similar projects please send ur email id.
    Willl appreciate the quick repsonse with points.
    Regards and Thanks
    Dheeraj Dua

    Hi Dheeraj,
    Check this- how to on BW 3.x Upgrade Checklist
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20bw%203.x%20upgrade%20checklist
    Please check this link and you will find all Upgrade guides
    https://websmp209.sap-ag.de/instguides
    Also Check this,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    this is a good PDF on Upgrade from BW 3.5 to BW 7.0
    latest on upgrade tp BI7.0
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
    You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
    /community [original link is broken]
    Hope This Helps.
    Regards,
    Ravikanth

  • SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

    Hi,
    We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2.  We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
    Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
    Could someone please confirm whether a database export and import is required for this OS upgrade scenario?  I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
    We are running
    - ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
    - XI(PI) Java & ABAP
    - SRM (Java & ABAP)
    - Portal (Java only)
    - PLM (Java & ABAP)
    - BW (BI 7.0) (Java and ABAP)
    Thank You
    Felicity

    Hello,
    You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
    Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
    Are you clear on this one ?
    Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
    Thanks

  • Any changes (SAP HR  upgradation from 4.7 to ECC 6.0)

    Hi
    could some one tell the major changes  while upgrading from SAP HR  4.7 to ECC 6.0, like
    1. changes in reporting
    2. data structures
    3. user exits
    4. infotypes.
    Many thanks
    Chinni

    I have questions experts:
    1. In case of upgrade / implementation of ECC6 what are the important consideration from testing point of view for all SAP HR Modules
    2. MSS and ESS is implemented for Performance Appraisal. One role and 3000 to 4000 users (Managers) and employee portion of Performance appraisals is in ITS as a URL service to the BSP page. This will be migrated to WebDynpro from ITS , could you please let us know what are the important functional parameters we should consider for the above activity
    I could not get apt information after searching the link
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Please help me out in getting the solution

  • SAP BW Upgrade from 7.0 to 7.3 For SAP BOBJ 4.0: Hardware

    Good afternoon
    I could not find any usable information on the net and I do not know where to look for the following regarding hardware requirements.
    We are planning to install SAP Business Objects 4.0 SP 02 and need to Upgrade our current SAP BW environment from 7.0 to 7.3.
    I need to know what the hardware requirements (sizing) are for the SAP BW side please?
    thanks in advance.
    Cj

    Hi,
    The EMC Solutions design center offers a free SAP storage sizing regardless of your current storage vendor.   It can be as easy as providing SAP Earlywatch reports.  See https://community.emc.com/docs/DOC-11310  If you are just looking for the incremental needs from the upgrade to the new release, that is more specific to SAP and your config.  Good Luck

  • SAP ECC upgrade from EHP6 to EHP7

    Is  GTS upgrade from NW 7.2 to GTS  7.3  to be mandated as ECC is getting upgraded from  ECC 6.0 EHP6 to  EHP 7 .  Why?

    Hi John,
    Your statement looks a bit misaligned.. There is no GTS 7.3 version, the SAP Netweaver 7.3* application server on which SLL_LEG GTS component sits.
    The underlying Netweaver AS versions between ECC and GTS systems can be different BUT what needs to be the same is the GTS plugin component in ECC and GTS components in GTS system itself, as best practice they should also be on the same support pack level.
    If the ECC upgrade from ehp6 to ehp7 requires you to upgrade SLL_PI gts plugin component in ECC, then in this case you should upgrade SLL_LEG component in GTS system to the same version.
    I personaly dont think its required, but check Service markeplace for, PAM Product-availability-matrix and other ehp 7 requirements..
    Hope this helps,
    Branio

  • Problems of Port Configuration while upgrading from 4.0B to ERP 6

    Hi all,
        We are upgrading a system from 4.0B to ERP 6. Will there will be any problems from port configuration side? If any please tell what they might be.
    thankyou.

    Hello,
    We have upgraded from 4.6C to ECC6.0 and did not have any port config issues.
    Things to look for:
      - RFC destinations, do they still work
      - directories used in File type ports, are they still there (they should be)
    Hope this helps a bit
    Regards
    Greg Kern

  • SAP LSO Upgrade from version 300 to version 600

    Hi experts,
    Please explain how you will upgrade LSO to version 600.

