SAP IDU-IDE
HI
SURELY THERE ISNT ANYTHING CALLED SAP IDU-IDE?
or is it SAP ISE-IDE?
aslo is there anything called workflow in IDE? and is there ayn documentation shwoing how this works ?
Hi,
the correct name is IS-U IDE
where IDE = Intercompany data exchange
But this is old.
Now it is IS-U IDEX (X = extended)
IDEX are add-ons used in the european market for the deregulation
Regards Mario
Similar Messages
-
Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
RajaHi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful. -
Steps to Install SAP R3 IDES 4.7 on Win Server 2003 R2
Hi everyone...
I need your help to install SAP R3 Ides 4.7 on Windows Server 2003 R2...
In this moment, i got this:
DVD SAP R3E 47 SR1 EXPORT 1 TO 16
CD 6.40 Kernel ORACLE A,L,NT,NTIA64
GUI 7.10
SAP NW04 SR1 IGS
Installation Master 6.206.40 Windows Server on IA32 32bit
and Oracle (Oracle 9.2 NT 1 to 3, Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT oracle patch cd)
Firstly, i had to partition my HD in two parts: drive C (65Gb) and drive D(85 Gb), then i configured a Network Loopback and assign an ip (192.100.10.1), then i copied all the package mentioned above in Drive D (85Gb).
after that, i assign the Java paths in Environment Variables.
**I have a cuestion here.... When i gonna install Oracle 9.2NT 1 to 3, ask a location where i wish to install the Oracle software; i pick the Drive D(85Gb) for this... Is this correct or not? --- i always choose drive D for Oracle and SAP.
When i install Oracle, the next step is - - - Install Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT oracle patch cd or this is gonna be installed after SAP R3?
In which order i should to install this package:
DVD SAP R3E 47 SR1 EXPORT 1 TO 16
CD 6.40 Kernel ORACLE A,L,NT,NTIA64
GUI 7.10
SAP NW04 SR1 IGS
Installation Master 6.206.40 Windows Server on IA32 32bit
and Oracle (Oracle 9.2 NT 1 to 3, Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT oracle patch cd)
Please.. somebody help me with this
Best Regards
Santos...HI everyone,
an error appear again!!!
During the DB Instance i get an error in the log file
as "already seems to exist a previous run may not have been finished cleanly and possibly corrupted"
The files are :SAPAPPL1.TSK, SAPAPPL2.TSK and SAPSSEXC.TSK
ERROR 2008-01-19 18:11:16
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPSSEXC.log
ERROR 2008-01-19 18:11:16
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.log
ERROR 2008-01-19 18:11:46
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL2.log
Cheking the logs of each files that appear with error, show the following message:
(TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK possibly corrupted
(TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL2.TSK possibly corrupted
(TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPSSEXC.TSK possibly corrupted
Can anyone please help me?
i will appreciate so much!!!
Best Regards
Alex -
Error installing SAP Web IDE Hybrid App Toolkit Add-on 1.3.2
Hi,
I'm getting an HTTP 404 file not found error when i try to install SAP Web IDE Hybrid App Toolkit Add-on 1.3.2.
Installing "com.sap.mp.cordova.plugins.corelibs" for ios
Installing "com.sap.mp.cordova.plugins.apppreferences" for ios
Installing "com.sap.mp.cordova.plugins.toolbar" for ios
Installing "com.sap.mp.cordova.plugins.logon" for ios
Fetching plugin "com.sap.mp.cordova.plugins.authproxy" via plugin registry
npm http GET http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
npm http 404 http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
Failed to install 'com.sap.mp.cordova.plugins.logon':Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
at Request.emit (events.js:98:17)
at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
at Request.emit (events.js:117:20)
at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
at IncomingMessage.emit (events.js:117:20)
at _stream_readable.js:944:16
at process._tickCallback (node.js:448:13)
Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
at Request.emit (events.js:98:17)
at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
at Request.emit (events.js:117:20)
at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
at IncomingMessage.emit (events.js:117:20)
at _stream_readable.js:944:16
at process._tickCallback (node.js:448:13)
cmd error
The node process of the build script exited with code 1.
When i try to access the file manual i also get a 404:
{"error": "not_found","reason": "document not found"}
I'm installing IOS only on a Mac and all is fine until the error.
is there something I've missed?
Regards,
HenrikHi Henrik,
Which is the version of Cordova and Kapsel you are using?
