SAP Integration KIT FOR SAP BO Edge 3.1 Trial

Hi,
The SAP Integration Kit 3.1 for BO Enterprise 3.1 is the same for BO Edge 3.1 Trial or there is a specific for BO Edge?
Because I did the download of BO Edge Trial in the SAP BO area, and install the SAP Integration KIT but the system doesn´t work.
thanks,
Rodrigo

i think that there is a specific Integration Kit for Edge
good luck
Amr

Similar Messages

  • Integration Kit for SAP - Edge or XI?

    Hi guys, I'm a little confused, I know that BOBJ Edge Server components is a XI, capped and intended for smaller installations. The question is, I don't see in the installation components any "Integration Kit for SAP Solutions" specific for EDGE, however I do see "SBOP EDGE BI, VERSION WITH DATA INTEGRATION (FOR SAP ERP)" that includes the Int Kit.
    The question is, what happened if I installed Edge before without the Int Kit for SAP, do I have to uninstall and re-istall? or I can use the Int Kit for SAP for XI?
    Thanks for your help.

    mmmm, actually I had installed by mistake the Integration Kit for SAP for XI, it did let me install, after the fact I realized that I should had used the one that comes with Edge with Data Integration for ERP.
    I did uninstall and re-installed the correct one, however, I also noticed that the SP2 for the Integration Kit says on the title "BOBJ XI 3.1 Integration Kit for SAP Solutions" and not BOBJ Edge. So makes me wonder if there is a real difference.

  • Licence (Integration Kit for SAP )

    Hello,
    I have downloaded the "BusinessObjects XI 3.0 Integration Kit for SAP" from the link https://boc.sdn.sap.com/node/18962 .   I use it with Crystal Report 2008 and it works fine.   Now, I want to buy the licence but someone told me I can't,  I need to buy BO Edge Series or BO Enterprise and I will get Integration Kit for free.
    Could you tell me if I can buy only One Licence of "BusinessObjects XI 3.0 Integration Kit for SAP" and use it with Crystal Report 2008?   If so, could you tell me where and the cost to get it.
    Thanks
    Cris

    Hi,
    you can only receive it in combination with BusinessObjects Edge or BusinessObjects Enterprise
    ingo

  • BO Integration Kit for SAP - Linux

    All,
    we want to schedule and publish by email reports, created with Crystal Reports 2008 on queries in SAP BW 7.0.
    To check the fonctionality we installed Crystal Reports Server 2008 on Linux, Crystal Reports 2008 on Windows. For data access of Crystal Report 2008 to BW we installed the BO Integration Kit for SAP. All software could be downloaded in evaluation versions.
    Now we can upload the reports into the CMC of Crystal Reports Server 2008, but when we execute the report, we get the message "failed to load database information". I suppose it is necessary to install the BO Integration Kit for SAP also on the Server side to have data access to BW. Where can I get the evaluation version of BO Instal-lation Kit for SAP for the OS Suse Linux 10.0. ?
    Thanks,
    Thomas

    Hi,
    Crystal Reports Server does not support the SAP Integration Kit. You need at least the BusinessObjects Edge or BusinessObjects Enterprise system installed.
    You need the server environment and the SAP Integration Kit server components.
    you can see the supported platforms at :
    http://server.sap.com/bosap-support
    Ingo

  • BusinessObjects XI 3.1 Integration Kit for SAP

    Hi,
    Is it possible to replace BusinessObjects XI 3.0 Integration Kit for SAP with BusinessObjects XI 3.1 Integration Kit for SAP in SDN? Otherwise, one requires s-id to download it from SAP Service Marketplace which not everyone has s-id.
    Or, where can I download BusinessObject Edge 3.0 in order to work with BusinessObjects XI 3.0 Integration Kit for SAP?
    It seems now that the free trial offers BusinessObject Edge 3.1 but SDN offers BusinessObjects XI 3.0 Integration Kit for SAP. Unmatched version does not work.
    Thank you.
    Hapizorr

    Hi,
    all the downloads are available on Service Marketplace. would suggest you open a case with Support to get your ID for it.
    ingo

  • Integration kit for SAP installation

    Dear All,
    We have Ecc6 EHP5 server ( only ABAP instance not JAVA) installed also BW by default in same server we just create new client ( 300 as BW client ) from RSA1
    OS is Suse linux 11.
    We installed Business objects EDGE 3.1 in different server which is also Suse Linux 11 server
    and then installed client tools like Xcelsius , Crystal Reports etc in user Laptop which is base on windows xp.
    now we installed Integration kit for SAP in the server where we installed  Business objects EDGE 3.1 ( in Suse linrux machine )
    during installed of integration kit for SAP no input related to BW server because BOBJ connect to BW ( that is why we installed integration kit for SAP) and why we need java connector we don't have JAVA instance, and what to do next
    Regards
    Shahid