    The LSO 6.00 documentation can be found under SAP ERP 2005. Further information you can find browsing the following links:
    http://service.sap.com/customizing
    http://service.sap.com/instguides
    Also refer to these SAP notes:
    SAP Note No. 877851  - LSO: Activate/deactivate SAP Learning Solution
    SAP Note No. 1057572 - Incorrect entry in table T77S0 (HRLSO HRLSO)
    954138 -> Release Information for LSOFE 600
    830593 -> Installing LSOFE 600
    337623 -> Customizing after implementation or upgrade
    Please refer to note 830594.
    For Further information:
    Please review
    Difference: SAP Learning Solution - Training and Event Management
    All of the settings required for the SAP Learning Solution are contained under SAP Learning Solution in the sections Training Management and Learning Portal and Authoring Environment.
    The activities in the sections that follow do not apply to the SAP Learning Solution, but to Training and Event Management.
    Requirements
    You have already installed the SAP Learning Solution Add-On LSO.

  • Upgrade from 4.6C to ERP ECC 6.0

    Hi,
    Help!!! I'm running the prepare the first time and encountered this problem during the Kernel extract.  I received this message from '/usr/sap/put/EXTRKRN.LOG'
    1 ETQ201XEntering upgrade-phase "EXTRACTKRN_PRE" ("20061016131342")       
    2 ETQ367 Connect variables are set for standard instance access           
    4 ETQ399 System-nr = '', GwService = ''
    4 ETQ399 Environment variables:
    4 ETQ399   =<null>
    4 ETQ399   auth_shadow_upgrade=0
    1EETQ204 Upgrade phase "EXTRACTKRN_PRE" aborted with severe errors
    Ramon

    Hi Ramon,
    The major source of information should be the joblog of the job running APYSAP. During the upgrade this should be the joblog of the SAPup job.
    When trying to reproduce by hand make sure you have
    - SAPUP *LIB in your library list and an
    - empty target directory '/usr/sap/put/exe'.
    If you want you can frame your APYSAP call with STRO4TRC and ENDO4TRC from the 700 kernel library (add SAP700DEV to your libl only for the call of xxxO4TRC and remove it afterwards). Specify a trace id as a name, your job and qinter as the subsystem.
    HTH,
    Thomas

  • SAP Solman Upgrade from 7.0 to EHP1

    Hi Experts,
    We want to have upgrade for our solution manager from 7.0 to EHP1.
    Need your quick help to fix the plan of action.
    Regards,
    Abhinav

    Hi,
    There is nothing available read made.
    Yes,  i hope 2 days time is more than enough, more over its depends upon your system environment.
    We advice you to use Mopz for downloading all packages to avoid any discrepancy later.
    You might want to look into SAP Note
    Note 1169247 - Additional info for Solution Manager 7.0 EHP1 update[ Note 1169247 - Additional info for Solution Manager 7.0 EHP1 update|https://service.sap.com/sap/support/notes/1169247]
    All the best.
    Regards,
    Gagan Deep Kaushal

  • How to create new field while upgrading from CRM 4.0 to 7.0

    Hi ,
    How do we create new field on UI and store data into existing field in database?
    Is there any option in AET to skip the creation of new field in the database table ?
    Custom field is already created in GUI and database table while using CRM 4.0
    Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
    Using AET may create new field again in the database table.Please suggest.
    New filed needed to be created in Marketing Campaign Element Header data.
    Thanks
    Jayasri

    Hi Jayasri,
    As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
    These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
    For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
    For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
    I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
    Refer
    FAQ - SAP CRM Upgrade from release 4.0 to 7.0 
    Regards,
    Arjun

  • SAP HR UPGRADE

    Hi,
    Any documents related to SAP-HR upgrade from version 4.6C to ECC 6.0

    Hi.
    This forum is not an upgrade forum but ABAP General. I will lock this thread.
    Best regards,
    Jan Stallkamp

  • Mass Upload of user favourites from 4.6 to ERP 6.0

    We have a client who is Upgrading from 4.6c to ERP 6.0
    All of the users use their favourites for the transactions that they use.
    We are aware of the functionality to extract and upload the favs, however this will involve users.
    Is there a way to MASS upload all of the favs into ERP 6.0?
    What tables, structures are the favs held in?
    How have you overcome this in other Upgrade projects?

    Hi Mark,
    Are you going to do an Upgrade or will you be doing a re-implementation and data migration?
    If you are upgrading the favourites will still be available to the users in the target system after the upgrade.
    If you are re-implementing I am not sure there is a standard way for mass export/import.
    What I would suggest is stepping through function Module  MENU_FAVORITES_DOWNLOAD and try to simulate this for all users.
    Kind regards,
    Ronald G. Meyer

Maybe you are looking for