Your cordova version should be 4.2.0 and Kapsel version should be 3.7.1.
Regards,
Dhani -
Hi all! I am looking for SAP xRPM IDES for self studying. Does anybody know where I can find free access to xRPM?
I have access to ES Workplace, but It seems to me that xRPM is not installed there.Hi Please contact your company's SAP representative or if you have your SID with proper authorizations you will be bale to download and install the same.
regards,
N K -
Error in SAP BI IDES 7.0 Installation
Hi i got error during installation of BI IDES 7.0 in Import ABAP stage.. ( my server is winodws 2003 64 bit )
Error message is :
Not all objects are sucessfully processed. DIAGNOSIS : for details see output file with invalid objects invalid_object.txt and log file object)checker.log. SOLUTION : Normally it indicates the data load error but in some special cases ( for example if some object were created or loded externally ) you can press OK to continue.
then i have checked both log file and it is..
*invalid_objects.log*
checkObjects=
dbType=ORA
strDirs=F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
package object type action status
SAPAPPL1 ?N pkey create
SAPDFACT ?N pkey create
*object_checker.log*
INFO: 2009-01-02 03:09:19
Object Checker is started.
CONFIG: 2009-01-02 03:09:19
Application options:
checkObjects=
dbType=ORA
strDirs=F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
CONFIG: 2009-01-02 03:09:19
List of packages with table structure: 'SAP0000'.
INFO: 2009-01-02 03:09:19
18 packages found in 'F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA' directories.
TRACE: 2009-01-02 03:09:20 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'STXH~TDN' found in STR file for 'SAPAPPL0' package.
TRACE: 2009-01-02 03:09:20 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'DB6CSTRACE~1' found in STR file for 'SAPAPPL1' package.
TRACE: 2009-01-02 03:09:21 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'VARIS~DB6' found in STR file for 'SAPAPPL2' package.
TRACE: 2009-01-02 03:09:22 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DBPROPERTIES' from STR file for 'SAPSDIC' package.
TRACE: 2009-01-02 03:09:22 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DDLOG' from STR file for 'SAPSPROT' package.
ERROR: 2009-01-02 03:09:22
2 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
INFO: 2009-01-02 03:09:22
Object Checker is stopped.
So Any one please help me out.Hi Dear,
First you have to Retry the installation and if you will get same error then you have to check logs SAPSDIC package and invalid_objects.txt in C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS. i have also faced like these errors and if the installation continued after Retry then ok otherwise you have to reinstall the sapinst.
Regards, -
Where to place crossdomain.xml in SAP ECC IDES?
Hi,
I have a flex application which uses webservices generated in SAP IDES system. This flex app is stored in portal server. Since the physical servers are involved, I get a security error message, which says, "Security error accessing url". I browsed through the net and found that, we have to place a crossdomain.xml file in the web root folder of the server from where we are fetching the data. In my case, it would be SAP IDES system.
I wanted to know where do I place this xml file in IDES? What would be it's location and how can I generate a URL to access this xml file?
Please let me know about this, if anyone has done this before.
Appreciate your help.
Thank you,
Warm regards,
DeepakHi Durairaj,
As mentioned in that thread, I created a BSP application in the server and loaded crossdomain.xml. It was accessible from the browser too.
This is the xml code which is there in crossdomain:
<?xml version="1.0" ?>
<cross-domain-policy>
<allow-access-from domain="*" />
<site-control permitted-cross-domain-policies="all" />
<allow-http-request-headers-from domain="*" headers="*" />
</cross-domain-policy>
But this did not solve my purpose
I have my flex application in a server, servera.abc.com and I am using the webservices of another server, serverb.abc.com
I uploaded the crossdomain.xml in serverb.abc.com, in the following path through a BSP application:
http://serverb.abc.com:8000/sap/bc/bsp/sap/zroot/crossdomain.xml
But I still get the 'security accessing url' message in flex. It doesn't load the wsdl.
I'm also using this piece of code in initialize event of the application in flex:
private function initSecurity():void{
Security.allowDomain("*");
Security.loadPolicyFile("http://serverb.abc.com:8000/sap/bc/bsp/sap/zroot/crossdomain.xml");
Alert.show("crossdomain xml loaded....");
Where am I going wrong here? -
Dears,
When I want to activate Funds Management (PSM-FM) in SAP ECC 6 IDES Version, the system is giving me Error no. ZZ003.
