SAP IAC Iview and script error

I am using the SAP IAC script to start an SRM 4.0 system via SSO.
SSO works fine, but after the overview-page appears, none of the menu items/links inside SRM works and I can see javascript errors in the page log.
Any hints?
TIA -hs

As usual, SAP sees it as strategic feature rather than a bummer:
In the world of ESA and ERP 2005, you don't use full applications as provided with bbpstart, but rather a series of "atomic" transactions, and together with the new feature of "Guided Procedures" in EP 7.0, you can tailor your own, personal set of transactions for your users with your own workflow.
While this is not a bad idea, it is a lot of work and the "One Shot Solution" like bbpstart should be an option too.
But, hey, it is strategic!

Similar Messages

Difference between IAC iview and Transaction iview

HI Experts,
Difference between IAC iview and Transaction iview................
Higher points will be rewarded for useful inputs.......
Thanks in Advance,
Shakthi

Hi Shakti,
Transaction Iview is to navigate to required transaction eg se80 etc of backend ,it can be used for various purpose for eg to test weather SSO is properly configured or not if yes Transaction Iview should navigate user to mentioned transaction in the iview with out asking for user id and password.
and IAC Iview is Internet Application Components
please go through this link
<a href="https://service.sap.com/~sapidb/011000358700000473342002E/">check</a>
Internet Application Components(IAC) are complete business solutions for linking mySAP.com components to the Internet. With IACs users can access business information in mySAP.com components by starting SAP transactions, function modules or reports from a Web browser.SAP IAC is a productive way to programm to prgramm backen transactions in html
for creation of IAC Iview ckeck this link.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/6898dddb7afd44b07ca4e3bb15f676/frameset.htm.">creation of IAC IVIEW</a>
Hope this works
Please allot points if helpfull.
Regards
Vinit.

Very Slow and Script Errors

Contribute 6.5 is very slow to publish new content to our site www.mrii.ie, even bringing up a page for editing is slow. So far I have:
Tested the the FTP settings using passive and active connections.
Using an external FTP program, downloading from the site is very quick 2. I checked all the file permissions on the server and they are correct. In fact Contribute will publish the changes eventually, just very slowly prior to the actual upload which seems pretty quick.
I also used a plain page with a small amount of text and again the pre-processing seems slow.
I removed the temporary sites and configuration folders and still no change.
I created a new connection.
As an aside, how do I disable script errors in the Contribute browser window?

OK, found it. This fixed my performance issue.
https://discussions.apple.com/thread/2536941
This fixed my Genius issue:
Turned Genius off
Closed iTunes
Launch Safari
Preferences/Security/Cookies
delete the apple.com entries

SAP ERP - CTS and Backup error CPIC-CALL: 'ThSAPCMRCV'

hello All,
I have some issues with transport system and when I try to schedule backup jobs in my ERP system. When I try to reconfigure my transport system the following message:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
Al ejecutar el reporte RSTPTEST se presenta:
Check Transport Tool                                       12.10.2011 16:32:11
       DES System DES
           tp Interface
           Transport Profile
           RFC Destination
           tp Call
I executed the report RSTPTEST   and the result was successful.
Another error is generated when I try to schdule the backup jobs in DB13:
Name and Server     : cobogsap01 - cobogsap01
DBMRFC Function     : DBM_GETF
Command             : DBMMDF
Error               : System Error
Error Message       : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20
I checked the connection between SAP and DB and is OK. I found in some forums and SAP Notes that this error can be fixed with a kernel update, so I updated the SAP kernel, TP and R3trans files but the error continue.
I don't know what more I've to check, so I need your help to solve this issue.
Thanks
HEPC

hello Michael,
I could fix the transport system, was a network issue, but the DB13 error continue, now when I test the DB connection the following error is show by the PRD system.
Connect. test with "dbmcli db_state"                         Unsuccessful
I decided to close this message and open another in MaxDB forum.
Thanks
HEPC
Edited by: Hernando Polanía C on Oct 18, 2011 6:32 PM

I'm getting Constant "Not Responding " and "Script Error"

For a while now I have been getting a "Mozilla Firefox Not Responding " message and Firefox will slow down and keep not working, I'll also get a "Script Error" pop up box that keep reappearing around when the "Not Responding" messages happen. I have tried reinstalling Firefox but it hasn't helped. I don't have any extensions enabled and I have tried going to the site http://kb.mozillazine.org/Unresponsive_Script_Warning but cannot understand what it is suggesting for me to do. I am not very good with computers and need some actual help to get rid of these unresponsive scripts and stop Firefox from not responding. It is happening more and more frequently and is a big problem as I work from my computer.

