SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM  & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error  [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

Similar Messages

  • Opening  the same form more then one time in the same session

    H! I want to accomplish the following .... I have a form that has a button. The code in the when-buttin-pressed trigger is a call_form - to open another form. I want to be able to push this button as many times as the user may want and the form should keep opening a new form. Meaning I can have 10 forms of the second form open if I want. The user basically wants to be able to flip between the data on the same form opening up this form a couple of times in different windows. when I use the call form the button on the initial form is becoming disabled - not allowing me to push it again to open another form without closing the one already open. Please HELP!

    Sounds like you need Run_product rather than Call_form.
    It will establish multiple database sessions, and the user will be responsible for terminating them. And I am not sure, but this may only be possible in client/server forms.

  • It is possible to open the front panel of a subVI more then one time at the same moment?

    I want to open a subvi´s front panel several times with each one operating independently. The subvi has a ring with several variables to choose to show in a graphic. The subvi is called from a button on the Main Front Panel. It is possible to, for instance, open the subvi and set it to show a temperature graphic and click again on the button to call another instance of the same subvi and select pressure for the graphic, keeping both new windows side by side? Will I still be able to access the Main Front Panel?

    Yes you can. You have to use a .vit (VI template file). There's an example here. There's also been lot's of discussion on the subject. I think if you do a search for vit, you'll be able to find additional information and examples.

  • Tag_classifications more then one time in a web app

    Hello everybody, I have a question about the tag classifications. I have a site with a breadcrumb and a titel. I want to have the title of the selected category in the breadcumb and titel. The tag classifications will do the job. But when I place the tag two times in the web app, the second it will show as {tag_classifications}. How can I have a category name more then one time on a web page?

    In case it's useful, I figured out a javascript workaround for this...
    I set the id of the div that has the first instance of {tag_classifications} to "classTag". Then I define a function that gets the contents of that div, puts it in a variable and then prints it out. Lastly, I call that function wherever I need more {tag_classifications} to appear.
    Seems to be working for me. Hope this helps.
    Adrian
    1.  My first instance of the tag goes like this - note the id of the div is set to "classTag"
    <div id="classTag">{tag_classifications}</div>
    2.  I put this javascript function somewhere above where I need the second instance of the classifiactions tag.
    <script type="text/javascript">
    function getClassTag(){
    var myClassTag = document.getElementById("classTag").innerHTML
    document.write (myClassTag);
    </script>
    3.  Where I need the second (or more) {tag_classifications} to appear, I put this instead:
    <script type="text/javascript">getClassTag();</script>

  • Allow for more than ONE item in a single row?

    Allow for more than ONE item in a single row? I can't use this wonderful program unless I can get more than one field on a row (i.e. 1st name, mi, last name etc)

    Thanks for your feedback. This is something we definetely want to provide next year (can't say when yet).
    If others are interested in this feature please vote on it within the idea tab: http://forums.adobe.com/ideas/1046
    That helps us prioritize our work based on customer demand.
    Randy

  • Object would have more then one attribute with the tag :VALUE

    I'm creating a new component in Ultiboard - a 100 pin connector.  This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
    When I change the VALUE or NUMBER attribute, I get the DRC error  message:
    This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
    Please remove one of the attributes and try again.
    Okay, so I've tried deleting the tag and now I can't name the pin at all. 
    What am I missing?

    You should be in the footprint editor to edit the pin name.  Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon.  In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.   
    Tien P.
    National Instruments

  • Can you have more then one iphone control the apple tv at the same time?

    Can you have more then one iphone4 as a remote for one apple tv at the same time?

    iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

  • Configure more then one device at the JMF??

    Hello every body..
    I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
    I hobe that any one can hep me..
    The problem:
    If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
    I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
    If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
    I don't know how i can solve this problem??
    please help me !!
    For reply or any information contact me at my e-mail
    [email protected]

    Thanks for reply sir omcgovern..
    I read what you say but i wondered while this problem from 2003 there is no any solution to this problem??
    Now , what i can do to trick this problem???
    Please if there are any solutions help me as fast as can !!!!!

  • We just received our new mac and took it to the store to have the old files from our last computer transferred over.  Now we can't find all our files.  There was more then one user on the old machine.  How can we find the files from the other users?

    We need to find where the files for the other user on the computer are now located.  There were two other users on the old machine, which was taken into the store and ALL files were suppose to be transferred over to this computer. HELP!

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • Priting more then one page in the layout

    I can't print anymore more then 1 pages per layout of each printed page!
    This happened from leopard. I have upgraded the system, then i did a archive & install trying to solve the problem, but there were no changes.
    I can't print even from new just created users

    Not sure this will help -- But at first I was not able to print more than one page on my EPSON STYLUS PHOTO R200 printer. When the page opened -- I had the Printer listed in the top Title space. After several attempts, i noticed there was a black arrow next to the Printer name -- I clicked on it to open and all of the application features including setting # of copies appeared. I seem to remember reading something that in Leopard 10.5 Printing is now tied to the application rather than the printer. Maybe this had something to do with it not appearing at first.
    Only problem I have now is LEOPARD does not recognize my printer Utility software --for cleaning heads, determining ink levels, etc. I've e-mailed EPSON on this
    Pete Collins

  • App pay more then one time

    im being charg over and over 1$   over and  70 X  ma email is [email protected] thank you this need to be fixed 702-610-0169

    We're not Apple support, silly.  We're users just like you.
    You need to contact iTunes support.  Open up iTunes on your computer, and click the "contact us" on the bottom of the page.

  • When I starting my computer. I get more then one inbox at the bottom screen.

    When starting up my computer. I get multiple in boxes. The icon has five in boxes. How do I fix this?
    Thank you

    Have you just started using Thunderbird, added a mail account and saw several Inbox?
    or
    have you been running thunderbird for a while and then these Inboxes just appeared?
    Are there any emails in any of the Inbox 's?
    Make sure you have View > Folders > All setting and post an image of your Folder Pane into this question, so that I can see what you are seeing.
    Additional:
    Is the mail account IMAP or POP?

  • How can i read more then one channel with the amux64

    Im using AI one scan.
    I tryed the string AM1 ! 0,1 and also AM1 !0:1 but it didnt worked.

    Barak,
    Check the following link, it must solve your issue:
    http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/ef832cdaf87e9bf8862568a5007b2f47?O​penDocument
    Hope this information is helpful
    L Aguila
    Applications Engineer
    National Instruments

  • More then one player playing the same stream

    Hi,
    the problem is when i try to send media stream to a multicast server with class D ip address (224.224.224.24) on port 49150
    it should multicast the stream to the set of receivers on their ip's and ports.
    please suggest me whether multicasting this stream is the job of server (we need to do some networking stuff) or we need to do this by our java code by writing a code that runs on multicast server and transmits the stream to a set of users.
    Note
    in practical
    in my company network i changed my server IP to 224.224.224.24 and tried to run the codes.

    You might try:
    224.112.112.112 22222
    I had a lot of problems getting multicasting working back in the day, but it was because I was using an invalid address.
    :-/

  • Why can't I send text messages to more then one recipients from the UK?

    I have an iPhone 6 with the latest operating system.  I travel to the UK frequently. When I attempt to send a text message to multiple recipients it comes back as undeliverable.  However I am able to send textx to single recipients.  This only happens in the UK That I know of.

    It's ask the person who has that phone - that's where the problem is.

Maybe you are looking for