How Can I get rid of this message or How can i activate the FM module in IDES version.
Thanks and Regards.,
RKHi all, seems that there are still problems with the attachment so I am writing the steps to follow:
- Se11
- Enter Table Name FMISPS
-> Change
- choose: Utilities -> Table Maintenance Generator
- Choose: Environment u2013> Modification -> Events
- Delete Entry u201EZ_LEAVEu201C
Please let me know if it works
Cheers
Mar -
Please can someone let me know what is the minimum / recommended size of BW IDES server (RAM, CPU and Hard-drive) with HANA. I have checked SAP note on sizing but cannot figure out how do we calculate the size.
I would need size in following cases
a) Assuming nascent state with say just the Business Content of FICO, SD and some other areas installed, say about 100 cubes etc.
b) Size increase for each 100 million records loaded from source. Assume 30 fields each with 10 Bytes.
(I can do 10010^630*10), but should this change (because of column store)
Thanks in advance.
Edited by: Anand Gupta on Jan 27, 2012 10:55 PM
Edited by: Anand Gupta on Jan 27, 2012 11:11 PMFerry, I think the correct note is 1637145 according to which
A cleansed BW system usually has about 60 GB of database tables that will be
stored in row store (data dictionary, housekeeping tables, etc.).
u2022 Average compression factor database table size : row store size = 1.5 : 1
A fixed amount of 40 GB for row store data for BW is assumed.
u2022 HANA uses additional caches to accelerate I/O to persistence layer and for other
purposes. These caches can grow but will shrink if memory is needed to store
data. However, a minimum amount of cache memory of 40 GB has been
identified.
u2022 Additional HANA components (statistics server, name server) require 10 GB of
memory.
u2022 Sum of memory not covered by column store: 90 GB
So I am a bit confused about your conclusions because it clearly speaks in terms of 60GB for dd and housekeeping alone. -
Difference between SAP ECC IDES 6.0 and SAP NetWeaver?
Hello everyone!
I am a bit confused since I am also new to SAP world, so I would to ask you, we have a SAP IDES ECC 6.0 in our server here to our company, I was trying to see a little of SAPUI5 and in a tutorial a guy was using SAP NetWeaver Visual Composer.
1- But, what's the difference between the SAP IDES ECC 6.0 and SAP NetWeaver?
2- What are the other parts I am missing? Are there any other IDES or such a thing around those terms?
3- How can I get installed SAP NetWeaver?
4- I have also got some info about SAP ERP, SAP CRM, SAP MM, SAP BW.. And those?
5- What are they in term of software/patch/ide/plugin/addon... ?
Please, I really need an overview in order to make all the things clear in my mind,
Thank you!
DenisHi Denis,
SAP is a big umbrella where lot of products are developed and made to use in various industry solution like Engineering, Chemical, Retail, Oil & Gas. I used the term Solution to relate SAP application to these solutions.
SAP NW is comprised of following components SAP_BASIS, SAP_ABA, PI_BASIS and SAP_BW. In totality we refer this as NW stack.
SAP application will have underlying database like Oracle, DB2, MSSQL or MaxDB where actual business data is stored.
Please check link Products | SAP to have more insight of SAP products ,services and offerings.
Hope this helps.
Regards,
Deepak Kori -
Viewing standard projects created by SAP on IDES server
Hello,
I am working on IDES server ECC 6.0. cProject suite 4.5. I am not able to see the sample projects created by SAP because of Authorization problem. Is there any way(Admin Role etc..) by which I will be able to see projects created by SAP?
Regards,
Milind DumbreHi Milind,
Are you taking about R/3 or cProject projects?
If it is cProject, if projects are already created and not shown, the mentioned below are few solutions:
1) You nees have this role in portal-SAP_CPR_PROJECT_ADMINISTRATOR along with SAP_CPR_TEMPLATE_ADMINISTRATOR for template projects and also SAP_CPR_USER.
2) Incase the roles mentioned above are already maintained for the user, check the browser you are using, it it is firefox-it is not compatible, if you are using Windows Internet Explorer- may be a cache problem.
3) To resolve the cache problem, go to - SICF t-code--> execute the transaction, in the services field type cprojects and click on filter, system will show you the service, Right click on the service anc click on Test service, enter the login id and password and login to your system.
4) Next by maintaining that, open one more tab in the explorer and mention the URL and login to the portal.
