SAP is connecting for 110 sec.

Hi,
after the update from SBO 2005 to SBO 2007 something strange is going on.
everytime i turn on the SBO 2007, the sap needs exactly 110 sec from the login till the Mainmenue is shown, Everytime!!!!!!
its not the System and the requirements!
do anyone has a idea???
thx
Lukasz

You may check these threads to find any similarities with your issue:
Re: Slow Login into SBO
SAP Business One over WAN connection
Re: My system is very slow.
Thanks,
Gordon

Similar Messages

DHCP Failover, one DHCP Server Partners Supnet is deactivated, Clients losing network connectivity for 3 sec. after renewing they IP Adress

Hello,
currently we are using two W2K12R2 DHCP server configured in "load balance Mode". On DHCP1 the IP-scope with failover partnership to DHCP2 is deactivated. DHCP2 is working fine. Now we register that 50 percent of our clients (W2K8R2 application
server) losing the network connectivity for 3 sec. after rereleasing they IP-Address. On DHCP2 servers eventlog we receive a lot of
BINDING ACK reject events 20291 and 20292 for these IP addresses entries.
These 3 sec. of loosing they Network connectivity is our big Problem because the Client application (W2K8R2 application server) cannot handle these timeout. It looks like a
DISCOVER-OFFER-REQUEST-NAK cycle that are described here:
http://blogs.technet.com/b/teamdhcp/archive/2014/02/26/dhcp-failover-patch-to-address-a-reservation-issue-and-another-issue-related-to-failover-partner-not-accepting-state-transition-from-bad-address-gt-active-has-been-released.aspx#pi47623=2
there is a solution to prevent the 3 sec network failure?
Rgds

Hi Steffen,
Have you applied KB2919355 in the server?
If issue persists, please check the detailed information about the event. It will tell us why does the server send the NAK.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Crystal Reports and SAP BW Connectivity for OLAP

Hello,
Anybody created Crystal reports off SAP BW Infocubes? For some reason I am not able to create or configure BW sever connection. I installed Crystal reports and SAP enhance cd for OLAP.
Thanks
Tom

Hello,
I was able to connect and create Crystal report based on Bex query..no connection problem there. But, reporting directly off infocubes, the server type "SAP Business Information Warehouse"(add server option in OLAP connection Browser) not showing up in list of values.
1. I released Info query for PLE DB for OLAP as per
   user's guide.
2. The manual says you have to configure SAP BW server
   log on? For Bex query(Crystal) all available servers
   automatically available
Thanks

Creation of RFC destination for SAP-Access Connectivity

Hi,
       I want to create a RFC destination for SAP-Access connectivity.
Can I get some help regarding it's connection type,activation type and gateway options required for the same.
Regrads,
Anthony D'souza

Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME          Raj                      Logical name for connection
DBMS                   MSS                   Microsoft SQL Server
USER_NAME        <User name>       For SQL Server
PASSWORD         <password>         " "
CON_ENV             MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO                 Availability type for an open database connect
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Raj

Informatica's connect for SAP R/3

Hi guru's
I want to know what is informatica's connect for SAP R/3 ? I am an informatica developer and could not find any help regarding this in informatica's documentation.
thanks
your help is greatly apperciated.
preeti

Hi,
Informatica has various ETL capabilities.
It can interact with pretty much all databases.
but to interact with SAP .. informatica has 2 special products
Powerconnect for SAP BW.
Powerconnect for SAP R/3.
These enable you to load/ extract data from SAP and also call API's which are exposed by SAP.
A BAPI is like a function module which can be called remotely.
Thanks & Regards
Vandana

Trying to connect my new Apple TV to my Samsung flatscreen TV is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Changed the cable and its working.

Xcelsius connection for SAP NetWeaver BI

Hi All,
We are trying to create a xcelsius dashboard with combination of live office and SAP BI connection. We are using SAP authentication in infoview. My question is regarding SSO.
As I understood that we cannot access this dashboard in Infoview and will have to create a URL objects in infoview for BEx Web Runtime URL and will have to enter login credential again for SAP BW.
Is there a way to create SSO so user does not have to enter login credential. This is the same system which is configured in infoview as default SAP system.
Best Regards,
Chetan

http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinBOE+Infoview

Universe Connections for SAP BEx

Hi All,
We are planning to build couple of Universes over SAP BEx query.
Could anyone inform if we should go for creating a single connection and use it for all Universes (or) Create multiple connections.
Does having different connections for different Universes(though Data Warehouse-BW) is same helps in increasing report performance?
Thank you.
- AK

Hi,
It all depends on your requirement. There are few ways.
You can create one super universe on the top of your BW Query and then create your reports using your super universe.
Or you can create multiple universes and then create your reports.
Basically one universe one connection. SAP Universes are different then other universes where you create one connection.
In SAP environment one universe one connection.
Hope it helps.
Regards,
Bashir Awan

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

SAP BW Roles for CPIC user to use in Univ Connection

Hello All,
I am working on BO XI 3.1 and SAP BW 7.0. At present we are using personal logon credentials in the Universe creation wizard to connect to SAP BW. Instead we would like to create a CPIC user and use that user to connect to SAP BW.
I am wondering what are the roles/authorization this user should assigned.
I greatly appreciate your input.
Thanks