I am having the same problem, and from what I can understand from the suggested articles, they offer the opposite of what I want.
The "Firefox hangs" and other articles seem to assume that you want the script to respond. I don't.
What I want is for a script to be given a limited amount of time to respond. If it does not respond in that time, it is stopped automatically. No slow down, no pop-up, no manual decision. Just make the script stop before it can suck up so much processing power that nothing else can happen.
My problem is that the sources of the unresponsive scripts are Hotmail and Gmail almost all the time. So I can't just tell the sites that they can't run scripts. But they will have the "script stopped responding" issue even when I am not using them, and I will have to figure out that this has happened because my computer stops functioning, and even then I have to visit each website to figure out which one is causing the problem. And the computer remains slow for several minutes after stopping the script.
As far as I am concerned, there is nothing that Hotmail or Gmail could be doing that requires the full attention of my computer and myself. I would rather have the webpage just close then let the script suck up all my power. So I am not in need of something that will let scripts have more time to work, I need something that will limit the time scripts have to work before they are stopped.
However, the email programs seem to work fine after the script is stopped, so whatever was going on can't be very important.
I have tried the recommended reset of firefox, remove the extensions, script-blocker add-ons. But the problem is specifically these email programs and using them is unavoidable.
So what I am looking for is a way to shut down a script before it becomes a problem.
Thanks for any help.

Firefox 13.0.1 and script error and crash

FF keeps crashing - script errors on pretty much every site. Reset FF and it does no good. Add ons disabled, all extensions updated. This just started happening within the past few days. No viruses. HELP!!!!!!!!!

''Can this be forwarded to the Mozilla bug team, or some other technical support?''
Hi tuatha, you can file a new bug, but I don't think there is enough information to relate your problem to a specific cause. As you can imagine, most people are not tormented by script errors. We're trying to track it down to something about your system or your customization of Firefox.
Could you try creating a blank new Firefox settings folder (AKA a Firefox profile)? In addition to bypassing current add-ons and custom settings, it should have completely fresh settings databases and a fresh cache folder.
Close Firefox and start up in the Profile Manager by entering the following in the Search box on the Start menu and pressing Enter:
<br>firefox.exe -p
Your currently active profile is selected. Don't delete anything, just create a new profile and start Firefox in that new profile. Any time you want to switch profiles, close Firefox and return to this dialog. More information on the Profile Manager: [[Managing profiles]].
Do the errors persist in the new profile?

Portal: Disable the SAP tool bar and enable a pop up in SAP IAC iview

Hi Experts,
My requirement:A user will open the ESS->Bank details iview (which uses the standard transaction PZ03) and would like to edit a record. So, he clicks on the change button and a screen to edit the record comes up. Here, he edits information as required and now decides not to save these changes. Then the user clicks on the back button and a pop up dialog box appears which asks the user if he would like to proceed without saving the changes. Once he clicks on OK, he is taken back to the previous screen. Also, in the iview, the SAP tool bar must be invisible.
I can achieve the dialog pop up to appear using these ITS parameters:
~popups = 1
~generateddynpro = 1
In this case, the SAP menu tool bar is very much visible.
If I give the ITS service parameters as
~webgui = 1
~webgui_simple_toolbar = 1
~popups = 1
~webgui_popups = 1
Here, I'm able to disable the SAP tool bar but my pop up dialog box does not appear.When I click on back button, I continue to remain on the same screen instead of the pop up dialog box getting opened.
If I give both ~webgui and ~generated dynpro together, it's not helping either.I cant see the pop up again, but able to disable the tool bar.
Need some inputs to fix this issue.
We are on EP 7.0, ECC 6.0 and ESS/MSS 50.4
Thanks,
M.Maneesha

Please keep following parameters in the ITS services and your problem will be resolved.
Make sure you remove all parameters other than below.
~AUTOSCROLL     0
~GENERATEDYNPRO     1
~LANGUAGE
~LISTSCROLLING     0
~LOGIN
~PASSWORD
~POPUPS     1
~STYLE     DHTML
~TRANSACTION     PZ03
~WEBTRANSACTIONTYPE     EWT
Edited by: Barin Desai on May 11, 2010 6:45 PM

Uploading and script error

Hi, I was trying to upload a file using fileReference, but
the error comes when it's a big file saying:
The script is causing flash to run slowly. Just wondering if
there is a timeout defined in fileReference or how can I increase
it.
thanks.