5) Now you can see the projects already created in the dropdown.
Note: Make sure you are noting using the Firefox.
If you need futher clarification revert back.
rgds
Sudhir Reddy. -
SAP ECC IDES EHP4 Installation Error
Dear Friends,
I am installing SAP IDES EHP4 on Windows 2003 64 bit Server and Oracle 10g(10.2.0.4).
The installation is in phase IMPORT-ABAP, it is giving the error as below.
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Loading of 'REPOSRC' import package: ERROR
Loading of 'PCL2' import package: ERROR
Loading of 'DOKCLU' import package: ERROR
Loading of 'SAPAPPL2_2' import package: ERROR
Loading of 'PCL4' import package: ERROR
Loading of 'VRSMODISRC' import package: ERROR
Loading of 'SAPSSEXC_2' import package: ERROR
Loading of 'AGR_HIERT' import package: ERROR
Loading of 'REPOTEXT' import package: ERROR
Loading of 'SOC3' import package: ERROR
Loading of 'SAPAPPL1_10' import package: ERROR
Loading of 'SAPAPPL1_7' import package: ERROR
Loading of 'RSMPTEXTS' import package: ERROR
Loading of 'DD04T' import package: ERROR
Loading of 'SAPCLUST' import package: ERROR
Loading of 'SAPSDIC_1' import package: ERROR
Loading of 'T100' import package: ERROR
Loading of 'SAPAPPL2_3' import package: ERROR
Loading of 'RFBLG' import package: ERROR
Loading of 'SAPNTAB' import package: ERROR
Loading of 'SAPSLEXC' import package: ERROR
Loading of 'VRSX' import package: ERROR
Loading of 'SAPAPPL0_2' import package: ERROR
Loading of 'SAPAPPL1_2' import package: ERROR
Loading of 'SAPSSEXC_3' import package: ERROR
Loading of 'SAPSSRC' import package: ERROR
Loading of 'SAPAPPL1_8' import package: ERROR
Loading of 'E071K' import package: ERROR
Loading of 'SAPAPPL0_3' import package: ERROR
Loading of 'SAPAPPL1_4' import package: ERROR
Loading of 'SAPAPPL1_5' import package: ERROR
Loading of 'SAPAPPL0_6' import package: ERROR
Loading of 'SAPAPPL2_6' import package: ERROR
Loading of 'D021T' import package: ERROR
Loading of 'SEOCOMPODF' import package: ERROR
Loading of 'SAPAPPL0_8' import package: ERROR
Loading of 'STERM_TEXT' import package: ERROR
Loading of 'DD03L' import package: ERROR
Loading of 'ARFCSDATA' import package: ERROR
Loading of 'SAPSDIC_2' import package: ERROR
Loading of 'SAPAPPL1_12' import package: ERROR
Loading of 'SAPAPPL2_7' import package: ERROR
Loading of 'SAPSSEXC_1' import package: ERROR
Loading of 'SAPAPPL2_8' import package: ERROR
Loading of 'SAPAPPL0_4' import package: ERROR
Loading of 'SOTR_TEXT' import package: ERROR
Loading of 'SAPAPPL2_9' import package: ERROR
Loading of 'SAPAPPL1_1' import package: ERROR
Loading of 'SAPAPPL1_3' import package: ERROR
Loading of 'FUNCT' import package: ERROR
Loading of 'ATAB' import package: ERROR
Loading of 'DD02T' import package: ERROR
Loading of 'SAPAPPL2_1' import package: ERROR
Loading of 'E071' import package: ERROR
Loading of 'SAPAPPL2_5' import package: ERROR
Loading of 'SAPAPPL1_11' import package: ERROR
Loading of 'SAPAPPL0_1' import package: ERROR
Loading of 'INDTEXT' import package: ERROR
Loading of 'SEOSUBCOTX' import package: ERROR
Loading of 'SAPAPPL2_4' import package: ERROR
Loading of 'SAPAPPL0_9' import package: ERROR
Loading of 'SAPAPPL1_9' import package: ERROR
Loading of 'SAPAPPL0_5' import package: ERROR
Loading of 'OCSCMPLOBJ' import package: ERROR
Loading of 'GLFUNCA' import package: ERROR
Loading of 'SAPAPPL1_6' import package: ERROR
Loading of 'SAPAPPL0_7' import package: ERROR
Loading of 'USRBF2' import package: ERROR
Loading of 'DDFTX' import package: ERROR
Loading of 'SAPSSEXC_4' import package: ERROR
Loading of 'PPOIX' import package: ERROR
Loading of 'SCPRSVALS' import package: ERROR
Loading of 'SCPRSVALL' import package: ERROR
Loading of 'SEOCOMPOTX' import package: ERROR
Loading of 'DD07T' import package: ERROR
Loading of 'TRDIRT' import package: ERROR
Loading of 'SEOSUBCODF' import package: ERROR
Loading of 'TMENU01T' import package: ERROR
Loading of 'WBCROSSGT' import package: ERROR
Loading of 'TODIR' import package: ERROR
Loading of 'FUPARAREF' import package: ERROR
Loading of 'FAGLFLEXA' import package: ERROR
Loading of 'SCPRVALS' import package: ERROR
Loading of 'DOKHL' import package: ERROR
Loading of 'TADIR' import package: ERROR
Loading of 'DOKIL' import package: ERROR
Loading of 'DSYS_PHFILE_ECD2' import package: ERROR
Regards
Ganesh Datt TiwariHi friends,
now the error is comming as below.
