SAP inbound and outbound delivey in single shipment document

Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

Similar Messages

How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Multiple vendors against single shipment document

Hi All
I am working on a project where more then one mode of transportation are used .
1) I have configured routes and stages and assigned different forwarding agent against every route .
2) I have not maintained any forwarding agent at VT01N header level as i want to bill different forwarding agent against every stages .
3) Different stages with vendor assigned to then is coming In VT01N under STAGES tab.When i am doing VI01 there is no item and the error log message is "Item not created because service agent SP not in reference document".
4) My question is how to bill these different forwarding and handling agents against single shipment document.If i enter forwarding agent at shipment header level then shipment cost is calculated against that vendor only.
Please help me ASAP to get rid of this problem as realization is going to start very soon.
Best Regards
Parveen Thakur
9309460061

Hi,
"Item not created because service agent SP not in reference document".
I think you entered wrong partner function shipment item categories in T_56, for item category detail maintain partner function CR - Forwarding agent
Check that you should set partner function CR for delivery document
Then your delivery document service agent partner function CR should entered,then same will be copy in shipment(help you if one delivery with only one forwarding agent)
Then maintain the different vendors against each stage in VT01N (Do not maintain at header)
Then in VI01 items will appear then at item level tick mark to TRANSFER,then system will create P.O for different stage.
Kapil

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Inbound and outbound Idoc for shipment

Hi all,
I woul need to configure an Idoc type both in outbound and in inbound for a shipment document.
For the outbound process I'm trying to use the Idoc:
message type SHPMNT_TNDR
basic type SHPMNT04
Is it right from your point of view?
I don't know which Idoc type I've to use for the inbound process considering that I've to use it in order to add, on an existing shipment document, the stages distances.
Could someone of you help me!!
Thanks,
A

Hi,
thank you for the previous answer.
Really the inbound Idoc should change an existing shipment document in some field.
I'm trying to build this Idoc type with the WE19 t-code but if I try to elaborate the Idoc I'm not able to process it succesfully (i'll obtain status 51 - message: "Idoc can not be processed without error").
I'm inserting in this Idoc with WE19 the TKNUM (document number), the field E1EDT18-QUALF=CHA (that should be mean change), E1EDT18-PARAM=1 (IDoc fields are only copied if they are empty) and few some other information like the forwarding agent.
Do someone have a suggestion for me in order to create this Idoc, in order to test it and change some fields in my shipment document?
Thanks!!

Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
Johnny

I think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.

Regarding Inbound and outbound interfaces in ABAP HR

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

EMAIL inbound and outbound - Sales pro - urgent

Hello,
Our requirement is to reach out to the customer and also the email recieve, whether is it possible in Sales pro. i have seen in the navigation bar of SALES PRO standard workcenter EMAIL does this allow me to do inbound and outbound mails to the customer.
Is there any SAP help related to this, or any best practice to activiate this functionality.
do we also need to define reciepient address also via config.
Regards
AM

Hi,
http://help.sap.com/saap/sap_bp/bblibrary/Documentation/C4B_CRM701_BB_ConfigGuide_EN_XX.doc.
https://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C20_CRM701_BB_ConfigGuide_EN_XX.doc.
pFA
Regards,
Sumeet

ALE Inbound and Outbound programs

Hi,
Can someone tell me as to how we create the inbound and outbound programs for ALEs??And the cenerio where we use the std FMs and where we use the customs programs for the corresponding action?
Thanks,
Supriya Manik.

Hi,
Go thru this Book : Aravind Nagpal
go thru this links,
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
Idoc's
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm (change pointer)
http://www.erphome.net/pdf/tech/J07.pdf#search=%22ALE%20Change%20pointers%22
http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
Thanks
Sunil

IDOC Inbound and Outbound

Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.

hi,
your question is very broad,
start reading continue from there...
<a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
An example:
inter company invoiceing:
the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
for more data see the links above
good luck

Gl balance inbound and outbound

Hi sap gurus,
We are having legacy systems that should interact with sap.I need to know the following for the GL balances through inbound and outbound
1.How data will flow parallely into sap.what steps i have to follow to do this.
2.what user exits or idocs or interfaces i have to use.
3.how the GL balances data will trigger into sap.
Plz help.This is most urgent for me.
Thanks in advance
Kiranmayi

Hi Vijay,
I am assuming that you are asking about inbound and outbound process.
These process comes under SAP Electronic Data Interchange (EDI)
Outbound process--> When a document is sent from SAP system to any other system (to business partners say bank or vendors).
eg sending a quotation to vendor.
Steps:
1. Application doc is created
2. IDoc is generated
3. IDoc transferred from SAP to the Operating System layer
4. IDoc is converted to EDI standards
5. IDoc transmission to business partners
6. Status report sent to SAP system.
Inbound process is reverse of Outbound process-->When a document is sent from business partner to SAP system.
eg Bank sending account statement.
Steps:
1. EDI transmission received
2. EDI Doc is converted into IDoc
3. IDoc transferred to SAP layer
4. Appication document creation
5. View appliation doc.
ALE (Application Link Enabling) method uses tRFC (Transactional Remote Functional Call) port for communication and refer to same concept mostly.
Hope it helps.

Why do we use inbound and outbound plugs in abap webdynpro?

hi all,
why do we use inbound and outbound plugs in abap webdynpro?
Thanks

Actually we have 2 types of plugs
1.View plugs
2.Window plugs/Interface Plugs
plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
Inbound plug is like event handler/receiver of the outbound plug.
Using window plugs we can call other Web Dynpro applications.for more information check this link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
Thanks
Suman

How to do IDOC debugging for both inbound and outbound

Hi
can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
Regards
Blue

Hi,
Yes, i have checked but did not get any satisfactory answer.
here is the solution:
Inbound:
We19, Give the idoc #,
click on the inbound functional module and select the radio button in the fore ground
check the check box call in debug mode, this will enter in the functional module debugging.
Outbound:
Check BD73, give the idoc # and execute
or
RSNASTED program and set the breakpoint there
is this correct, i have not tested/ checked yet.
Regards
Blue

Defining INBOUND and OUTBOUND

Hi Every One,
I have a very small question.
How do we define INBOUND and OUTBOUND?
I got this doubt, when I read some material, sometimes the directions (INBOUND and OUTBOUND) are told as per application systems which participate in message exchange? Sometimes the directions are told as per the XI integratin server.
Which of the 2 methods stated above is correct?
I hope I am clear in what I wanted to convey.
Bye, tschüs, adeu
-Naveen.

Hi NaveenKumar,
You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure. Depending on the communication parameters defined for a message interface, it can either have the task of sending a request (outbound) or receiving a request (inbound).
An outbound interface sends a request message that is only used to make a communication party aware of data sent, without waiting for a response message. In the case of the latter, we also refer to publishing interfaces.
An inbound interface receives a request message that you reply to with a direct response message or whose data you can process in the system without a response.
I guess i have helped you solve your confusion.
Regards,
abhy

SAP inbound and outbound delivey in single shipment document

Similar Messages

Maybe you are looking for