"SAP Implememtation using Soultion Manager"

Hi Gurus,
Can anyone help me the steps for SAP HR module Implementation using Solution Manager, we r trained in ECC but our client expects us to implement using SAP Solution Magr, so can anyone guide in details
Thanx in Advance
regds
Pradeep

Pradeep,
Solution Manager is a platform for efficient management of your SAP solutions throughout their complete life cycle. Implementation being a phase of this solution life cycle, solution manager can also be used for that.
Please refer to this link for the details of using Solman for SAP implementations.
http://help.sap.com/saphelp_smehp1/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
Hope this helps you.
Rgds
Manish

Similar Messages

Search & Install SAP Notes using Solution Manager

Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank you

Dear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name                             Seq                   Field Val
URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE              1              http://service.sap.com/notes
Regards,
Shyam.

Order to import data in to SAP MDM using import manager

HI All,
Is this the order to import data in to SAP MDM?
Import look up tables
Import Hierarchy Tables
Import Taxonomy Tables -
Non -Qualifiers
Then import main table----map Qualifers along with Mian table and import...
Can we import entire taxonomy tables (Qualifiers, Non-Qualifers) along with main table after importing look up tables?
Thanks
Rajeev

Hi Rajeev
The sequence mentioned by you is correct for importing data in MDM- flat lookup, hierarchy first followed by Main table.
Can we import entire taxonomy tables (Qualifiers, Non-Qualifers) along with main table after importing look up tables?
I am assuming that you are implying Qualified table here.
Import to qualified tables can be done in 2 ways-
1. Import separately using the unique field for the main table for linkages to the main table records.
2. Import can be clubbed with the main table import itself. In the import map we can use Join functionality to do a lookup based on the unique field for the main table.
For more details on the mechanism please go through the threads below-
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
thanks
Ravi

What SAP tool do you use to manage daily and weekly tasks etc

Hi guys
I'm new to basis and am going through setting up my (and others) daily tasks and would like to know if there is an SAP tool that I can use to manage them.
This way all my tasks can be used by other administrators if I'm away, I can report on tasks completed etc for compliance and I can monitor whether contractors etc are doing their jobs properly.
Thanks
Tyrone

1. If your query is related to daily system administration/monitoring tasks, you can make use of the Central System Administration functionality within SAP Solution Manager, which enable you to schedule the Basis related tasks along with the required frequency.
This is a good functionality.
If any of the tasks is not performed/left open, it generates an open action item icon in the initial dashboard of Solution Manager.
With this, you/ your team can also make a note of the tasks they have performed and finally you can generate report from it.
2. Along with the above said functionality, you can also use the Service Level Reporting functionality which gives an overview of the Service Level performance of the systems.
Hope this helps.
Edited by: Bhaskar on Oct 7, 2010 6:41 AM

Can we use batch management in repetitive manufacturing?

Can we use batch management in repetitive manufacturing?
If not, can we use classification or something else?
or what else options we have.
Thnx!

why not?
http://help.sap.com/saphelp_47x200/helpdata/en/25/283c594f7811d18a150000e816ae6e/frameset.htm

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

How to get the image in docking control in a report using doc management

HI All
My question is that is that i am storing one image using documents in jha2n.
Now I want to get that image in report using Document management.
Pls guide how to proceed as I am new and dont know anything about document management.
Thanks
Pooja

Hi,
Please kindly refer to the online help link below:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm]
And for handling the DMS document, you may check the BAPIs in SAP Note: 504692
Function group: CVBAPI
BAPI_DOCUMENT_GETDETAIL2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_DELETE
For display image in the docking control, pleae kindly refer to the SAP DEMO: RSDEMO_DOCKING_CONTROL
Cheers,

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Issue in configuring EWA using solution manager

