Sap hr version ECC 5&6
hi all,
can some one let me know the difference between the versions of SAP 4.7,ECC5&6..its really bothering to say that no one answers this question except the fact that everyone tells me that this is a upgraded version thats it...?
Im planning to take up my certification exam where i have been reading the material of sap4.7...with this knowledge can i go forward and attempt my exam? if this doesnt suffice please do let me know what would be the additions and how do i get that material?
kindly help me to make my journey successful.
Thanks & Regards
Geeth
Enterprise Services Architecture by SAP AG changed forever how their software products were to be fashioned going forward. During this transition period, SAP R/3 morphed into R/3 Enterprise and finally ERP Central Component. Why? Strictly a client/server-based product, SAP's venerable R/3 offering was never intended or designed to support Web Services or a service-oriented architecture. Thus, in a nutshell, ECC represents the natural evolution of R/3 toward an architecture based on Web Services.
Beyond architecture, R/3 and ECC differ in other fundamental ways. Many of the differences reflect SAP AG's willingness to listen and learn from their customers. Changes to the technology stack, how it is installed, and perhaps most importantly how it is maintained account for most of the core differences between the two products; these and other differences are covered in the following sections.
Technology Platform Differences
The fact that ECC sits upon SAP's newest WebAS platform represents perhaps the most obvious technology difference between it, R/3, and R/3 Enterprise. Interestingly, R/3 Enterprise also sits atop a version of WebAS, albeit older (6.20). The differences between the two products are summed up in how these WebAS platforms differ. WebAS offered mature XML and HTTP support in version 6.10, but did not introduce support for Web Services and J2EE until 6.20. With SOA in its infancy, and only the initial framework for ESA being put together in Walldorf at the time, SAP AG needed an update to its R/3 solution, but at the same time wanted to hold a carrot out to customers to wait just a bit longer. With WebAS version 6.30, the Java stack and true Java development capabilities were introduced. Finally, with 6.40, both the ABAP and Java stacks were updated, and the entire platform was dubbed mature, ready to take on the world of Web Services, to enable Java development, and to host joint ABAP/Java deployments. Today, the entire NetWeaver '04 solution, including SAP ECC 5.0, is built on WebAS 6.40.
But what of plain old R/3? The vast majority of SAP R/3 customer installations today are getting up in age, to the tune of four to five years (ancient for an ERP solution). Although the tide is slowly turning, SAP R/3 versions like 4.6C, 4.6B, and even 4.5B greatly outnumber R/3 Enterprise and ECC deployments. These legacy installations (the term legacy is appropriate, I believe) sit not upon WebAS but rather SAP's original custom application server, coined SAP Basis or the Basis layer.
The Basis layer was SAP's extraordinarily successful attempt at hiding the complexities of multiple database and operating system platforms. And its three-tiered design solved problems of scalability and performance that other solutions in its day faced unsuccessfully. Basis was never intended to support the Web, though; indeed, the Internet itself represented the great unknown back when SAP Basis was introduced. To that end, when SAP finally first provided web support, it did so with a completely separate product, SAP Internet Transaction Server (ITS). And the SAP Basis platform merely served as the back-end to this decidedly front-end-focused solution geared toward enabling HTML-based web users with the opportunity to access SAP.
Similar Messages
-
An upgrade of ERP SAP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10 is being planned in the company I work for. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?
Regards, AlejandroHi _Miguel
I am going from ECC 6.0 to ECC 6.06. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version 6.0 to 6.06
regards, Alejandro -
Euro exchange rate in sap 6.00 ecc version
dear all,
We are recently implementing sap in our company.we are following sap 6.00 ecc version. we have taken E.rate types B for selling , G for buying , M for average.
But for EURO it is asking for type EURX only.but I want to define buying and selling rates for EURO also.can anybody tell how to define buying and selling for EURO also.Hi,
nevertheless you will always do the postings in M. If you want to post to use G or B you have to put in the rate type manually. That means you can maintain the KNVV-KURST manually with another course type.
to your problem. It is also possible to use the EURX. And in special cases like KNVV-KURST you can choose the exchange rate G or B manually. The document in this case will be posted later with G or B. KNVV is only an example
Please check. But it should work.
Best regards
Volker -
Sap Archiving u0096 STO error on version ECC 6.0
Hi experts. I take a long of time with this error and I hope that you can help me. Explain the program.
