SAP Internet Mail Gateway for MS Exchange 2003 Server

Hi,
Has anybody successfully configured the IMG to work with MS Exchange 2003?
We have our 4.6C currently configured to talk to Exchange 2000 through SXC
Note 594428 - SXC: Exchange 2003 Server is not supported
Solution
R/3 Basis Release 3.1I to 4.6D:
Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
Note 363154 - Internet mail gateway: use other MTA than Sendmail
This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
I have read the documentation
http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
Jasper

hi,
we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
Kindly revert back at the earliest...
Thanks & Regards
Manicks

Similar Messages

Installing certificate for access to exchange 2003 server

My exchange server requires that a certificate be installed to enable remote access. Since the iPhone does not support disk mode like the iPod there appears to be no way to install the certificate. Are there any workarounds?
iPhone Windows XP

Whole migration from Exchange 2003 server to Exchange 2010 server has been done and applied 3rd party SSL certificate on Exchange 2010 servers also.
Hi,
According to your description, everything about exchange 2010 is ready.
Why don't you follow the mail flow as below?
Internet Emails > Ironport > Exchange 2010 (smart host) > Exchange 2003 servers
Please refer to the following article:
Move Internet Mail Flow from Exchange 2003 to Exchange 2010
Configure mail flow by using one of the methods listed below depending on the needs of your organization. This will enable Internet message flow through your Exchange 2010 Hub Transport servers.
Configure Internet Mail Flow Through Exchange Hosted Services or an External SMTP Gateway
Configure Internet Mail Flow Directly Through a Hub Transport Server
Remove the SMTP connector in Exchange 2003 that is used to handle Internet mail. Your account needs to be a member of the local administrators group and a member of a group that has had the Exchange Administrators role applied at the administrative group
level.
In Exchange System Manager, expand the Organization node, expand
Administrative Groups, expand <AdministrativeGroupName>, expand
Routing Groups, expand <RoutingGroupName>, and then select
Connector.
In the right-hand pane, right-click the connector you want to delete and select
Delete.
Click OK to confirm the deletion.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

NO INCOMING POP MAIL from exchange 2003 server.-

My university uses a exchange 2003 server for mail and pop access is enabled on all professor accounts. Since a couple of weeks ago I had no problem at all with my university mail account on apple mail, although I had to use :
incoming mail server: "mail.myuniversity.edu.do"
user: "DOMAIN\username"
Password: "mypassword"
Authentication: Password
After december the 5th I'm not getting any mail at all, even thou the activity monitor says "incoming messages.... 83 of 83" but no message shows up on the inbox. I have noticed that the number keeps growing (84, 85, 86...) but still no message in my inbox.
the weird thing is that I'm able to see my university mail in my iphone using the synced account settings in Itunes. I thought it was a problem of my machine I have made a clean format and reinstall of osX 10.6 with the 10.6.2 combo update. I did not transfered files nor configuration, just copied my documents and reconfigured mail from scratch. I did not imported any message. After all that, the problem persist.
I have used Connection Doctor and everything looks ok. The Detail window shows this:
******************************** BEGIN OF LOG ********************************
CONNECTED Dec 25 20:37:28.201 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
CONNECTED Dec 25 20:37:28.216 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:28.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (SvrMailAdm.rsta.pucmm) ready.
WROTE Dec 25 20:37:28.656 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
USER RSTA\sterlingjimenez
READ Dec 25 20:37:28.682 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
220 mail.pucmm.edu.do Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Fri, 25 Dec 2009 20:38:10 -0400
WROTE Dec 25 20:37:28.695 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
EHLO [10.0.1.33]
READ Dec 25 20:37:29.012 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK
WROTE Dec 25 20:37:29.019 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
PASS ***********
READ Dec 25 20:37:29.030 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
250-mail.pucmm.edu.do Hello [200.88.1.167]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-X-EXPS GSSAPI NTLM LOGIN
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK
WROTE Dec 25 20:37:29.036 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
AUTH LOGIN
READ Dec 25 20:37:29.391 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK User successfully logged on.
WROTE Dec 25 20:37:29.397 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
QUIT
READ Dec 25 20:37:29.436 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 VXNlcm5hbWU6
WROTE Dec 25 20:37:29.447 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
UlNUQVxzdGVybGluZ2ppbWVuZXo=
READ Dec 25 20:37:29.823 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 signing off.
READ Dec 25 20:37:29.927 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 UGFzc3dvcmQ6
WROTE Dec 25 20:37:29.954 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:30.410 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
235 2.7.0 Authentication successful.
WROTE Dec 25 20:37:30.425 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
QUIT
******************************** END OF LOG ********************************
Can Anyone HELP ?
I'm Out of ideas.
Best Regards,
Sterling Jiménez R.

Hello metalcraft,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
http://support.apple.com/kb/TS4363
If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
Best of luck,
Mario

How configure mail.app with webmail, exchange 2003?

