SAP ICH in the SCM system is capable of publishing pages in web application

Experts,
We have one critical requirements where in we have to suggest customer that whether SAP ICH in the SCM system is capable of publishing pages in web application or not.
In detail... in our customer land scape SCM is the central planning tool and there are two type of users, one type of users have direct access to SCM system where they can directly do thier demand planning, the second type of users only have access to the web application called "extranet", from which they want to see the published planning guidelines and based on that they also wants to create the demand planning (from the web application - extranet). My question is whether SAP Inventory Collaboration Hub will do for this requirement? Do we need an Enterprise Portal to facilitate this functionality? Please advice. Very impartant and critical for delivery by tomorrow. Thanks in advance.
Warm Regards,
Krishnan

Hi Krishnan,
From your query I understood that a set of DP users access the system from external location over web.
SAP gives a solution ,using BSP web pages, to expose the SAP screens as its seen through the SAPGui's. They look similar to the standard only difference is it will be embedded in the browser. Unfortunately SAP was recommending this technology, they has plans to retire this technology as the Portal would suffice this requirement. So to answer your query the portal is a viable solution to your requirement.
ICH cannot help you because it does not give the functionality of DP, instead its a application for collaboration between the entities (manufacturer & supplier or customer).

Similar Messages

Office 2013 ODT The operating system is not presently configured to run this application

hi!
We have RDS 2012 R2 setup up and running with session host, connection broker, rd gateway and rd web. AS office 2013 can be deployed using APP-V 5 SP2, we have created .appv pkg using ODT as mentioned in this
guide . It was working fine for 2 days and then suddenly we started to get error popup window saying
"The operating system is not presently configured to run this application" . We are receiving this error on Session host server(win 2k12 r2) which is App-V 5 sp2 client, when we try to open any office 2013 app.
And If check on App-v server which is also a publishing server. In event viewer i see this log entry.
Log Name:      Microsoft-AppV-Server-Publishing/Admin
Source:        Microsoft-AppV-Server-Publishing
Event ID:      215
Level:         Error
Description:
The request URL doesn't contain the query string for the client OS.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Server-Publishing" Guid="{825C7963-9E32-4E3B-B74A-DF2CC3B6822B}" />
    <Execution ProcessID="3092" ThreadID="5176" />
    <Channel>Microsoft-AppV-Server-Publishing/Admin</Channel>
</Event>
SaM

We have the same issue. All other applications seem to work fine.
App-V 5.0 SP1 with hotfix package 2 installed on the App-V Management/Publishing server. We only use Windows Server 2012 RDS instead of R2. On the RDS servers, App-V 5.0 SP2 is installed. We use User Profile Disks and also used the ODT for Office
2013.
I our case it worked for a few hours. We didn't change anything (no updates of other things) other than having a few users try to login with different accounts to test the application. Reinstalling the client doesn't work and we also tried to removed
all AppVClientPackages and then clear the cache from locations like:
%LOCALAPPDATA%\Microsoft\AppV\Client\VFS
%APPDATA%\Microsoft\AppV\Client\VFS
C:\ProgramData\App-V
I'll post a solution if I find one.

I recently upgraded to Lion and my 2004 Microsoft Office no longer functions. So all of my word docs are unreadable with the Lion system. If I buy pages, will they be converted? Also, I used Microsoft Word for editing docs, making comments and tracking

I need help. All of my word docs from Microsoft word 2004 cannot be read in Lion. I can't believe I'll have to pay for a Word upgrade. Is it worth it? Is pages as good? Will all of my docs be recognized once I upgrade to the current word or Pages? I tried Open Office, but that doesn't synch all of the previous Word docs, it needs to be done one doc at a time.

deeners wrote:
It would have been nice to know this before buying a $29 upgrade to Lion. Which now will add a necessary $150 upgrade. Some people may have waited to upgrade to Lion had they known this.
The fact that Lion is unable to run PowerPC only applications is publicized for months.
I'm sure that it's well known in the heart of Amazonian forest
Yvan KOENIG (VALLAURIS, France) mercredi 27 juillet 2011 22:24:14
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Using the Model Facade Pattern in a Java EE 5 Web application