We have a archiving project of no standard objects. This objects run on Sap version 4.6C, but now, on version ECC 6.0, the Store program give a execution error. The log of the STO Job on Sara transaction is the follow:
Job started
Step 001 started (program RSARCH_STORE_FILE, variant , user ID ARUIZ)
Archive file 000241-001ZIECI_RF02 is being processed
Archive file 000241-001ZIECI_RF02 does not exist (Message no. BA111)
Error occured when checking the stored archive file 000241-001ZIECI_RF02 (Message no. BA194)
Job cancelled after system exception ERROR_MESSAGE (Message no. 00564)
The Write and Delete programs runs correctly.
A strandar Archiving Object like FI_TCJ_DOC runs Ok (WRI, DEL and STO programs). The customazing for both objects are nearly on OAC0, FILE transactions. The changes are on Sap Directories. Write for you the most important customazing actions:
Transaction: FILE
ZIECI_RF02 (No Standard)
Logical File Path --> ZZA_ARCHIVE_GLOBAL_PATH
Physical Path --> /usr/sap/CX6/ADK/files/ZA/<FILENAME>
Logical File Name Definition -->
ZZA_ARCHIVE_DATA_FILE_ZIECI_RF02
FI_TCJ_DOC (Standard)
Logical File Path --> ARCHIVE_GLOBAL_PATH
Physical Path --> <P=DIR_GLOBAL>/<FILENAME>
Logical File Name Definition --> ARCHIVE_DATA_FILE
Transaction: AOBJ
Customazing settings:
ZIECI_RF02
Logical File Name --> ZZA_ARCHIVE_DATA_FILE_ZIECI_RF02
FI_TCJ_DOC (Standard)
Logical File Name --> ARCHIVE_DATA_FILE
I prove to put in own archiving object (ZIECI_RF02) the logical file name -> ARCHIVE_DATA_FILE too and the error go on.
In the others parameters the values for both objects are:
Delete Jobs: Start Automatically
Content Repository: ZA (Start Automatically)
Sequence: Delete Before Storing
I see the point of the storing STO program (RSARCH_STORE_FILE) where own archiving failed. I made a program with the function and debbuging this can see the next:
REPORT zarm_06_prueba_http_archivado.
DATA: LENGTH TYPE I,
T_DATA TYPE table of TABL1024.
BREAK ARUIZ.
CALL FUNCTION 'SCMS_HTTP_GET'
EXPORTING
mandt = '100'
crep_id = 'ZA'
doc_id = '47AAF406C02F6C49E1000000805A00A9'
comp_id = 'data'
offset = 0
length = 4096
IMPORTING
length = length
TABLES
data = t_data
EXCEPTIONS
bad_request = 1
unauthorized = 2
not_found = 3
conflict = 4
internal_server_error = 5
error_http = 6
error_url = 7
error_signature = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
If execute the program, SAP returns the next error:
Error in HTTP Access: IF_HTTP_CLIENT -> RECEIVE 1
The sy-subrc variable value is 6 -> error_http
The call of the method is the follow:
call method http_client->receive
exceptions
http_communication_failure = 1
http_invalid_state = 2
others = 3
sy-subrc value is 1 -> http_communication_failure
The unusual of the case are that the Archiving Objects work on SAP 4.6C perfectly,
furthermore on version ECC 6.0 the standard and no standard objects uses Sap Content Server with the same connection (HTTP), IP, PORT and Repository.
I hope that anypeople can help me. A lot of thanks for your time.
Best Regards.Hi Samanjay.
Answer your questions:
1) I proved the archiving from Sara with the Object ZIECI_RF02 with both customazings. The Stored program fail with logical file name = ZZA_ARCHIVE_DATA_FILE_ZIECI_RF02 and logical file name = ARCHIVE_DATA_FILE (Example at answer 2).
2) AL11 Transaction (Sap Directories):
/usr/sap/CX6/ADK/files/ZA/
cx6adm 09.04.2008 18:02:15 ZIECI_RF02_20080409.180215.ARUIZ
This is the Fich from ZIECI_RF02 on AL11. I prove this yesterday. The variable name: 000241-001ZIECI_RF02 is the generate to save the fich on repository ZA. In this case the variable name is: 000342-001ZIECI_RF02. Can view this with the table ADMI_FILES on TA SE11.
