SAP.IS Package Solutions Consultant
Seeking a Package Solutions Consultant in the Tulsa, OK area for a Long-Term Benefited contract.
Requirements:
BA in CS or IT
Experience with SAP/ERP doing SAP/PRA module configuration
Production, Revenue and Ownership (is a plus but not required)
[email protected]
630-919-2515
Hi Amit,
Do you have any idea about this organization?
They are planning for big IS Cable IMPL and rollouts..
Rdgs,
RV
Similar Messages
-
SAP FICO Package Soution Consultant Role
HI Gurus,
Can anybody tell me roles responibilities of package solutions consultant and related material plz send me to this mail id..
[email protected]
regards
JKHi
Solution manager is used for recording issue logs if any user face issue in production client. This will enable to maintain record of each & every issue log in proper manner.
As regards login into SAP, we require to install SAP GUI & also fill client's system details like Description, System number, Id, Server number, Router (for remote login) in new item in SAP logon pad.
As regards SAP FICO Consultant, the main role is in creation of GL account master data & other configuration activities. All other module integration takes place by specifying GL accounts in their config. For ex: In MM, in OBYC, we specify GL accounts for inventory postings. While configuring SAP FICO Steps, it may so happen, we may forget some steps to configure. These steps can be done if some error comes in end user cycle. -
SAP Certified Solution Consultant Financials - Financial Accounting with SA
Hi
Can any one tell me Pass mark for SAP Certified Solution Consultant Financials - Financial Accounting with SAP ERP 2005
Is there any Partial Marking available?
Thanks in AdvanceHi Nagendra
No partial marking exists in the new pattern now.
You wll have to mark ALL the correct options in order to gain that one full mark for a question.
And yes, pass marks is 55%. You are right.
Let me know if any other query about the certification.
please if your query is solved, close the thread.
Thanks and All the best!!
Regards
Z -
SAP Certified Solution Consultant Supply Chain Managemt - Order Fulfillment
Hi,
I intend to take certification on "SAP Certified Solution Consultant Supply Chain Managemt - Order Fulfillment with SAP ERP 2005"
(code : C_TSCM62_05).
I need some help in preparing for this. If anyone could send me the types of questions being asked or the study material for prepartion , it would be appreciated.
You can send it at Removed by Moderator
Regards,
Chitra
Edited by: Lakshmipathi on Dec 7, 2009 7:31 PM
Please dont deviate the forum rules by asking to share any information to personal mails which is prohibitedMoved from sales forum
-
Is SAP offers solution consultant certfication for MDM 3.0 now?
Is SAP offering Solution Consultant Certification for SAP MDM 3.0?
i came to know from the link
https://websmp204.sap-ag.de/~sapidp/011000358700000588612005D
certification is planned for this second quarter for mdm 3.0.
just i want to know whether SAP offers solution consultant certification for MDM 3.0 for this year?
Thanks for reply,
cgSince the current release is MDM 5.5., I guess this information is not up-to-date.
Regards, Markus -
Hi,
in SAP B1 8.8, there is a new functionality when creating a new database " New from package" with extension .pak. anyone knows from where i can get this package?
thanksHello,
It is tool with the help of we can make package file for existing SAP company.
If you got solution then ok.
I just want to share that
first installed exe setup file which is in SAP Business One software folder.
Then go to Start >All Programes>SAP Busines One >Solution packager
select Solution Packager and make new package for othere same client.
After that you can select package from Solution Packager wizard and with the help we will make new fresh data
Thanks
Manvendra Singh Niranjan -
C_CR700_40 Solution Consultant CRM Service
Can you please help me with the following :
1) Do you have question dump(i.e a sample questionaire) for solution consultant CRM service certification .
2) List of SAP Course Materials required for the prep.None of the online SAP documentation seems to specify the proper requirements for the certification.
Thanks and regards,
Suki
Message was edited by:
Suki LalHi Suki,
Please check the following website:
https://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000078557
Then click on the CRM -> Service link in the learning map. You will then get an exact overview of the Consultant Training & Certification Program for CRM Service (and all other CRM certification trajectories).
Hope this helps.
Kind regards,
KZ -
FIT SAP e-Ledger Solution Documentation in english...
Hi Guys
I'm looking for E-Ledger Solution installation documentation in English because the only one i found at SAP's is in Turkish.... ;-)
Any help should be appreciated...
Thanks...Hi Bel,
You've to follow the following OSS Notes for installing SAP e-Ledger Solution:
1965087 - Release Note Electronic Ledger Management for Turkey 1.0 SP02
1870871 - Installation Electronic Ledger Management for Turkey 1.0
1995850 - E-Ledger for Turkey Consulting Note -
Hi
I want to know what kind of profile is Crm Solution Consultant and whether it's worth enough to take that career?Personally I would go into something else that is more customer centric. Have you considered becoming a "store-greeter"? I think you would find that role and software involved is much better implementation of customer relationship management and plus you wouldn't be stuck in a time warp living in the year 2007 if you went with SAP CRM 2007.
Think about the perks: smiley faces, price rollbacks, and great looking blue vests.
Good luck,
Stephen -
How to monitor all SAP Server through solution Manager?
Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
SachinHi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
After that you can include the systems using tcode <b>SMSY</b>.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v -
Pagefile for SAP Erp2005 and Solution Manager 4.0
Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
MorenoI agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |---- [PM] |---- [PM] |Mbyte |
|--- em/max_size_MB |--- 20000 |--- 100000 |Mbyte |
| em/address_space_MB |----- 512 |----- 4096 |Mbyte |
|---- ztta/roll_first |------- 1 |------- 1 |Byte |
|--- ztta/roll_area |--- 2000000 |--- 3000000 |Byte |
| ztta/roll_extension | 2000000000 | 2000000000 |Byte |
| abap/heap_area_dia | 2000000000 | 2000000000 |Byte |
| abap/heap_area_nondia | 2000000000 | 0 |Byte |
| abap/heap_area_total | 2000000000 |[PM]*1048576 |Byte |
|- rdisp/ROLL_MAXFS | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/ROLL_SHM | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/PG_MAXFS |--- 32768 |--- 32768 |8KB Block |
|----- rdisp/PG_SHM |
so... that [BE] value is not to be used. -
Hard time trying to 'Package Solution' - Access 2010 on Win 8.1 pro 64
I got myself a brand new system (win 8.1 pro 64) a while ago, and with it,
got a few problems as well. - If it makes any difference, I had an accdr and changed file extension to accdb, this is
the FE I'm trying to 'Package' now -
It happens that after installing Office Professional Plus 2010(not sure if
x86 or x64 - does it matter?), checking all the conditionals for MSAccess,
even repairing installation a bunch of times, no matter what,
whenever I try to 'Package Solution', there's always a boring message
at the end stating that, 'An unexpected error has occurred', period.
That's it!
I tried to move my files to documents folder, assuming that might be
caused by lack of permission, still nothing happens, other than the same
'An unexpected error has occurred', no additional info available.
Googling this, I could find one or another info, but people usually report
in common with my issue, just the error message, the whole context seems
to be pretty different. Anyway, never been thru such a thing, don't know
if I should install any hotfix, I reinstalled office a couple of times already,
nope! It's not working!
And I got this app release that's been waiting almost 1 week now to reach my customer,
in other words, big trouble!
So, I really could use some help, and I appreciate anybody who would kindly
lend me a hand on the matter of this subject.
Sorry if that sounds stupid, and thanks in advance!This is much I suggested using an accDE. You use the accDB to develop and create the application. When you compile to an accDE, then users cannot see or view VBA code, nor can they change reports or forms if they get “inside” the application.
So you most certainly will continue to use and develop using the accDB, but the “last” step before deployment is to first ensure you VBA code compiles (in the VBA editor, go debug-> compile). Once your sure code compiles, then you create the accDE that
you will include in your package to distribution to users. Do keep in mind that this suggest thus suggests your data is “split” or outside of the application you package else updates to users would overwrite their data.
So using an accDE means users cannot modify forms/reports, and also means that users cannot view code. This also eliminates the need for some kind of password system to prevent modifications to the application. so you can rename the accDE to a accDR, but
even if users re-name it back to a accDB or accDE, modifying to forms/reports and VBA code is NOT possible. This also means you do NOT want to lose your accDB that you are using for development.
I explain this concept of a split database here:
http://www.kallal.ca/Articles/split/index.htm
Regards,
Albert D. Kallal (Access MVP)
Edmonton, Alberta Canada -
Can i use the SAP standard package for lock object creation ?
Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AMHi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma -
SAP Digital signature solution in Invoice output PDF document
Hi,
We are trying to POC SAP Digital signature solution for Invoice output pdf document based on the OSS note 700495 implemengtation guide.
- Defining the log structure and database table.
- Defining signature single step and authorization group and assignment.
- Completed the configuration steps including system signature with authorization by SAP user id and password.
- Release strategy and Archiving NOT implemented for this solution as they are not required as of now.
Checked the above settings using DSIG_BOOKING_EX sample program and the same executed successfully without any errors and we can see the result 'Signature process was successfully completed by user XXXXXX'. Also we can view the signature log in DSAL Transaction.
Similar to the sample program code, Implemented the signature call in user exit ZXMCVU05(EXIT_SAPLMCS6_001) for Invoice output digital signature during VF01 create transaction.
In the process signature call processed successfully but the output PDF document does not have any signature.
Please let me know why digital signature NOT applied to invoice output pdf file. Is there any other process that need to be done?
Also if you have implemented any similar solution, please provide me the details on the same.
Thanks!Ritwika,
Are the User Name and Password correct? Is the User assigned to the SAP_XMII_User role in Netweaver? On the iCommand's Security screen, is the SAP_XMII_User assigned as a Reader role?
Have you checked the Netweaver log? There may be more detailed information there.
Kind Regards,
Diana
Edited by: Diana Hoppe on Mar 3, 2011 9:50 AM -
SAP Business one Solution Architect
Hi All,
What are criteria to become SAP Business one Solution Architect?
I have cleared both Solution and development exam. Can anybody suggest me the other exam ?
Thanks in advance
BBNare you implementing SAP B1 or SAP r/3. please post your message accordingly.
Maybe you are looking for
-
Release startegy of Service Entry Sheet
I configured release strategy for Service entry sheet with Release code 08. When i actually go to ML81N to release the same, i get same code in the drop down but when i select the same (08), it gives me "error Release with code 08 not possible", ins
-
The optic drive does not read the windows 7 install disk yet in Lion it sees the disk as a Windows DVD.
-
I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The star
-
Although I am a Finn I'm used to work in English. I hate it when tools have Finnish versions. I want to use English versions. So there must be a way to get an English version of Firefox even I happen to live in Finland. How do I get an English versio
-
Flat Panel LCD Computer Monitor Advice
I'm building an FCP workstation and have been thinking about what type of computer monitor to purchase. My current monitor is a bulky CRT, so if anyone has any advice as far as what to look for in an LCD or good brands that have worked well for you i