SAP HR workflow for Family Medical Leave Act (FMLA)

Guys,
Is there any standard workflow for Family Medical Leave Act (FMLA)?
Please  let me know.
Thanks,
Paresh
Edited by: paresh sonavane on Jul 21, 2011 2:55 PM

I don't  know, what did SWDM reveal?

Similar Messages

  • SAP Standard Workflow for REFUNDS in FS-CD

    Hi
    We have a requirement to implement SAP Workflow in Financial Services Collections & Disbursements (FS-CD) module for REFUNDS Approval.
    Is there any SAP standard Workflow available to meet the requirement?
    How to find the Standard SAP workflows available for different Modules (MM, SD, PM, FI, FS-CD etc)?
    Correct answers will be rewarded with points.
    Thanks
    Nikhil.B

    Just to add:
    The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
    Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

  • SAP Standard Workflow for PR Release (with user exit)

    Hi SAP WF Gurus,
    Good day!
    I just wanted to check with you if you have ever used a user exit in the activation of the standard workflow for PR (overall ( release. What we have is a two0step approval process wherein each level has a proxy/alternate approver. We used the available user exit to accommodate this customer requirement since the standard release would only allow us to define 1 approver as a prerequisite for the next level. We were able to execute this on the first level approval; however, we observed that the workflow is not anymore triggered (i.e. does not send work items to agents) for the level 2 release. My questions therefore are:
    1. How to set up SWEC? I already executed SWELS and SWEL to check if the events are being created and event linkage is automatically deactivated after running into an error regarding the binding...My initial SWEC setup is for BANF BUS2105 RELEASED On Change. I am assuming that since the workflow was released from the first level, this should be the starting point
    2. How to rectify the binding error? I already executed automatic binding in the WF header for the start events but still face it
    Your inputs/comments are most welcome
    Regards,
    DeLo

    Just to add:
    The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
    Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

  • How to configure and test workflow for Creating a leave Request?

    Hi,
      When I select <b>leave request</b> iView I get an R/3 screen  titled "Create Leave Request".And when I fill in the details for <b>approver</b> and press <b>send</b> I get this error message <b>"You are not one of the possible agents of the task"</b>.
    So help required to configure and test the workflow behind <b>Create leave request iView</b>.
    Regards,
    Pavanmeet.

    Pavanmeet,
    you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
    check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
    logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
    you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
    Message was edited by: Achim Hauck

  • Workflow for PR release

    Dear Experts,
    We have implemented SAP standard workflow for PR item release i.e WS00000038, when I reject a PR notification is not sent to initiator.
    If I see In SWEL - When a PR item is rejected system is picking up step "PR item significantly changed" instead of "Item release cancelled"
    Request your suggestions in this regard.
    Thanks,
    Uzair

    Hi,
    Please see the below thread, it may help you.
    Re: Trigger Purchase Requsition Workflow trigger after purchase req. changed

  • SAP Business Workflow in a multiple ERP environment

    Hi,
    Our organization is looking to implement Peoplesoft for HR and SAP ERP for other business processes. Business users would ues UWL for their approval tasks. The SAP Business workflow or SAP NW BPM would be the tool for the approval process. Question: is there best practice for this scenario? I.e. the business process is designed and implemented via SAP ERP or SAP NW BPM and the HR maintains the organizational structure in Peoplesoft (or a non-SAP ERP) environment.
    To my knowledge, the following options are available for SAP Business Workflow for agent determination (approval process):
    1. Implement a realtime design (e.g. RFC) to connect to the non-SAP ERP: the non-SAP ERP would implement agent determination rules that can be called by SAP, since the Org. structure is maintained in that environment
    2. Share the Org. structure and HR data with SAP: not preferred option, I guess, due to sync problems (not realtime)
    Your input is much appreciated.
    Thanks.

