SAP IIS Proxy being obsoleted for non-NTLM usage

Following a quite challenging support case with SAP I was told by someone involved in SAP IIS Proxy development that SAP IIS Proxy is being obsoleted for non-NTLM usage and that SAP Web Dispatcher will be recommended from now on. SAP IIS Proxy is only required (and recommended) for NTLM usage (eg. Single Sign-On from Windows).
I was also told that a note will be released in the near future describing this change. I thought I would share this piece of information with the SDN community since it can be of value for people in on going implementations.

Hi Samuli,
You can find information about this on:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/69f45201356248830f1e70fdd7178e/frameset.htm
Regards.

Similar Messages

Returned Defective Phone. Shows delivered. My account is being charged for non returned phone.

I have called Verizon over and over again and it seems that your representatives get my story wrong every time. I returned a defective phone to your warehouse in Fort Worth, TX and it was delivered on August 26th 2014. I have called numerous times and provided the tracking info many times and I am still getting messages that a fee has been applied to my account.
I have doneseek some research on the internet and it seems that your company is doing this to many of your customers. If this is not resolved and I am charged for a phone that has been returned, I will seek legal help and contact the news. I refuse to pay $599 for a phone I returned.

My sons phone was defective got a replacement from verizon. Followed directions and was returned to Fort Worth Texas. On November 3 2014 Was sent text on Nov 14 I was going to be charged if not returned. Called they began a "ticket" to rectify the situation. Today 12/27 spent over 3 hours. Listening to someone tell me no mind you this is the third supervisor. It is not Verizon's fault or responsibility until the phone is checked in. And a refund can not be issued until it is. We have begun the process AGAIN but that was only a few hours ago what did they expect them
To do. So this has been going on for 2 months. The proper ticket was only issued today. again not their fault. Who's fault is it? This is insane.! $449 is not chump change. Did it ever occur to verizon to change procedure?! How many customers have been fed up and just paid this?!

I am being charged for non purchase of applictions

i have been charged from itunes store even without purchase?

Are they store holding charges (are they small ?), which are quite often made after adding/changing credit card details ? If so then they should disappear within a few days : http://support.apple.com/kb/HT3702
Otherwise have you checked your purchase history on your iTunes account ? - Store > View My Account, then Purchase History

Can I purchase Adobe photoshop cc INDIVIDUAL subscription and use it for commercial purpose? Or is it meant for non-commercial usage only?

If I run a small studio with only 3 people, and purchase photoshop CC with individual subscription, can I use it for my studio? Why I ask this is because CC individual license (single app) is cheaper than a subscription for small/medium sized businesses (single app).
Thanks in advance.

Hi rohit.c
Yes, that's fine - there is no restriction on using an individual subscription commercially.
The small business teams plans are more expensive as you get additional storage and tools to manage license deployment.
Kind regards
Bev

Subcontract PO/PR does not generate PR for non stock component

Hello,
I need help on above topic.
SAP Version is ERP Central Component 5.0.
My problem is that PR is not being generated for non stock component in PR/PO of higher/parent material.
I notice that in component overview screen the item cat for this non stk comp. has changed to T( text item) even though the BOm has been maintained with item cat as N( non stock). The material type being used for non stk material is custom developed(copy of NLAG).
Has anyone faced similar issue. or can suggest some missing customization (if any)
Just to confirm :
I have done customising for Direct procurement in OPPQ to trigger PR in requirements planning. Also tried with prod order creation option(though my case is PO creation)
Any help from forum is highly appreciated.
Thanks,
Ram

Hi ,
Commitement check is taking place due to availability control. If u dont want to carry out AVAC for PR then in Tolerance limit put the exclude the check for PR.
SPRO > PS > Budget > define tolerence limit > here u might selected ++ i.e. for all activity type. U select indidula transaction grp excluding PR.
Rgds