Hi Venkatesh,
I am testing SU01 t.code using ECATT.I have used TCD recording.I create script and test the script.I have complted parameterisation.When i'm trying to test the file it shows the follwing log In ecatt.
No batch input data for screen SAPLSUU5 0100*
The file have diffrent userids emails firstname lastname.
how i resolve the error.Pls help on this.I always got same error in diff T.codes also.
Thanks
Ravi

SAP NetWeaver Gateway and JSON Error Handling

Hello All,
I am developing a small test application using Netweaver Gateway to understand the error handling. I am using Postman to test the Gateway service. I have developed small RFC FM to read return list of deliveries for a shipment. The RFC reads in a shipment number and returns the list of deliveries. The RFC also has Return parameter of type BAPIRET2 that stores the error message if shipment is not found. We want to use only JSON format for the application. So, I have set the 'Accept' parameter at request header to 'content/json'. I am also aware of the exception /IWBEP/CX_MGW_BUSI_EXCEPTION that allows to throw an error message from backend suite. I have that by having a Return parameter of type BAPIRET2, the generated method automatically handles the error message and sets the correct HTTP status.
Now the Problem:
As mentioned earlier, we want to use JSON format. When I set the header parameter or specify $format=json in the URI the HTTP status code is always set to 500 when there is an error. The error message about invalid shipment also is not returned.
When I remove the JSON format parameters, the XML format is returned and HTTP status is set to 400 with appropriate error message.
How can we get the Gateway to set the HTTP status code to 400 along with error message in the event of an error in RFC. I have tried with the exception /IWBEP/CX_MGW_BUSI_EXCEPTION and BAPIRET2 return parameter but still does not work. Is this a known issue in Gateway/JSON?
Please see attached screenshots.
Thanks,
Rutul Thakkar

Anyone have encountered this issue? Any suggestions?
Thanks,
Rutul Thakkar

Session variable and script error

Hello;
I am still writting this script that turns a bg sound on and
aff for the whole site to remember. I have a good start on this
code, but I am running into issues.
1. I am trying to use a checkbox to make the selection, and
when it is clicked, it will function without using a submit button,
the java script I am using isn't doing the job allowing the
checkbox to act as a link so to speak.
2. I need to make this script into a session variable. So
that when the decision is made, the site will remember it.
3. there might be a problem in my IF statement.
Can someone please help me out? I am attaching the code. It
is using a DB that has a yes/no box in the table this sound code is
accessing.
Thank you.
Phoenix

A Quess...
Remove the OnClick in the form
<form onClick="category.submit();">
Place it in the input type?
<input type="checkbox"
onClick="category.submit();">

When to create SAP IAC i-view and SAP transaction i-view

Hi Gurus,
Could you please tell me when to create SAP IAC iview and when to create SAP transaction i-view.
Regards
Indranil

Indranil,
check this from one of the threads
Transaction iViews as the name suggests point to SAP transactions. These iViews can be presented in three flavors out of portal - Win,Web and Java GUI. All have their different advantages. One rule of thumb I have been followins is that if the SAP transaction has a lot of user input go with WinGui (talk to users who use these transactions the most and find out what GUI would make them more happy)
WebGui is pretty good in scenarios where the transaction is going to be mostly getting the information a some little interaction. Haven't had a chance to try Java GUI.
Now about IAC or internet application component iviews. These iviews mostly point to services based on ITS i.e. web applications which are served thru ITS. How are they different from SAP transactions served thru webgui is that these have more web like look and feel. A good exampple of this kind of application is Shopping Cart in the Enterprise Buyer Professional. The web like look and feel is given by the service files in ITS.
some questions
1. Is one preferable to the other?
ans: Please read above
2. Is there a corresponding IAC for every SAP Transaction?
ans :No
3. Can either use WebGui or WinGui mode?
ANS: IACs don't have wingui mode.
4. Why do IAC Services need to be "activated"?
ANS: Otherwise they won't be published to ITS and you cannot access them.
Thanks
Bala Duvvuri

Iac iview settings

Dear experts,
i m created sap iac iview and in application parameter i give ~transaction=su01 & ~WEBGUI_SIMPLE_TOOLBAR=160 and hide back and exit button from the transaction but when i again press the enter it again shows the exit and back option
and my second problem is that what value we pass to ~WEBGUI_SIMPLE_TOOLBAR so that save button comes in the su01
transaction
please help...............