Hi,
I would like to configure mail.app with webmail, exchange 2003.
I have certified file of this serverver, and the webmail used https and port 443,listener port.
And webmail address is https://webmail.abc.com/exchange.
How configure mail.app with webmail?
Best regard and I'm pleased to thank you for you kind support in advance.
nautiluzth

For the best Mac compatibility with Exchange, I suggest you use Microsoft Entourage, part of Microsoft Office.

Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

Hi there,
I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
when I open the SMSME it shows running well with no problem..
Any Suggestions???
Thanks

Hi,
Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
a confirmation, thanks for your understanding.
Please run
SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
SBS
2008 & Forefront Protection 2010 for Exchange - SBS Console Error
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Internet mail gateway on iseries

Hello friends,
Someone has a document with the instructions to configurate the internet mail gateway on iseries?
Much thanks in advance,
Best regards,
Marcelo Lopez

Hello Antonio,
You could search "internet mail gateway" in this forum. (go back to All messages, not just the last 90 days)
The following threads should help.
Internet Mail Gateway configuration in AS/400
(contain document by Jim Doll from Perrigo)
Internet mail Gateway
Best regards,
Victor

Trying to recover a mailbox from an old Exchange 2003 server

I still have a 2003 server in my environment but all functions and mailboxes are on Exchange 2010. The only reason the 2003 server is still around is for the off chance of requiring a restoration which has now come up. I have successfully restored a
mail store to a recovery storage group but I am unable to export mailboxes from it using exmerge.
I get the following error:
[10:16:16] Copying data from mailbox 'Jacques Legare' ('LEGARE') on Server 'MAIL-SERVER' to file 'C:\TEMP\LEGARE.PST'.
[10:16:16] Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d)
[10:16:16] Errors encountered. Copy process aborted for mailbox 'Jacques Legare' ('LEGARE').
I have read many, many articles regarding the requirement for “send as” permission. I have granted send as permissions to several different domain accounts and local accounts on the Exchange server but I get the same result with all of them.
It looks like the problem may be because the mailbox no longer exists on the Exchange 2003 server.
So what do I have to do to recover this mailbox? Can I create a mailbox for this user on the 2003 server without messing up his the mailbox on the 2010 server? Instead of restoring to the recovery storage group, should I restore and overwrite the original mailbox
store? Again, will that mess up anything with the 2010 server?

0x8004011d is permission related Error.
Refer to the link below and download EXMERGE guide which has complete procedure documented.
https://gallery.technet.microsoft.com/office/Guide-to-Use-Exmerge-to-fd00af49
If the mailbox that need to be restored has to be extracted from RSG is already moved to Exchange 2010 then you will not be able to run exmerge against it.
You might have to update the attribute MsExchOrigMDB on the RSG to point to Exchange 2010 Database where the mailbox is now located.
even this information is enclosed in the EMERGE Guide.
Revert back for any queries/outcome.
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Exchange 2003 server email

The company I work for uses MS Exchange 2003 Server for its email. iPhone with either iOS 4 or iOS 5 does fine synching with Exchange 2003. I would like to access my work email on my Mac. Microsoft says that the only way to do this is to buy MS Office 2008 Home Business Version, and as far as I can tell, this is correct. Does anybody know of a workaround, perhaps syncing my email from iPhone to Mac. Thanks.

KiltedTim wrote:
My bad. I seem to recall, though setting up mail to talk to our Exchange 2003 server before we migrated over to Exchange 2010 this year. My memory of the timing must be off.
There's always OWA in a pinch.
Not for Exchange 2003 users, /OWA came in with 2007 sp1 and all that, before that it was /exchange. Everyone is dropping support for E2003, even Microsoft (see Outlook 2011), Entourage is actually a good client, different, but better than it looks. You can also use 3rd party connectors, DavMail is a common choice but I found it close to incomprehensible, and then unreliable (especially with contacts)

Creating email address using Microsft exchange 2003 server

Hi. Have a MacBook Pro 2008. I need to add my new company email and we are having trouble creating it on my Macbook Pro. The pepole here only use PCs and they have a Microsoft exchange 2003 server. They are suggesting I buy Microsoft Office for Mac because of Outlook? Is this the only solution or is there another one? Thanks.

I'm not using IMAP. I've tried that before. This time around I'm using the Exchange Account connection. I recall seeing where you could select to delete email from the server with IMAP, but I can't find the same or similar setting in the Exchange settings.

Disable link state updates Exchange 2003 server

Good Day ,
Current Environment: Exchange 2003 SP2 server and one Exchange Front-End Server
What I will have: Two Exchange 2010 servers with DAG
After running the Exchange Pre-Deployment Analyzer I see the message :Before introducing Exchange Server 2010 into this topology, the 'SuppressStateChanges' configuration parameter should be set to '1' on server
server.com. This parameter is essential if you plan to create multiple connectors to the dedicated Exchange 2010 routing group.
So I must do it ?if yes is safe for my exchange 2003
Many Thanks
Regards
e