Service desk for non-sap (please - any inputs are welcome)

hi all,,
I know how to setup service desk for SAP use. Can some one provide me some tips on using solution manager - service desk for non-sap as well? eg: the company wants to use service desk for normal activities as well, as laptop not working, server down, other system issues etc.
The questions I have are -
1) Any specific structure to be created for the non-sap? The way we use in SAP specific environment is to use "SAP Components" while creating tickets. How can we create tickets for non-sap components? What will be the "responsibility" selection?
2) How about the Ibase? For SAP, the ibase already have the data from SMSY. How can I get data for non-sap systems? Anything is SAP to keep the Asset management data (like entries of laptops, servers etc)
Thanks for all the suggestions !!
JZKALH

Hi
You need to go for service desk XT which is the extension of service desk to manage non sap or IT incidents
Check below link
https://websmp110.sap-ag.de/_solutionmanager
Heterogeous system environments are a challenge for IT-service management in any company. The associated complex structures and varying forms of media often make it difficult to realize efficient service processes. With SAP Solution Manager Service Desk - Extended Usage (Service Desk XT), SAP offers a centralized support tool as a single point of access - for service requests and problem tickets related to SAP and non-SAP software.
The Single Point of Access for Support
SAP Solution Manager, which is a standard part of every SAP solution and therefore can be used by all SAP customers, supports users in SAP relevant service requests. The standard function of the service desk is restricted to service requests.
With Service Desk XT, SAP provides an extended support tool, which can be also used for general service requests, for example regarding IT or telecommunication equipment.
This priced add-on does not require additional interfaces to third-party products - the same service requests are used for SAP and non-SAP applications. This simplification is a benefit for your employees.
This solution has been created with IT service providers in mind, especially those which work within a company and currently do not have an IT-service desk application in place or would like to replace an existing system.
Also,
check this link
pg(46)
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000147532009E
Pg 52 onwards
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000059742008E
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000548652007E
Hope it helps
Regards
Prakhar

"SSO" for non-sap web application using SAPGUI to browse?

I have a web application (non SAP) and the user base are also SAP users in an ABAP system.
To strengthen the authentication in the web app, I wanted to implement SSO
authentication as we pity the users for having to remember so many strong pw's and I
dont like LDAP based pw sync or other technology I dont understand, because then we are
just yet another application with the same pw...
We are having technical problems implementing SSO on the web app side, and are anyway a
bit sceptical about the user admin / role admin assignment if we get it to work.
So I have created a transaction in SAP which browses the web app and the intention is to
send the SAP sy-uname as the web app user. We can control this using s_tcode, and
an own auth object on the WAS side and a check on the session type before the connection is
established. In this sense we are dependent on the SAP concept implemented, but even so:
The role assignment is controlled in the web app itself -> so assume that I am not overly
worried about unauthorized access to the web application, as they would not have any
system role for it as their sy-uname does not exist. (Infact we can monitor this)
The browser on the front end is the SAPGUI with html controls on the SAP side.
I would be interested in knowing whether anyone else has experience with this approach, and
whether there are any areas to be carefull of?
I would also like to know whether this is a strategic error?
Kind regards,
Julius

Hi Julius,
well, if that web application would run on the same ABAP backend system then the solution described in <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0612670">SAP Note 612670</a> would be applicable:
a so-called "Re-entrance ticket" (based on the "SAP logon ticket" SSO proceedings) is issued, transported via the SAPGUI connection and back to the system via the invoked HTML control.
But for non-SAP web applications that does not help.
In that case only X.509 client certificates can be used for SSO. Actually, the web application could then also be invoked directly (independent from the SAPGUI session). The user is authenticated based on the X.509 client certificate - and not based on the ABAP userID (of the SAPGUI session).
Well, if you don't mind the effort you could also use the "SAP Logon Ticket evaluation library" (sapssoext, see <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0304450">SAP Note 304450</a>) to evalute the SAP logon ticket externally. You'll then need to have a "stub application" at the ABAP side that triggers the http redirect to your external web application. Not a nice solution but a possible one.
In the future SAML browser artifacts would be an option (preferable to integrate non-SAP applications). But currently that's not available (for NWAS ABAP).
Cheers, Wolfgang