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/ISDFPS/V_BI_TGT")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/ISDFPS/V_BI_TGT" ( "OTYPE" , "TASK" , "LANGU" , "SHORT" , "STEXT" ) AS SELECT T0001."OTYPE", T0001."OBJID", T0001."LANGU", T0001."SHORT", T0001."STEXT" FROM "HRS1000" T0001 WHERE ( T0001."OTYPE" = 'TS' OR T0001."OTYPE" = 'WS' OR T0001."OTYPE" = 'TG' ))
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20111116181302
regards
Ganesh Datt Tiwari -
Download and install SAP ECC IDES Version
Hi,
I want to practice with SAP at customizing and programming level, so I want to install SAP in my computer.
How could I get the installation CDs of an ECC IDES Version?
Thanks.This error may occur if you have a broken download. Please try to re-download and install the trial.
-
SAP ECC6 IDES Activating Funds Managment
Dear Sir,
I have an issue. When i want to activate the Funds Management for the company code 1000 ( AA Derivation and Update control), the system comes up with the message "Read only access" error message no. SV044. This transaction comes up in Display only.
Then how to activate Funds Management for the company code.
Thanks and Regards,
RKHi RK
[https://websmp109.sap-ag.de/support]
See 'Keys&Requests -> SSCR keys'
You should register object R3TR VIEW V_T001_FMACT in your installation number
cheers
Mar -
Hi there,
I am looking for the configuration notes on setting up IDE from a ISU point of view. Also the notes on what is new on IDE.
If there is anything on this I will appreciate emensly from anyone.
thanksHi,
IDE supports the cross-company exchange of settlement data based on international standards , manages data transfer between retailers, distributors, and independent service operators with special regard to the requirements of deregulated markets.
At the communication level events triggers the data exchange process which has the logic for inbound and outbound processes. Data exchange tasks are the result of data exchange process. Communication Event Function Module determines data exchange task data such as Data exchange Basic Process based on the file type, Sender/Receiver service providers, Point of Delivery. Communication Processing Function module is triggered dynamically and is responsible for creation of IDoc format (control and data).
IDE Configuration :
Basic process (client independent) - Define the underlying business process
Data exchange process (client dependent) - Implemented based on basic process per customer
Attach the data exchange process to the service provider.
Hope it helps.
Rgds,
Krishna
Maybe you are looking for
-
hi. i have a quesion please: when i create a mobile me gallery, the size of the image to be viewed is really small. is there a way to adjust the viewing size?
-
After first installation iweb will not start
After first installation iweb will not start Problem message pops up: Die Datei „/Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery" kann nicht geöffnet werden.(can not
-
Moving a Photoshop Elements 3.0 Catalog -- Restore Fails
I have tried to use the back-up / restore-to-new-location method to move a PSE 3.0 (Windows XP) catalog from my hard drive to a mounted network drive (Seagate Black Armor NAS 220). The backup works correctly, but the restore doesn't quite work. The
-
How do I "force" a Nano to mount?
for some reason my Nano isn't mounting - it plays fine & charges when I connect it to the G5, but I haven't been able to get it to mount. any suggestions? w
-
After I query a record from the personnel table(region), I then want to see the accesses(another region based on acesses table with a foreign key to personnel.