Hi,
Yutaka and I did a Tech tip
http://java.sun.com/mailers/techtips/enterprise/2006/TechTips_Nov06.html#2 on using a model facade pattern in Java EE 5 web-only applications recently. We got some questions about it, and these were some of the questions raised...
Question 1) the first part of the tech tip(it has two articles in it) http://java.sun.com/mailers/techtips/enterprise/2006/TechTips_Nov06.html showed how to access Java Persistence objects directly from a JSF managed bean, is this a good practice?
Question 2) when to use a facade(as mentioned in the second part of tech tip) ?
and maybe
Question 3) why doesn't the platform make this easier and provide the facade for you?
Briefly, I will take a shot at answering these three questions
Answer 1) You can access Java persistence directly from your managed beans, but as your application grows and you start to add more JSF managed beans or other web components(servlets, JSP pages etc) that also directly access Java Persistence objects, you will start to see that you are cutting/pasting similiar code to handle the transactions and to handle the Java Persistence EntityManager and other APIs in many places. So for larger applications, it is a good practice to introduce a model facade to centralize code and encapsulate teh details of the domain model management
Answer 2) IAs mentioned in answer 1, its good to use a model facade when your application starts to grow. For simple cases a spearate model facade class may not be needed and having managed beans do some of the work is a fast way to jumpstart you application development. But a facade can help keep the code clean and easier to maintain as the aplication grows.
Answer 3) First note that both of the articles in the tech tip were about pure web apps(not using any EJBs) and running on the Java EE5 platform. Yes it would be nice if a facility like this was made available for web-only applications(those not using EJBs). But for web-only applications you will need to use a hand-rolled facade as we outlined in the tech tip. The Java EE platform does provide a way to make implementing a facde easier though, and the solution for that is to use a Session Bean. This solution does require that you use ythe EJB container and have a Session Bean facade to access your Java Persistence objects and manage the transactions. The EJB Session Facade can do a lot of the work for you and you dont have to write code to manage the transactions or manage the EntityManager. This solution was not covered in this tech tip article but is covered in the Java BluePrints Solutions Catalog for Perssitence at
https://blueprints.dev.java.net/bpcatalog/ee5/persistence/facade.html in the section "Strategy 2: Using a Session Bean Facade" . Maybe we can cover that in a future tech tip.
Please ask anymore questions about the tech tip topic on this forum and we will try to answer.
hth,
Sean

Hi Sean,
I'm working on an implementation of the Model Facade pattern where you can possibly have many facades designed as services. Each service extends a basic POJO class which I'm calling CRUDService: its short code is provided below for your convenience.
The CRUDService class is meant to generalize CRUD operations regardless of the type of the object being used. So the service can be called as follows, for example:
Job flightAtt = new Job();
SERVICE.create(flightAtt);
Runway r = (Runway) SERVICE.read(Runway.class, 2);
Employee e = (Employee) SERVICE.read(Employee.class, 4);
SERVICE.update(e);
SERVICE.delete(r);SERVICE is a Singleton, the only instance of some service class extending CRUDService. Such a class will always include other methods encapsulating named queries, so the client won't need to know anything about the persistence layer.
Please notice that, in this scenario, DAOs aren't needed anymore as their role is now distributed among CRUDService and its subclasses.
My questions, then:
. Do you see any obvious pitfalls in what I've just described?
. Do you think traditional DAOs should still be used under JPA?
. It seems to me the Model Facade pattern isn't widely used because such a role can be fulfilled by frameworks like Spring... Would you agree?
Thanks so much,
Cristina Belderrain
Sao Paulo, Brazil
public class CRUDService {
    protected static final Logger LOGGER = Logger.
        getLogger(Logger.GLOBAL_LOGGER_NAME);
    protected EntityManager em;
    protected EntityTransaction tx;
    private enum TransactionType { CREATE, UPDATE, DELETE };
    protected CRUDService(String persistenceUnit) {
        em = Persistence.createEntityManagerFactory(persistenceUnit).
            createEntityManager();
        tx = em.getTransaction();
    public boolean create(Object obj) {
        return execTransaction(obj, TransactionType.CREATE);
    public Object read(Class type, Object id) {
        return em.find(type, id);
    public boolean update(Object obj) {
        return execTransaction(obj, TransactionType.UPDATE);
    public boolean delete(Object obj) {
        return execTransaction(obj, TransactionType.DELETE);
    private boolean execTransaction(Object obj, TransactionType txType) {
        try {
            tx.begin();
            if (txType.equals(TransactionType.CREATE))
                em.persist(obj);
            else if (txType.equals(TransactionType.UPDATE))
                em.merge(obj);
            else if (txType.equals(TransactionType.DELETE))
                em.remove(obj);
            tx.commit();
        } finally {
            if (tx.isActive()) {
                LOGGER.severe(txType + " FAILED: ROLLING BACK!");
                tx.rollback();
                return false;
            } else {
                LOGGER.info(txType + " SUCCESSFUL.");
                return true;
}

How do I search and zoom to a text in a PDF document when I call the PDF document (in a shared location) from a web application(written in C#)?