Entries on ADMI_FILES with create date = 09.04.2008
DOCUMENT: 342
ARCHIV KEY: 000342-001ZIECI_RF02
CREAT DATE: 09.04.2008
CREAT TIME : 18:18:28
OBJ COUNT: 1
FILENAME: ZIECI_RF02_20080409.18182
STATUS OPT: Not Stored
STATUS FIL: Archiving Completed
PATHINTERN: ZZA_ARCHIVE_GLOBAL_PATH
CREP:
ARCH DOCID:
Now, I put the same information from FI_TCJ_DOC (Standard Object):
AL11 Transaction (Sap Directories):
/usr/sap/CX6/SYS/global
cx6adm 10.04.2008 11:24:15 FI_FI_TCJ_DOC_20080410_112409_0.ARCHIVE
Entries on ADMI_FILES with create date = 10.04.2008
DOCUMENT: 343
ARCHIV KEY: 000343-001FI_TCJ_DOC
CREAT DATE: 10.04.2008
CREAT TIME: 11:24:09
OBJ COUNT: 2
FILENAME: FI_FI_TCJ_DOC_20080410_112409_0.ARCHI
STATUS OPT: Stored
STATUS FIL: Archiving Completed
PATHINTERN: ARCHIVE_GLOBAL_PATH
CREP: ZA
ARCH DOCID: 47FD890364131EABE1000000805A00A9
Finally, made the example with Archiving Object ZIECI_RF02, but assigning the standard logical file.
AOBJ (Customazing settings):
Object Name: ZIECI_RF02 Archivado de datos: Facturas de Baja
Logical File Name: ARCHIVE_DATA_FILE
Now, execute the archiving at SARA transaction.
AL11 Transaction (Sap Directories):
/usr/sap/CX6/SYS/global
cx6adm 10.04.2008 12:33:25 FI_ZIECI_RF02_20080410_123324_0.ARCHIVE
Entries on ADMI_FILES with create date = 10.04.2008
DOCUMENT: 345
ARCHIV KEY: 000345-001ZIECI_RF02
CREAT DATE: 10.04.2008
CREAT TIME: 12:33:24
OBJ COUNT: 1
FILENAME: FI_ZIECI_RF02_20080410_123324_0.ARCHIVE
STATUS OPT: Not Stored
STATUS FIL: Archiving Completed
PATHINTERN: ARCHIVE_GLOBAL_PATH
CREP:
ARCH DOCID:
It´s that the unusual. At first, I thought that´s the problem was the directory of SAP, but with this proof I looked a new error reason.
3) The details of repository ZA are:
Content Rep: ZA
Description: Document Area
Document Area: Data Archiving
Storage type: HTTP Content Server
Version no: 0046 Content Server version 4.6
HTTP server: 128.90.21.59
Port Number: 1090
HTTP Script: ContentServer/ContentServer.dll
Phys. Path: /usr/sap/CX6/SYS/global/
Too much thanks for your answer and your time. If you have any doubt, question me.
Best regards. -
Siggestion needed : SAP Certification Program ECC 5.0 versions
hi could you please suggest where i could get good study material for this certification.
SAP Certification Program ECC 5.0 versions
thanks in advance,
Naval BhattHi,
I have answered this query in detail, please view the below link. Have also provided the link to download the required material for WAS 640 certification.
WAS Certification
rewards points if helpful.
Awaiz. -
Differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Dear Friends,
Please mail to me the differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material Material management module.
With regardsHi Vasmi
There is lot of Diffenence Between ECC 6.0 & 4.6 C
1-in 4.6 C Country India Version(CIN) is add on Separatelly
while after 4.7 E up to ECC 6.0 CIN is integrated Part of SAP. that is the measure difference as per my knowledge
2-ECC 6.0 have more functionality in terms of transaction for example
if you do MIGO for PO then you can capture and post the excise invoice in the same transaction while in case of 4.6 C that feature is not available
these two are major as far as MM is concern
there are many others feature also
Thanks -
Difference between SAP R/3 , ECC and MySAP
Hi,
I would like to know the difference between SAP R/3 ,ECC and MySAP. Please let me know the difference , the links earlier found were not getting into my brains.
To my understanding the SAP R/3 4.5b,4.6c - earlier versions contains the basic modules like Logistics(MM,SD) and PP (core functional modules), on technical point the little function modules were obsolete in these version.
4.7 (included the Web application server,for web based and integrating with XI,Enterprise core ,Enterprise Extensions ) + core functional modules +.HR + FI/CO+ SCM (MM,WM,PP) + PLM
ECC (Enterprise Core Component) - ?
MySAP - ?
Correct me and also your answer will help me understand better.
Regards
ShawnECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful. -
RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0
We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help. -
Error "Please use the Latest SAP GUI version" in service admin
Hello everyone,
I have successfully installed ITS 6.20 & We are using ECC 6.0, But when I try to logon to the Admin service. I gives an error message saying <b>"Please use the Latest SAP GUI version"</b>.Please help me solve this problem.
