SAP IDOC import from XI

I'm trying to import IDOC from SAP, but i'm getting "login failed (authorization insufficient)" error. But i'm able to login into SAP GUI using the same login info. What authorizations/roles i should have on SAP and XI system for IDOC transfers?
Thanks,
Anika

Hi Anika,
These roles shud be assigned to the user which you use to login to the SAP R/3 system as from this R/3 system you are trying to import IDoc into SAP-XI after getting connected.
You may be able to login using the id w/o these roles thru SAP GUI but its not necessary that you have authorization to import the IDoc. Hence you need to add these roles to the user profile.
Cheers
JK

Similar Messages

IDOC Import from R/3 4.6C - login issue

Hi all,
I am having difficulties with IDOC import into the Integration Builder (Design). I have set everything up in SLD and in integration builder but am experiences some strange behaviour on import. I wonder if anyone has any ideas!
So if I go to Imported Objects -> Import Of SAP Objects and then fill out my connection data and logon, I get errors. If I logon as myself (a full admin user on the R/3 system - verified and used many times!) I get the immediate message that: "You are not authorized to logon to the target system (error code 1)". I know this not to be true as at the very same time I am logged in via front-end. So I tried SAP* and that works, but only to a point, and I receive a different error message. From reading some relevant notes there are specific authorizations/configuration required which could explain why it fails with SAP* (types are not imported) but I don't want to mess with the SAP* or DDIC user and cannot understand why I can't use any other user regardless it seems of what Authorizations I give them. Any ideas what I am missing!
Many thanks,
Chris
My XI system is XI 3.0 SP11 on Win2003/MSSQL
My R/3 system is 4.6C on Win2000/MSSQL

Hi Chris,
First, look at OSS Note : 807895.
Quick solution would be 'Change ALL your password in XI landscape to Upper case'.
Regards,
Peter HyukJin Joh
SAP Korea

Problem IDOC import from Intergration Builder

Hi all,
Please help me with the following problem:
In the Integration Builder (IB) I want to import an IDOC from a SAP R/3 4.6C system.
I've added software component SAP APPL 4.6c to the repository in the IB and changed setting so it is permitted to import RFC and IDOC interfaces.
On the screen 'Connection data for import from a SAP system' I find a group attribute implying load balancing. But we don't have load balancing in our environment.
When I populate the field with a dummy value and start import RFC/IDOC for the component a wizard appears with the tab 'Load Balanced' activated and with tab 'Direct' deactivated.
I think I should use direct connection but I'm not sure how to configure this for the software component.
Please help me!
Best Regards,
Harald Kastelijn

Hi Harald,
Are you using XI2.0 or XI3.0?
It is not necessary to add a software component. What you should do is under your own software component version, enter the host name in message server, and leave the group field blank. When you actually do the import, you will see that you need to enter "application server" information to overwrite the message server info (XI3 only).
Regards,
Hart

IDOC import from CRM 7.0 to SAP PI 7.0 fails: unable to read segments

Hello,
We want to import an Idoc from a CRM 7.0 system to SAP PI 7.0.
The import fails with the message ""unable to read segments".
The issue is related to ALL Idocs, standard and customer defined.
The result of any import is that we can see the object in the import folder, but the structure is missing.
Importing any RFC from the same CRM system is no problem.
Any ideas?
Your help is appreciated.
Regards
Dirk

Hi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

Slow in updating price lists using import from excel

Hello,
I am concerned about the slow process of updating prices in SAP using import from excel. It took me hours to complete the upload for 3700 item rows and 2 price lists. It is also slow in adding warehouses. I am not sure if the account segmentation has something to do with it but it never happened to my other databases where there is no account segmentation. Other than this, SAP is running real fast on the server.
How could this be? Thank you and regards.
Derrick

Yes vijay, There is query params in step 2 of DTW.
2 week before only we have updated to SAP B1 2005B PL41,
but i'm not sure whether DTW is updated to latest version or not ?
Current DTW version is 2005.0.15 & API version is 6.80.320.
What is procedure to update DTW ?
Jeyakanthan

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

How we can import an IDOC structure from one SAP system to another w/o ALE

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samson

hi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful).

How we can import an IDOC structure from one SAP system to another

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
Any response will be awarded!
Thanks a lot.
Samson

hi!
Define the logical system names in both the systems.
Logical system names :SAP001
SAP002
SAP001 FOR 001 CLIENT
SAP002 FOR 002 CLIENT
These two logical system definitions should be present in both the systems.
Assign the logical systems to the client. (in both the systems)
Assign SAP001 to 001 CLIENT
Assign SAP002 to 002 CLIENT
you can See these in transaction SALE.
After this define the rfc DESTINATION IN sm59. (in both the systems)
In 001 client create the RFC destination name SAP002
In the tab log on security, give the user name and password and client of the 002 client and save it.
Similarly do the reverse in the 002 Client.
In 001 client create the port.(Transaction WE21)
Specify the RFC destination name as SAP002.
Now you can define the ports, (both the systems)
Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
partner profile in both the systems.
Now create the distribution model in BD64 and goto edit>model view>distribute.
The same model view will be visible n distributed to the partner system also..which in this case is sap002.
U may trigger the idoc from we19 and chk its status in we05.
Please let me know if you need further info on this.