    Hi.
    I would consider carefully that do you even need the HR structure in ERP for your non-HR business processes? What kind of workflow processes will you have in ERP that require HR structure?`Aren't your HR processes in Peoplesoft system, and you are running the HR processes there? You don't necessarily even need the HR structure in SAP. Maybe you can build your own approval "paths" with some other way. Invoices can be approved by WBS responsible users (not organizational managers), etc. Or maybe you can build your own simple approval organization in HR, etc.
    Also pay attention to the fact that the approvers in workflow will eventually be the users - not employees. So if you have org.structure in Peoplesoft, you should also map the SAP users to this organization/employees. I mean that if you can do some kind of RFC or web service call to Peoplesoft system to find the approvers, you should pay attention that the SAP user ID is found.
    Think really carefully what you will do. Maybe sharing the HR data with SAP is not that bad idea either (I have no idea how difficult this is between SAP and Peoplesoft). I don't see that org.structure is something that must be "real-time". It is just fine if it is updated for example once in a way - IF it is used only by workflow for determining approvers.
    Just think carefully before you do something unnecessarily complex.
    Kind regards,
    Karri

  • Standard workflow for FBD1

    Hi FI Guru
    As per requirement,we have to create approval flow for recurring document (created in FBD1 for first time) also like FV60.
    Is there any SAP Standard Workflow for this and how to see that.
    Thanks in advance

    Hi,
    There is no standard flow for the down payment request generally in many projects down payment requests are rarely created process starts with Down payment request F-47 then Down payments F-48
    then clearing of Down Payment f-54
    Down PAyment request is just a template.If you want to use then use then u can skip this step.
    regards
    Deepa

  • Outlook Express Integration with SAP Business workflow

    Hi,
    There is a user requirement for Outlook Express Integration with SAP Business workflow for PR approvals.
    They want a link to be put in there outlook inbox so that the approvers can directly release the PR's worklist without seperately login into the SAP system. We are using 4.7 version.
    I went through some ABAP material where i came across T-Code SCOT and Program RSWUWFML to schedule a job to pull worklists. But Iam not sure about this.
    I want to know that whether this is possible in first place and if it is then how can we do it.
    Regards
    Vivek Nair

    Hi ,
      Thanks for the link..
    but its not the one I have been looking for ragarding the mentioned scenario.
    !)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
    2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
    Could u pls explain me how the concept could be and Integration method.
    Thanks in advance
    I appreciate all your help.

  • Extended Notifications for SAP Business Workflow

    Hi expert,
    i need your help!!
    i have configured the "Extended Notifications for SAP Business Workflow" with the tnx SWNADMIN and this was successful. I can write emails, but i can read this only on SAP GUI with the tnx SOST. I don't receive email on my email-address.
    can you say me, where is the problem?
    Thank you in advance
    marcel

    Hi Marcel
    Rope in your Basis Guy!
    Basically, your Extended notif part is working fine..... emails reaching SOST is proof. Going out of SAP may need basis config.
    What do you see, a yellow triangle or a red light in SOST?
    Regards,
    Modak

  • Workflow for EP without SAP R/3

    Hi WF Expert,
    I am new to SAP EP Workflow, currently working on my first project. This is a project for a University, wherein we have to implement students admission process for distance education . We have to using WebDynpro tool for this portal and backend oracle database.Here there is no SAP R/3 server only EP server.
    So my question is that without SAP R/3 admission process workflow is possible in portal or not. If yes how can i develop / configure and customizing the same workflow. Is there any tool in EP here we can do this.
    Please any one can guide me the same and send me some documents which is related to EP workflow..
    Regards,
    Jnana Ranjan

    You can use Guided Procedures which is a "light" edition of Business Workflow.
    Search for 'Guided Procedure' and you will find a lot of documentation and material guiding you through implementation of various types of solutions.

  • Use of ADOBE form with SAP workflow for R/3 4.6C

    Hi All,
    We are thinking of usage of ADOBE form feature as one of options to design workflow for creation and maintenance of “Info record” like “Material Master” creation. BTW the existing systems are EP 7.0 with the back end SAP ERP system 4.6 C
    We would like to just check the feasibility of usage of ADOBE interactive form for above scenario. Would it be possible to go ahead with the above concept or what would be pre-requisites or risks involved?
    1.     How would system identify the role to direct the Adobe form for approval in case the form is raised by multi department?
    2.     How can the data validations in ADOBE form happen with reference to SAP std. tables?
    An early reply would be appreciated.
    Rgds,

    Hi,
    If you use EP 70 you can used guided procedure for your requirement .
    Regards

  • SAP Workflow for vendor invoice is posting into past?