The location is something like this:
\\XXX.XX.com\YY_YY_Docs\images\ZZZ_00001.pdf
and I tried ( http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf)
\\XXX.XX.com\YY_YY_Docs\images\ZZZ_00001.pdf#zoom=800&search=22-55
but it only opens the document in the browser but does not zoom to it or search the text. How do I achieve this?
Assuming not all the users have acrobat reader installed and opening the PDF in a browser with the Adobe reader add-on installed.

Well, you need a PDF viewer – and that would be Adobe Reader.
Those parameters only work for web-served documents, not for local ones.

Can sap tutor player execute in the vista system?

i have installed the sap tutor in the vista system . but when i use the sap tutor player to open .sim files it will be shut down by the system .
how can i solve the problem ? the sap tutor can not be supported to execute in the vista system?
thanks

hi lion
after installing, before executing the SAP tutor, you must follow the steps that mention below, must first in the compatibility tab of the program select compatibility with Windows XP SP2
Windows Explorer --> folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> compatibility tab --> select compatibility mode = Windows XP SP2, save and play your tutors
regards
Rao

Drop Down Boxes not Populating on the SCM business package through EP7

Hi ,
All would greatly appreciate if any of you out there has experinced this problem
We are using the Enterprise Portal which has recently configured using https or SSL. we are using the Business package SCM 5.0.
When we use the SCM system directly and we go to any iViews we have all the drop down boxes work perfectly well . If the user selects the Value help (drop down boxes) they all show the value and then the selected value populates back to main screen. However, using the Enterprise Portal if the User goes to the SCM business Package iView the value help shows up all the value, but the value that is selected does not populate back to main screen.
Now again if we use http as opposed to https we do not have any issue.
Thanks . Any help on this will be greatly appreciated.

I don't have a clue, but figured I might make a suggestion. Did you touch and hold the pick box? Hope that works for ya.

Idoc failed in Bi system "Could not find code page for receiving system".

Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsi

Hello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal

Iview capable of performing reverse proxy for application integration.

Is there a iview in EP capable of reverse proxying a web application. We are attempting to setup
our production landscape. We can of course use apache to reverse proxy applications hidden behind our dmz by punching a bunch of holes through our firewall. This is not something we wish wish to do as it totally circumvents the safety imposed by our firewalls and dmz. Not having this capability causes all sorts of difficulties with application integration, cross domain scripting issues as well as administrative burden by having to maintain, secure and expose these internally hosted applications.
If this functionality does not exist in out of the box EP, does anyone know a third
party that offers this?
Thanks
Cliff Baeseman

Cliff,
I am not sure I understood your question correctly.
EP is an application running on NetWeaver Application Server. This AS has a component called as Web dispatcher which works like a reverse proxy but isn't meant to proxy applications running on a different server other than NetWeaver AS.
Where is your web application deployed?
More info needed.
Regards,
Kiran

Migrating to Sharepoint 2013 from 2010 - Can you use the same URL for the Web Application without affecting the 2010 environment?

Hi,
I am currently trying to migrate our SharePoint 2010 environment to SharePoint 2013. The first thing I'm doing is creating a 2013 development environment to verify that this migration goes smoothly. I'm also doing this so that we will have a testing environment
after the upgrade to 2013 is complete.
So here is my question: I have a 3 tier farm including; 1 app server, 1 wfe, and 1 sql server. I have made a copy of our SharePoint 2010 database and installed that on our sql server 2012 sever (This new environment is on 3 completely separate servers from
our 2010 environment). I have also installed the prereqs and configured SharePoint 2013 on the App server and wfe servers, as well as configuring the necessary service applications (I have created a completely new 2013 database where I will migrate my 2010
database content when I'm ready).
I am now at the point where I need to create a new web application on the 2013 app server, where I will be migrating the copied 2010 database. (Also note that we have a 2010 development site called https://[email protected])
When I go to create a new web application in our 2013 dev environment, can I use the same url (https://[email protected]) to create this web app, or will this screw up our current 2010 dev environment?
I'm new to SharePoint migrations, so I apologize if this is a stupid question.
Thanks in advance for any insight you can share on this!
Boe Barlage