Hi
I am configuring the Early watch alert for my ECC system, I am facing couple of issue in it.
Soultion manager version 7 with SP14.
1. not able to see Setup EWA tab in Solution setting under Solution directory
2. I am not able to activate system under CCMS Monitoring of EWA in solution setting under solution directory, it does not give any error.
3. I dont see "Early watch Alert" service option when i try to create service under solution monitoring -> EarlyWatch alert -> create new service session
Also like to know the difference between Early watch alert for solution and EarlyWatch alert. In my one of the solution i can see both option and allowing me to create the same.
Regards,

Hi Rajesh,
Have you setup your Solman system as a master system in the remote ECC system in SDCCN? i am still struggling to understand and get EWA working but i have managed to get EWA report for my ECC test system but not Solman itself.
Have a look in SMSY to see if your systems are in a green box, if they are then monitoring is activated for that system then you should be able to see that system in DSWP when scheduling EWA processing.
Also have a look at OSS Note 1257308 - FAQ: Using EarlyWatch Alert. there is a PDF file which shows how to setup EWA according to best practice.
regards,
Mandeep

Pagefile for SAP Erp2005 and Solution Manager 4.0

Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
Moreno

I agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |----    [PM] |----    [PM]   |Mbyte     |
|---    em/max_size_MB |---    20000 |---   100000   |Mbyte     |
| em/address_space_MB |-----    512 |-----   4096   |Mbyte     |
|---- ztta/roll_first |-------    1 |-------    1   |Byte      |
|---    ztta/roll_area |--- 2000000 |--- 3000000   |Byte      |
| ztta/roll_extension | 2000000000 | 2000000000   |Byte      |
|    abap/heap_area_dia | 2000000000 |           2000000000   |Byte     |
| abap/heap_area_nondia | 2000000000 |           0 |Byte      |
| abap/heap_area_total | 2000000000 |[PM]*1048576   |Byte      |
|-    rdisp/ROLL_MAXFS | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/ROLL_SHM | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/PG_MAXFS |---    32768 |---    32768   |8KB Block |
|-----    rdisp/PG_SHM |
so... that [BE] value is not to be used.

How to monitor BI & PI using Solution Manager 4.0

Hi, we have installed Netweaver 04S SR2 SP11 BI & PI components. We want to use Solution Manager 4.0 to setup monitoring for these 2 systems. Any guide or documentation will be greatly appreciated.
Thanks in advance.
Arshish

Hi Arshish,
To setup monitoring you will first have to include these systems in the system landscape of SAP solution Manager 4.0 in transaction SMSY.
The steps in the order are :
1. Create Server ( Server name ,IP and Fully qulaified Host name)
2.Create Database (Give the database you are using)
3.Then you have to create the system itself. and give the information as required.You will be able to do it when you will go through it.
Then you have to generate the RFC's from solution manager to satellite systems and back.These RFC's have to be trusted.Assign role SAP_S_RFCACL or profile S_RFCACL to the users in SOLMAN as well as satellite system.
Follow these steps and create a Logical component for the system that you have added.
Follow these steps first.More information can be found out on
service.sap.com\solutionmanager
or you can look for the RKT'S on service marketplace.If you need any furthur assistance do reply back.
please award points if found helpful
Best Regards
Amit

SAP Product and Portfolio Management Upgrade(PPM)

HI Everyone, A warm reagrds! W e are planning to upgrade our current SAP Product and Portfolio Management 4.0 to 5.0.While doing the Upgrade analysis I have come across below these questions..Has anyone earlier in this forum have come across
1.What are the side effects of this upgrade on existing system?
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
I have check the service market place and help.sap but at present not getting much info..
Thanks for your time to read.. Please help!1

Hi,
it is an own separate NW AddOn, see SAP Note 1377104 (FAQs - SAP Portfolio and Project Management 5.0).
Kind regards,
Florian