Hi
Pls check the doument . It may help you
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e046cb5c-711a-2a10-95a9-81b365901b95?QuickLink=index&overridelayout=true
Keshari

Error in creating IAC iviews

Dear All,
We are trying to create IAC iviews but getting error.
Environment details:
OS: AIX 5.3
DB Oracle 10.2.0.2(UC)
Application EP7.0 (SPS14)
Backend ECC 6.0 SR3
We followed the below mentioned steps:
01) Created one Internet Service ziactest in se80 with the parameters -
~transaction = tcode and ~generatedynpro = 1
02) Published the 'complete service' to the site INTERNAL.
03) Created one sub element under /sap/bc/gui/sap/its as ziactest
04) Modified the service ziactest as :
- specified "GUI Link" = Yes
- specified following GUI Configuration parameters:
~WEBGUI = 1
~SINGLETRANSACTION = 1
~NOHEADEROKCODE = 1
~TRANSACTION = tcode
~GENERATEDYNPRO = 1
- specifed handler as CL_HTTP_EXT_ITS
05) save & activated the service
When trying to test the service, we are getting a script error "Error on Page": wgu_global_eventhandler is null or not an object and the page displayed - is getting distorted . Also, system is specifying that: "The URL
http://gcbeccd:/sap/public/bc/its/mimes/system/page/menubase.html was not called due to an error."
When tried directly with the above url, the following error is getting displayed:
"The following error text was processed in the system RD3: The theme extracted from PAGE/MENUBASE.HTML has more than 2 characters."
Please note that: The SAP GUI for HTML has been configured and working properly. Also, the SAP note 790727 has been applied to resolve this problem but no result.
Any help in this regard will be highly appriciated.
Thanks & Regards
Sudip

Hello Sudip,
If the webgui service is working then there should be no reason for this to not work. By specifying ~webgui 1 you're actually not using any template you've created for the ziactest service. The URL should be:
http://gcbeccd:/sap/bc/gui/sap/its/ziactest
Please also try:
http://gcbeccd:/sap/bc/gui/sap/its/webgui?~transaction=tcode
Please also publish the IAC, WEBGUI and SYSTEM Internet Services from SE80 to the Internal ITS.
You should look at the developer trace (dev_w#) for the Dialog Workprocess that is used and reporting the error for more information.
Edgar

EP IAC iview javascript object required error

Hi,
We have installed EP 6.0 SR1 and ITS 6.20 with service pack 19(with hotfix) in one domain. We have created IAC iviews in Enterprise portal. We are accessing the enterprise portal from different domain and we are getting javascript error <i>object required</i> sometimes. This error comes while loading the IAC iview and it comes randomly. But when we access the portal from the domain where we installed the portal & ITS we are not getting this javascript error.
Did anyone encountered this type of error before???.
Please help..
Regards
Vasu

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

IAC view and BSP iviews gives pop up for user id and password

Hello All,
I am facing a problem in quality portal.
we have SSO configuration between Portal and ECC system and the Jco connection using SSO with login tickets are working fine,test and ping both are succesfull.
The ESS and MSS webdynpro application are also working fine.
But the IAC iviews and BSP iviews says "session managment will not work ! Please check the DMS log files for details" and then ask for user id and password of the ECC system,But the system alias that i am using,is configured for SSO with logon tickets.
same iviews are working fine in devlopment system with system alias with SSO Login tickets but in qa it is asking for id and password ...
I have checked all the system properties also FQDN of ECC system is also maintained.
Please suggest what could be the issue ??
Thank you,
Regards,
Gunja

Hi,
When messages about Session management popup then it is 99% an FQDN issue, but you say you already checked it.
Did you also checked the parameters:
- ITS Host Name
- Web AS Host Name
... in your system object?
Cheers,
B.

SAP IAC Iview and script error

Similar Messages

Maybe you are looking for