Regards
SubramanyaHi,
several instances of ITS 6.20 have to be mapped either to
a) different TCP/IP ports or
b) if the same TCP/IP port should be used they have to have an individual hostname.
These settings have to be defined correctly in ItsRegistryWGATE.xml.
Please have a look at this thread for further information:
Re: How to register agates with the ADMIN instance
You could also search within this forum for the keyword "ItsRegistryWGATE.xml" or do a SAP Notes search to get more information.
Also please read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/211cc811f21a74e10000000a1553f6/frameset.htm">ITS Administrator's Guide</a>
Best regards
Henning -
Documentation on differences between Version ECC 6 and Old version
We are looking for information/documentation on differences between Version ECC 6 and Old version for HCM. Appreciate for your great help.
Best Regards,
EricHai..
Re: differnce b/n 4.7 and ecc 6.0
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
https://websmp210.sap-ag.de/releasenotesRelease Notes
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/ -
Hi,
The installation of version 4.7 requires 82 GB of Hard disk and 2 GB of RAM and at the same time Version ECC 6.0 requires almost 250 GB of Hard disk and 4 GB of RAM.
Considering the above facts, there is a huge difference of hardware requirements between these versions.
My questions are,
1. Is there only a difference of new ledger concept in between these versions? or there is any other considerable differences in between them? (The question is raised cause of huge hardware differences)
2. Please suggest, is it better to get trained on ECC 6.0 or 4.7? or there is no any material issue on version aspect as such.
Please suggest.
Thanks for your time.
Moderator: Please, read and respect the rules of SDNDear Mr.Hari Babu,
As per my earlier query I have a query which requires your attention and help. Please do let me know if my Laptop which has got a configration of 2.00 G.B Ram and 32 bit operation system with Vista as operation support SAP ECC 6.0 IMG version.
As advised by you I have checked with the technician he informed that he would install VM wear but he informed he would install SAP 5.0 version.
I have undergone training in ECC 6.0 in FI and CO module. Would like to do lot of practice in by installing ECC 6.0 version. Please do write to me in detail.
Thank you very much and look forward to hear from you soon.
Regards,
C.R.Srinath -
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S BHi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric -
Creating Datasource and Extracting from SAP R/3 ECC 6.0
Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KKYou can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps! -
Build is not working in SAP NWDS version 7.0.09
Suddenly the build is not working for my SAP NWDS version 7.0.09. It used to work fine before.
When you create a DC and do a Development Component --> build . nothing is happening. In the
General user output view, nothing is printed also.. I think the built is not actually happening now. So I tried uninstalling the NWDS and installing again. I also tried changing the default workspace. But still the problem do exist. what can be the possible reasons for this ? Please help.. Your valuable answers will be highly appreciated.Hi Garcia,
I have checked with the Network team who manages Exchange server and they have mentioned that it is bouncing back from our CRM host with the error as below,
said: 553 5.1.8 <[email protected]>... Domain of sender address
[email protected] does not exist (in reply to MAIL FROM command)
Regards,
Arpit -
Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640
We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640.
We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release the web service definition from WSCONFIG, we get an error saying:
"Error when creating web service(Web Service Definition Z_WSD_CUSTOMER_BAPI for SOAP application unbekannt)"
Please help...
Thanks,
ShaileshHi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs TYPE bukrs,
l_belnr TYPE belnr_d,
l_gjahr TYPE gjahr,
lr_belnr TYPE RANGE OF belnr_d,
lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
FROM zpi_test
WHERE bukrs EQ l_bukrs
AND belnr IN lr_belnr
AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
l_belnr = '4700000000'.
ELSE.
l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.
Maybe you are looking for
-
Created on field in CN42N report
Hello We want to have the field "Created on" in transaction CN42N. You have this field as dynamic selection but it is not available in the output. I have alreaday read the threads here in the forum and the only recommendation was to implement note 43
-
I'm new to labview and I'm having a problem stopping a while loop (running windows XP/2000 with the student edition of labview express 7). I'm doing a data acquisition program where I'm constantly reading in voltage and comparing it to a set point va
-
Will the motorola H620 Bluetooth work with the Iphone 5?
Will the motorola H620 Bluetooth work with the Iphone 5?
-
BTW the id and pw I use just got me logged into this forum on my iPad. The program I can,t log onto is adobe LR.
-
Freeze clips after sending RED-Project to Color
I have a RED project, edited in Final Cut. there are some RED reference files consist from 2 RED clips. the clips in project are linked with the 4k reference files (-F.mov an the end) but in the file container there are 2 or 3 RED files the reference