SSO FOR NON SAP APPLICATIONS

SSO for non sap applications in EP on which siteminder sso is integrated
Posted: Aug 28, 2006 7:09 AM Reply E-mail this post
Hi ,
we have implemented Siteminder on SAP PORTAL 6 SP16 for authentication.I would like to integrate non sap application in Portal.I could not find any documentaion for setting up non sap application's in portal on which siteminder external authentication is implemented.
can anybody help for getting step by step document.
diff rewards to be given

Hi,
if you have access to service.sap.com via S-User, you can download "SAP Enterprise Portal Security Guide" in the portal section. It has dedicated descriptions about SSO-Settings, also about netegrity.
You can also search help.sap.com about "SSO" which gives you overview descriptions.
On SAP Service Net, there is also an pdf "Integrating Security functions" in the Netweaver 2004s Portal section, where the description of the Java API for the PDK is included. This is very helpfull for coding.

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Implementation strategy for non sap sources

hai friends,
could anyone help with the
'implementation strategy for non sap sources'.

Hi,
Its the same as with R3 sources.Only difference is you'll have different underlying interfaces. Non SAP systems can either be flat files, ETL systems or legacy systems using ETL connection, Oracle or Java systems XML, etc.
But your stategy would remain the same only per your non sap source system, the transactions and the ways you configure your datasources would differ.
Cheers,
Kedar

MI Support for Non SAP Backend

hi all,
Theoritically,it is said, MI will support NON-SAP Backends.
But in our <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cc489997-0901-0010-b3a3-c27a7208e20a#q-5-9">FAQs</a> i find the following,
<i>Can I use SAP Exchange Infrastructure for integrating MI with with non-SAP backends?
No, this is currently not supported (see release restriction note 717510).</i>
<b>If we are using SAP Business Connector, can we integrate non-sap Backend?</b>
So, As a consultant, what should our stand be if a client asks if we can integrate Non-SAP backends with MI 2.5?
Regards
Ak.

Hi Arunkumar,
Sorry, I cant make a closed statement that SAP does not support integration of MI with non SAP backend systems. The reason is this is a restriction because of some failed tests & also another reason is we are currently working on taking this restriction out.
So we will surely get back to u with a positive response very soon.
Regards,
Nameeta

What is true business proposition for SAP XI being mandatory for mySAP SRM

Hi,
Would like to know the true business/technical propostion which makes SAP XI the mandatory middleware for mySAP SRM business scenarios
1. Plan-Driven Procurement, and
2. Catalog Content Mangement
Appreciate a reason beyond single vendor/TCO dope we all know...
tnx,
renji

Hi Ranjan,
Solution Manager is not mandatory for SRM 7 implementation.
Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
It is just a guilde. All things might not be required for your project.
We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
Best Wishes,
Tushar.

Why one of my presentations on my ipad2 is being updated for the past three weeks. Non stop?

I have made several presentations on my keynote. But one one them is being updated for the past three weeks or more. Cn some tell me why? How can I stop it ?

Welcome to this customer to customer forum.
To enable forum members to help you, could you please read the web page that is shown below, which asks you to do a few checks first, and has some helpful hints.
When you have done that, please follow the instructions at the end, and post the results here, so members can offer advice. Thank you.
Speed and disconnections
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

IIS Proxy SAR file needed

Hi all:
   I would like to implement the IIS Proxy SSO solution. Is there anybody can send me the IIS Proxy SAR file ?
   I cannot find it in service.sap.com/patches
   my mail : [email protected]
   I will give you the reward points.
   thanks.

Hi,
To my knowledge IISProxy is not supported/delivered by SAP anymore. See the OSS note 886214 for details. You can use WebDispatcher as reverse proxy and SPNego for SSO authentication. They are supposed to be replacements for what you could do with IISProxy.
So I doubt you will find IIS Proxy inside Service Marketplace. Doesn't mean that you cannot get it anywhere else though.
Regards,
Mike

SAP IIS Proxy being obsoleted for non-NTLM usage

Similar Messages

Maybe you are looking for