IDOC settings from sap r/3 to sap pi7.3

Hi Guru,
actual problem when i am triggering the idoc from ERP,it is trigeering to the abap stack in sap pi.but i am using idoc_aae adapter at sender side,the message is flowing from sap ERP to file but the message is seen in sxmb_moni,but actually it is not seen in moni .
Please if any one have the idoc setting from sap erp to sap pi7.3. and iam using ICO configuration.
Please help me
Regards
Reddy

Hi,
Please go through the below link :
http://wiki.sdn.sap.com/wiki/display/XI/ALE-Idocconfiguration-+%28R3XIFile%29
Also in your software component version please check whether import of IDocs and RFCs are allowed
from your respective ECC system, and check the ECC system parameters are correctlt maintained or not.
Try out once.

XI Outbound IDoc different from SAP R/3 Inbound Idoc

Hi,
I am having a problem in processing an IDoc from XI to SAP.
We have created a custom IDoc, which will be populated in XI and then sent through to SAP R/3, which will then process the information in the IDoc.
I have imported the IDoc into XI and have been able to do the mappings and populate the IDoc from the XI side of things. If I check the IDoc adapter, the populated IDoc leaves XI with the correct information and with multiple segments.
If I now go and check the IDoc that has arrived in SAP R/3, it only contains the first segment. The other segments that were populated in the IDoc that left XI are now not there. Also some of the information that was in the IDoc leaving XI is different to the information in the IDoc that has arrived in XI.
I do not experience the same problem when I populate a standard SAP IDoc.
Has anyone experienced this problem with a custom IDoc before?
Thanks,
Miguel

Hi Vishnu,
This is the XML file coming out of XI:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZOEM01>
- <IDOC BEGIN="">
- <ZOEM SEGMENT="1">
<RCVPRN>TSYSTEM</RCVPRN>
<VTRNR>5500015146</VTRNR>
<BSTDK>20050305</BSTDK>
<LABNK>00038</LABNK>
<IDNKD>FHA5930-A</IDNKD>
<VRKME>EA</VRKME>
<KWERK>4601</KWERK>
<DFABL />
<BELNR>80084023</BELNR>
<VEMNG>0000000090</VEMNG>
- <ZOEM1 SEGMENT="2">
<EDATUV>20050305</EDATUV>
<EDATUB>20050305</EDATUB>
<WMENG>000000000000000</WMENG>
<FZABR>0000005270</FZABR>
</ZOEM1>
- <ZOEM1 SEGMENT="3">
<EDATUV>20050307</EDATUV>
<EDATUB>20050307</EDATUB>
<WMENG>000000000000260</WMENG>
<FZABR>0000005530</FZABR>
</ZOEM1>
</ZOEM>
</IDOC>
</ZOEM01>
Thanks very much for your help,
Miguel

Unable to import IDOC metadata from 4.6C based R/3 system

As part of a project we are trying to import IDOC interface definition into XI3.0 from our 4.6C based R/3 System. I have gone through the pre-requisites mentioned at
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
One of the OSS notes 672745 in the above pre-requisites talks about applying basis component patch SAPKB46C46. Our current R/3 System is on the basis patch SAPKB46C39. Is there a way to import just the required function modules without applying the whole patch so that we can
continue with the projet ?
cheers.
Ramesh Babu

There is no SM59 RFC destination involved.
Go to SM59 of the XI box and check, the R/3 system for which XI is having RFC destinations.
And before importing, hope you have given R/3 system IP address, client , user id and Password correctly in the Software componenet version.
Is there a workaround for this?. I remember reading in this forum, that there are other ways of importing IDOC message and interface objects as XSD files directly instead of using import wizard.
>> For this you need to download the Idoc Schema from the R/3 system and then import this schema in the External Definition as a xsd type.
But you need to connect to R/3 system and import the Idoc, Because in the directory, you are going to use Idoc itself as an Message Interface. So the xsd used for changing the occurence of the Idoc type, so that you can post mulitiple idocs.
Hope this helps,
Regards,
Moorthy

Import SAP IDOC in B1

Is it possible to import SAP IDOCS (e.g. ORDERS05) in B1? Is extra software needed?