Ingo,
Thanks for the reply. I went the through "SAP Integration Kit Installation" document.
It has details on SAP Single Sign-On and required authentication details. At this moment we are not ready for that.
As I mentioned in the email, we are using the BW developer logon credentials in the Universe Connection Wizard to SAP BW. We would like to get away from that by creating general user in SAP BW specifically for the purpose of BOBJ reporting.
And we just do not want to copy SAP BW developer role to the generic user instead we would like to assign only the required roles. I am not sure what are the minumum roles required for this user.
It would be great if you can share any information related to that.
Thanks

SAP EPM Addin for Excel 10 - SAP BW (INA-Provider) connection

Hello,
We are trying to connect with the EPM Excel Addin 10 on our SAP BW on HANA 7.4 SP7. We are trying to use the SAP BW (INA-Provider) connection as described in documentation. There is a screen where you could choose the SAP GUI connection and you have to fill in the port number and client. We are using HTTP protocoll.
But the connection doesnt work. We are facing the following error message:
Http #2: Unable to connect to the remote server:
There is one special thing in our SAP GUI. We have a router string for the connection. And I think there are some problems with BO tools and such connections.
Does enybody has some expierence with this connection?
Best regards
Nils

Hi,
We have definitely heard your frustration, and Microsoft understands the position our customers are in and we are actively working to find a solution besides a FixIt that can be deployed to remedy the issue.
We can also remove the MS14-082 Microsoft Office Security Updates for December 2014 by temporary bypassing this issue.
If we have any update, I'll post in this forum and you can focus
this blog
============
Update,
Hotfixes for this issue have been released in the March 2015 Updates for Office 2007, 2010 & 2013.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/13/forms-controls-stop-working-after-december-2014-updates-.aspx
Thanks for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAP Plant Connectivity SDK 2.1 for download

u2009Hello. Excellent info.
Please, we cant find SAP Plant Connectivity SDK 2.1 for download. The note 1399331 - Plant Connectivity 2.1, says that we can download from:
https://service.sap.com/swdc ->Downloads -> SAP Installations & Upgrades -> Entry by Application Group -> Composite Application -> SAP Manufacturing Integration and Intelligence -> Plant Connectivity SDK -> Plant Connectivity SDK 2.1 but this path is not correct.
Please, can you help us?
Thanks.
Gustavo Barboza
PROPILCO

Gustavo,
Yes it seems that the note is wrong. I will contact the author and let them know. To find it go to .../sdwc > Search All Categories > copy and paste "Plant Connectivity SDK 2.1" in the field > click the link for Installation product > click the download tab.
That should do the trick
Regards,
Kevin

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

SAP EhP1 SPS6 for NetWeaver 7.0 - tp status 230

While installing SAP EhP1 SPS6 for NetWeaver 7.0 in PBW
(BI production system) the process fails at phase
MAIN_NEWBAS/TABIM_UPG - with tp status 230 and unresolved requests in
buffer.
Anyone has a clue ?
Best regards,
Roger
PHASES.LOG
1 ETQ201 Entering upgrade-phase "TABIM_UPG" ("20110716054322")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '61', GwService = 'sapgw61'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/TABIM_UPG'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TABIMUPG.BUF'
2 ETQ399 Arg[1] = 'TABIMUPG.TPP'
2 ETQ399 Arg[2] = 'TABIMUPG.TP0'
2 ETQ399 Arg[3] = 'TABIMUPG.ELG'
2 ETQ399 Arg[4] = 'XPRASUPG.BUF'
2WETQ399 tp terminated with status 230
4 ETQ380 computing toolpath for request "TP_ACT_ON_NEW_BUFFER"
4 ETQ381 request "TP_ACT_ON_NEW_BUFFER" means "act on the tp buffer,
new format"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SYS"
4 ETQ383 translates to path "/usr/sap/PBW/SYS/exe/run"
2 ETQ399XAnalyze summary error logfile TABIMUPG.ELG and remove all error2 ETQ399Xconditions as described in the upgrade manual
1 ETQ207 Executing post-phase DB specific actions.
4 ETQ010 Date & Time: 20110716054327
SAPehpi.log
CURRENTPHASE MAIN_NEWBAS/TABIM_UPG
...started at 20110716054322
...begin processing at 20110716054322
INFO: Nothing has been done in TABIM_UPG.
..times self: 0.130000/0.060000 usr/sys, children 1.110000/0.000000
usr/sys.
..finished at 20110716054327 with status UNRESOLVED REQUESTS IN BUFFER.
Error message set: 'Unresolved requests in buffer PBW
Check logfiles 'TABIMUPG.ELG'
and '/BWIASP1/usr/sap/PBW/put/EHPI/abap/log/SAPehpi.ECO''
...begin dialogue at 20110716054328

Added *allobj to PBWOFR user profile and repeated the phase with success.

SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth Damodar

Short answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus

SAP is connecting for 110 sec.

Similar Messages

Maybe you are looking for