So, what you are recommending is that before I create a web application in my new 2013 environment, I need go into my hosts file on my 2013 app server and alter it to point to my 2013 wfe.
Then after I do that, then I can create my new web application on my 2013 app server with the same url as my 2010 testing environment
(https://[email protected]).
Then after that I should be able to access my new sharepoint 2013 environment at the same URL (https://[email protected])?
I must be missing something.
In your first reply, you told me to alter the host file on my 2010 app server and point it to my 2010
wfe (I guess I thought it probably already is). You also told me to alter the host file on my 2013 app server and point it to my 2013 wfe.
so I am confused on after I do this, what url would I access my 2010 test environment, and what url would
I access my 2013 test environment?
I am fine with having my test environment as a different URL until I am totally ready to roll everything over and kill the 2010 site. But I want to make sure that when I migrate my database, none of the site links are broken.
I also want to make sure that if I proceed this way, I want to be sure that I will be able to modify the URL to what my 2010 environment is (without a lot of headaches) when I am ready to kill the 2010 site.
Thanks again for your help, it's much appreciated!
Boe Barlage

Error reading Web application occurs when starting one server in the cluster

Hi All,
          I have configured two cluster servers in the win 2000. Admin server also win
          2000. One cluster server joins the cluster while other gives following error
          and starts. But it seems that it does not join to the cluster view because
          prevoius server only serves the requests. I have attached the log also.
          <> <101062> <[HTTP synergyserver] Error reading Web application
          "D:\bea\wlserver6.0\.\config\bd2kadmindomain\applications\.wl_temp_do_not_de
          lete_synergyserver\wl_local_comp12863.war">
          java.net.UnknownHostException: java.sun.com
          at java.net.InetAddress.getAllByName0(InetAddress.java:571)
          at java.net.InetAddress.getAllByName0(InetAddress.java:540)
          at java.net.InetAddress.getAllByName(InetAddress.java:533)
          at weblogic.net.http.HttpClient.openServer(HttpClient.java:159)
          at weblogic.net.http.HttpClient.openServer(HttpClient.java:221)
          at weblogic.net.http.HttpClient.<init>(HttpClient.java:85)
          at
          weblogic.net.http.HttpURLConnection.getHttpClient(HttpURLConnection.java:109
          at
          weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:30
          1)
          at java.net.URL.openStream(URL.java:798)
          at
          weblogic.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultRead
          erFactory.java:149)
          at
          weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromExternal
          Entity(DefaultEntityHandler.java:775)
          at
          weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromExternal
          Subset(DefaultEntityHandler.java:570)
          at
          weblogic.apache.xerces.framework.XMLDTDScanner.scanDoctypeDecl(XMLDTDScanner
          .java:1131)
          at
          weblogic.apache.xerces.framework.XMLDocumentScanner.scanDoctypeDecl(XMLDocum
          entScanner.java:2177)
          at
          weblogic.apache.xerces.framework.XMLDocumentScanner.access$0(XMLDocumentScan
          ner.java:2133)
          at
          weblogic.apache.xerces.framework.XMLDocumentScanner$PrologDispatcher.dispatc
          h(XMLDocumentScanner.java:882)
          at
          weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentSca
          nner.java:380)
          at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:900)
          at
          weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
          va:123)
          at
          weblogic.servlet.internal.dd.DescriptorLoader.<init>(DescriptorLoader.java:1
          78)
          at weblogic.servlet.internal.HttpServer.loadWARContext(HttpServer.java:446)
          at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:404)
          at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
          at weblogic.j2ee.Application.addComponent(Application.java:133)
          at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:115)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
          arget.java:327)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
          arget.java:143)
          at
          weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
          76)
          at java.lang.reflect.Method.invoke(Native Method)
          at
          weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
          .java:562)
          at
          weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
          48)
          at
          weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
          nImpl.java:285)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
          at $Proxy40.addWebDeployment(Unknown Source)
          at
          weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
          t(WebServerMBean_CachingStub.java:1012)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
          arget.java:313)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
          Target.java:277)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
          eploymentTarget.java:232)
          at
          weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
          entTarget.java:192)
          at java.lang.reflect.Method.invoke(Native Method)
          at
          weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
          .java:562)
          at
          weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
          48)
          at
          weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
          nImpl.java:285)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
          at $Proxy0.updateDeployments(Unknown Source)
          at
          weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
          ServerMBean_CachingStub.java:2299)
          at
          weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
          icationManager.java:240)
          at
          weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
          r.java:122)
          at java.lang.reflect.Method.invoke(Native Method)
          at
          weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
          .java:562)
          at
          weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
          48)
          at
          weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
          nImpl.java:285)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
          at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
          at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
          at $Proxy9.start(Unknown Source)
          at
          weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
          ApplicationManagerMBean_CachingStub.java:435)
          at weblogic.management.Admin.startApplicationManager(Admin.java:1033)
          at weblogic.management.Admin.finish(Admin.java:493)
          at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:429)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:170)
          at weblogic.Server.main(Server.java:35)
          Each cluster servers domain names are different i.e. not "mydomain". The
          file its complaining is in the specified directory and it has proper
          priviledges.
          If anyone has an idea please respond.
          Thanks
          Nalika
          [synergyserver.log]