After doing the Pre_Deployement Analyzer :
Found 1 Active Directory domain(s) containing Exchange servers: companydomaine :
Found 1 Active Directory domain(s) in the forest. :
Found 1 Active Directory site(s) containing Exchange servers: Terminal. :
Found 1 Active Directory site(s) in the forest. :
Found 1 Active Directory tree(s) in the forest. :
Found 1 administrative group(s) in the organization. :
Found 1 DNS domain(s) containing Exchange servers: companydomaine.com. :
Found 1 routing group(s) in the organization. :
Found 148 pre-Exchange 2010 mailboxes in the organization. :
Found 2 Active Directory server(s) running Windows Server 2003 Service Pack 2. :
Found 2 Active Directory server(s) running Windows Server 2008 R2. :
Found 3 server(s) running Exchange Server 2003.
so that I understand I have just one routing group ?
Regards
e

Removing the last Exchange 2003 server from an Exchange 2010 organization

We're in the process of decommissioning our last Exchange 2003 server, I have proceeded through the steps in the Microsoft guide on how to do this and have deleted both the Mailbox and Public Folder stores, removed the RUS policies for Domain and Enterprise.
All mailboxes and public folders are now homed on the new Exchange so nothing resides on the old Exchange 2003 server.
I have today inserted the Exchange 2003 media into the Exch 2003 server and chosen the remove action, but it keeps telling me;
'The component "Microsoft Exchange Messaging and Collaboration Services" cannot be assigned the action "Remove" because: - One or more users currently use a mailbox store on this server.
I checked the server by searching ADUC and also checked this KB article http://support.microsoft.com/kb/279202 and nothing shows up.
I also checked this article on someones blog but no such luck http://smtp25.blogspot.co.uk/2007/04/having-trouble-to-uninstall-exchange.html
However someone made a comment that the used an ADSIedit query (&(objectCategory=user)(msExchHomeServerName=*)) however I am unsure how to do this in ADSI.
Any advice would be gratefully received.
Thanks!

Fantastic post ... thank you so much!
I found three active directory users account using that search which never had a mailbox assigned to them. I removed the exchange attributes from each account and the uninstall proceeded
flawlessly!

Phones cannot connect with mailboxes homed on a remote Exchange 2003 server.

Lost our frontend server and setup new services on an existing Exchange 2003 server.
The now current Frontend server is one of 3 Exchange 2003 servers.
The Frontend server and one more Exchange server are on the same subnet and the 3<sup>rd</sup> is at a remote location.
It is this remotely located Exchange server that users with phone cannot access their mailboxes homed on that server.
This is what is working now.
All remoter Outlook clients can connect via rpc over http to all Exchange 2003 servers
Phones can only connect to mailboxes homed on the Exchanged server located on the same subnet as the Frontend server.
Can you offer any direction?
As a business decision, we are gearing up to put new Exchange 2013 servers into a new forest and migrate the users.
we are now looking at rehome affected users' mailboxes to the exchange server that is accepting the phone connections.
Thank you,
Stephen

Hi Stephen,
In your case, I recommend you move the problematic mailboxes to the Exchange server that is accepting the phone connections for troubleshooting.
About the steps to move Exchange 2003 mailboxes, here is a kb for your reference.
Moving mailboxes in Exchange Server 2003
http://support.microsoft.com/kb/821829
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Decommissioning Exchange 2003 Server

Follow the Exchange Deployment Assistant to the letter and you will not have issues.
http://technet.microsoft.com/en-ca/exdeploy2013/Checklist.aspx
(after the migration it shows you how to decommission it properly.)

Hello All,
My Exchange server setup is in coexistence mode (1 Exchange 2003 server entp and 2 Exchange Severs 2010 DAG is in place)
only 2 mailboxes are left on Exchange 2003 and will be moving them soon.
So I wish to know the what all precautions I should be take and what all action items are there.Recommended link will do
regards
Atul A
This topic first appeared in the Spiceworks Community

Changing the Default OAB from an Exchange 2003 server to an Exchange 2010

I am in the process of decommissioning my old Exchange 2003 servers. All mailboxes have been moved over to Exchange 2010. I already have OABs and Public Folders created on the Exchange 2010 servers. Since I see the "Default Offline Address List",
which is pointing to my old Exchange 2003 server and the Default OAB is set to "True", can I just make an existing Exchange 2010 OAB the "Default OAB"? I have read that I have to perform a move on the "Default Offline Address List"
OAB. Is this required?
thanks
Noe

Configure the Exchange 2010 mailbox databases to use the Exchange 2010 OAB, and leave the Exchange 2003 databases alone. You can delete the old OAB just before taking the Exchange 2003 servers out of production. The "Default" setting
means the OAB is the one that's assigned by default when you create a new mailbox database, so yes, you should set that.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Linux mail gateway for exchange server

hi everybody...
i have a problem that i want run a linux os and install Mail gateway such as kaspersky mail gateway 5.6 for work with exchange server 2010/2013. now i want know about that its possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux
os can work for Microsoft exchange or not??????????
please help me and guide me for this problem

Hi,
From the perspective of Exchange, there is no relevant requirement about gateway. Based on my knowledge, it is possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux os can work for Microsoft Exchange.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

SAP Internet Mail Gateway for MS Exchange 2003 Server

Similar Messages

Maybe you are looking for