Hi Johan,
Electronic File Format: the Tools is provided, and used to do most of the file transformations and imports.
It is used for all bank statements (import and export), is used to generate specific reports (Intrastat) and by SAP for specific legal requirements (i.e.the one asked by the French Legals to provide an electronic export on a specific format during controls).
Not the easiest thing to master, but a standard tool for file transformation from Inside the client (B1if will run on the server only, as you know).
sthat you are not restricted regarding the source format (you can even use a .rpt file as a source ).
If you search Inside the SCN, you'll find posts explaining how to use it.
Regards,
Eric

SWCV still contains IDocs/RFCs from an SAP system

Hi
I have imported Idoc to a SWCV. Now am trying to create one more namespace under it. When I try to create another namespace, it automatically selects the check button Import of Idoc and RFC interfaces from SAP systems permitted. If I select not permitted and try to create namespace it gives me this message
Unable to save object XYZ , 1.0 of ABC
Indicator cannot be undone since the software component version still contains IDocs/RFCs from an SAP system
Delete the objects first.
Is it possible for me to create another namespace under a SWCV, to which I have already imported Idoc, by selecting the option " Not permitted ". I want to create another namespace and I don't want to select that option as I have already imported Idoc

Hi,
You no need to touch that check box, you can still create the namespace under software component.
Just double click lick on software component, goto edit mode and click on + symbol to insert namespace and save then activate.
Note:- As you have already imported the RFC and IDoc under your software component(not namspace as you mentioned), you keep that check box import of RFC and IDocs permitted. Dont try to uncheck that.
thanks,
madhu

Idoc lost from SAP R/3 to XI

Hi experts,
I have the following problem:
sometimes an idoc fired from SAP (not through WE19) does not reach XI (I cannot see it in SXI_MONITOR). I've checked the following facts:
1. SAP R/3 status of the idoc is 03 (direction outbound).
2. SM58 produces no result.
3. IDX5 produces no result for that idoc.
4. 99,9% idocs of the same type fired in the same day work fine.
Resending manually the same Idoc using WE19 gives no problem and the idoc reaches XI.
any idea?
Thanks a lot,
Daniele

You must see this in WE05 or BD87. Just release the idoc and have a look at we05 or bd87 and limit down the time where to search. in sm58 you can only see the idoc ith the system can not log on to the remote system. Did you check sm58 in the target system? did you check bd87 in the target system?

Problem with Variable imported from SAP in universe

I am using BO XI R3 with SAP based OLAP Universe.
I am using a BEx query with a variable to create the universe.
While using the variable in WebI report, the prompt comes but it has no effect in the report. I have noticed that if I select any measure object in the WebI query, then the prompt is working fine. But If I select dimension objects only, then the filter doesn't work.
I need to see some dimensions only in the report based on the filter prompt. Is there any specific way to achieve that without selecting a measure object in the WebI query panel ?
I can delete the filter object in the universe and create my own. But why the filter imported from SAP is malfunctioning ?

Let me elaborate the problem.
I am using BEx query (version 7) to build the universe.
In the BEx query, I have one characteristic "Cons Area" in Rows and one key figure "No of Records" in Columns. In the Characteristic Restrictions, I have one variable B_AREA on Cons Area.
In my universe, by default, I have :
1. One dimension object L01 Cons Area for the characteristic Cons Area.
2. One measure object No of Records for the key figure.
3. Two LOVs LovB_AREA and LovB_AREABase as hidden dimension objects.
4. One hidden filter object under class Cons Area for the variable. "Use filter as mandatory in query" checkbox is checked and "Apply on universe" is selected.
The formula of the objects are as below:
L01 Cons Area : [0BCS_AREA].[LEVEL01]
No of Records: [Measures].[D6UXU0FKYVITGHUL4JRNT6XRH]
LovB_AREA : [!V000001].[NAME]
LovB_AREABase : [!V000001].[CAPTION]
Filter :
<OPTIONAL>
 <FILTER KEY="[!V000001]">
 <CONDITION OPERATORCONDITION="Between">
 <CONSTANT TECH_NAME="@Prompt('B_AREA From','A','Cons Area\LovB_AREABase',mono,primary_key)"/>
 <CONSTANT TECH_NAME="@Prompt('B_AREA To','A','Cons Area\LovB_AREABase',mono,primary_key)"/>
 </CONDITION>
 </FILTER>
</OPTIONAL>
Note : LovB_AREABase has a primary key defined on it as [!V000001].[TECH_NAME]
Now when I am building a WebI report using this universe, If I select Cons Area Object only, then the prompt is coming but has no effect on the result. The data is not being restricted by the prompt.
But If I select the measure object along with the dimension object in my WebI report, then the prompt is working fine.
If I delete the filter from universe and build my own filter in WebI query panel, then it is working absolutely fine.
I can create a filter object in universe also as below which will work.
<OPTIONAL>
 <FILTER KEY="[0BCS_AREA].[LEVEL01]">
 <CONDITION OPERATORCONDITION="Between">
 <CONSTANT CAPTION="@Prompt('B_AREA From','A',,mono,free)"/>
 <CONSTANT CAPTION="@Prompt('B_AREA To','A',,mono,free)"/>
 </CONDITION>
 </FILTER>
</OPTIONAL>
But I want to know why the default filter is not working as expected.

SAP IDOC import from XI

Similar Messages

Maybe you are looking for