    Thanks Ingo Hilgefortfor your reply.
    My queries is
    1.    We have only abap instance , Java instance is mandatory for BOBJ ?
    2.    We installed BOBJ edge 3.1 in Linux server and in same server we installed Integration kit for SAP ( during the installation of   
           integration kit no input related to connected server ( BW server ) how to integrate BOBJ edge 3.1 with BW server) what
           Next ?
    3.   after installation of integration kit and import transport request in BW server ( which in actually act as client in ECC 6 server)
          when we goto http://server:8080/CmcApp  then to Authentication  it shows enterprise and Ldap no SAP authentication I also
          download java connector and place it ..../Tomcat/shared/lib/sapjco.jar ?
    Regards
    Shahid

  • Integration kit for SAP Solutions

    Hi gurus,
    i've encountered a problem with BO XI 3.0 Integration for SAP Solutions.
    I've installed in a virtual machine BO XI Edge series for NON-SAP solutions evaluation copy,when I try to run web InfoView everything working fine. The infoview path is http://<servername>:6405/InfoViewApp and it take itself the "logon.jsp" file.
    Now my goal was connect BO and my BW server. I've downloaded BO Integration kit for SAP solutions 3.1 but installation locked for a WSDL (I have no idea what WSDL is) than i try with 3.0 version.
    I've downloaded JCO jar and dll files (sapjco3-ntamd64-3.0.2) and putted them on the right (i think) path.
    I've installed Integration kit and installation goes fine.
    Now when i try to catch infoview page 404 not found Internet explorer page is show  but CMS is on,intelligent agent too.
    It can be a tomcat problem?
    Can anyone help me?
    thanks in advance!

    Guys you were good!!!every installation things was right!!
    I've the last question about SAP Authentication: when I try to call the SAP auth page i retrieve the follow error:
    HTTP Status 404 - /SAP/jsp/auth/sapsec_logsys.faces
    type Status report
    message /SAP/jsp/auth/sapsec_logsys.faces
    description The requested resource (/SAP/jsp/auth/sapsec_logsys.faces) is not available.
    Apache Tomcat/5.5.20
    I think is a Jco jar error,it's right?
    In the (awesome) ingo blog there is: "put sapjco.jar file into the path C:\program files\...\tomcat55\shared\lib\, but i have not shared folder, than before installation i putted sapjco.jar into C:\program files\...\tomcat55\server\lib\ folder..was wrong?
    thanks a lot guys!

  • License key dissapears after installation of BO Integration Kit for SAP

    Hello,
    I installed BO Edge 3.1 on Suse Linux Enterprise Server 10 (x86_64). After installation I see the license key for 10 named users in CMCand I could add new users.
    Then I installed the BO Integration Kit for SAP. After this installation the license keys are gone. I could not change the new added user and I can not implement the SAP Authentication. The message is "now valid license key for any concurrent user".
    After Deinstallation of BO Integration Kit for SAP with AddOrRemoveProducts.sh the license key is still gone. I am working with permanent license keys from BO.
    Thanks in advance for your help
    Thomas Windischmann

    Hi,
    in the meantime I solved the problem with support from BO. Although I am using the installation software for BO Edge 3.1 and SAP Integration Kit from the same DVD (BOBJ EDGE BI 3.1 Standard Package, #51035489) there is a inconsistency of libkeydecoder.so between BO Edge installation and SAP Kit installation. After installation of SAP Integration Kit you have to replace this lib with the old lib of BO Edge installation.
    Thomas

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

  • New Features of BOE 4.0 integration kit for SAP

    Dear colleagues,
    I am looking for a presentation that shows the new features of SAP BOE XI 4.0 integration kit for SAP (BW), compared to XI 3.1. I have for example read that regarding WebI it will be possible to connect directly to BEx queries without universe. It is correct ?
    I look to several documents on the market place, but there is no clear document about these new features...
    Thanks for your help.
    Regards,
    Thibaud

    no "integration kit" in version 4 - its all nicely embedded into the core product.
    you are correct - webi can direct connect (using BICS) and also can source from an Analysis View (which is an output of either Analysis Services OLAP edition or the Microsoft edition (excel plugin).  you also get a new universe layer (.UNX) which gives you a much better view of your underlying BEx queries/Cubes and allows you to combine with aother data sources.
    lots more info in the product manuals to v4 which are available at...
    http://help.sap.com/businessobject/product_guides/
    (just change the product drop down to "SAP BusinessObjects Business Intelligence Platform"
    some specific info on SAP BW connectivity is here...
    http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_sap_olap_univ_en.pdf
    cheers,
    Jeremy