SAP TM and Event Management

Hello all,
I am a student of informations systems and currently I am writing my bachelor-thesis about SAP Transportation Management 7.0 and SAP Event Management 7.0 in view of Supply Chain Event Management focused on a Fulfillment-Process. I have a few questions belongs to the practicability of this process with SAP TM 7.0.
Usually you use SAP APO to implement SCM-Fulfillment-Processes. But instead of using SAP ERP LES it is also possible to use SAP TM for Transportation Management especially for Transportation Planning, Execution and Service Provider Selection (Integration between SAP ERP LES and SAP TM e.g. via IDocs), isn't it?
I have got a few experience in customizing SAP TM and SAP EM for a Transportation Execution (FCL) and Tracking Szenario. For this reason, i want to implement e.g. a partial re-planning of the Transportation Execution in SAP TM if there is a variation between planned and actual data (e.g. because of traffic jam).
I don't want to know, how to implement this in SAP TM, I just want to know, if is it reasonable to implement this and the scenario above with SAP TM? Or is it recommend to use SAP APO only?
Kind regards,
Christian
Edited by: Christian Beining on May 5, 2009 10:35 AM
Edited by: Christian Beining on May 5, 2009 11:09 AM

Hello guys,
currently we are handling some problems with the integration of SAP Event Management and SAP Transportation Management. Both are running on the same system.
The Situation:
I had set up a RFC-Connection between SAP EM and SAP TM. In SAP TM I definied the corresponding settings for EM-Relevance of SRQ. In "Integration with other mySAP.com Components" I defined, the Business Process Types, Application Objects Types and the Event Types.
After creating a SRQ, I got the message, that event tracking for the expected shipment request type is activated. While debbuging I found out, that SAP TM found the corresponding Business Proccess Type and Application Object Type to the Shipment Request Type. SAP TM also found the Event Manager which I defined in "Integration with other mySAP.com Components" --> "Define EM" and got the RFC-Destination.
The Problem is, after creating a SRQ there is no message in the Application Log, like "Event Handler was created successfully". The corresponding tables are empty, too.
Has got anybody an idea? Maybe the configuration of the RFC-Connection is wrong or something else?
If you need more detailed information, let me know.
Thanking you guys in anticipation,
Regards,
Christian.

Project Management using Solution Manager

Hi,
We are trying to use solution Manager for managing our IT projects - specifically for SAP projects.
We browsed through the existing functionalities that are available and are not able to get info on the following:
___Project Admin tab for Roadmaps :_ __ In the transaction RMMAIN, we are able to define the scope of the activities at each phase and assign team members and track the status of the activity / task.
However we do not have the tab for tracking the planned start date / end date and the actual start / end dates. Similar is the case for efforts.
So not sure how to track these?
Integration of Roadmaps and Blueprints : Once we have defined the project and assigned the Roadmap, we have all the activities that need to be tracked. In addition in transaction SOLAR01 / SOLAR02, we can define the scope and configurations which in itself are a kind of sub projects to be embedded withing the Blueprint and realization phases respectively of the main Projetc Plan.
How to link these Blueprint specific plan and the realization related plan to the main project plan created out of the Roadmap chosen and to track them as one single project?
Synchronization wih ms project : I see only the option to download the plan as an mpp file. But is there any option to upload mpp as well so that the project can be tracked using mpp and synchronized with Solution manager at frequent intervals?
Your answers would definitely be helping us a lot and would be greatly appreciated.
thanks in advance.
regards,
suresh velan

Hi Suresh,
Solution Manager is a Project Management tool. But it is not for Project Planning. If you want to do Project Planning also from the SolMan system, then you have to enable cProjects component of SolMan.
Synchronization between your MS Project and cProjects is possible. But synchronization between SolMan's RoadMap/Blueprint and MS Project is not possible.
In RoadMap, you can capture and track the status of all phase-wise activities as to what is their status. Here capturing date details is not possible.
In Blueprint/Configuration you can capture and keep track of the individual object's blueprinting and configuration activities. Here you can capture the planned/actual start/end dates for each object.
As I said earlier, Solution Manager provides lot of Project Management features, but Project Planning is not possible. For that we have to start using cProjects component in SolMan.
Hope it helps.
best regds,
Alagammai.

"SAP Implememtation using Soultion Manager"

Similar Messages

Maybe you are looking for