You're getting that probably because the WL instance was not shut down properly.
If that's the case, you'll need to remove an ldap lock file (with a .lok extension) in the directory of ldap files (under the server dir) .

Error on hosting the web application

Hi all,
I am developing a web application using servlets and jsp's and has been deploying this application in Tomcat web server. But now suddenly i am facing some problems in starting the web application.
When ever i start the Tomcat web server, the home page of tomcat is arriving and then when i go to any link in that home page, i am getting the following error.
End of the Tag in the run method.
java.sql.SQLEception:unable to connect to any hosts due to exception:java.net.NoRouteToHostException:No Route to host:connect
**BEGIN NESTED EXCEPTION
java.net.NOROUTETOHOSTException
Mesage:No Route to host:connect
** END NESTED EXCEPTION**
this is the error i am getting in the console program and i can't instantiate my web application. Can anyone suggest me a solution for this problem.

I don't see applets mentioned in the supported features nor in the unsupported features so not sure if they are supported you would likely need to contact the operations team to confirm.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How to get the network details in flex4.5 web application

How to get the network details in flex 4.5 web application
similar to the nativeinterface in air application

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

Can you reload web application from the Weblogic console?

          Good day, eh!
          Can you reload all your jsp/servlet classes of your
          web application from the Weblogic console?
          A one big button labeled 'Reload application' would be very
          good property in Weblogic
          Thanks for Your answers
          - hoser


Hi,
          I agree it is a much needed feature. Suppose I just change an init
          param of one application in the web.xml, I don't want to take down the
          15 other webapps running on my server just to be able to have that web
          app restart and re-read is configuration. Of course, I could program
          some servlet that allows changing application attributes and to enable
          restarting, but really this a)does not cover all the cases (i.e. addind
          an EBJ reference binding to web.xml) b) should be provided by the app
          server, not programmed by every little programmer again & again.
          Mathieu
          Jeff Nowakowski wrote:
          >
          > The URL you give refers to redeploying EJBs, not web applications. Being
          > able to redeploy a web application would be a very convenient feature.
          >
          > -Jeff
          >
          > Gene Chuang <[email protected]> wrote in message news:[email protected]...
          > > Button is already there!
          > >
          > > http://www.weblogic.com/docs51/techdeploy/hotdeploy.html#consoledeployejb
          > >
          > > Gene
          > >
          > > "hoser" <[email protected]> wrote in message
          > > news:[email protected]...
          > > >
          > > > Good day, eh!
          > > >
          > > > Can you reload all your jsp/servlet classes of your
          > > > web application from the Weblogic console?
          > > >
          > > > A one big button labeled 'Reload application' would be very
          > > > good property in Weblogic
          > > >
          > > > Thanks for Your answers
          > > >
          > > > - hoser
          > >
          > >

What is the best way of persisting Web-application related data?

My web-application needs to persist some data (a set of XML documents), i.e. save them so that they can survive server or application shutdowns. Saving those documents as files in server's filesystem does not seem to be convinient to me because the container may run the application directly form WAR and it is impossible (maybe I am wrong?) to modify files inside WAR archive. Forcing WAR extraction requires container reconfiguration and is container implementation dependent, which is not acceptable.
What would be ideal is some individual persistent storage bound to an application which does not require any external enitites (external databases etc). And this storage should not depend on any particular implementation of servlet container.
So is there a way to do something like this?

Saving it to disk seems like your only alternative.
Presuming you have at least some control over the machine where it is deployed to, you could specify a directory to save the xml documents to (ie not one under your web application structure) This would get around the limitations of the WAR file not being extracted.
Make the directory an environment variable/init parameter in your web.xml file.
All you need then is a directory on the server that you have write permissions to.
Ok it requires more setup when deploying the web application, but I thinks its about the only way to accomplish what you want to do.

SAP ICH in the SCM system is capable of publishing pages in web application

Similar Messages

Maybe you are looking for