  • URL to download BO XI 3.1  SP3 Integration kit for SAP Solutions

    HI
    I have Installed BO XI 3.1 SP3 Enterprise in the server.I want to Install BO XI 3.1 SP3 Integration kit for SAP solutions.
    1)I want to know what is the order of Installations i need to install in case of Crystal Reports and Xcelsius,BI,SAP GUI.
    2)Give me  the link to Down load above version Integration Kit.
    3)What are Installations Compulsory before installing BO XI 3.1 SP3 integration kit SAP solutions and give some more brief Idea

    hi,
    You can use this link:https://websmp101.sap-ag.de/bosap-support
    then:
           Software Downloads>BusinessObjects Downloads>Browse the SAP BusinessObjects Portfolio>Installation and Upgrade>SBOP INTGR. FOR SAP-->BOBJ INTGR. FOR SAP XI 3.1
    then you can see it.
    lory

  • Integration Kit for SAP - Open SQL access to tables. List incomplete.

    After we install the BO integration kit for SAP and CR 2008 we were able to connect to SAP and open SAP Data Dictionnary tables (Open SQL access).
    I have a problem however:
    when I display the list of available tables, the is not showing all the tables in the SAP system. I believe it stops at some point.
    I see all tables with low letters or starting with /BIC...
    I have custom tables with names ranging from ZR1 to ZR5.
    Of these I only see tables up to ZR2*.
    My guess is :
    either that the table list displayed is limited to a certain mumber of tables
    or that there are some authorisations issues to be solved to view all tables (but the same SAP User sees all tables in SE11)
    or there is a table related setting in the Data dictionnary that makes some tables visible by CR and other not
    Thanks in advance for any answer.
    Claudio Ciardelli

    correct - it stops at one point because showing you more than 30.000 tables doesn't really help. Right click on your connection (server entry), select the menu options, there is an entry called Table name like. in your case enter Z% and hit F5 for a refresh and you will only get tables shown starting with Z
    Ingo

  • Businessobjects Integration kit  for SAP

    Hi all,
    I am integrating BI with Xcelsius tool. For that I want Businessobjects Integration kit  for SAP in my client machine. I have reffered the following installation guide.
    [BusinessObjects Integration Kit for SAP - Installation and Configuration|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    After selecting  the option Yes, automatically deploy the web application(Step 20), i get one screen for Configuring web application Server. It is asking Sever instance and Service Name.
    What is Server Instance and Service Name? Can you tell any example for Sever instance and Service Name ?
    Help me in this regard.
    Regards,
    Hemalatha J

    Hi Hemalatha,
    You wouldn't necessarily need the Web application to be installed on the client machine, and unless you want the user to access your Business Objects environment using SAP security, you wouldn't necessarily need the Web Application that comes with the SAP Integration Kit.
    I agree that the documentation is not great in explaining what you would need if you want to do what you describe.
    Are you looking to have connected Xcelsius models which use QAaWS over a Universe which is built over SAP BI content (Cube/Query)
    If so, you may find that you only need the data connectivity components of the SAP integration kit.
    Can you further explain what you are trying to do....I may be able to add more assistance.
    Darren

  • BO Integration Kit for SAP Product Trial Product key

    Hi Everyone,
    I have downloaded BO Integration Kit for SAP Product Trial but the product key mentioned on the website does not work..It says "expired"
    Can anyone please tell me where can I get it the current Product key from.
    As of now I don't have service market place id so cannot download the Product Key file from there.
    Regards

    Hi,
    trial keycodes can be downloaded from here:
    http://service.sap.com/licensekeys
    Ingo

  • BusinessObjects Integration Kit for SAP u2013 key for 90 day evaluation version

    Hello,
    I have installed Crystal Reports 2008, a 30-Day evaluation version on my laptop, from here:
    http://www.businessobjects.com/campaigns/forms/downloads/crystal/2008/datasave.asp
    and I would like to connect my reports to the SAP Data Source (SAP ECC 6.0). For this I have downloaded the BusinessObjects Integration Kit for SAP - 90 day Evaluation version and I try to install it on my laptop. Unfortunately during the installation of the Integration Kit I receive a message u201CThe product key code is not valid or has expiredu201D. The Product key code and the Integration Kit itself I have taken from this page:
    http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
    Could you please help me with the installation of this integration kit? What is wrong?

    Hi,
    do you have access to Service Marktplace [http://service.sap.com/support]? You can get the temporary keys for BOBJ under Keys & requests .
    Regards,
    Stratos

Maybe you are looking for