    Dear experts
    I have a heavy problems with the workflow for vendor invoices. The following example demonstrates it:
    I have created a vendor invoice on 1st of December 2011.The responsible person has checked and released this invoice on 3rd January 2012. In Customizing it is setup that posting date will be overwritten with system date.
    Does anybody has an idea why it is not posted in January 2012?
    What does the workflow? It is posting that invoice with posting date 1st December 2011 not with 3rd January. If I have a closer look into the head of the SAP document the following parameters are shown: document date: 1st December, posting date: 1st December, entry date: 3rd January.
    Does anybody has an idea why entry date is 3rd January?
    Thanks in advance
    Udo

    Dear expert
          It is not standard behavior for the posting date to overwrite the document date - at least its not something that I've ever come across. I'm wondering if there is a custom substitution on your system that is overwriting the document date . Check t-code OBBH. The substitution is most likely at the document header level.
    Regards
       Ajeesh.s

  • SAP  workflow for purchase requisition and purchase  order

    Hello  Sap Workflow,
    Can you  please help me on  building workflow for purchase requisition and  purchase order    with  the necessary screen shots  ?
    your quick response  will be greatly appreciated.
    Thanks in Advance

    Hi,
    Please check http://help.sap.com .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
    Configuration guides are available in SAP Solution Manager.
    Regards,
    Masa

  • Cookbook for SAP BUSINESS WORKFLOW

    hi all
    can anyone please send me the cookbook for SAP BUSINESS WORKFLOWS which may include the scenarios and technical details of creation of workflow.
    my id is : [email protected]
    full points will be rewarded
    regards
    ashish

    Hi Ashish,
    If you are beginner you can have a look at following blog.
    There is step by step video for your 1st Workflow.
    /people/ginger.gatling/blog/2007/09/11/creating-your-first-sap-business-workflow
    Then other links will give more inputs:
    /people/ginger.gatling/blog
    Have a good time
    Anthony

  • SAP Organizational Plan for SAP Business Workflow

    Hi,
    This is question is specific to SAP Business Workflow within ECC, relating to SAP Organizational Management:
    We have more than one instance of SAP, where one instance is used to run all of our business, except SAP HR (let's call this SAP Instance 1), and another instance that is only used for SAP HR (let's call this SAP Instance 2);
    We want to implement SAP business workflow (e.g. approving requisitions through workflow in ECC);
    Is it possible to use our SAP organizational plan that is already defined in our SAP HR instance of SAP (SAP Instance 2), instead of defining an SAP Organizational plan in SAP Instance 1 only to support SAP business workflow. 
    Is it possible to define an interface from SAP Instance 1 to 2, to look up the requisition approver, pass it back to instance 1, and then send the workflow to the appropriate person.  Or is there another better approach?  e.g. Replicate organizational plan that exists in instance 2 in instance 1?  SAP tools for this?
    From what I have briefly read online thus far, I understand that "The organizational plan is part of the PD component "Organization and Planning. The organizational plan is maintained on a client-dependent basis. An organizational plan which was created for personnel management purposes (or is to be created) can be used in SAP Business Workflow without any changes, provided the workflow functionality and the personnel management application run in the same client."  To me, this sounds like that the workflow functionality and organizational plan must exist in the same system and client.
    Any thoughts, suggestions, or any advice to share?
    Cheers,

    Hi AD1981,
    Standard solution would be using distributed Organisational Management. There is custom ALE for this (check tcode SALE: Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Predefined ALE Business Processes -> Human Resources -> Master Data Distribution -> Set Up Distributed Organizational Management). Basically you would maintain organsation in HR system and distribute changes to other instance using ALE. Workflow would rely on the distributed org. structure.
    Regards,
    Saku

Maybe you are looking for